-
Date submitted2024-03-29
-
Date accepted2024-11-07
-
Date published2025-02-26
Well killing with absorption control
The development of new fields with low-permeability reservoirs required the introduction of new production technologies, of which the most significant for well killing and underground repair were multi-ton hydraulic fracturing, the simultaneous operation of two or three development sites by one well grid, and an increase in the rate of fluid extraction. These global decisions in field development have led to the need to search for new effective materials and technologies for well killing. The article is devoted to the analysis of problems associated with the process of killing production wells in fields characterized by increased fracturing, both natural and artificial (due to hydraulic fracturing), with reduced reservoir pressure and a high gas factor. The relevance of the analysis is due to the increase in the number of development sites where complications arise when wells are killed. Particular attention is paid to technical solutions aimed at preserving the filtration and capacity properties of the bottomhole formation zone, preventing the absorption of process fluid, and blocking the manifestation of gas. The classification of block-packs used in killing is given, based on the nature of the process fluid. Suspension thickened water-salt solutions are considered, forming a waterproof crust on the surface of the rock, which prevents the penetration of water and aqueous solutions into the formation. This approach ensures the safety and efficiency of killing operations, especially when working with formations in which maintaining water saturation and preventing the ingress of the water phase are of critical importance. Modern trends in the development of technology are revealed, and promising areas for further improvement of well killing with absorption control are outlined.
-
Date submitted2024-07-28
-
Date accepted2024-11-26
-
Date published2024-12-12
From import substitution to technological leadership: how local content policy accelerates the development of the oil and gas industry
- Authors:
- Oleg V. Zhdaneev
- Ivan R. Ovsyannikov
Achieving technological sovereignty implies accelerating innovation and reducing import dependence. An effective tool for addressing these challenges is local content policy (LCP). The purpose of this study is to assess the impact of LCP on innovation activity in oil and gas companies and to provide recommendations for enhancing the effectiveness of this policy in Russia. The paper analyzes the influence of LCP on innovation levels in the oil and gas sector, drawing on examples from 10 countries. A positive short-term impact of LCP on innovation was identified in Brazil, Malaysia, and Saudi Arabia, with long-term effects observed in China and South Africa. Recommendations for improving the effectiveness of LCP in Russia are supplemented with a methodology for calculating the level of technological sovereignty. A refinement of the method for solving the «responsiveness» problem, incorporating the level of localization, has been proposed.
-
Date submitted2023-07-27
-
Date accepted2024-06-03
-
Date published2024-12-25
Normalized impulse response testing in underground constructions monitoring
Impulse Response testing is a widespread geophysical technique of monolithic plate-like structures (foundation slabs, tunnel lining, and supports for vertical, inclined and horizontal mine shafts, retaining walls) contact state and grouting quality evaluation. Novel approach to data processing based on normalized response attributes analysis is presented. It is proposed to use the energy of the normalized signal calculated in the time domain and the normalized spectrum area and the average-weighted frequency calculated in the frequency domain as informative parameters of the signal. The proposed technique allows users a rapid and robust evaluation of underground structure’s grouting or contact state quality. The advantage of this approach is the possibility of using geophysical equipment designed for low strain impact testing of piles length and integrity to collect data. Experimental study has been carried out on the application of the technique in examining a tunnel lining physical model with a known position of the loose contact area. As examples of the application of the methodology, the results of the several monolitic structures of operating municipal and transport infrastructure underground structures survey are presented. The applicability of the technique for examining the grouting of the tunnel lining and the control of injection under the foundation slabs is confirmed. For data interpretation the modified three-sigma criteria and the joint analysis of the attribute’s behavior were successfully used. The features of the field work methodology, data collection and analysis are discussed in detail. Approaches to the techniques' development and its application in the framework of underground constructions monitoring are outlined. The issues arising during acoustic examination of reinforced concrete plate-like structures are outlined.
-
Date submitted2022-11-06
-
Date accepted2022-11-29
-
Date published2022-12-29
Technological sovereignty of the Russian Federation fuel and energy complex
- Authors:
- Oleg V. Zhdaneev
The review to achieve technological sovereignty of the Russian fuel and energy complex (FEC) in the ongoing geopolitical situation is presented in the article. The main scope has been to identify the key technology development priorities, restrictions and internal resources to overcome these utilizing the developed by the author the innovative methodology that consists of novel approaches to calculate level of local content, digitalization, business continuity andinteractions with military-industrial complex. Some organizational changes have been proposed to intensify the development of hi-tech products for the FEC and related industries, including establishment of the state committee for science and technology and the project office of lead engineers for the critical missing technologies. Two successful examples to utilize the described in the paper methodology is presented: the first domestic hydraulic fracturing fleet and polycrystalline diamond compact cutter bit inserts.
-
Date submitted2021-05-31
-
Date accepted2022-03-24
-
Date published2022-07-13
Mathematical model of linear and non-linear proppant concentration increase during hydraulic fracturing – a solution for sequential injection of a number of proppant types
It is known that much of the technology aimed at intensifying fluid inflow by means of hydraulic fracturing involves the use of proppant. In order to transport and position grains in the fracture, a uniform supply of proppant with a given concentration into the fracturing fluid is ensured. The aim of the operation is to eliminate the occurrence of distortions in the injection program of proppant HF. A mathematically accurate linear increase of concentration under given conditions is possible only if the transient concentration is correctly defined. The proposed approach allows to correctly form a proppant HF work program for both linear and non-linear increase in proppant concentration. The scientific novelty of the work lies in application of a new mathematical model for direct calculation of injection program parameters, previously determined by trial and error method. A mathematical model of linear and non-linear increase of proppant concentration during HF was developed. For the first time, an analytical solution is presented that allows direct calculation of parameters of the main HF stages, including transient concentrations for given masses of the various types of proppant. The application of the mathematical model in formation of a treatment plan allows maintaining correct proppant mass distribution by fractions, which facilitates implementation of information and analytical systems, data transfer directly from a work program into databases. It is suggested to improve spreadsheet forms used in production, which would allow applying mathematical model of work program formation at each HF process without additional labour costs. The obtained mathematical model can be used to improve the software applied in the design, modelling and engineering support of HF processes.
-
Date submitted2020-05-13
-
Date accepted2021-05-21
-
Date published2021-09-20
Increasing the efficiency of technological preparation for the production of the manufacture components equipment for the mineral resource complex
An increase of components production for the equipment intended for oil and gas production is a key factor for analyzing existing technological processes and searching for new technological solutions to improve the efficiency of the production process and the quality of components. The article presents a simulation model designed to determine the rational technological processing parameters for the production of the “Centralizer shell” part. The basis for optimizing the working cycle of a production line is synchronization based on the principle of proportionality, which involves equalizing the duration of all technological operations with the rhythm of the production line. Synchronization of technological operations on the production line is carried out by choosing rational cutting parameters for each technological transition (cutting speed, feedrate, number of working passes). The “Centralizer shell” part is made of titanium alloy VT16, which has high strength, corrosion resistance and ductility. For the part under consideration, the permissible values of the cutting parameters were determined based on the calculation of the total processing error, as well as the frequency of replacement of the worn cutting tool. The simulation model described in the article made it possible to increase the efficiency of the production process due to the synchronization of technological operations and the search for rational technological parameters, as well as to improve the manufacturing quality of the “Centralizer shell” part by analyzing the processing error at various parameters of the technological process.
-
Date submitted2019-07-06
-
Date accepted2019-08-25
-
Date published2019-12-24
Improving the efficiency of technological preparation of single and small batch production based on simulation modeling
Technological preparation of production is an integral stage of the production process, which is characterized by high complexity, which is largely felt in the conditions of single and small-scale types of production. The effectiveness of technological preparation of production is increased through automation with the use of simulation modeling. The objective of the study is to develop a simulation model that allows you to determine a rational version of the process for processing a batch of parts. The simulation model described in the article allows to analyze the production schedule of the enterprise, build processing routes, evaluate options for using various types of workpieces and technological equipment, determine the acceptable values of cutting conditions, and choose a rational variant of the technological process of processing a batch of parts. The developed simulation model is based on the principles of modular technologies, the part is considered as a combination of individual elementary surfaces. Each elementary surface contains information about the technological processing route, technological equipment and the type of technological equipment used in its manufacture, cutting conditions and the size of the allowance for each processing stage. The rational choice of the technological process is selected on the basis of multicriteria analysis according to three criteria: the value of variable costs, the production time of a batch of parts and the value of the processing error. The analysis of these criteria is made and the parameters that have the greatest impact on their value are determined. The developed classification of surface elements is described: design elements, technological elements, basic elements, as well as a mathematical model based on which the calculation of the values of the criteria for choosing a rational option.
-
Date submitted2019-01-11
-
Date accepted2019-03-17
-
Date published2019-06-25
Improving methods of frozen wall state prediction for mine shafts under construction using distributed temperature measurements in test wells
- Authors:
- L. Yu. Levin
- M. A. Semin
- O. S. Parshakov
Development of mineral deposits under complex geological and hydrogeological conditions is often associated with the need to utilize specific approaches to mine shaft construction. The most reliable and universally applicable method of shaft sinking is artificial rock freezing – creation of a frozen wall around the designed mine shaft. Protected by this artificial construction, further mining operations take place. Notably, mining operations are permitted only after a closed-loop frozen section of specified thickness is formed. Beside that, on-line monitoring over the state of frozen rock mass must be organized. The practice of mine construction under complex hydrogeological conditions by means of artificial freezing demonstrates that modern technologies of point-by-point and distributed temperature measurements in test wells do not detect actual frozen wall parameters. Neither do current theoretical models and calculation methods of rock mass thermal behavior under artificial freezing provide an adequate forecast of frozen wall characteristics, if the input data has poor accuracy. The study proposes a monitoring system, which combines test measurements and theoretical calculations of frozen wall parameters. This approach allows to compare experimentally obtained and theoretically calculated rock mass temperatures in test wells and to assess the difference. Basing on this temperature difference, parameters of the mathematical model get adjusted by stating an inverse Stefan problem, its regularization and subsequent numerical solution.
-
Date submitted2018-11-14
-
Date accepted2019-01-06
-
Date published2019-04-23
Prospects of geomechanics development in the context of new technological paradigm
- Authors:
- V. L. Trushko
- A. G. Protosenya
The article describes the role of geomechanics for forecasting the development of geosystems and ensuring the safety of mining operations during the transition to a new technological paradigm. The state and prospects of development of the mineral resource base, including the Arctic zone of the Russian Federation, are considered. The directions of technological breakthroughs and the possibility of transforming industrial production based on «cross-cutting» technology and the digital economy are presented. The analysis of geomechanical problems was carried out considering advanced technological changes and the rapid growth of requirements for the preservation of the Earth’s interior and natural landscapes. The concept of the development of geomechanics and geodynamics to ensure rational subsoil use in terms of the use of «breakthrough» technology is proposed, and the need to integrate scientific and industry collaboration into the system of engineering and professional education is shown.
-
Date submitted2018-01-02
-
Date accepted2018-03-08
-
Date published2018-06-22
Noncontact laser control of electric-physical parameters of semiconductor layers
- Authors:
- A. B. Fedortsov
- A. S. Ivanov
Non-contact non-destructive laser-interferometric methods for measuring several electrophysical parameters of semiconductor and dielectric layers are proposed. They are the lifetime of charge carriers for electrons and holes separately; parameters of recombination centers, namely their concentration and capture cross-sections; bulk volume lifetime and rate of surface recombination, as well as the diffusion length of charge carriers. The methods are based on the interference-absorption interaction in a semiconductor of two laser radiations with different wavelengths. Short-wave injection radiation generates additional charge carriers in the material, which leads to a change in its optical constants at the wavelength of the other – long-wavelength probing laser radiation – and to modulation of this radiation as it passes through the sample of the studied material. The means for implementing the proposed methods and methods for processing the modulation signal for determining the parameters of the investigated samples are developed. The methods have been successfully tested on samples of such materials as germanium, silicon, indium antimonide and cadmium-mercury-tellurium alloy. It is shown that the methods can be used both in scientific research and electronic industry.
-
Date submitted2017-11-17
-
Date accepted2018-01-05
-
Date published2018-04-24
Estimation of the relation of strength and ultrasound speed in glass-reinforce plastic
- Authors:
- A. I. Potapov
In mining machinery, details and products made of composite materials are widely used, especially from GRP (glass-reinforce plastic). The work evaluates the relationship between the strength and the speed of ultrasound for nondestructive testing of strength in an article made of composite materials such as GDR with the use of a pulsed ultrasonic method. Methods for estimating the connection, the method of mechanical compression tests and mathematical processing and establishing the relationship between the ultrasonic velocity and the strength of GRP are considered. The results of experimental studies on establishing the relationship between the strength of GRP on compression and the speed of longitudinal ultrasonic waves are presented. As a result of statistical processing of the experimental results, equations of the relationship between the compressive strength and the ultrasonic velocity in fiberglass are obtained.
-
Date submitted2017-09-17
-
Date accepted2017-11-06
-
Date published2018-02-22
Collaborative interpretation of the data obtained by resistivity and ground penetrating radar methods for assessing the permeability of sandy clay soils
- Authors:
- D. A. Lalomov
- V. V. Glazunov
A method for estimating the filtration factor of sandy clay soils is considered on the basis of a joint interpretation of the data of a set of methods of engineering electrical exploration, including electrical resistivity tomography and ground penetrating radar studies. The solution of this problem is based on the use of known empirical connections between the imaginary and real parts of the complex dielectric permittivity, specific electrical resistance, and Q factor. An example of the effective joint use of the ground penetrating radar and non-contact electrical resistivity tomography shows how to obtain qualitative and quantitative estimates of a changing filtration factor in a draining road layer. It is necessary to use precise engineering geological information in order to provide the required estimates. The proposed approach makes it possible to describe continuous profiles of a pavement and underlying layers by ground penetrating radar and electrical resistivity tomography, as well as to assess soil properties when conducting an electrical survey from the surface of asphalt concrete pavement. Recommendations for the implementation of the developed methods of complex engineering and geophysical research are given for solving issues of repair work design, supervision, and quality control of road construction.
-
Date submitted2015-08-19
-
Date accepted2015-10-17
-
Date published2016-04-22
Development of institute of financial control in construction
- Authors:
- V. P. Grakhov
- O. L. Chazova
The article is devoted to the complex research of development of Institute of financial control in construction. Based on the analysis of approaches of researchers to definition of concept «financial control», sets out its objectives and importance. Identifies and describes the characteristic features of state and non-state financial control. To examine the existing mechanisms of financial control system in construction in General, to prevent violations and to create the basis for the adoption of specific management decisions, it is proposed to study three main areas. Special attention is paid to the analysis of the current legislation in the field of formation of financial control in the construction and practice of its application. Presents substantial changes in the legal regulation of the contract system in the sphere of procurement for state and municipal needs, including the adjustment of the scheme of carrying out of competitive procedures by the customer. In this regard, an important role plays the method of calculation of the final rating of participants of procurement procedures, allowing to determine the winner in accordance with predetermined criteria and their weighting factors. This area is also complemented by the consideration of issues related to the establishment of the procedure for the implementation of banking support contracts, allowing to provide the customer more effective control over the observance of contractual obligations with suppliers (contractors, performers). The conducted researches allow to draw a conclusion about the need to rethink and address issues related to efficiency of use of budget investments in objects of capital construction. In this regard, the main priorities of improving financial control in the construction industry to achieve the desired rates of economic development.
-
Date submitted2014-12-25
-
Date accepted2015-02-07
-
Date published2015-12-25
Nondestructive control of elasticity modulus anisotropy of composite materials in the products
- Authors:
- A. I. Potapov
The technique of nondestructive control of anisotropy of composite materials in a product us-ing a pulse ultrasonic method is considered in the article. Calculated dependence to determine the degree of filler orientation in a polymeric composite material with varying filler laying is shown. The following filler laying is considered: chaotic, longitudinally cross, unidirectional. In addition, experimental results of anisotropy control of the elastic modulus in glass-reinforced plastics with different degrees of anisotropy using the pulsed ultrasonic method are given in the article.
-
Date submitted2014-11-24
-
Date accepted2015-01-02
-
Date published2015-10-26
Complex processing of apatite-nepheline ores based on the creation of closed-loop process flow sheets
- Authors:
- A. I. Alekseev
The article presents the chemical and engineering fundamentals of processing apatite and nepheline concentrates directly on the Kola Peninsula. Implementation of the existing separate processing of nepheline and apatite concentrates demonstrates inefficiency of these technologies due to the formation of waste calcium sulfate and calcium silicate, which have so far not found a practical use and are wastes stored in sludge repositories of the Russian Federation. Suggested new scientific and technical solutions will allow enterprises to significantly increase the volume of production of new in-demand marketable products due to rational and complex use of mineral raw materials of the Kola Peninsula, reduce their costs while decreasing the volume of rock extraction and eliminate waste creating a closed-loop technological cycle of processing apatite and nepheline ores.
-
Date submitted2014-10-02
-
Date accepted2014-12-08
-
Date published2015-08-25
Assessment of complicated systems quality on the basis of stochastic similarity methods
- Authors:
- D. A. Pervukhin
- A. A. Klavdiev
Modern development of technology is characterized by sharp complication of the tasks solved at production of products, high requirements to their reliability, short deadlines of creation and introduction in operation, aspiration to reduce costs of development of a product at satisfaction of the set conditions. The existing methods of an assessment and quality control of a product by results of tests are often inefficient in the conditions of the determined experiment or the diverse volume-limited statistical information on results of physical modeling, prototyping and tests of a small number of samples available. One of the solutions of the problem of ensuring quality and reliability at a design stage and production of products is an application of the theory of similarity and modeling. In the article the direction of development of the stochastic similarity theory for the effective solution of problems of an assessment and quality control of complicated systems in the course of their creation and operation is offered. The main theorems of similarity are formulated, the criterion of stochastic similarity in the form of the relation of functions of distribution of parameters (characteristics) of systems is theoretically reasonable and experimentally confirmed. Examples of the solution of applied tasks are given. Further development of the theory of stochastic similarity will allow us to advance in the research of non-limiting distributions which are a little described in classical probability theory and mathematical statistics, especially in that their part which will give the chance to manipulate selections of a small volume and censored selections obtaining maximum information from them.
-
Date submitted2009-10-15
-
Date accepted2009-12-30
-
Date published2010-09-22
Geotechnical monitoring in cryolite zone. Ecological or industrial safety
- Authors:
- A. P. Popov
The article contains the principal methodological points of the technology of geotechnical monitoring of engineer constructions in the cryolite zone. By way of practical example it was shown the efficiency of its application for reduction of risks in the industrial and economic activities of Gasprom Co by means of creation of numerical models of stability of ground basements and foundations, timely control of mechanical safety of buildings and constructions, qualitative substantiated numerical forecasting and potential variant modeling of aftereffects of technical decisions for stabilization of a situation. Geotechnical monitoring in contrast to the industrial production ecological monitoring is the technology for control of mechanical safety of buildings and constructions at the stages of their designing, construction and exploitation.
-
Date submitted2009-10-12
-
Date accepted2009-12-26
-
Date published2010-09-22
Methods and techniques for control of rockburst-hazard in underground mining at ore mines of the Far-East district
An assessment is given to the present-day state of control of dynamic rock pressure manifestations in the rockburst-hazardous ore mines of the Far-East district. Consideration is given to the used methods and facilities for control of rock pressure and the ways for their improvement . Basic foundations of methodical approaches to the assessment of geomechanical state of rock mass by data of geoacoustic control are considered.
-
Date submitted2009-09-21
-
Date accepted2009-11-11
-
Date published2010-06-25
Procedure for determination of parameters of a condesing structures with a movable capacitor plates
- Authors:
- N. S. Pshchelko
Procedure for definition of parameters of a condenser structure cap is considered. The procedure allows by means of one operation – volt – capacitance characteristic measuring – to define the whole complex of the major parameters of a cap – size of a working air gap, a membrane deflection, surface electret potential and a membrane tension. The expressions for capacitance of a condenser structure cap as a function of specified parameters are obtained. Analytical expression for capacitance of a cap depending on the specified parameters and measuring of its volt-capacitance characteristic allow to define these parameters by solving corresponding system of equations. The procedure considered in the present work is a not-destroying quality monitoring method.
-
Date submitted2009-09-01
-
Date accepted2009-11-09
-
Date published2010-06-25
Thermal, power and economic parameters of innovative technology of development of nearsurface geothermal deposits
- Authors:
- E. I. Boguslavskiy
Deficiency of organic fuel and necessity of protection of environment cause growth of rates of development practically inexhaustible, everywhere widespread and ecologically pure geothermal resources. For needs of a heat supply especially actively developing innovative technology of development of near-surface geothermal resources has great value. Operative mining of the production schedules containing optimum parametres and indicators PSGT is necessary for designing and building of near-surface systems of a geothermal heat supply (PSGT). The imitating economic-mathematical model is developed, the algorithm and the program of their optimisation are created. Computer calculations for a wide range of natural, power and economic conditions are carried out. Key parametres and indicators PSGT are defined. Their optimum values for a heat supply of local consumers (apartment houses) in the conditions of the Yaroslavl area are recommended.
-
Date submitted2009-08-25
-
Date accepted2009-10-24
-
Date published2010-02-01
Using of electric field for manufacturing and nondestructive testing of a capacitor sensors and actuators
- Authors:
- N. S. Pshchelko
- V. V. Buevich
Some designs of capacitor sensors and actuators which work is based on electric field use are considered. It is shown that these designs are rather cheap in manufacturing, but thus possess good technical characteristics. The theoretical substantiation of possibility of electrostatic forces use for balancing of a pressure difference in the corresponding measuring device is adduced. Procedure for definition of parameters of a condenser structure cap is considered. The procedure allows by means of one operation – volt-capacitance characteristic measuring – to define the whole complex of the major parameters of a cap-size of a working air gap, a membrane deflection, surface electret potential and a membrane tension. Analytical expression for capacitance of a cap depending on the specified parameters and measuring of its volt-capacitance characteristic allow to define these parameters by solving corresponding system of equations. The procedure considered in the present work is a method of a not-destroying control.
-
Date submitted2008-10-08
-
Date accepted2008-12-08
-
Date published2009-12-11
Georadar investigations of shallow depth оf geological section and engineering constructions
- Authors:
- V. V. Glazunov
- N. N. Efimova
The GPR-method showing high resolution, great performance and sensitivity to minor variations in the composition and conditions of soils and material has assumed a role of the leading geophysical method for looking at the upper part of the geological section. This paper presents the advanced directions of GPR application for engineering problems solution.
-
Date submitted2008-10-15
-
Date accepted2008-12-05
-
Date published2009-12-11
Prospects of nickel industry in the Urals in the light of ore field structure study in supergene nickel deposits
Tectonic fractures of meridian spread, masked by block system of neotectonic breaks, play the leading role in structural control of nickel mineralization in supergene nickel deposits in the Urals. The deposits have long-term genesis and polygenic character. They are characterized by intensive tectonic and hydrothermal workup of Paleozoic substrate and block structure with small amplitude of vertical displacement. All of them have a two-floor structure, where upper supergene floor has a «background» of lower hydrothermal floor. This fact considerably increases the field of geological prospecting and searching of new oxide-silicate nickel deposits in the Uralian region.