-
Date submitted2024-05-17
-
Date accepted2025-03-27
-
Date published2025-03-27
Determination of impact hazard potential of rocks in the Norilsk Industrial Region
The deeper the mineral deposits developments are, the worse the mining and geological conditions become. Significant growth of stress level in the rock mass contributes to possible manifestation of rock pressure in dynamic form. The resulting task of assessment of rock impact hazard is closely related to the task of obtaining more accurate results of compression tests of samples in rigid or servohydraulic test presses using graphs of their full deformation. This approach requires special expensive equipment, considerable time resources, and sufficient core material. Therefore, it is important to have an approach that allows to assess the propensity of rocks to brittle fracture with research methods simple enough not to result in the loss of quality and reliability of the obtained results. This paper presents the results of laboratory tests of rocks from the Norilsk Industrial Region to determine their tensile and compressive strengths. Test methods involved both domestic and foreign standards for determining the value of the brittleness coefficient. The impact hazard potential of rocks was determined using the Kaiser criterion. It is found that the tested lithological types (rich sulfide ores, hornblende, disseminated ores, and gabbro-dolerite rocks), with the exception of anhydrite, have a low impact hazard potential.
-
Date submitted2024-04-24
-
Date accepted2024-09-24
-
Date published2024-11-12
Study and justification of the combination of beneficiation processes for obtaining flake graphite from technogenic carbon-containing dusts
The most important task of modern production development is to provide the mineral and raw materials sector of the economy with resources included in the list of strategic raw materials, including flake graphite. In addition to natural raw materials, the source of its obtaining can be metallurgical production wastes not involved in processing. Development of metallurgical dust beneficiation technology will solve the problem of obtaining high-purity flake graphite with a crystal structure close to ideal and in demand in the production of high-tech materials. It will allow creating a renewable raw material base of graphite and utilising metallurgical production wastes. The research included the study of dust beneficiation by coarseness, magnetic and flotation methods, the influence of dust disintegration processes on beneficiation indicators. Based on the established technological properties of the components of dusts, magnetic, flotation and gravity beneficiation methods can be applied for their separation in different sequence. It is shown that dusts from different sites have different enrichability by these methods, and it should be taken into account when developing a complex technology of their processing. The degree of beneficiation increases in a row of dusts from the blast furnace shop (BF) – electric steel smelting shop (ESS) – oxygen-converter shop (OCS). The method of grinding has a significant influence on the separation indicators – at dry grinding in a centrifugal-impact mill with subsequent pneumatic classification the quality of graphite concentrates increases by 22.7 % of carbon for BF dust and by 13.48 % of carbon for ESS dust. OCS dust beneficiation indicators are high at coarse grinding with steel medium – mass fraction of carbon 96.1 %.
-
Date submitted2024-04-16
-
Date accepted2024-09-24
-
Date published2024-11-12
Deep-buried Lower Paleozoic oil and gas systems in eastern Siberian Platform: geological and geophysical characteristics, estimation of hydrocarbon resources
The study of deep-buried oil and gas systems is a promising trend in the preparation of hydrocarbon resources. The study of the factors determining oil and gas potential is extremely important. The Lena-Vilyui sedimentary basin in the eastern Siberian Platform has a potential for the discovery of large oil and gas fields in deep-buried Cambrian deposits. The use of original methodological approaches to the analysis of black shale and overlying deposits, generalization of the results of lithological, biostratigraphic and geochemical studies of Cambrian deposits in territories adjoining the study area, modern interpretation of geophysical data showed that siliceous, carbonate, mixed rocks (kerogen-mixtite) of the Kuonamka complex and clastic clinoform-built Mayan deposits are most interesting in terms of oil and gas potential. Oil and gas producing rocks of the Lower and Middle Cambrian Kuonamka complex subsided to the depths of 14 km. The interpretation of modern seismic surveying data confirms the hypothesis of a limited occurrence of the Upper Devonian Vilyui rift system. Based on generalization of geological, geophysical and geochemical archival and new materials on the Lower Paleozoic deposits of the eastern Siberian Platform, a probabilistic estimation of geological hydrocarbon resources of the Cambrian and younger Paleozoic complexes in the Lena-Vilyui sedimentary basin was performed. Based on basin modelling results it was concluded that the resources were mainly represented by gas. It is presumed that oil resources can be discovered in traps of the barrier reef system as well as on the Anabar and Aldan slopes of the Vilyui Hemisyneclise. With a confidence probability of 0.9, it can be stated that total initial resources of oil and gas (within the boundaries of the Vilyui Hemisyneclise) exceed 5 billion t of conventional hydrocarbons. The recommended extremely cautious estimate of resources of the pre-Permian complexes is 2.2 billion t of conventional hydrocarbons. In the study area, it is necessary to implement a program of deep and super-deep parametric drilling without which it is impossible to determine the oil and gas potential of the Lower Paleozoic.
-
Date submitted2023-11-01
-
Date accepted2024-05-02
-
Date published2024-12-25
Improving the procedure for group expert assessment in the analysis of professional risks in fuel and energy companies
The lack of a unified approach to the assessment of professional risks in fuel and energy companies (FEC) in the national regulatory environment and a high degree of subjectivity of the results of hazard identification and risk assessment makes mathematically sound recruitment of an expert group urgent and necessary. The article presents the results of a comprehensive study on hazard identification and risk assessment at 6,105 workplaces in 24 branches of a FEC company based on the application of the expert assessment method and a scientifically sound qualitative and quantitative selection of experts. The priority vectors of factors are determined, global priorities are calculated, the size of the expert group (15 persons) is determined and mathematically substantiated for carrying out hazard identification and risk assessment at workplaces with sufficient reliability of results. For the first time, a set of factors characterizing the FEC companies that influence the determination of professional competence of experts is proposed. The formed expert group presented more precise, objective and consistent results of risk assessment. Standards for free distribution of personal protective equipment (PPE) and wash-off agents to 7,234 company employees for implementation and trial use were developed. A fragment of the results obtained for a driller's workplace is presented. This approach allows a significant increase in objectivity and efficiency of the professional risk management system and provision of the PPE to employees in the concept of a risk-oriented approach helping to prevent industrial injuries and improve the level of occupational safety culture in fuel and energy companies taking into account global practice.
-
Date submitted2023-07-07
-
Date accepted2023-12-27
-
Date published2024-08-26
Landslide hazard assessment in Tinh Tuc town, Cao Bang province, Vietnam using Frequency ratio method and the combined Fractal-frequency ratio method
Landslides are one of the most frequent natural disasters that cause significant damage to property in Vietnam, which is characterized by mountainous terrain covering three-quarters of the territory. In 17 northern mountainous provinces of the country, over 500 communes are at a high to very high landslide hazard. The main goal of this study was to establish landslide hazard maps and conduct a comparative evaluation of the efficiency of the methods employed in Tinh Tuc town, Cao Bang province. The landslide hazard assessment was carried out in this study using the combined Fractal-frequency ratio (FFR) and the Frequency ratio (FR) methods. The FR method is based on the actualist principle, which assumes that future landslides may be caused by the same factors that contributed to slope failure in the past and present. The FFR method is based on the determination of the fractal dimension, which serves as a measure of the landslide filling density in the study area. Eight landslide-related factors were considered and presented in cartographic format: elevation, distance to roads, slope, geology, distance to faults, land use, slope aspect, and distance to drainage. Determining the area under the receiver operating characteristic curve (ROC-AUC) and verification index (LRclass) was performed to assess the performance of prediction models and the accuracy of the obtained maps. As a result, five zones were identified for the study area, characterized by very low, low, moderate, high, and very high landslide hazards. The analysis of the reliability of the obtained landslide hazard maps using the AUC and LRclass indices revealed that the FFR model has a higher degree of reliability (AUC = 86 %, LRclass = 86 %) compared to the FR model (AUC = 72 %, LRclass = 73 %); therefore, its use is more effective.
-
Date submitted2022-11-21
-
Date accepted2024-05-02
-
Date published2024-08-26
M1 formation tectono-structural features and gas-oil potential within Archinskaya area Paleozoic basement (Western Siberia)
- Authors:
- Vladimir B. Belozerov
- Mikhail O. Korovin
Western Siberian Plate basement oil and gas potential evaluation largely depends on structural and stratigraphic complex architecture representation. New modern procedures for seismic data processing, detailed Paleozoic deposits stratigraphic studies and expanded geophysical well logging significantly change the representation of the basement rocks fold-block structure and previously developed hydrocarbon reservoirs models. Detailed studies conducted within the Archinskii uplift showed that Paleozoic sediments form a contrasting folded structure complicated by block tectonics. The significant block displacements amplitude determines the lithological and stratigraphic basement rocks erosional-tectonic surface, while the identified stratigraphic blocks control the oil productivity distribution within the Archinskaya area. The filtration-capacity heterogeneity folded structure of the Paleozoic sediments is reflected in the distribution of hydrocarbon saturation in the well section, forming independent gas, oil, and oil-water zones for the development process. The relationship between anticlinal structural forms of basement rocks to lowered, and synclinal to elevated blocks, determines the necessity to conduct exploration prospecting within younger stratigraphic blocks when assessing the deep Paleozoic oil and gas potential.
-
Date submitted2023-04-13
-
Date accepted2023-10-25
-
Date published2025-02-25
Assessment of the ecological state of aquatic ecosystems by studying lake bottom sediments
- Authors:
- Mariya A. Chukaeva
- Tatyana V. Sapelko
The article presents the results of coupled palynological and geochemical studies of five various genesis lakes, located along the route of the expedition “In the footsteps of Alexander von Humboldt in Siberia, Altai and Eastern Kazakhstan”, dedicated to the double anniversary: the 190th anniversary of the expedition across Russia of the famous scientist and his 250th birthday. A geochemical analysis of water and bottom sediments of Ik Lake (Siberia), Lakes Kolyvanskoe and Beloe (Altai), Lake Bezymyannoe (Kazakhstan) and Nagornyi Pond (Altai) was carried out. Based on their results an assessment of studied lakes ecological state was given through single and integral criteria. A high level of pollution was noted for Nagornyi Pond and Lake Bezymyannoe, which is caused by a significant technogenic load from nearby mines. This is consistent with the data of palynological research. The aquatic ecosystems of Lakes Kolyvanskoe and Beloe are characterized by a satisfactory ecological situation, but they experience an increased recreational load. The results of spore-pollen analysis and analysis of non-pollen palynomorphs showed the low ability of these lakes to self-healing. The most favorable ecological state and high self-cleaning capacity were noted for Lake Ik, which is consistent with the data of palynological studies. It is being confirmed with the results of palynological studies. It was therefore concluded about the ability to make a quick assessment of the aquatic ecosystems’ ecological state by studying lakes using coupled palynological and geochemical analysis.
-
Date submitted2022-10-17
-
Date accepted2023-02-13
-
Date published2023-04-25
Environmental geotechnology for low-grade ore mining with the creation of conditions for the concurrent disposal of mining waste
Due to the constantly deteriorating environmental situation in the regions with mining enterprises, the article considers the topical issue of disposing the maximum possible volume of waste from the mining and processing of low-grade ferrous ores through the creation of an effective underground environmental geotechnology. Traditional procedure with descending mining of reserves with a caving system does not allow waste to be disposed of in a gob. The idea is to use geotechnology based on the ascending order of mining the ore body, room excavation, leaving truncated pillars, and staggered arrangement of adjacent rooms in height, which makes it possible to form containers for waste disposal in the form of a cementless backfill. The main characteristics of the proposed procedure are investigated and compared with the traditional procedure of low-grade iron ores mining. It was established that from the point of view of the complete extraction of reserves and the unit costs for the preparatory-development operations, the processes are comparable, while in terms of the mining quality, the proposed option is much more efficient. Evaluation of environmental geotechnology by the criterion of waste disposal, performed according to the proposed methodology, showed that the combination of these technical solutions ensures the placement in the formed gob from 80 to 140% of all waste generated during the mining and beneficiation of low-grade iron ores.
-
Date submitted2022-05-26
-
Date accepted2022-11-17
-
Date published2022-12-29
Renovation method of restoring well productivity using wavefields
A stagewise theoretical substantiation of the renovation vibrowave method of influencing the near-wellbore zone of reservoir for restoring well productivity is presented. The area of treatment by the proposed method covers the reservoir with a heterogeneous permeability with fractures formed by fracking. In this method a decrease in concentration of colmatants occurs due to a change in direction of contaminants migration. Under the influence of pressure pulses, they move deep into the reservoir and disperse through the proppant pack. The results of mathematical modelling of the propagation of pressure wave and velocity wave and the calculations of particles entrainment in wave motion are presented.
-
Date submitted2022-02-22
-
Date accepted2022-05-11
-
Date published2022-11-03
Scientific substantiation and development of innovative processes for the extraction of zirconium and rare earth elements in the deep and comprehensive treatment of eudialyte concentrate
- Authors:
- Valentin A. Chanturiya
Based on a package of modern analysis methods, the influence of various acids and energy effects on the morphology, elemental composition, structural and chemical transformations of the mineral surface, and the efficiency of eudialyte concentrate leaching was studied. The mechanism and the optimal conditions and specific features of the destruction of eudialyte and rock minerals and the extraction of zirconium and REE under the influence of various acids, powerful nanosecond pulses, dielectric barrier discharge, electrochemical processing, mechanochemical activation and ultrasound were revealed. The mechanism of formation and the optimal conditions for the dispersion of silica gel, depending on the methods and parameters of energy effects, was theoretically and experimentally substantiated. A combined three-stage circuit of nitric acid leaching of eudialyte concentrate with ultrasonic treatment of the suspension, providing 97.1 % extraction of zirconium and 94.5 % REE, were scientifically substantiated and tested. The conditions for the selective deposition of zirconium and REE were theoretically and experimentally substantiated.
-
Date submitted2022-06-01
-
Date accepted2022-09-06
-
Date published2022-11-10
Impact of EU carbon border adjustment mechanism on the economic efficiency of Russian oil refining
- Authors:
- Vladimir L. Ulanov
- Oleg N. Skorobogatko
The carbon border adjustment mechanism (CBAM) leads not only to the expected environmental changes, but also to the transformation of market environment. The study estimates the losses of the oil refining sector from the introduction of CBAM for the export of oil products from Russia to the countries of the European Union. An approach to assess the impact of CBAM on the cost of oil products has been formed and the mechanisms of its impact on the economy of Russian oil refineries have been identified. The study was carried out on the basis of actual data on the volume of greenhouse gas emissions in accordance with the current rules of the European emissions trading system. Decomposition of assessments of the CBAM impact was carried out into direct and indirect effects, as well as the effect of adaptation. It is shown that with the introduction of the CBAM mechanism, the prices of oil products in the domestic market will be determined not only by the logistical factor, but also by the requirements for environmental friendliness of oil refining. The introduction of CBAM will have a significant impact on the economics of oil refining, including refineries that do not export to the EU. The total impact of CBAM on the economy of Russian oil refineries will be about 250 mln dollars.
-
Date submitted2021-11-10
-
Date accepted2022-05-25
-
Date published2022-12-29
Predicting the permeability of the near-bottomhole zone during wave impact
The research reveals that during selection of a method to increase oil recovery it is necessary to take into account rheological features of fluid movement through the formation, effect of capillary forces and heterogeneity of reservoir properties of the productive formation in thickness and along the bedding. Low-frequency wave impact, which is used to increase production in oil fields, is considered. At low-frequency impact new fractures appear and existing fractures in rocks increase in size. The greatest increase in porosity and permeability of rocks occurs at an impact frequency up to 10 Hz. Dynamics of oscillation amplitude during wave's movement in saturated porous medium is studied in the paper: essential attenuation of amplitude occurs at distance up to 1 m from borehole axis. With increase of frequency from 1 to 10 Hz the intensity of amplitude's attenuation decreases. The technology was tested on a well in Perm region (Russia). The actual permeability value was 50 % higher than the predicted value. According to the results of hydrodynamic investigations processing, it was noted that the greatest increase of permeability took place near the wellbore, while away from the wellbore axis permeability remained almost unchanged. In order to refine the mathematical model for prediction of wave impact on rock permeability it is necessary to take into account interconnection of pore space structure, change of adhesion layer, as well as to study transfer of particles during vibration.
-
Date submitted2022-04-18
-
Date accepted2022-06-15
-
Date published2022-07-26
Results and prospects of geological mapping of the Arctic shelf of Russia
- Authors:
- Evgeny A. Gusev
The results of compiling the sets of the State Geological Map at a scale of 1:1,000,000 for the Arctic continental shelf of Russia are analyzed. Results are summed up, and the main problems of geological mapping are outlined. The results of geological and geophysical studies of the Arctic Ocean are of great importance for deciphering the geological evolution. The Arctic shelf is the widest shelf in the world, while the spreading ocean basin is one of the narrowest and is characterized by anomalous structural features. The main problems of geological mapping include identification the sedimentary cover/folded basement boundary, interpretation the geodynamic evolution of the shelf and adjacent ocean, determining the rates of sedimentation and stratigraphic subdivision of the sedimentary cover due to a small number of key boreholes. It is promising to further study problem areas with unclear features of geological structure as well as small-scale mapping in areas of industrial development on the Arctic continental shelf.
-
Date submitted2021-09-22
-
Date accepted2021-11-30
-
Date published2021-12-27
Possibilities for creating Russian high-tech bottomhole assembly
Development of high-tech well electronic measuring systems is aimed at creating modern equipment: telemetry, well geophysical measurement equipment, the architecture of which is divided into basic (with measurement channels for gamma logging and inductive resistance) and advanced (with radioactive, acoustic, magnetic resonance and thermobarometric measurement channels, including azimuthal methods of investigation). Over-the-bit measurement modules, rotary steerable systems are being developed and channels for transmitting data to the surface are being improved. Vice versa, specialized surface equipment with highly integrated software is being created. Different measurement modules are manufactured by different companies, which creates uncertainties in the possibility of interfacing the manufacturers' measurement modules into a single well measurement system. The article presents an analysis of the readiness of Russian oil service companies to produce well and surface equipment for drilling Russian directional oil and gas wells, meeting modern requirements for accuracy, lifetime and operating conditions. The possibility of creating a fully Russian well high-tech equipment and the required resources, risks and measures to mitigate them when creating a modern well measurement system are considered.
-
Date submitted2021-11-30
-
Date accepted2021-11-30
-
Date published2021-12-27
Innovative ways to control dust and explosion safety of mine workings
Ensuring dust and explosion safety during underground coal mining is one of the most important tasks of industrial safety and labor protection departments. The main method of preventing explosions of coal dust settled in mine workings is to process them with stone dust (rock dusting). The traditional methods of quality control of rock dusting include radioisotope, optical and chemical methods. To implement them, the devices are equipped with environmentally harmful radioactive elements, expensive optical sensors, desiccants and replaceable flasks with chemical reagents, which increases the cost of analysis and its duration. The measurement error of these devices is 10 % or more. The main purpose of the study is to develop and substantiate a new method for monitoring the dust and explosion safety of mine workings, which will be devoid of the disadvantages of the methods mentioned above. It is proposed to evaluate the quality of rock-dust distribution by a fundamentally new way – thermogravimetric. The method was tested on the dust of coal mines in Kuzbass and the Vorkuta basin, including dust samples taken in mines with actual explosions. The article presents the results of experimental studies of the processes of thermal destruction of coal and stone dust mixtures. The non-overlapping intervals of the thermogravimetric reaction are identified: moisture yield (35-132 °С); volatile matter yield from coal (380-580 °С); thermal degradation of limestone with carbon dioxide yield (650-850 °С). Methods and mathematical dependencies for processing significant and qualitative identification characteristics of thermogravimetric curves in determining the content of non-combustible components in a sample of mine dust are considered.
-
Date submitted2020-05-16
-
Date accepted2020-07-30
-
Date published2020-12-29
Results of the study of kinetic parameters of spontaneous combustion of coal dust
The article is devoted to the study of the problem of spontaneous combustion of energy grades of coal not only during storage, but also during transportation. As the main samples for the study, the energy grades of SS and Zh coals were selected. The main task of the scientific research was to study the rate of cooling and heating of coal depending on their thermophysical parameters and environmental parameters. To solve this problem, the authors used both the author's installations designed to study the thermophysical parameters of the spontaneous combustion process (the Ya.S.Kiselev method), and the NETZSCH STA 449 F3 Jupiter synchronous thermal analysis device, the NETZSCH Proteus Termal Analysis software package. On the basis of a complex study of the spontaneous combustion process, the authors of the article obtained the kinetic characteristics of the spontaneous heating process (activation energy and pre-exponential multiplier). Nomograms of the permissible size of coal density of different types and shapes of accumulation depending on the ambient temperature are presented, practical recommendations for the prevention (avoidance) of spontaneous combustion of coal fuel are given.
-
Date submitted2020-05-25
-
Date accepted2020-06-11
-
Date published2020-12-29
Technological aspects of cased wells construction with cyclical-flow transportation of rock
- Authors:
- Andrei S. Kondratenko
A high-performance technology for constructing cased wells is proposed. Essence of the technology is the advance insertion of the casing pipe into the sedimentary rock mass and the cyclical-flow transportation of the soil rock portions using the compressed air pressure supplied to the open bottomhole end of the pipe through a separate line. Results of mathematical modeling for the process of impact insertion of a hollow pipe into a soil mass in horizontal and vertical settings are considered. Modeling of the technology is implemented by the finite element method in the ANSYS Mechanical software. Parameters of the pipe insertion in the sedimentary rock mass are determined - value of the cleaning step and the impact energy required to insert the pipe at a given depth. Calculations were performed for pipes with a diameter from 325 to 730 mm. Insertion coefficient is introduced, which characterizes the resistance of rocks to destruction during the dynamic penetration of the casing pipe in one impact blow of the pneumatic hammer. An overview of the prospects for the application of the proposed technology in geological exploration, when conducting horizontal wells of a small cross-section using a trenchless method of construction and borehole methods of mining, is presented. A variant of using the technology for determining the strength properties of rocks is proposed. Some features of the technology application at industrial facilities of the construction and mining industry are considered: for trenchless laying of underground utilities and for installing starting conductors when constructing degassing wells from the surface in coal deposits. Results of a technical and economic assessment of the proposed technology efficiency when installing starting conductors in sedimentary rocks at mining allotments of coal mines are presented.
-
Date submitted2019-03-25
-
Date accepted2019-05-23
-
Date published2019-08-23
Assessment of Rock-Burst Hazard in Deep Layer Mining at Nikolayevskoye Field
The paper presents results of conducted research using regional and local methods of forecast and control over geomechanical state of the rock mass at burst-hazardous Nikolayevskoye field, located in a geodynamically active region. The study subject is the ore mass of Nikolayevskoye field, characterized by man-induced and tectonic disturbances and high geodynamic activity. The aim of research was practical implementation of methods and instruments of forecast and control over geomechanical state of the burst-hazardous rock mass and safety improvement of mining operations. Exploitation practice of burst-hazardous fields demonstrates that forecast accuracy of hazardous rock pressure demands cutting-edge multi-level systems, where local methods and tools complement regional ones. A regional forecast of rock-burst hazard at Nikolayevskoye field was performed by means of seismoacoustic method using automated control system for rock pressure (ACSRP) «Prognoz-АDS». Local forecast was carried out using «Prognoz-L» device, geophysical (sample disking) method and visual observations of dynamic pressure manifestations in the mining tunnels. Quality assessment of stress-strain and burst state of the rock mass was performed using specialized software «PRESS 3D URAL». Integration of engineering and geomechanical data in the process of conducting research guarantees a relevant assessment of rock-burst hazard in various areas of the field at various stages of its development. Practical verification of the system, where local methods and tools complement regional ones, demonstrated satisfactory results at Nikolayevskoye mining plant, which makes it recommendable for other mining facilities extracting ore at great depths under similar conditions of active geodynamic processes.
-
Date submitted2018-11-03
-
Date accepted2019-01-21
-
Date published2019-04-23
Estimation of critical depth of deposits by rock bump hazard condition
- Authors:
- V. N. Tyupin
During the development of minerals by the underground method, dynamic manifestations of rock pressure occur at a certain depth, which significantly reduces the safety of mining operations. Regulatory documents prescribe at the exploration and design stages to establish the critical depth for classifying a deposit as liable to rock bumps. Currently, there are a number, mainly instrumental, methods for determining the liability of rock mass to rock bumps and methods based on the determination of physical and technical properties and the stress-strain state of rock massifs. The paper proposes a theoretical method for determining the critical depth for classifying a deposit as liable to rock bumps. A formula for determining the critical depth of the rock bump hazard condition is obtained. A mathematical analysis of the influence of the physical and technical parameters of the formula on the critical depth is carried out. Its physical and mathematical validity is substantiated. The numerical calculations of the critical depth for 17 developed fields were carried out using a simplified formula. It also provides a comparison of calculated and actual critical depth values. It is established that the variation of the actual and calculated critical depth is due to the lack of actual data on the value of the friction coefficient and parameters of fracturing of the rock mass in the simplified formula. A simplified calculation formula can be used to estimate the critical depth of a field at the survey and design stages. More accurate results can be obtained if there are actual data on fracture parameters, friction coefficients and stress concentration near the working areas.
-
Date submitted2018-07-18
-
Date accepted2018-09-22
-
Date published2018-12-21
Forecasting rock burst hazard of tectonically disturbed ore massif at the deep horizons of Nikolaevskoe polymetallis deposit
- Authors:
- D. V. Sidorov
- M. I. Potapchuk
- A. V. Sidlyar
The subject of the research is the stress-strain and rock burst hazardous state of the ore massif of the Nikolaevskoe polymetallic deposit, formed under the influence of complex mining-geological and mining-technical factors. The purpose of the research is to establish the peculiarities of the formation of technogenic stress fields at the deposit, which is characterized by a block structure, a complex tectonic system and the presence of a large volume of developed spaces. Volumetric geodynamic modeling of the stress-strain state of the massif at different stages of the development of the deep horizons of the deposit was carried out by collecting information on the structure, properties and geodynamic state of the rock mass. The assessment of stress changes taking into account the effect of hypsometry, the configuration of the selvages, the physical-mechanical properties of the ore deposit and host rocks, the presence of tectonic disturbances was made using the developed numerical algorithms, the automation equipment of the initial data and the PRESS 3D URAL software. The simulation made it possible to establish that tectonic faults in the massif lead to a qualitative change in the stress-strain state in certain parts of the ore massif and in the pillars, namely, the reduction of stresses along the tectonic faults and their growth in nearby pillars. The identified features of the distribution of stresses in the tectonically disturbed rock massif of the Nikolaevskoe deposit will allow to identify in advance potentially hazardous areas both at the planning stage of mining operations and during development, as well as to work out effective rock burst measures to increase the safety of mining. The results of research can be used in enterprises with similar mining-geological and mining-technical conditions.
-
Date submitted2018-05-03
-
Date accepted2018-07-07
-
Date published2018-10-24
Regularities of material destruction of the impactor in repeated single punch
- Authors:
- V. I. Bolobov
- Le Tkhan' Bin
The technique and the results of experiments on the study of the laws of the process of the cone-shaped tip of a freely falling impactor made of 38HM, U8, H12MF steels, subjected to typical heat treatment and additionally treated with cold, when they apply multiple (up to 10000) single impacts on granite under conditions approaching hydraulic impactor peaks. To explain the processes, we used the values of stresses σ к , arising at the contact area of the impactor and the rock, calculated using the developed mathematical model. It has been established that the process of wear of an impactor with multiple single blows proceeds in three stages separated by critical values, , which correspond to the strength characteristics of the material of the impactor demonstrated in these dynamic conditions. With a small number of strokes (n ≤ n * ) and the small size of the blunting area (stage I interaction) values σ c exceed of steel and it is exposed to local destruction at the contact site, which is recorded as a significant loss of the impactor’s mass; with n * < n ≤ n ** (stage II) the resulting stresses are not enough to destroy the material, but it is enough for its plastic deformation, accompanied by the movement of metal from the central part of the contact area to the peripheral and the destruction of part of the deformed metal by rock; with n > n ** (stage III) arising σ к do not reach the level and the decrease in the mass of the impactor is determined by the resistance of the steel to abrasion by the products of rock destruction, displaced by the impactor from the well. The treatment of impactors from all tested steels with cold leads to an increase in their wear resistance; The total depth of the holes punctured by the cold-treated H12MF steel impactor at the time of the interruption of the rock penetration is four times higher than that of the 38HM steel impactor subjected to typical heat treatment.
-
Date submitted2016-09-23
-
Date accepted2016-11-18
-
Date published2017-02-22
Principles of assessment and management approaches to innovation potential of coal industry enterprises
- Authors:
- A. V. Kozlov
- A. B. Teslya
- Sya Chzhan
This paper examines problems related to forming a complex of indicators to assess innovation potential of an industrial enterprise, on the example of coal industry enterprises, and an integral indicator of innovation potential, used for comparative analysis of the state of affairs in the industry. Analysis of different approaches to defining the term «innovation potential» for industrial enterprises has been carried out; resource-based, resultative, integrative and capacitive approaches have been highlighted, the latter one based on assessment of enterprise capacities. A conclusion has been made regarding advantages of integrative approach. Research has been made on the role of industry in the fuel and power sector of China and dynamics of industry and enterprise development in Shanxi province. Basing on suggested approach a system of assessment principles has been formulated, taking into account specific features of coal industry enterprises. Complex of indicators to assess innovation potential has been developed using expert evaluation method. An expertise procedure is proposed to assess competence of experts; results obtained from the expertise are presented. Proposed complex of indicators includes 23 parameters combined into three groups. Testing of proposed complex of indicators has been carried out on the example of coal industry in Shanxi province (China). Application of all stated principles has been proved in the process of indicator selection, assessment and formulation of recommendations for subsequent innovation potential management of coal industry enterprises. Proposed approach to forming a complex of indicators of innovation potential for industry enterprises permits to link together the logic of innovation potential definition, formation of the system of its principles, selection of the indicators complex for assessment and subsequent innovation potential management of the enterprise.
-
Date submitted2016-09-04
-
Date accepted2016-11-14
-
Date published2017-02-22
Methodology of reducing rock bump hazard during room and rillar mining of North Ural deep bauxite deposits
- Authors:
- D. V. Sidorov
The article describes practical experience of using room and pillar mining (RAPM) under conditions of deep horizons and dynamic overburden pressure. It was identified that methods of rock pressure control efficient at high horizons do not meet safety requirements when working at existing depths, that is explained by changes in geodynamic processes during mining. With deeper depth, the geodynamic processes become more intensive and number of pillar and roof failures increase. When working at 800 m the breakage of mine structures became massive and unpredictable, which paused a question of development and implementation of tools for compliance assessment of used elements of RAPM and mining, geological, technical and geodynamic conditions of North Ural bauxite deposits and further development of guidelines for safe mining under conditions of deep horizons and dynamic rock pressure. It describes reasons of mine structure failures in workings depending on natural and man-caused factors, determines possible hazards and objects of geomechanic support. It also includes compliance assessment of tools used for calculations of RAPM structures, forecast and measures for rock tectonic bursts at mines of OAO “Sevuralboksitruda” (SUBR). It describes modernization and development of new geomechanic support of RAPM considering natural and technogenic hazards. The article presents results of experimental testing of new parameters of RAPM construction elements of SUBR mines. It has data on industrial implementation of developed regulatory and guideline documents at these mines for identification of valid parameters of RAPM elements at deep depths.
-
Date submitted2015-12-10
-
Date accepted2016-02-16
-
Date published2016-12-23
Research into the innovative potential of an oil and gas company at different stages of field development
- Authors:
- A. E. Cherepovitsyn
- A. Kraslavski
The paper presents an overview of research into the methods and principles used to assess the innovative potential of an oil and gas company. The validation is provided for the conceptual framework of the innovative potential, which is characterized by a combination of resources having a specific value for the oil and gas sector. The paper gives a detailed overview of the resources, which determine the innovative potential of the oil and gas company. A system of indicators for assessing the innovative potential of the oil and gas company, including six indicator groups, has been proposed. Key distinctive features of the oil and gas company technological development have been determined based on the use of potential for innovation at different stages of the field development. Technical and economic indicators of the oil field development at different stages are described. A concept of Intelligent Field technology is outlined, representing an innovative system, implementation of which determines a level to which the potential for innovation of the oil and gas company is tapped.
-
Date submitted2014-11-27
-
Date accepted2015-01-15
-
Date published2015-10-26
Socio-economic potential of large-scale projects to develop offshore oil and gas: risks and stakeholder expectations
- Authors:
- A. E. Cherepovitsyn
The development of the Arctic shelf is a strategic long-term objective of the energy development of the Russian Federation. At the present time, resource and economic potential of offshore oil and gas development projects is huge. However, it is constrained by the complexity of developing offshore oil and gas resources due to climatic, geological and technological conditions. In addition, the current unstable situation with world oil prices is also a constraint on largescale involvement in the industrial development of offshore oil and gas resources. The aim of the research is to determine socioeconomic potential of large-scale projects to develop oil fields in the Arctic shelf of Russia. The article presents the peculiarities of developing offshore fields, which are characterized by severe climatic conditions, high environmental risks, unique technological solutions, lack of infrastructure in coastal areas. A comparative analysis of projects to develop land and shelf is performed. The regional authorities’ and businesses capability of implementing large-scale projects to develop offshore fields on economic, social and environmental criteria is identified. The positive and negative effects of socio-economic development of the territory implementing projects of hydrocarbon field development are evaluated. A schematic diagram of the socio-economic potential of hydrocarbon resources development projects reflecting the opportunities and risks of such projects from the perspective of key stakeholders is developed. A set of strategic objectives to successfully implement projects in the Arctic shelf of Russia are proposed. The findings of the research can be used by the departments of energy, industry and mineral resources in the preparation of long-term strategic development programs for the oil and gas industry.