-
Date submitted2023-10-04
-
Date accepted2024-09-24
-
Date published2025-02-25
Crustal movement model in the ITRF2020 – a case study in Northern Vietnam
- Authors:
- Bui Thi Hong Tham
- Phi Truong Thanh
In the North area of Vietnam, the crustal movement velocity of 38 GNSS points belonging to different international Earth reference frames (ITRF2000, ITRF2005, ITRF2008) is adjusted to the international Earth reference frame ITRF2020. This is the latest frame up to now. Since then, the picture of crustal movement in the North area of Vietnam has been unified in a dynamic coordinate system. In the study area, the rate of crustal movement is about 35 mm/year, and the direction of displacement is from northwest to southeast. To build a model of the crustal movement of the Earth in the northern area of Vietnam, the movement velocity data of 38 stations in ITRF2020 is evaluated with high accuracy. All points are also satisfactory. And then, the crustal movement velocity model is built by using the collocation method in the form of the 3-order Markov function. Within 38 stations, 34 stations are used to build the model and 4 remaining stations are used as checked stations. The obtained results show that the Earth's crust movement velocity model has an accuracy of about 2 mm/year for movement velocity and 2 deg for movement direction. This is the first model of Earth's crust movement in the North of Vietnam that has been built in the latest dynamic coordinate system ITRF2020. These results have important significance in the research and practical application of the movement of the Earth's crust. The steps of building the movement velocity model in this study can be applied to other experimental areas in the territory of Vietnam.
-
Date submitted2022-07-15
-
Date accepted2022-12-13
-
Date published2023-02-27
Mathematical modelling of displacement during the potash ores mining by longwall faces
In favourable mining conditions, in particular at the Starobinskoye potash deposit (Belarus), longwall mining systems are used. They cause a high human-induced load on the subsoil, including intense deformation of the ground surface. The presented investigations are aimed at studying the dynamics of the ground surface displacement during the longwall face advance. Mathematical modelling was carried out in an elastic-plastic formulation with numerical implementation by the finite element method. The condition for the roof rocks collapse was opening of the contact between the seams when its boundaries were reached by shear fractures or formation of the tensile stresses area at the outcrop. With the working front advance, an increase in subsidence is observed, followed by its stabilization to a value determined by the process parameters of mining operations and the physical and mechanical properties of collapsed rocks. In this case, each point of the ground surface experiences sign-alternating horizontal deformations: when the front approaches, it causes tension, and when it moves away, compression. The obtained results of mathematical modelling are in good agreement with the data of instrumental measurements of the ground surface displacements, which indicates the adequate description of the rock mass deformation during the slice excavation of sylvinite seams by longwall faces.
-
Date submitted2022-04-29
-
Date accepted2022-07-21
-
Date published2022-11-10
Deep structure, tectonics and geodynamics of the Sea of Okhotsk region and structures of its folded frame
The use of the zonal-block model of the earth's crust for the construction of regional tectonic schemes and sections of the earth's crust based on a complex of geological and geophysical data makes it possible to consider the resulting maps and sections as tectonic models. The main elements of such models are blocks with an ancient continental base and interblock zones formed by complexes of island arcs, an accretionary prism, or oceanic crust. The developed geotectonic model of the Sea of Okhotsk region reflects the features of the deep structure, tectonics, and geodynamics. The Cimmerian Novosibirsk-Chukotka, Verkhoyansk-Kolyma, Kolyma-Omolon, and Amur folded regions and the Alpides of the Koryak-Kamchatka and Sakhalin-Sikhote-Alin folded regions are developed along the northern, western, and southern boundaries of the Sea of Okhotsk megablock with a continental crust type. From the east, the megablock is limited by oceanic basins and island arcs.
-
Date submitted2021-03-18
-
Date accepted2021-11-30
-
Date published2021-12-27
Deformations assessment during subway escalator tunnels construction by the method of artificial freezing of soil for the stage of ice wall formation
- Authors:
- Evgenii M. Volokhov
- Diana Z. Mukminova
The work is devoted to the study of the processes of displacement and deformation of the surface during the escalator tunnels construction of the subway by the method of artificial freezing of soils. The features of the construction and freezing technology, the rocks characteristics in which the escalator tunnels made are considered. The data of specially organized, full-scale surveying observations of deformations on the earth surface are presented. The main factors influencing deformation processes in the frozen strata of a layered inhomogeneous rock mass with inclined tunneling are determined, the complexity of the predictive task and the need to simplify the design scheme are shown. The work is focused on the assessment of the least studied geomechanical processes of soil heaving-uplifts and deformations during the periods of active and passive freezing stages. When studying the displacements processes of the earth surface and rock mass, the finite element method and analysis of the obtained data using field observations of displacements were used. A simplified calculation scheme is proposed for modeling, which allows taking into account the uneven influence of frozen rocks of an inhomogeneous layered rock mass with a large inclined tunneling. The satisfactory convergence of the data of field surveying observations on the earth surface and the results of modeling geomechanical processes for the period of active and passive freezing stages is shown. The proposed calculation scheme is recommended for the prediction of deformation at the stages of underground construction, characterized by the development of the most dangerous tensile deformations of buildings and structures on the surface.
-
Date submitted2020-06-16
-
Date accepted2020-07-13
-
Date published2020-11-24
Study of Aluminum Influence on the Adhesion of Stainless Steel in Flame Spraying
This paper is dedicated to a study of aluminum influence on the improvement of surface adhesion strength. The main purpose of this work is to investigate the strength of adhesion to the substrate by mixing flame spray powder with aluminum, which not only possesses high corrosion resistance and conductivity, but also provides additional strength, as it combines and reacts with other components of the powder. Research results of sandblasting dependence on surface roughness parameter Ra are demonstrated. The paper describes authors’ original device for a measuring instrument “Profilometer”, which was also used for measuring roughness parameter in order to obtain comparative results. Authors present results of adhesion measurements given obtained values of surface roughness by mixing nominal chemical composition of PR-30X13 powder, used as a testing material, with aluminum, which reacts with oxides on the surface of steel substrates, imparts strength to the bonding between the coating and the substrate, protects the base metal due to a combination of chemical components of the powder and creates a layer of dense surface coating. These dependencies are analyzed and parameters, exerting the greatest influence on their values, are identified. Taking into account the results obtained through numerical modeling, authors propose a mathematical model of a dependency between adhesion strength and certain values of surface roughness for different chemical compositions of flame spray powder. These studies will help in the development of certain material types for spraying and hardening of steel parts and products in order to improve their durability.
-
Date submitted2018-09-10
-
Date accepted2018-11-06
-
Date published2019-02-22
Comparative analysis of zincand tin oxidation with acids at room temperatures
- Authors:
- S. D. Pozhidaeva
- L. S. Ageeva
- A. M. Ivanov
The paper analyses the parameters of deep oxidation of zinc and tin by copper (II) compounds and molecular iodine in the presence of molecular oxygen and hydrogen peroxide, as second oxidizers working synchronously with them in various media (aqueous, aqueous-organic and organic) with the participation of mineral and carboxylic acids close to room temperature. The contribution of the reactivity of the metal to its rate of consumption, especially the average, is often much less than the contribution associated with the release characteristics of the working surface, determined by the rates of accumulation of surface deposits of metal oxidation products, their strength and adhesion characteristics their destruction and shifting into the bulk phase.
-
Date submitted2018-05-09
-
Date accepted2018-06-30
-
Date published2018-10-24
Scientific and methodical approaches to increase prospecting efficiency of the russian arctic shelf state geological mapping
- Authors:
- A. S. Egorov
- I. Yu. Vinokurov
- A. N. Telegin
A rationale for the set of theoretical and methodological techniques of mapping and deep modeling in the Russian Arctic shelf and adjacent sedimentary basins in continental Russia is based on the materials for the Barents and Kara Seas region. This article provides the factual basis of the research and shows how to apply zonal-block model of the crust and generalized models of geodynamic settings in terms of the different geophysical data inconsistency. The necessity and approach for global and regional paleo-reconstructions are also discussed. It is shown that localization of the principal structural and compositional units of the lithosphere being a consequence of geodynamic processes at the boundaries of lithospheric plates, form at the basis of sedimentary cover and crystalline basement layered maps as well as cross-sections of the continental crust. The identified parameters of the deep structure and milestones of the regional tectonic history open new opportunities to explore the regularities of ore deposits distribution. The shown example of the forecast and metallogeny problems solution within Western Siberia and Khatanga-Vilyui petroleum provinces is made using the parameters of known industrial oil and gas fields for training the pattern recognition system.
-
Date submitted2017-09-11
-
Date accepted2017-10-30
-
Date published2018-02-22
Provision of adhesion strength of gas-thermal coatings on piston rings of quarry transport engines
- Authors:
- Yu. Olt
- V. V. Maksarov
- V. A. Krasnyi
The main trend in the development of modern diesel engine manufacturign is the creation of high-powered, reliable and economical internal combustion engines (ICE), which are widely used in various industries, including mining machinery. The application of the methods of gas-thermal and gas-plasma coating for obtaining wear-resistant layers on piston rings for large internal combustion engines of quarry transport – diesel locomotives and dump trucks- is considered. It is shown that the abrasive-jet machining of base coat is widely used as a preparatory operation before coating process, and the roughness of the working surface of the rings after abrasive-jet machining has a significant impact on the adhesion strength of the coating with the base material. The selection of the surface roughness and the conditions of abrasive-jet machining for increasing the coating adhesion strength to the base coat significantly determines both the thickness of the coating and the reliability of the part itself. The aim of the paper is to investigate the dependence of the adhesion strength of a gas-thermal wear-resistant coating of piston rings of large engines of quarry transport, including dump trucks and diesel locomotives, from the roughness of the working surface after abrasive-jet machining, which in turn depends on its modes (distance to the nozzle exit section, the number of passes, the working air pressure, the shot change rate). The working surface adhesion strength of piston rings with diameter of 210 mm coated with molybdenum and steel wire composition was investigated by the twisting angle at which the coating peeled. It is shown that the roughness providing a twist angle greater than 35° should be more than 22 μm, which does not cause coating peeling off. Modes of abrasive-jet machining providing the specified values of roughness: working air pressure is 0.4 MPa, distance to the nozzle exit section is 110 mm, the number of passes is 2, and the shot changes after processing 40 mandrels.
-
Date submitted2016-09-16
-
Date accepted2016-11-12
-
Date published2017-02-22
Possibilities of seismic exploration for crystalline basement study
- Authors:
- A. N. Telegin
Possibilities of seismic methods of reflected and refracted waves have been examined for the purposes of detailed study on crystalline basement structure. Investigation of depth and structure of the basement plays an important role in the exploration of various deposits. Sedimentary cover is usually associated with oil and gas reserves. Ore deposits are formed in the basement rocks, basement splits and structure of its surface have a genetic relation not only to ore minerals, but also to oil resources. Reflection seismology is one of the main seismic methods of investigating structural geometry of the sedimentation mass, forecasting its material composition and possible hydrocarbon reserves. However, its possibilities for investigating crystalline basement are limited. Basing on many years’ experience of reflection seismology and physical modeling it has been identified that actual roughness of basement surface limits the obtainable amount of waves reflected from it. Possibilities of reflection seismology for basement structure study are mostly related to investigation of discontinuous faults as diffraction objects using diffracted waves. Method of refracted waves combined with modern procedures and material processing aimed at getting dynamic seismic sections holds much significance for the basement study, especially in the process of surface mapping and, to a lesser extent, in investigating discontinuous faults.
-
Date submitted2015-10-07
-
Date accepted2015-12-01
-
Date published2016-08-22
Evaluating possible industrial applications of combustible shales and shale ash wastes
- Authors:
- N. K. Kondrasheva
- S. N. Saltykova
Today energy consumption is constantly growing while explored reserves of easily accessible oil are depleting, which is a reason why most countries tend to diversify their energy mix, develop non-hydrocarbon energy sources and use domestic types of fuel, including the low grade ones. Thereby interest is raised to such a source of hydrocarbons as combustible shales. Combustible shales appear to be one of the highest-potential types of organic raw materials, which may offset and in future even substitute oil products and gas. The paper is investigating behavior and structure of combustible shales during heat treatment in order to identify their possible industrial applications. A synchronous thermal analysis has been held, chemical composition of combustible shales’ mineral fraction and optimal conditions for shale fines briquetting have been determined.
-
Date submitted2014-12-25
-
Date accepted2015-02-01
-
Date published2015-12-25
Deep structure and composition characteristics of the continental earth's crust geostructures on the Russian Federation territory
- Authors:
- A. S. Egorov
Principal features of deep structure and composition of the lithosphere geostructures of the continental part of the Russian Federation territory are characterized within the radial-zonal model of the Earth’s crust. The principal units of the model are megablocks (paleoplites) with ancient layered continental crust and interblock megazones (structures of tension, compression and shear), separating them. The results of the geological-geophysical modeling are presented in the form of layer by layer deep structure schemes – of consolidated basement and of the platform cover and accompanied by a set of the earth's crust sections, carried out along regional profiles, performed with the application of a deep seismic sounding (DSS) method and reflected waves of common depth point (CDP) method.
-
Date submitted2014-12-20
-
Date accepted2015-02-05
-
Date published2015-12-25
Synergetic changes of tribochemical properties in the heterogeneous systems containing surface modified metals
- Authors:
- A. G. Syrkov
In the article tribochemical properties and synergetic effects in lubricants with metal addi-tives, characterized by surface modifcations, have been analysed. The priority results of measur-ings friction coefficient (f) and friction force (F fr) are given for heterogeneous systems in the form of И-20 oil with solid Al-additives, contatiing dispersed aluminium, with surface-modified triamon (Т), alkamon (A) and ethylhydridsiloxane according to various programs. It has been educed that with all other things being equal, triamon underlayers introduction into Al-additives with the external chemisorpted ethylhydridsiloxane layer results in the decrease of F fr and f in the system in proportion to the Т-underlayer number reduction from three to one. It has been discovered that the use of low-molecular Т-underlayer in Al-additives is a delicate method of summand value regulation (from 10,8 to 13,2 Н), accountable for intermolecular forces in the boundary fritction equation in the tribological pair applied.
-
Date submitted2010-07-15
-
Date accepted2010-09-26
-
Date published2011-03-21
Development of the stowing material and testing of its mechanical properties
- Authors:
- M. N. Andreev
- E. I. Boguslavskiy
Article is in touch with analysis of backfill materials applied on diamond mines, description of research of its mechanical properties to create the optimal compound in conditions of Yakutian kimberlitic tubes.
-
Date submitted2010-07-21
-
Date accepted2010-09-08
-
Date published2011-03-21
Calculation methodology of physical parameters of the artificial pillar barrier
- Authors:
- M. N. Adreev
The article is devoted to the calculation methodology of physical parameters of the artificial barrier pillar needed when developing underquarry deposits of kimberlitic pipes in difficult hydrogeological conditions.
-
Date submitted2009-10-20
-
Date accepted2009-12-11
-
Date published2010-09-22
Monitoring of deformation processes of the earth surface with methods of differential interferometric treatment of radar data
- Authors:
- A. A. Krivenko
- Yu. A. Kashnikov
The Differential Interferometry SAR (DInSAR) has recently become one of the most popular methods to reveal and analyze the subsidence of the ground. This method is considered by researchers to be well suited to solve a problem of small relative ground shifts survey applying the short (centimeter) radio waves.
-
Date submitted2009-10-13
-
Date accepted2009-12-14
-
Date published2010-09-22
The evaluation of geodynamic consequences оf long-term exploration of lower cretaceous sediments at the Yamburg oil-gas condensate field with join of additional wells
Within the framework of the engineering design of the join up of additional wells of Lower Cretaceous sediments at the Yamburg oil-gas condensate field the evaluation of geodynamic consequences of long-term exploitation of the mentioned field was performed, as well as the hazardous geodynamic process permanent survey program was developed.
-
Date submitted2009-10-10
-
Date accepted2009-12-02
-
Date published2010-09-22
Deformational precursors of technogenic earthquakes in mining the hydrocarbon deposits
During monitoring since 2005 to 2008 at the Astrakhan gas-field it has been recorded three technogenic earthquakes. Results of geodetic levelling for the given period allow to approve that seismic event is preceded by raisings of a surface and its subsequent subsidence as a its result of unloading. That allows to use geodetic levelling for the forecast of technogenic seismic phenomena for oil and gas fields.
-
Date submitted2009-10-29
-
Date accepted2009-12-26
-
Date published2010-09-22
Control system of rock pressure at the «Antey» deposit
- Authors:
- B. A. Prosekin
- E. A. Ilin
The paper deals with the geomechanical monitoring system of the Antey deposits of uranium ores. Characteristics of the methods and means for rock pressure control are given.
-
Date submitted2009-10-01
-
Date accepted2009-12-02
-
Date published2010-09-22
Specific manifestations of tectonic and seismic activity in Kuzbass
- Authors:
- A. I. Ekimov
- S. V. Tsirel
The conducted observations demonstrated the substantial growth and variation of nature of tectonic and seismic activity in Kuzbas. Growth of geodynamic risks is marked. Methods for study of observable processes are suggested.
-
Date submitted2009-07-17
-
Date accepted2009-09-06
-
Date published2010-04-22
Hydrogeomechanical processes in flooding of mines
- Authors:
- Yu. A. Norvatov
- I. B. Petrova
Hydrodynamic and hydrogeomechanical processes which may occur during flooding of coal mines are considered. Original scheme – model of strain state of waterbearing undermined massif for estimation of uplift of earth surface was suggested.