-
Date submitted2024-05-17
-
Date accepted2025-01-28
-
Date published2025-03-27
Determination of impact hazard potential of rocks in the Norilsk Industrial Region
The deeper the mineral deposits developments are, the worse the mining and geological conditions become. Significant growth of stress level in the rock mass contributes to possible manifestation of rock pressure in dynamic form. The resulting task of assessment of rock impact hazard is closely related to the task of obtaining more accurate results of compression tests of samples in rigid or servohydraulic test presses using graphs of their full deformation. This approach requires special expensive equipment, considerable time resources, and sufficient core material. Therefore, it is important to have an approach that allows to assess the propensity of rocks to brittle fracture with research methods simple enough not to result in the loss of quality and reliability of the obtained results. This paper presents the results of laboratory tests of rocks from the Norilsk Industrial Region to determine their tensile and compressive strengths. Test methods involved both domestic and foreign standards for determining the value of the brittleness coefficient. The impact hazard potential of rocks was determined using the Kaiser criterion. It is found that the tested lithological types (rich sulfide ores, hornblende, disseminated ores, and gabbro-dolerite rocks), with the exception of anhydrite, have a low impact hazard potential.
-
Date submitted2023-11-01
-
Date accepted2024-05-02
-
Date published2024-12-25
Improving the procedure for group expert assessment in the analysis of professional risks in fuel and energy companies
The lack of a unified approach to the assessment of professional risks in fuel and energy companies (FEC) in the national regulatory environment and a high degree of subjectivity of the results of hazard identification and risk assessment makes mathematically sound recruitment of an expert group urgent and necessary. The article presents the results of a comprehensive study on hazard identification and risk assessment at 6,105 workplaces in 24 branches of a FEC company based on the application of the expert assessment method and a scientifically sound qualitative and quantitative selection of experts. The priority vectors of factors are determined, global priorities are calculated, the size of the expert group (15 persons) is determined and mathematically substantiated for carrying out hazard identification and risk assessment at workplaces with sufficient reliability of results. For the first time, a set of factors characterizing the FEC companies that influence the determination of professional competence of experts is proposed. The formed expert group presented more precise, objective and consistent results of risk assessment. Standards for free distribution of personal protective equipment (PPE) and wash-off agents to 7,234 company employees for implementation and trial use were developed. A fragment of the results obtained for a driller's workplace is presented. This approach allows a significant increase in objectivity and efficiency of the professional risk management system and provision of the PPE to employees in the concept of a risk-oriented approach helping to prevent industrial injuries and improve the level of occupational safety culture in fuel and energy companies taking into account global practice.
-
Date submitted2023-07-07
-
Date accepted2023-12-27
-
Date published2024-08-26
Landslide hazard assessment in Tinh Tuc town, Cao Bang province, Vietnam using Frequency ratio method and the combined Fractal-frequency ratio method
Landslides are one of the most frequent natural disasters that cause significant damage to property in Vietnam, which is characterized by mountainous terrain covering three-quarters of the territory. In 17 northern mountainous provinces of the country, over 500 communes are at a high to very high landslide hazard. The main goal of this study was to establish landslide hazard maps and conduct a comparative evaluation of the efficiency of the methods employed in Tinh Tuc town, Cao Bang province. The landslide hazard assessment was carried out in this study using the combined Fractal-frequency ratio (FFR) and the Frequency ratio (FR) methods. The FR method is based on the actualist principle, which assumes that future landslides may be caused by the same factors that contributed to slope failure in the past and present. The FFR method is based on the determination of the fractal dimension, which serves as a measure of the landslide filling density in the study area. Eight landslide-related factors were considered and presented in cartographic format: elevation, distance to roads, slope, geology, distance to faults, land use, slope aspect, and distance to drainage. Determining the area under the receiver operating characteristic curve (ROC-AUC) and verification index (LRclass) was performed to assess the performance of prediction models and the accuracy of the obtained maps. As a result, five zones were identified for the study area, characterized by very low, low, moderate, high, and very high landslide hazards. The analysis of the reliability of the obtained landslide hazard maps using the AUC and LRclass indices revealed that the FFR model has a higher degree of reliability (AUC = 86 %, LRclass = 86 %) compared to the FR model (AUC = 72 %, LRclass = 73 %); therefore, its use is more effective.
-
Date submitted2021-11-30
-
Date accepted2021-11-30
-
Date published2021-12-27
Innovative ways to control dust and explosion safety of mine workings
Ensuring dust and explosion safety during underground coal mining is one of the most important tasks of industrial safety and labor protection departments. The main method of preventing explosions of coal dust settled in mine workings is to process them with stone dust (rock dusting). The traditional methods of quality control of rock dusting include radioisotope, optical and chemical methods. To implement them, the devices are equipped with environmentally harmful radioactive elements, expensive optical sensors, desiccants and replaceable flasks with chemical reagents, which increases the cost of analysis and its duration. The measurement error of these devices is 10 % or more. The main purpose of the study is to develop and substantiate a new method for monitoring the dust and explosion safety of mine workings, which will be devoid of the disadvantages of the methods mentioned above. It is proposed to evaluate the quality of rock-dust distribution by a fundamentally new way – thermogravimetric. The method was tested on the dust of coal mines in Kuzbass and the Vorkuta basin, including dust samples taken in mines with actual explosions. The article presents the results of experimental studies of the processes of thermal destruction of coal and stone dust mixtures. The non-overlapping intervals of the thermogravimetric reaction are identified: moisture yield (35-132 °С); volatile matter yield from coal (380-580 °С); thermal degradation of limestone with carbon dioxide yield (650-850 °С). Methods and mathematical dependencies for processing significant and qualitative identification characteristics of thermogravimetric curves in determining the content of non-combustible components in a sample of mine dust are considered.
-
Date submitted2020-05-16
-
Date accepted2020-07-30
-
Date published2020-12-29
Results of the study of kinetic parameters of spontaneous combustion of coal dust
The article is devoted to the study of the problem of spontaneous combustion of energy grades of coal not only during storage, but also during transportation. As the main samples for the study, the energy grades of SS and Zh coals were selected. The main task of the scientific research was to study the rate of cooling and heating of coal depending on their thermophysical parameters and environmental parameters. To solve this problem, the authors used both the author's installations designed to study the thermophysical parameters of the spontaneous combustion process (the Ya.S.Kiselev method), and the NETZSCH STA 449 F3 Jupiter synchronous thermal analysis device, the NETZSCH Proteus Termal Analysis software package. On the basis of a complex study of the spontaneous combustion process, the authors of the article obtained the kinetic characteristics of the spontaneous heating process (activation energy and pre-exponential multiplier). Nomograms of the permissible size of coal density of different types and shapes of accumulation depending on the ambient temperature are presented, practical recommendations for the prevention (avoidance) of spontaneous combustion of coal fuel are given.
-
Date submitted2019-03-25
-
Date accepted2019-05-23
-
Date published2019-08-23
Assessment of Rock-Burst Hazard in Deep Layer Mining at Nikolayevskoye Field
The paper presents results of conducted research using regional and local methods of forecast and control over geomechanical state of the rock mass at burst-hazardous Nikolayevskoye field, located in a geodynamically active region. The study subject is the ore mass of Nikolayevskoye field, characterized by man-induced and tectonic disturbances and high geodynamic activity. The aim of research was practical implementation of methods and instruments of forecast and control over geomechanical state of the burst-hazardous rock mass and safety improvement of mining operations. Exploitation practice of burst-hazardous fields demonstrates that forecast accuracy of hazardous rock pressure demands cutting-edge multi-level systems, where local methods and tools complement regional ones. A regional forecast of rock-burst hazard at Nikolayevskoye field was performed by means of seismoacoustic method using automated control system for rock pressure (ACSRP) «Prognoz-АDS». Local forecast was carried out using «Prognoz-L» device, geophysical (sample disking) method and visual observations of dynamic pressure manifestations in the mining tunnels. Quality assessment of stress-strain and burst state of the rock mass was performed using specialized software «PRESS 3D URAL». Integration of engineering and geomechanical data in the process of conducting research guarantees a relevant assessment of rock-burst hazard in various areas of the field at various stages of its development. Practical verification of the system, where local methods and tools complement regional ones, demonstrated satisfactory results at Nikolayevskoye mining plant, which makes it recommendable for other mining facilities extracting ore at great depths under similar conditions of active geodynamic processes.
-
Date submitted2018-11-03
-
Date accepted2019-01-21
-
Date published2019-04-23
Estimation of critical depth of deposits by rock bump hazard condition
- Authors:
- V. N. Tyupin
During the development of minerals by the underground method, dynamic manifestations of rock pressure occur at a certain depth, which significantly reduces the safety of mining operations. Regulatory documents prescribe at the exploration and design stages to establish the critical depth for classifying a deposit as liable to rock bumps. Currently, there are a number, mainly instrumental, methods for determining the liability of rock mass to rock bumps and methods based on the determination of physical and technical properties and the stress-strain state of rock massifs. The paper proposes a theoretical method for determining the critical depth for classifying a deposit as liable to rock bumps. A formula for determining the critical depth of the rock bump hazard condition is obtained. A mathematical analysis of the influence of the physical and technical parameters of the formula on the critical depth is carried out. Its physical and mathematical validity is substantiated. The numerical calculations of the critical depth for 17 developed fields were carried out using a simplified formula. It also provides a comparison of calculated and actual critical depth values. It is established that the variation of the actual and calculated critical depth is due to the lack of actual data on the value of the friction coefficient and parameters of fracturing of the rock mass in the simplified formula. A simplified calculation formula can be used to estimate the critical depth of a field at the survey and design stages. More accurate results can be obtained if there are actual data on fracture parameters, friction coefficients and stress concentration near the working areas.
-
Date submitted2018-07-18
-
Date accepted2018-09-22
-
Date published2018-12-21
Forecasting rock burst hazard of tectonically disturbed ore massif at the deep horizons of Nikolaevskoe polymetallis deposit
- Authors:
- D. V. Sidorov
- M. I. Potapchuk
- A. V. Sidlyar
The subject of the research is the stress-strain and rock burst hazardous state of the ore massif of the Nikolaevskoe polymetallic deposit, formed under the influence of complex mining-geological and mining-technical factors. The purpose of the research is to establish the peculiarities of the formation of technogenic stress fields at the deposit, which is characterized by a block structure, a complex tectonic system and the presence of a large volume of developed spaces. Volumetric geodynamic modeling of the stress-strain state of the massif at different stages of the development of the deep horizons of the deposit was carried out by collecting information on the structure, properties and geodynamic state of the rock mass. The assessment of stress changes taking into account the effect of hypsometry, the configuration of the selvages, the physical-mechanical properties of the ore deposit and host rocks, the presence of tectonic disturbances was made using the developed numerical algorithms, the automation equipment of the initial data and the PRESS 3D URAL software. The simulation made it possible to establish that tectonic faults in the massif lead to a qualitative change in the stress-strain state in certain parts of the ore massif and in the pillars, namely, the reduction of stresses along the tectonic faults and their growth in nearby pillars. The identified features of the distribution of stresses in the tectonically disturbed rock massif of the Nikolaevskoe deposit will allow to identify in advance potentially hazardous areas both at the planning stage of mining operations and during development, as well as to work out effective rock burst measures to increase the safety of mining. The results of research can be used in enterprises with similar mining-geological and mining-technical conditions.
-
Date submitted2016-09-04
-
Date accepted2016-11-14
-
Date published2017-02-22
Methodology of reducing rock bump hazard during room and rillar mining of North Ural deep bauxite deposits
- Authors:
- D. V. Sidorov
The article describes practical experience of using room and pillar mining (RAPM) under conditions of deep horizons and dynamic overburden pressure. It was identified that methods of rock pressure control efficient at high horizons do not meet safety requirements when working at existing depths, that is explained by changes in geodynamic processes during mining. With deeper depth, the geodynamic processes become more intensive and number of pillar and roof failures increase. When working at 800 m the breakage of mine structures became massive and unpredictable, which paused a question of development and implementation of tools for compliance assessment of used elements of RAPM and mining, geological, technical and geodynamic conditions of North Ural bauxite deposits and further development of guidelines for safe mining under conditions of deep horizons and dynamic rock pressure. It describes reasons of mine structure failures in workings depending on natural and man-caused factors, determines possible hazards and objects of geomechanic support. It also includes compliance assessment of tools used for calculations of RAPM structures, forecast and measures for rock tectonic bursts at mines of OAO “Sevuralboksitruda” (SUBR). It describes modernization and development of new geomechanic support of RAPM considering natural and technogenic hazards. The article presents results of experimental testing of new parameters of RAPM construction elements of SUBR mines. It has data on industrial implementation of developed regulatory and guideline documents at these mines for identification of valid parameters of RAPM elements at deep depths.
-
Date submitted2010-07-17
-
Date accepted2010-09-02
-
Date published2011-03-21
Selection of parameters camouflet blasting to reduce bump hazard by development uranium deposits
- Authors:
- D. Yu. Dordzhiev
Simulation-based by the finite element values obtained stress strain state around the stope ore as ore body downstream horizontal layers with a mined-out space. The results of the simulation allowed to substantiate a contained blasting parameters to bring pillar to anti bump hazard state.
-
Date submitted2009-10-25
-
Date accepted2009-12-19
-
Date published2010-09-22
Principal technologies for prevention of natural dangers at coal mines
- Authors:
- Jozef Dubinsky
Modern mining of mineral resources to be the industry accepted by the society must meet the criteria for sustainable development. Work safety is its important element, which is a particular sphere in underground coal mines in the view of natural hazards occurring numerously, including the catastrophic failures. Among them are gas hazard, fires and rock burst hazard. The selected methodological solutions in terms of their recognition and technologies applicable for the actively combat of these threats, which are featured by high efficiency, have been pointed out.
-
Date submitted2009-10-05
-
Date accepted2009-12-05
-
Date published2010-09-22
Control of rock mass state in mining the sections at mines оf the Vorkutaugol JST: up-to-date practice
- Authors:
- O. V. Yamenko
- I. E. Plisko
The article briefly outlines the methods and measures used at mines of the Vorkutaugol JSC to control the stress strain state of rock massif. These measures help to increase face load and to ensure mine safety.
-
Date submitted2009-10-18
-
Date accepted2009-12-05
-
Date published2010-09-22
Assessment of the role of geodynamic factor in the accident rate of pipeline systems
- Authors:
- E. K. Melnikov
- A. N. Shabarov
The authors relate to the geodynamically active faults those faults with continuous up to present time low-amplitude movements which lead to the destructurization both of bedding rocks and of Quarternary deposits. The electrogeochemical processes proceeding in the zones of such faults, promote the metal corrosion that basically is the cause of increasing a few tens of times of specific accident rate at sites of active faults crossing with pipelines.
-
Date submitted2009-10-22
-
Date accepted2009-12-27
-
Date published2010-09-22
Preconditions for prediction of technogenic seismic activity by cycles of objects of the solar system
- Authors:
- B. G. Tarasov
- A. G. Olovianny
- L. V. Bugaenko
The paper contains the statistical rows of rockbursts, sudden outbursts of methane at coal mines and ore mines in Russia for the period from 1954 to 2007, as well as the reflection in them of the eleven-year cycles of the Sun activity. Some results are presented of computer modeling of activation periods of outburst-hazardous state of rock mass at coal mines of the Kuzbass basin. Recommendations are given.
-
Date submitted2009-10-13
-
Date accepted2009-12-14
-
Date published2010-09-22
The evaluation of geodynamic consequences оf long-term exploration of lower cretaceous sediments at the Yamburg oil-gas condensate field with join of additional wells
Within the framework of the engineering design of the join up of additional wells of Lower Cretaceous sediments at the Yamburg oil-gas condensate field the evaluation of geodynamic consequences of long-term exploitation of the mentioned field was performed, as well as the hazardous geodynamic process permanent survey program was developed.
-
Date submitted2009-10-10
-
Date accepted2009-12-02
-
Date published2010-09-22
Deformational precursors of technogenic earthquakes in mining the hydrocarbon deposits
During monitoring since 2005 to 2008 at the Astrakhan gas-field it has been recorded three technogenic earthquakes. Results of geodetic levelling for the given period allow to approve that seismic event is preceded by raisings of a surface and its subsequent subsidence as a its result of unloading. That allows to use geodetic levelling for the forecast of technogenic seismic phenomena for oil and gas fields.
-
Date submitted2009-10-21
-
Date accepted2009-12-26
-
Date published2010-09-22
Modeling of geomechanical processes in mining the steeply pitching ore bodies of rockburst-hazardous deposits
The article contains the results of numerical modeling of stress-strain state in constructive elements of mining systems, applied at hazardous and prone to rook bursts deposits of the Far-East. Consideration is given to some stated regularities of forming of teсhnogenic stress field and geomechanical processes proceeding in rock mass of minable deposits which allow to substantiate a сomplex of measures for prevention of dynamic rock pressure manifestations.
-
Date submitted2009-10-12
-
Date accepted2009-12-19
-
Date published2010-09-22
Preventive measures of gas-dynamic phenomena in the workings drivage on the rockburst- outburst-hazardous seams under extremely complicated geological and mining conditions
- Authors:
- V. P. Kostromin
A complex of measures preventing the manifestation of rockbursts and sudden outbursts of coal and gas has been developed. Criteria of forecasting, an assessment of efficiency of the preventive measures are suggested, as well as the necessary technical facilities and technologies.
-
Date submitted2009-10-26
-
Date accepted2009-12-27
-
Date published2010-09-22
Support of geodynamic safety in mining of the Khibini deposits
The paper deals with the problems of geodynamics in mining of the Khibini deposits. Description is given to the complex of organizational-technical arrangements for provision of geodynamic safety at the Apatit Co and to principal trends of its development.
-
Date submitted2009-10-08
-
Date accepted2009-12-10
-
Date published2010-09-22
Control of dynamic rock pressure manifestations in mining the «Antey» deposit
The article considers the conditions and pattern of dynamic rock pressure manifestations in mining the «Antey» deposit of uranium ores. Data on geological, technological and geomechanical conditions of the deposit mining are given. The methods and means for rock pressure control are described as well as the results of their application at deep horizons of ore mine are given.
-
Date submitted2009-10-14
-
Date accepted2009-12-27
-
Date published2010-09-22
Modeling of geomechanical processes and their geophysical control in coal strata mining
- Authors:
- V. V. Zubkov
- I. A. Zubkova
The paper presents the results of combination of geomechanical and geophyisical monitoring. The stress state of the minable coal seams is calculated according to the program FAULT3D with account of mining operations plan, specific seam occurrence and geological disturbances. The analysis of seismic events in the geodynamically hazardous zone has been made.
-
Date submitted2009-10-02
-
Date accepted2009-12-03
-
Date published2010-09-22
Particular formation of higher rock pressure zones with intensive mining of contiguous seams at coal mines of the «Suek-Kuzbass» CO
- Authors:
- A. I. Paltsev
- V. V. Zubkov
- N. V. Krotov
The problem of mining the suites of contiguous coal seams is considered. The sequential manner of seams mining essentially has influence on change of rock and gas pressure. The results of calculation and construction of borders of zones of higher rock pressure are presented. The analysis of conditions of hazardous zones formation is given.
-
Date submitted2009-09-01
-
Date accepted2009-11-21
-
Date published2010-06-25
Mathematical simulation of emergency situations arising at storage and treatment of potential hazard chemical substances
- Authors:
- Yu. V. Sharikov
- I. N. Beloglazov
Possible reasons arising destroying of storage and apparatuses for potential hazard materials have been analyzed. Thermal explosion has been indicated as one of most impotent reasons of destroying chemical reactors and storages. Basic equations for describing of this phenomena have been evaluated for different type geometry and conditions of heat exchange on outside surface. Numerical procedures have been proposed and tested for solving and analyzing of evaluated equations with using special program package ThermEx. Processes of evaluation arising clouds of hazard substances have been considered. Basic mathematical equations have been proposed for analyze of considered processes. The procedure for solving of considered problems has been proposed and tested on base of special program package ReactOp.
-
Date submitted2009-07-21
-
Date accepted2009-09-27
-
Date published2010-04-22
Study of gas-and geodynamic state of technogenically changeable coal rock mass
- Authors:
- A. D. Ruban
Intensification and concentration of the mining works increases substantially the risk of geo- and gasdynamic effects arising within the coal mines. Herewith are presented the results of the analytic and experimental studies on stress-strain state of rock mass due to technogenic impact. Under such conditions a potential avalanche destruction of coal rock mass may occur. Some criteria for evaluation of gas-dynamic danger for rock mass, for active stopes and development faces are given. The computer-aided system for monitoring of hazard of gas- and geodynamic phenomena in mines is suggested.
-
Date submitted2009-07-12
-
Date accepted2009-09-16
-
Date published2010-04-22
Numerical assessment of stress-strain field in vicinity of large open pit mine taking into account geomechanical, geological and mining factors
The results of modeling of rock mass stress state in the vicinity of large open pit mine using finite-elements method are represented. The model allows to take into account the influence of large-scale fractures. The initiation of boundary conditions is based on the results of determination of stress parameters in situ. The locations of risk areas near the slope are defined.