Submit an Article
Become a reviewer
JOURNAL IMPACT FACTOR
2.4
WEB OF SCIENCE (ESCI)
citescore
7.5
scopus

Vol 178

Previous
Vol 177
Mechanization and electrification of mining and oil & gas industries
  • Date submitted
    2007-11-25
  • Date accepted
    2008-01-04
  • Date published
    2008-05-01

Modern methods of controlling the work of powerful excavator-automobile complexes at quarries

Article preview

In this article the description of modern dispatch systems for mining-and-transport complexes at open pit mining developed by most popular Russian and foreign companies is given. The sequence of their application at plants and its efficiency are shown. The results of market capacity researches of such systems for the period to 2015 year and trends of their development are given.

How to cite: Kuleshov A.A. Modern methods of controlling the work of powerful excavator-automobile complexes at quarries // Journal of Mining Institute. 2008. Vol. 178. p. 7-16.
Mechanization and electrification of mining and oil & gas industries
  • Date submitted
    2007-11-20
  • Date accepted
    2008-01-19
  • Date published
    2008-05-01

System of monitoring and estimation of residual resource of power electrical equipment

Article preview

The review of existing methods of technical diagnostics of an industrial electric equipment is submitted, expressions for definition of the basic diagnostic parameters are resulted at diagnostics of a condition of the equipment on electric parameters.

How to cite: Zhukovsky Y.L., Kozyaruk A.E., Korzhev A.A., Krivenko A.V. System of monitoring and estimation of residual resource of power electrical equipment // Journal of Mining Institute. 2008. Vol. 178. p. 17-21.
Mechanization and electrification of mining and oil & gas industries
  • Date submitted
    2007-11-22
  • Date accepted
    2008-01-23
  • Date published
    2008-05-01

Automatic centralized lubrication systems. Experience of application, problems and prospects of use

Article preview

Presented the practical useful of central oiling systems (COS) for equipment mining and building industry and determined the field using of these systems. Presented the experimental results of flooding different oil for COS bellow zero.

How to cite: Ivanov S.L., Dudko P.P., Dmitriev G.Y., Podkhalyuzin S.P. Automatic centralized lubrication systems. Experience of application, problems and prospects of use // Journal of Mining Institute. 2008. Vol. 178. p. 22-26.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-22
  • Date accepted
    2008-01-30
  • Date published
    2008-05-01

Calculation of parameters of pipe-water transportation of hydraulic mixtures with high concentrations of solid phase

Article preview

In this paper the results theoretical estimation of value yield shear stress at the hydraulic transportation of poly-metallic ore tailings are presented. In basis of a method separate positions of the similarity theory are used thus in consideration the combination of numbers of Reynolds, Froud and Euler which set have led to the new dimensionless criterion describing the yield shear stress is accepted.

How to cite: Aleksandrov V.I., Pirozhenko V.P., Gurkin P.B. Calculation of parameters of pipe-water transportation of hydraulic mixtures with high concentrations of solid phase // Journal of Mining Institute. 2008. Vol. 178. p. 27-30.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-13
  • Date accepted
    2008-01-18
  • Date published
    2008-05-01

Calculation of loads on walls of cylindro-conical hoppers.

Article preview

For calculations of designs accumulating, running (dampering) bunkers design procedures of the elementary forms the vertical cylinder or even slot-hole capacity with vertical parallel walls are used and processes of movement of a material are not considered in any way at release. The method of calculation for the combined form of the bunker in view of physicomechanical properties of a material of loading and walls of the bunker (a corner of a natural slope, bulk weight, factors of friction between particles of a material and particles about walls of the bunker is offered at rest and movement of a material) on the basis of use of model of the discrete environment in the form of regular stacking spheres.

How to cite: Batalov A.P., Kremcheev E.A. Calculation of loads on walls of cylindro-conical hoppers. // Journal of Mining Institute. 2008. Vol. 178. p. 31-34.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-27
  • Date accepted
    2008-01-28
  • Date published
    2008-05-01

Belt conveyor with a suspended belt on sliding supports

Article preview

The paper presents and analyzes the construction of the movable-belt conveyor on sliding supports developed at the Mining Transport Machine Department, the Saint Petersburg State Mining Institute. Its advantages over the existing analogues including conveyors with magneticcushion supports are substantiated.

How to cite: Vasiliev K.A., Nikolaev A.K. Belt conveyor with a suspended belt on sliding supports // Journal of Mining Institute. 2008. Vol. 178. p. 35-39.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-07
  • Date accepted
    2008-01-28
  • Date published
    2008-05-01

Results of analytical research of crushers with complex jaw motion

Article preview

In this article, the results of the kinematics and dynamics analysis of a single-toggle jaw crusher mechanism are represented. Connection between operation mode parameters of the crusher and its technical characteristics is shown. Such parameters as position of the toggle plate, pin angle of the crusher, rotation speed and the eccentricity of the main shaft are described.

How to cite: Golikov N.S., Timofeev I.P. Results of analytical research of crushers with complex jaw motion // Journal of Mining Institute. 2008. Vol. 178. p. 40-42.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-14
  • Date accepted
    2008-01-24
  • Date published
    2008-05-01

Determination of safety degree of underwater crossings of gas-pipelines in difficult engineering-geological conditions

Article preview

Reliability and safety are the most important requirements for pipeline transport. The underwater pipelines exploitation analysis based on the last 10 years data shows that the reasons of refusals normally are different force factors, to which concern internal pressure of gas, inadmissible bend on roughnesses of a water bottom relief, random dynamical influences of boat anchors, resonant fluctuations under influence of a stream during washouts of a bottom, erosive process at the bottom and coasts etc.

How to cite: Dzardanov O.I. Determination of safety degree of underwater crossings of gas-pipelines in difficult engineering-geological conditions // Journal of Mining Institute. 2008. Vol. 178. p. 43-46.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-18
  • Date accepted
    2008-01-05
  • Date published
    2008-05-01

Determination of operation modes of step mine drainage systems without intermediate water collectors

Article preview

For determination state of working ступенчатых mining водоотливных of the installation without intermediate водосборников follows to define the режимные parameters last step and use their as input at calculation previous step. For ensuring given state of working whole installation necessary to change the features a pipe line or pump.

How to cite: Kabanov O.V., Zadkov D.A., Kabanov S.O. Determination of operation modes of step mine drainage systems without intermediate water collectors // Journal of Mining Institute. 2008. Vol. 178. p. 47-50.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-18
  • Date accepted
    2008-01-14
  • Date published
    2008-05-01

Justification of the optimal mode of operation of the mine pumping unit at the design stage

Article preview

It is possible to consider as an optimum behavior of operation a mode providing the least daily allowance or annual charges of the electric power. Such mode can be received by increase in efficiency up to maximal and reduction of losses of a pressure in pipelines. On design stage the optimum behaviour can be achieved with the help of an offered design procedure of modes of operation of miner pump installation.

How to cite: Kabanov O.V., Solov’ev V.S., Kabanov S.O. Justification of the optimal mode of operation of the mine pumping unit at the design stage // Journal of Mining Institute. 2008. Vol. 178. p. 51-54.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-05
  • Date accepted
    2008-01-25
  • Date published
    2008-05-01

Justification of rational technical parameters of low-toxic diesel engine for underground mining transportation equipment

Article preview

In work the analysis of the operational factors influencing toxicity of fulfilled gases of diesel engines is presented. Actions on reduction in toxicity are certain. The difference between concentration СО on the unsteady and established modes which strongly depends on a high-speed mode. The generalized dependences of concentration of toxic components on a high-speed operating mode of domestic transport diesel engines without pressurization and with pressurization are presented. Specific emissions of toxic components of domestic diesel engines from a loading operating mode are presented too. It is drawn a conclusion on necessity of application of devices and the control systems providing reduction of duration of transients.

How to cite: Kuleshov A.A., Strebkov K.A. Justification of rational technical parameters of low-toxic diesel engine for underground mining transportation equipment // Journal of Mining Institute. 2008. Vol. 178. p. 55-58.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-30
  • Date accepted
    2008-01-21
  • Date published
    2008-05-01

Justification of parameters of the hydraulic turbine for the drive mechanisms at deep-water mining of solid minerals

Article preview

In article was considered following parameters: influence of input and output angles of stator and rotor on hydraulic efficiency coefficient, calculating sequence and construction of setting, mechanical characteristics of direct-flow multi-step hydro-turbine for driving of submarine machines and mechanisms.

How to cite: Makhovikov B.S., Ekimov N.A. Justification of parameters of the hydraulic turbine for the drive mechanisms at deep-water mining of solid minerals // Journal of Mining Institute. 2008. Vol. 178. p. 59-63.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-13
  • Date accepted
    2008-01-01
  • Date published
    2008-05-01

Hydraulic coarseness of coal particles

Article preview

Having accounted coal particles after fragmentation on different equipment, particles in the form of needles, cubes, plates, blocks and pyramids were distinguished. After the analysis of the research to define the speed hindered falling of particles of different forms in water (hydraulic fineness) there have been proposed dependencies considering the density of the heterogeneous carrier phase, effective viscosity of water containing coal mud in different quantity, equivalent diameter for different forms of coal particles and the seeming density of dry coal at a specific ash content and average humidity.

How to cite: Nezametdinov A.B. Hydraulic coarseness of coal particles // Journal of Mining Institute. 2008. Vol. 178. p. 64-68.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-07
  • Date accepted
    2008-01-30
  • Date published
    2008-05-01

Determination of quantity of coal grains by equations of total characteristic of coarseness

Article preview

Volume shares taken by every phase of the heterogeneous mixture for coal particles in the shape of cubes, plates, needles, bricks and pyramids allow defining true density of mark D bank coal. Using the fineness all-up, taking into account the ash content and the forms of the extruded coal particles, we obtained the volume for heterogeneous water-coal suspension 16 % less than the cubic grains volume, calculated by the old method.

How to cite: Nezametdinov A.B. Determination of quantity of coal grains by equations of total characteristic of coarseness // Journal of Mining Institute. 2008. Vol. 178. p. 69-72.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-23
  • Date accepted
    2008-01-25
  • Date published
    2008-05-01

Rheological model of the flow of a high-concentration hydro-mixture

Article preview

The experimental research is made in the laboratory of hydrotransport. It includes determination of rheological properties of copper-zinc ore’s high-concentrated hydromixtures. As a result there is a mathematical description of its flow in the pressure head pipeline.

How to cite: Nikolaev A.K., Avksentiev S.Y. Rheological model of the flow of a high-concentration hydro-mixture // Journal of Mining Institute. 2008. Vol. 178. p. 73-76.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-06
  • Date accepted
    2008-01-07
  • Date published
    2008-05-01

Development of composition of component composition of deposit mixture on the basis of enrichment tailings

Article preview

In paper the theoretical and experimental research results on selection of volume composition of backfilling mixture making from Dzhezkazgan copper ore tailings are presented. The obtained backfilling mixture not only provides the normative strength characteristics but also characterized by stability of rheological properties, good portability and moreover by uniformity of internal structure at relative low contents of cement M400.

How to cite: Pirozhenko V.P. Development of composition of component composition of deposit mixture on the basis of enrichment tailings // Journal of Mining Institute. 2008. Vol. 178. p. 77-81.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-19
  • Date accepted
    2008-01-17
  • Date published
    2008-05-01

Analysis of calculation methods of technogenic risk at operation of main gas pipelines

Article preview

Analysis methods of estimation industrial risk by operation gas-main pipeline is diacribed in thia article. Fundamental ideas and principal as well dignitys and drawbacks of existing methods of estimation industrial risk is describe.

How to cite: Podavalov I.Y. Analysis of calculation methods of technogenic risk at operation of main gas pipelines // Journal of Mining Institute. 2008. Vol. 178. p. 82-85.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-18
  • Date accepted
    2008-01-05
  • Date published
    2008-05-01

Estimation of lubricating ability of oils of transmissions of mining machines

Article preview

Lubricating value shows loading capacity of transmission oil. Poor lubricating value of friction couples which are used at borderline lubrication ordinary have wear-out areas and these friction couples also fiercely attacked by corrosion. That’s why a decision of choosing oil type have to be substantiated. In this article rapid method of lubricating capacity tests is offered.

How to cite: Poddubnaya A.A., Fokin A.S., Ivanov S.L., Kremcheev E.A., Potapenko V.S. Estimation of lubricating ability of oils of transmissions of mining machines // Journal of Mining Institute. 2008. Vol. 178. p. 86-90.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-01
  • Date accepted
    2008-01-04
  • Date published
    2008-05-01

Lever-type traction mechanisms with pressure of driving wheels regulated in function of resistance to motion

Article preview

The paper deals with the problem of stabilization of traction wheels engagement with the traction rail in a lever-type mechanisms. The stabilization systems used in suggested designs of traction devices make available to obtain the constancy of the transfer ration of the lever system, which is independent of both drive wheels and traction rail wear. Thus, the constancy of the engagement coefficient is possible to obtain without usage of any additional regulating device.

How to cite: Sokolova G.V., Denegin V.V. Lever-type traction mechanisms with pressure of driving wheels regulated in function of resistance to motion // Journal of Mining Institute. 2008. Vol. 178. p. 91-94.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-12
  • Date accepted
    2008-01-06
  • Date published
    2008-05-01

Prospects of improvement of technical means for catching belts of inclined and bremsberg conveyors

Article preview

Actuality of improving belt capture systems of inclined conveyors is showed, the classification of this systems and schemes of the most indicative types are safety gear.

How to cite: Tarasov Y.D., Fedorov F.V. Prospects of improvement of technical means for catching belts of inclined and bremsberg conveyors // Journal of Mining Institute. 2008. Vol. 178. p. 95-101.
Technological machinery and equipment of mining and oil & gas industries
  • Date submitted
    2007-11-26
  • Date accepted
    2008-01-17
  • Date published
    2008-05-01

Design and calculation methodology of double-circuit vertical belt conveyor for mining industry

Article preview

The construction and operating of two-circuit vertical belt conveyor are present, experimental laboratory model, the method of experimental research and tractional calculation specifics are shown.

How to cite: Tarasov Y.D. Design and calculation methodology of double-circuit vertical belt conveyor for mining industry // Journal of Mining Institute. 2008. Vol. 178. p. 102-109.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-02
  • Date accepted
    2008-01-04
  • Date published
    2008-05-01

Complex system of quality control of electric energy at the enterprises on mining and processing of minerals

Article preview

Power quality level (PQ) is an important factor for providing of continuity and efficiency for technological process extraction, processing, and transportation of mineral resources. The electrical power cost decreasing method by means of actual power quality factors (PQF) putting in accordance with GOST 13109-97 norms has been proved. The PQF continuous complex monitoring system structure and its basic designing principles, which allows to make commercial, technical and technological PQ control, have been offered and economically sounded.

How to cite: Abramovich B.N. Complex system of quality control of electric energy at the enterprises on mining and processing of minerals // Journal of Mining Institute. 2008. Vol. 178. p. 110-115.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-20
  • Date accepted
    2008-01-30
  • Date published
    2008-05-01

Dynamic and energy indices of control systems of asynchronous drive of mining equipment

Article preview

One of the trend lines while perfection of the electromechanical and electro-technologies for the mining, oil and gas extraction industries is the development and utilization of the efficient frequency drive control systems consisting of the asynchron electrical machines. The models of drives with vector and scalar control are given for the comparable investigation of efficiency dynamic and of the asynchrony machine's power factor under frequency-regulation. The results of the transient modelling for the drives with 4A280S6 motors are presented, obtained using MatLab.

How to cite: Alekseev V.V., Yazev V.N. Dynamic and energy indices of control systems of asynchronous drive of mining equipment // Journal of Mining Institute. 2008. Vol. 178. p. 116-119.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-07
  • Date accepted
    2008-01-18
  • Date published
    2008-05-01

Long-range redundancy of protection failures in 0,4 kV networks at gas transportation enterprises

Article preview

The electrical networks of voltage 0,4 kilovolt are the most widespread ones, they are used at all industrial and agricultural enterprises, power stations and substations. Fail-safe operation of enterprises depends to a large extent on these networks. A problem of remote reservation of failures of guards and cutout switches has always been very acute in the networks of 0,4 kilovolt. Due to a very substantial reduction of values of short-circuit currents as the distance between a point of fault and power supplies increases, it was not possible to carry out this reservation by the same traditional methods as in high-voltage power networks. This problem has been found possible to be solved only in recent years when digital technology began to be used for protection of electrical networks.

How to cite: Belenko A.V., Petrov S.P. Long-range redundancy of protection failures in 0,4 kV networks at gas transportation enterprises // Journal of Mining Institute. 2008. Vol. 178. p. 120-122.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-02
  • Date accepted
    2008-01-28
  • Date published
    2008-05-01

Increase of accuracy of humidity measurement of bulk materials by dynamic thermovacuum method

Article preview

With the aim of increasing the accuracy of humidity measurement in bulk materials with application of the dynamic thermal vacuum method within the range above 20 % it was suggested to use temperature curve parameters of the vacuumized sample which characterize moisture freezing in the material. The paper offers analytical dependences describing correlations between the volume of water in the vacuumized sample before crystallization begins and parameters of the temperature curve and initial moisture content in the material as well as experimental research results that prove the adequacy of the model offered.

How to cite: Bolshunova O.M., Semenov M.A. Increase of accuracy of humidity measurement of bulk materials by dynamic thermovacuum method // Journal of Mining Institute. 2008. Vol. 178. p. 123-125.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-18
  • Date accepted
    2008-01-24
  • Date published
    2008-05-01

Relevance of application of centralized protection with inverse dependent time-current characteristic of RXIDG type for networks with resistive neutral groundi

Article preview

It is necessary to use considerably highomed resisters because of there are requirements to restrict over voltage by voltage 6-35 kilovolts with the resistive ground neutral to the same meaning in the networks. It makes usage of traditional protection from ground short circuit based on a current curve principle is inefficacious. Special characteristics of current curve the type RXIDG realized on digital relay are offered to use for these purposes. For these protections valuation of sensibility was done and the fields of using for opposite dependence characteristics in dependence on dimensions of networks was viewed. There is necessity for these devices of protections nonlinear characteristic of current curve under perfect tooling for protection of the networks 6-35 kilovolts considerably highomed ground neutral ground short circuit in the article.

How to cite: Bychin M.A. Relevance of application of centralized protection with inverse dependent time-current characteristic of RXIDG type for networks with resistive neutral groundi // Journal of Mining Institute. 2008. Vol. 178. p. 126-129.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-23
  • Date accepted
    2008-01-08
  • Date published
    2008-05-01

Dielcometric meter of humidity of bulk media

Article preview

A method is offered and the device bringing into effect this method which excludes the impact of electrode wear and inter-electrode space on metrological parameters of moisture indicators is presented. It is shown that by use of the known capacitance sensors with the help of the proposed algorithm of transformation it is possible to switch from the capacitance meters of dispersion material composition to pure dielcometric meters. In this situation metrological parameters do not depend on part specifications of their sensors. In addition the impact of all non-diagnostic markers is excluded in this device.

How to cite: Galushkin S.S. Dielcometric meter of humidity of bulk media // Journal of Mining Institute. 2008. Vol. 178. p. 130-134.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-02
  • Date accepted
    2008-01-28
  • Date published
    2008-05-01

Automatic sectionalization in electrical networks with voltage 6-10 kV

Article preview

Problems of increase reliability electro-supply distributive networks of an average voltage at the mountain enterprises are considered. It is shown, that introduction decentralized with application of automatic points of sectioning considerably reduces systems consumption the electric power. Algorithms decentralized managements of emergency operation work of a network are resulted.

How to cite: Zhukovskiy Y.L., Muratbakeev E.K. Automatic sectionalization in electrical networks with voltage 6-10 kV // Journal of Mining Institute. 2008. Vol. 178. p. 135-138.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-30
  • Date accepted
    2008-01-24
  • Date published
    2008-05-01

Method of integrity control of pipeline hydraulic transportation systems

Article preview

The control technique of pipeline hydrotransport systems integrity and definitions of place is developed on the basis of a acoustic signal spectrum analysis in the pipeline.

How to cite: Proskuryakov R.M., Malarev V.I., Knyshov N.V. Method of integrity control of pipeline hydraulic transportation systems // Journal of Mining Institute. 2008. Vol. 178. p. 139-142.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-24
  • Date accepted
    2008-01-05
  • Date published
    2008-05-01

Control of loading of dump trucks

Article preview

The paper presents a new automatic monitoring method of open-pit dump truck loading based on utilization of vehicle-mounted integrated systems characterized with improved accuracy up to 2,5-3 % of the truck nominal capacity.

How to cite: Semenov M.A., Bolshunova O.M. Control of loading of dump trucks // Journal of Mining Institute. 2008. Vol. 178. p. 143-145.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-28
  • Date accepted
    2008-01-14
  • Date published
    2008-05-01

Influence of engine damping properties on dynamics of mechanical part of combine harvester

Article preview

In article influence of smoothing of loading on a drive of a combine by increase in sliding of the asynchronous engine at dynamic properties of transmission is shown. The increase dempherated reduces factor of electromechanical communication, however this reduction slightly and does not lead to appreciable increase in dynamic forces in transmission.

How to cite: Solov’ev A.S., Grinberg Y.P., Solov’ev V.S. Influence of engine damping properties on dynamics of mechanical part of combine harvester // Journal of Mining Institute. 2008. Vol. 178. p. 146-149.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-10
  • Date accepted
    2008-01-25
  • Date published
    2008-05-01

Mobile complex for cleaning bottomhole zones of wells

Article preview

In article the mobile complex intended for clearing bottom of zones oil, gas and water-supply wells from sand and other adjournment, and also for opening productive layers with full selection of a core and for a capture of ground tests of lakes, the rivers, the seas and oceans, drilling of glaciers is investigated.

How to cite: Solov’ev V.A., Zagrivnyi E.A. Mobile complex for cleaning bottomhole zones of wells // Journal of Mining Institute. 2008. Vol. 178. p. 150-153.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-23
  • Date accepted
    2008-01-23
  • Date published
    2008-05-01

Microprocessor excitation systems of electromechanical complexes with synchronous motors

Article preview

Perfection of systems of excitation is defined both actualization of known requirements, and occurrence new. We shall note the following: increase of the entrance moment, increase in dynamic stability, decrease in losses, maintenance of requirements on quality of the electric power networks of feed, group management and regulation, a mode of operation with a minimum level of service. Performance of these requirements with a necessary level of efficiency is provided with application of the power keys operated by a voltage (IGBT, IGСТ) and microcontrollers. New electronics allows to maintain the equipment with a minimum level of service, but generates a new problem of replacement of accessories at long operation. For example, alternation of generations of microcontrollers demands drawing up and debugging of the new program.

How to cite: Ustinov D.A. Microprocessor excitation systems of electromechanical complexes with synchronous motors // Journal of Mining Institute. 2008. Vol. 178. p. 154-158.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-26
  • Date accepted
    2008-01-10
  • Date published
    2008-05-01

Pilot diagnostics of mining machines transmissions state by parameters of electric drive supply

Article preview

For diagnosing transmission of the mountain machine without installation of expensive gauges pilot diagnostics on parameters of a feed of the electric motor, based on the assumption can be used, that the majority of the indignations arising in transmission and influencing at the moment of resistance, overcome by the engine, affects change of instant power consumed by the electric motor.

How to cite: Poddubnaya A.A., Fokin A.S., Ivanov S.L., Ivanov A.S., Semenov M.A. Pilot diagnostics of mining machines transmissions state by parameters of electric drive supply // Journal of Mining Institute. 2008. Vol. 178. p. 159-161.
Electric drive, power supply, automation and control of mining and oil and gas production
  • Date submitted
    2007-11-02
  • Date accepted
    2008-01-12
  • Date published
    2008-05-01

Reduction of influence of higher harmonics on work of electrical complex of mining enterprise

Article preview

This work contains one of methods reduction high harmonics in electric networks of the industrial enterprises. Considering the maintenance of inductive and capasitor elements in a network the offered way is based on changing peak-frequency characteristic of network unit. Such changing is possible connecting additional reactors which parameters are defined by deciding various problems. The offered way is more economic in comparison with filter-compensating devices.

How to cite: Shklyarskiy Y.E., Sitnikov D.A., Skam’in A.N. Reduction of influence of higher harmonics on work of electrical complex of mining enterprise // Journal of Mining Institute. 2008. Vol. 178. p. 162-165.
Diagnostics and control of technical systems and their elements. New technologie
  • Date submitted
    2007-11-20
  • Date accepted
    2008-01-26
  • Date published
    2008-05-01

Mathematical modeling of system of technical service of mining-transport equipme

Article preview

In article main principles of modelling of technical service system to a method of imitation of processes of refusals and restoration serviceability of the fixed park of mining transport equipment are stated on the basis of parameters of reliability. The structure of modelling of the basic processes is shown and estimations are given to the generated algorithms and blocks.

How to cite: Belikov A.A. Mathematical modeling of system of technical service of mining-transport equipme // Journal of Mining Institute. 2008. Vol. 178. p. 166-169.
Diagnostics and control of technical systems and their elements. New technologie
  • Date submitted
    2007-11-04
  • Date accepted
    2008-01-06
  • Date published
    2008-05-01

Improvement of heat treatment regimes of cutters of road-headers for increase of their wear resistance

Article preview

The method is offered which allows to increase the wear resistance of bit bodies for continuous miners by means of their additional full hardening. This results in increasing the bit body hardness from 37-42 HRC up to 49-51 HRC, which must bring to increasing in wear resistance approximately of 25 %. The suggestion has been tested with a batch of bits spec. RKS-2 (РКС-2) in the mines of Vorkuta and have demonstrated an increasing in wear resistance compared with that of the bits which had not been exposed to an additional hardening.

How to cite: Bolobov V.I., Gabov V.V., Zadkov D.A., Tetervak A.V. Improvement of heat treatment regimes of cutters of road-headers for increase of their wear resistance // Journal of Mining Institute. 2008. Vol. 178. p. 170-172.
Diagnostics and control of technical systems and their elements. New technologie
  • Date submitted
    2007-11-20
  • Date accepted
    2008-01-09
  • Date published
    2008-05-01

Application of X-ray fluorescence spectroscopy method for determination of steel grade of rock-destroying tools

Article preview

It is shown that X-ray fluorescence method can be utilized to determine composition of steels used for manufacturing the rockbreaking tools. A conclusion is derived that one of the possible cause of low wear resistance of miner bits in «Vorkutaugol» is their bodies manufacturing from the steels, which do not meet the Mining Code specifications.

How to cite: Bolobov V.I., Gabov V.V., Gembitskaya I.M., Ponurova I.K., Aleksandrov M.A. Application of X-ray fluorescence spectroscopy method for determination of steel grade of rock-destroying tools // Journal of Mining Institute. 2008. Vol. 178. p. 173-174.
Diagnostics and control of technical systems and their elements. New technologie
  • Date submitted
    2007-11-29
  • Date accepted
    2008-01-28
  • Date published
    2008-05-01

Bench studies of a manual perforator with a piston-bowl impact system

Article preview

In clause the stand for research of shock systems is presented. The technique of experimental researches of the stand is stated and results of researches are presented. The necessary equipment for researches is presented. Efficiency of application in designs pnevmo- and hydropunchers of the dual shock system is proved. The further researches of shock system «piston-beat-bar» are stated.

How to cite: Burak A.Y., Jungmeister D.A., Vasiliev A.Y., Sudienkov Y.V. Bench studies of a manual perforator with a piston-bowl impact system // Journal of Mining Institute. 2008. Vol. 178. p. 175-180.
Diagnostics and control of technical systems and their elements. New technologie
  • Date submitted
    2007-11-22
  • Date accepted
    2008-01-24
  • Date published
    2008-05-01

Elimination of complications and accidents during deep well drilling in glaciers

Article preview

In spite of the certain success in ice drilling technology, there are enough accident examples of the deep coring in so-called warm ice, which is characterized by the increasing of ice crystals and has temperatures closed to the pressure melting point. The generally accepted recommendations for choosing of rational drilling parameters in such ice don’t exist. The low reliability of the drilling process as often as not resulted to the one of the most severe accident in the hole – sticking of the core drills. The effective accident elimination is possible due to the ice dissolving in the sticking zone by the delivery in this zone of the solvent active to ice, for example, ethylene glycol or its aqueous solution.

How to cite: Vasiliev N.I., Talalay P.G., Zubkov V.M., Krasilev A.V., Zubkov M.V. Elimination of complications and accidents during deep well drilling in glaciers // Journal of Mining Institute. 2008. Vol. 178. p. 181-187.
Diagnostics and control of technical systems and their elements. New technologie
  • Date submitted
    2007-11-24
  • Date accepted
    2008-01-05
  • Date published
    2008-05-01

Well damper

Article preview

It is necessary to decrease the vibration of bits to increase the productivity of drilling. This hole damper decrease the vibration when we use the foam liquids.

How to cite: Muraev Y.D., Kuzmin M.I. Well damper // Journal of Mining Institute. 2008. Vol. 178. p. 188-190.
Diagnostics and control of technical systems and their elements. New technologie
  • Date submitted
    2007-11-24
  • Date accepted
    2008-01-13
  • Date published
    2008-05-01

The area of existence of involute gear mesh with a given overlap coefficient

Article preview

It is shown, that application of the combined displacement while designing toothed gearings considerably allows to expand area of existence of gearing with a non-standard radial backlash. Influence of parameters of the tool on area of existence of gearing is submitted, the technology of realization of tangential displacement by generation of gears is described.

How to cite: Fokin A.S., Poddubnaya A.A., Ivanov S.L., Kremcheev E.A. The area of existence of involute gear mesh with a given overlap coefficient // Journal of Mining Institute. 2008. Vol. 178. p. 191-194.
Diagnostics and control of technical systems and their elements. New technologie
  • Date submitted
    2007-11-15
  • Date accepted
    2008-01-18
  • Date published
    2008-05-01

Separation of drilled cylindrical billet from rock massif

Article preview

The cylindrical stone blocks of large diameters (300-800 mm) are used as shafts of papermaking machines, which set up exclusive standards to fissuring of stone. The present paper describes a special device for separation of cylindrical stone blocks from the bottom without destruction of the surrounding rock mass shutting out appearance of fissuring in the stone.

How to cite: Eist Y.A., Talalay P.G. Separation of drilled cylindrical billet from rock massif // Journal of Mining Institute. 2008. Vol. 178. p. 195-197.
Diagnostics and control of technical systems and their elements. New technologie
  • Date submitted
    2007-11-05
  • Date accepted
    2008-01-22
  • Date published
    2008-05-01

Laboratory investigations of the pre-existing actuator of the aggregate of iron-manganese nodule collection

Article preview

After disintegration of the USSR the Russian Federation is compelled to buy manganese ores abroad. In a shelf zone of the seas washing borders of the Russian Federation, there are deposits ferromanganese concretion which industrial development will allow to solve partially a problem of absence of own manganous raw material. Existing means for development of firm minerals of a sea-bottom do not allow to fulfil effectively the given deposits, therefore creation new winning machine combining high efficiency and ecological safety is an actual scientific and technical problem.

How to cite: Jungmeister D.A., Bolshunov A.V., Smirnov D.V. Laboratory investigations of the pre-existing actuator of the aggregate of iron-manganese nodule collection // Journal of Mining Institute. 2008. Vol. 178. p. 198-200.
Diagnostics and control of technical systems and their elements. New technologie
  • Date submitted
    2007-11-08
  • Date accepted
    2008-01-23
  • Date published
    2008-05-01

Development and research of the arrangement of the executive body of the tunneling complex for the mines of OJSC Metrostroy

Article preview

In clause the variant of configuration of an agency to passed a complex for mines Metrostroja of Saint Petersburg is presented. Formulas and results of calculation of key parameters of an agency of a complex on the COMPUTER by Poderni R.J.'s technique for hydraulicimpact and modernized program KOR_N for hydraulic mills are resulted. Use of hydraulic mills of longitudinal rotation as an agency on working off of a face is proved. The cycle to passed works of a complex is stated.

How to cite: Jungmeister D.A., Ignatiev S.A., Burak A.Y., Konovalov S.A. Development and research of the arrangement of the executive body of the tunneling complex for the mines of OJSC Metrostroy // Journal of Mining Institute. 2008. Vol. 178. p. 201-206.
Diagnostics and control of technical systems and their elements. New technologie
  • Date submitted
    2007-11-26
  • Date accepted
    2008-01-20
  • Date published
    2008-05-01

Increase of reliability of machines and mechanisms operation in underground constructions of cryolithozone

Article preview

Results of researches on influence of a thermal mode on reliability of work of machines and mechanisms in underground construction of the North are analyzed. It is shown, that by a choice of rational ways of regulation of a thermal mode and technical actions, maintenance of normative parameters of operation of mountain machines is possible at construction of underground constructions and robing in mines of the North.

How to cite: Galkin A.F. Increase of reliability of machines and mechanisms operation in underground constructions of cryolithozone // Journal of Mining Institute. 2008. Vol. 178. p. 207-209.