-
Date submitted2023-10-04
-
Date accepted2024-09-24
-
Date published2025-02-25
Crustal movement model in the ITRF2020 – a case study in Northern Vietnam
- Authors:
- Bui Thi Hong Tham
- Phi Truong Thanh
In the North area of Vietnam, the crustal movement velocity of 38 GNSS points belonging to different international Earth reference frames (ITRF2000, ITRF2005, ITRF2008) is adjusted to the international Earth reference frame ITRF2020. This is the latest frame up to now. Since then, the picture of crustal movement in the North area of Vietnam has been unified in a dynamic coordinate system. In the study area, the rate of crustal movement is about 35 mm/year, and the direction of displacement is from northwest to southeast. To build a model of the crustal movement of the Earth in the northern area of Vietnam, the movement velocity data of 38 stations in ITRF2020 is evaluated with high accuracy. All points are also satisfactory. And then, the crustal movement velocity model is built by using the collocation method in the form of the 3-order Markov function. Within 38 stations, 34 stations are used to build the model and 4 remaining stations are used as checked stations. The obtained results show that the Earth's crust movement velocity model has an accuracy of about 2 mm/year for movement velocity and 2 deg for movement direction. This is the first model of Earth's crust movement in the North of Vietnam that has been built in the latest dynamic coordinate system ITRF2020. These results have important significance in the research and practical application of the movement of the Earth's crust. The steps of building the movement velocity model in this study can be applied to other experimental areas in the territory of Vietnam.
-
Date submitted2022-05-23
-
Date accepted2022-07-21
-
Date published2023-02-27
Alluvial tin mining by spray-suction borehole method: a case study on remaining alluvial tin reserves in Bangka Belitung, Indonesia
The area of the Bangka Belitung Islands, which is a potential area for alluvial tin deposits in Indonesia, has been affected by the destruction of tin reserves on the mainland due to rampant artisanal mining, which has left remnants of small-dimensional reserves. The remnants of these reserves can no longer be mined using the hydraulic mining of open pit method due to the small dimensions of the deposits. The hypothesis is that such sedimentary conditions can only be mined by the borehole method. This research aimed to design tools and perform test mining using the borehole method with a spray-suction mechanism. This research produced a novelty, namely, a method and parameters for alluvial tin deposits mining using borehole mining methods, such as the excavation capacity, excavation radius, mining recovery, and dilution factor. The benefit of this research is expected to provide an opportunity to increase the amount of onshore alluvial tin reserves to support tin production.
-
Date submitted2021-07-05
-
Date accepted2022-11-17
-
Date published2022-12-29
Determination of suitable distance between methane drainage stations in Tabas mechanized coal mine (Iran) based on theoretical calculations and field investigation
A large amount of gas is emitted during underground mining processes, so mining productivity decreases and safety risks increase. Efficient methane drainage from the coal seam and surrounding rocks in underground mines not only improves safety but also leads to higher productivity. Methane drainage must be performed when the ventilation air cannot dilute the methane emissions in the mine to a level below the allowed limits. The cross-measure borehole method is one of the methane drainage methods that involves drilling boreholes from the tailgate roadway to an un-stressed zone in the roof or floor stratum of a mined seam. This is the main method used in Tabas coal mine N 1. One of the effective parameters in this method is the distance between methane drainage stations, which has a direct effect on the length of boreholes required for drainage. This study was based on the measurement of ventilation air methane by methane sensors and anemometers placed at the longwall panel as well as measuring the amount of methane drainage. Moreover, in this study, the obtained and analyzed data were used to determine the suitable distance between methane drainage stations based on the cross-measure borehole method. In a field test, three borehole arrangements with different station distances in Panel E4 of Tabas coal mine N 1 were investigated. Then, the amounts of gas drained from these arrangements were compared with each other. The highest methane drainage efficiency was achieved for distances in the range of 9-12 m between methane drainage stations.
-
Date submitted2022-04-14
-
Date accepted2022-07-21
-
Date published2022-11-03
In-situ leaching of molybdenum and uranium by percarbonate and chloride-hypochlorite solutions
In-situ leaching of molybdenum and uranium is becoming an increasingly common process. The features of the material composition of ores, leading to a decrease in their filtration properties, were considered. Activation leaching with leaching solutions that have undergone electrophotochemical activation before contact with the ore mass were studied. Activation preparation of leaching solutions promotes the synthesis of clustered water molecules with collectivized protons and hydroxyl ions, as well as active forms of oxygen and hydrogen. Cell leaching of molybdenum from mature tailings of the Shakhtaminsk deposit was studied experimentally. After pre-oxidation with an active carbonate solution, a model borehole leaching was carried out with a chloride-hypochlorite solution. Molybdenum extraction on resin a was 85 % in 30 days. Experiments on the percolation leaching of uranium from the ores of the Uchkuduk and Sugraly deposits confirmed the potential possibility of a significant increase in the extraction of uranium by electrophotoactivated percarbonate solutions relative to aqueous solutions of sodium and ammonium carbonate. When leaching with carbonate solutions without an additional oxidizing agent, the extraction of uranium from the Sugraly deposit ore sample was 52 and 59 % (sodium carbonate and ammonium carbonate). The use of hydrogen peroxide as an oxidizing agent made it possible to achieve 87-88 % extraction into pregnant solutions in 21 days without pre-oxidation. The performed studies confirm the processing capability of extracting uranium and molybdenum by percolation leaching in columns and borehole leaching.
-
Date submitted2020-06-16
-
Date accepted2021-03-29
-
Date published2021-09-20
Empirical regularities investigation of rock mass discharge by explosion on the free surface of a pit bench
- Authors:
- Igor A. Alenichev
- Ruslan A. Rakhmanov
Minimizing the discharge of blasted rock mass into the developed space of the pit is a very relevant area for study, as it allows to increase the processability of work and reduce the cost of mining. The article presents the results of experimental industrial explosions, during which the study of this issue was conducted. The main purpose of the work was to establish the key factors affecting the volume of rock mass discharge to the pit haulage berm. During the analysis of the world experience of research on this topic, the key factors affecting the formation of collapse and discharge – natural and technological – are identified. The method of conducting experiments and collecting data for analyzing the influence of technological parameters of location, charging and initiation of wells on the volume of rock mass discharge is described. It is established that the main discharge to the pit haulage berm is formed by the volume of rock mass limited by the prism of the slope angle. With a sufficient rock mass displacement from the edge of the bench crest towards the center of the block, only the wells of the 1st and 2nd rows participate in the discharge formation. Empirical dependences of the total volume of rock mass discharge on the length of the block along the bench crest, the specific consumption of explosives, the size of a rock piece P 50 and the rate of rock breaking are obtained. The obtained results can be used to design the parameters of the drilling and blasting operations (DBO), as well as to predict and evaluate the possible consequences of a mass explosion in similar mining and geological conditions.
-
Date submitted2020-05-24
-
Date accepted2020-07-23
-
Date published2020-11-24
Estimation of ore contour movements after the blast using the BMM system
Measurement of ore movements by blast is one of the key components of the quality control system at any mining enterprise, which allows to obtain the accuracy necessary for determining the location of ore contours. About 15 years ago, a monitoring system was developed in Australia that allows mine personnel to make three-dimensional measurements of ore blocks movement at each blast. Studies have shown that ore blocks movement is extremely variable, and it characterized by a complete absence of a deterministic component. The consequence is that modeling ore contour movements during the blast will be inaccurate, and the best results for the mining enterprise can only be achieved by directly measuring the movement. The technology of measuring ore contours movements considered in the article is based on three-dimensional movement vectors obtained in different parts of the blasted block, characterized by different movements. It is obvious that the accuracy of determining the ore contours position after the blast is proportional to the number of measurements made on the block. Currently, the movement control technology based on the BMM system is actively used by global mining companies, its use reduces losses and dilution of ore. In 2017, the pilot implementation of the BMM system was started at the Olympiadinsky GOK, and the system is being implemented in several Russian mining companies.
-
Date submitted2018-11-18
-
Date accepted2019-01-17
-
Date published2019-04-23
Calculation of elastoviscoplastic displacement of well walls in transversal and isotropic rocks
- Authors:
- A. G. Gubaidullin
- A. I. Moguchev
The relevance of the work is justified by the need to improve the technical and economic indicators of well construction based on forecasting and preventing drilling tools sticking due to the narrowing of an open well bore in the intervals of transversely isotropic rocks. A mathematical model of elastic-viscous-plastic displacement of the walls of inclined and horizontal wells has been developed during the narrowing of the open borehole due to rock creep in the intervals of transversely isotropic rocks. In the program developed based on this mathematical model, the calculation of the elastic-viscous-plastic displacement of the walls of an obliquely directed and horizontal well in the reservoir of argillite from the Western Siberia deposit was carried out. As a result of the calculation, it was established that after opening the rock with bits, the cross-section of the open borehole due to the rock creep eventually takes the form of an ellipse, the small axis of which is in the plane of the upper wall of the well and decreases with time.
-
Date submitted2018-01-04
-
Date accepted2018-03-08
-
Date published2018-06-22
Influence of mining-geological conditions and technogenic factors on blastholes stability during open mining of apatite-nepheline ores
- Authors:
- M. N. Overchenko
- S. A. Tolstunov
- S. P. Mozer
The paper presents the results of borehole stability research and considers possible causes of emergencies. The features of the blast hole drilling process are analyzed taking into account the properties of the rock. Based on the distribution of speed of drill fines removal from the well, an algorithm for selecting drilling modes is proposed. The nature of change in the size of the holess over time has been analyzed. This paper investigates the influence of rock fracturing and its water content on borehole stability. Possible options for eliminating the man-made impact on the massif near holes and options for fixing the hole walls with soft shells are suggested. The experimental data on the installation of shells for the conditions of open mining of apatite-nepheline ores are given. The operability and effectiveness of the technology is proved.
-
Date submitted2016-11-21
-
Date accepted2017-01-23
-
Date published2017-04-14
Prospects of obtaining samples of bottom sediments from subglacial lake Vostok
- Authors:
- N. I. Vasilev
- G. L. Leichenkov
- E. A. Zagrivnyi
The paper proves the timeliness of obtaining and examining bottom sediments from subglacial Lake Vostok. Predictive geological section of Lake Vostok and information value of bottom sediments have been examined. Severe requirements towards environmental security of lake examinations and sampling of bottom sediments rule out the use of conventional drilling technologies, as they would pollute the lake with injection liquid from the borehole. In order to carry out sampling of bottom sediments from the subglacial lake, it is proposed to use a dynamically balanced tool string, which enables rotary drilling without any external support on borehole walls to transmit counter torque. A theoretical analysis has been carried out to assess the operation of the tool string, which is a two-mass oscillatory electromechanical system of reciprocating and rotating motion (RRM) with two degrees of freedom.
-
Date submitted2015-08-21
-
Date accepted2015-10-24
-
Date published2016-04-22
Results of the 5G borehole drilling at russian antarctic station «Vostok» and researches of ice cores
- Authors:
- N. I. Vasilev
- A. N. Dmitriev
- V. Ya. Lipenkov
We produce an information about results and features of the 5G borehole drilling in Antarctic layer at Russian station Vostok. Main regularities of the change structured and physical properties by Antarctic ice layer depth, which determine mechanical and reological properties if ice, which influence to sinking of a borehole and to the maintaining of it in a working condition, the safe and competitive technologies creation for drilling of strong ice layers and the environmentally safe technology of the subglacial reservoirs unsealing. We also produce results of the ice cores researching and the paleoclimatic raws construction, which are reconstructed by the ice cores researching from Vostok station, which is compared with isotopic graph. This graph describes changes of World ocean level.
-
Date submitted2015-07-11
-
Date accepted2015-09-17
-
Date published2016-02-24
The mechanism of rock burst leading to ground destruction of mine openings
- Authors:
- M. G. Mustafin
The article deals with the main issues of studying of one type of rock bursts which lead to gound destruction of coal mine openings. The research is focused on rock burst prediction. Some cases of rock bursts are analised. The paper points out factors affecting this kind of rock failure. It also presents some simulation models and numerical examples. The results of the research show that it is possible to plan safe mining operations under different mining and geological conditions.
-
Date submitted2014-12-09
-
Date accepted2015-02-16
-
Date published2015-12-25
Dynamic study of underground loading machine’s working tool crank-rocker mechanism
- Authors:
- I. P. Timofeev
- I. A. Korolev
The article is devoted to the dynamic study of the underground shovel’s working tool mech-anism, assembled in accordance with a crank-rocker scheme, containing curved wings, as well as to the study of the effect on uneven movement rate, produced by the working tool mechanism; pa-rameters and structural characteristics of the shovel paw design shape. On the basis of a synthesis of the loading machine’s working tool mechanisms, a kinematic scheme with a shovel paw, con-sisting of a straight operating part and a curved working tail, is offered. A dynamic model of the mechanism based on a variable weight of shovel bulk cargo and drive parameters of the working tool is developed, a motion equation is made up. Comparison between statistical indicators of effec-tive output obtained from the shovel loaders drive mechanism and the results of a separate computer simulation of the mechanisms under analysis attest to the proposed model’s performability.
-
Date submitted2009-10-20
-
Date accepted2009-12-11
-
Date published2010-09-22
Monitoring of deformation processes of the earth surface with methods of differential interferometric treatment of radar data
- Authors:
- A. A. Krivenko
- Yu. A. Kashnikov
The Differential Interferometry SAR (DInSAR) has recently become one of the most popular methods to reveal and analyze the subsidence of the ground. This method is considered by researchers to be well suited to solve a problem of small relative ground shifts survey applying the short (centimeter) radio waves.
-
Date submitted2009-10-14
-
Date accepted2009-12-11
-
Date published2010-09-22
Investigation of present-day stress-strain state of rock mass by the results of observations at geodynamic polygons
- Authors:
- S. N. Savchenko
- E. V. Kasparyan
- Yu. G. Smagina
The methods are suggested for treatment of the results of optical distance and levelling measurements at the underground geodynamic polygons involving in their calculation the tensors of additional stresses and deformations, component of rotation and specific energy of deformability. As an example, consideration is given to changes in time of movements, deformations and specific energy of deformability at one of geodynamic polygons of the Kola peninsular.
-
Date submitted2009-10-01
-
Date accepted2009-12-02
-
Date published2010-09-22
Specific manifestations of tectonic and seismic activity in Kuzbass
- Authors:
- A. I. Ekimov
- S. V. Tsirel
The conducted observations demonstrated the substantial growth and variation of nature of tectonic and seismic activity in Kuzbas. Growth of geodynamic risks is marked. Methods for study of observable processes are suggested.
-
Date submitted2009-10-07
-
Date accepted2009-12-22
-
Date published2010-09-22
Providing of safe conditions for mining of shaftbottom protective pillars in deep ore mines at Тalnakh
- Authors:
- V. A. Zvezdkin
- A. G. Anokhin
- R. B. Galaov
Consideration is given to the causes complicating the mining of shaftbottom pillar and protection of shaft lining. The analysis is given to the formation of stress-strain state of the protective pillar and its enclosing rocks. Practical recommendations are given for control of deformation and stresses in the shaftbottom mass during extraction of protective pillars in deep ore mines at Talnakh.
-
Date submitted2009-10-13
-
Date accepted2009-12-29
-
Date published2010-09-22
Assessment of the level of technological production of coal reserves in mine fields with intensive mining of fiat-lying coal seams
- Authors:
- S. G. Baranov
- M. A. Rozenbaum
The levels of technological production of coal reserves in the stoping faces have been determined depending on the main determining factors, such as suitability of conditions, their preparation and equipment of longwalls.
-
Date submitted2009-09-16
-
Date accepted2009-11-15
-
Date published2010-06-25
Directional drilling in ice caps
Directional drilling technology can be used in glacier boreholes to obtain additional ice cores and to pass over sticking drills. Experimental sidetracking of 5G-2 hole in the deep borehole at Vostok station, Antarctica, showed the high efficiency of the directional drilling without using of special whip-stocks to deviate the hole.
-
Date submitted2009-08-05
-
Date accepted2009-10-21
-
Date published2010-02-01
The autoresonant electric drive of the swinging movement pendular vibration exciter vibration jaw crushers
- Authors:
- Yu. A. Gavrilov
- E. A. Zagrivnyi
To use of the autoresonant electric drive of swinging movement for creation of an oscillative motion of crushing jaws of vibrating jaw crushers it is offered in this article. The control system of the electric drive is developed. The results of imitating and physical modelling of the autoresonant electric drive are presented.
-
Date submitted2009-07-17
-
Date accepted2009-09-18
-
Date published2010-04-22
Transformation of the form and angular parameters of rock movement processes with depth at ore deposits
- Authors:
- A. G. Shadrin
- M. A. Shadrin
It was established the increase of movement angles with mining depth and the mechanism of forming the stable natural arching in underground mining of ore deposits. The conditions and parameters of forming the stable natural arching were determined, under which the zone of dangerous deformations localizes inside the ore mass and does not manifest itself on the earth surface. The nomogram for analytical determination of the rock movement angles was developed, and the table was drawn up of the natural arching conditions with due account of main mining-and-geological factors of ore deposit occurrence and its mining.
-
Date submitted2009-07-19
-
Date accepted2009-09-11
-
Date published2010-04-22
Calculation of supports of parallel workings divided with yieldable pillars at anthracite seams
The article presents the methods for calculation of supports of parallel workings divided with yieldable pillars at anthracite seams. Consideration is given to the development of experimental data card for protection and maintenance of paired conveyor entries with using the steelpolymer anchor supports.
-
Date submitted2009-07-20
-
Date accepted2009-09-20
-
Date published2010-04-22
Problematic aspects in rock movement
The paper considers the existing standards in the field of rock movement and protection of engineer constructions from harmful influence of mining operations. It is emphasized the necessity in revision of some standards in compliance with the real mining production.