-
Date submitted2024-03-22
-
Date accepted2024-09-24
-
Date published2025-02-25
Behaviour of cerium (III) phosphate in a carbonate-alkaline medium
- Authors:
- Tatyana E. Litvinova
- Stepan A. Gerasev
The article investigates the behaviour of rare earth metals in carbonate-alkaline systems. The results of experimental studies on rare earth element extraction from phosphogypsum, a large-tonnage industrial waste forming in production of phosphoric acid are presented. Using the liquid phase leaching method, it was possible to extract more than 53 % of rare earth elements from old phosphogypsum and more than 69 % from fresh phosphogypsum due to solid phase treatment with a 4 mol/l potassium carbonate solution at temperature 90 °C. The behaviour of model cerium (III) phosphate in a carbonate-alkaline medium is characterized: a solubility isotherm is obtained as well as the dependences of the degree of cerium extraction into solution on temperature, carbonate ion concentration, interphase ratio, stirring intensity, and pH. The ability of soluble rare earth element complexes to precipitate over time was established, which was confirmed using cerium and neodymium as an example. Within 240 h after the end of the experiment, approximately 25 % of cerium and 17 % of neodymium were precipitated from the liquid phase. A similar property was recorded in representatives of the light group and was not noted in elements of the heavy group. The ability to self-precipitate in future can serve as a basis for developing an alternative approach to separating rare earth metals into groups after extraction in a carbonate ion medium. Also, based on the analysis of experimental data, the mechanism of cerium (III) phosphate dissolution in a carbonate-alkaline medium was characterized. An assumption was made that rare earth metal phosphates dissolve sequentially passing into an insoluble carbonate and then into a soluble carbonate complex.
-
Date submitted2023-07-07
-
Date accepted2023-12-27
-
Date published2024-08-26
Landslide hazard assessment in Tinh Tuc town, Cao Bang province, Vietnam using Frequency ratio method and the combined Fractal-frequency ratio method
Landslides are one of the most frequent natural disasters that cause significant damage to property in Vietnam, which is characterized by mountainous terrain covering three-quarters of the territory. In 17 northern mountainous provinces of the country, over 500 communes are at a high to very high landslide hazard. The main goal of this study was to establish landslide hazard maps and conduct a comparative evaluation of the efficiency of the methods employed in Tinh Tuc town, Cao Bang province. The landslide hazard assessment was carried out in this study using the combined Fractal-frequency ratio (FFR) and the Frequency ratio (FR) methods. The FR method is based on the actualist principle, which assumes that future landslides may be caused by the same factors that contributed to slope failure in the past and present. The FFR method is based on the determination of the fractal dimension, which serves as a measure of the landslide filling density in the study area. Eight landslide-related factors were considered and presented in cartographic format: elevation, distance to roads, slope, geology, distance to faults, land use, slope aspect, and distance to drainage. Determining the area under the receiver operating characteristic curve (ROC-AUC) and verification index (LRclass) was performed to assess the performance of prediction models and the accuracy of the obtained maps. As a result, five zones were identified for the study area, characterized by very low, low, moderate, high, and very high landslide hazards. The analysis of the reliability of the obtained landslide hazard maps using the AUC and LRclass indices revealed that the FFR model has a higher degree of reliability (AUC = 86 %, LRclass = 86 %) compared to the FR model (AUC = 72 %, LRclass = 73 %); therefore, its use is more effective.
-
Date submitted2022-03-14
-
Date accepted2022-05-13
-
Date published2022-07-26
Unique titanium Deposits of Timan: genesis and age issues
The article critically analysesthe hypotheses about the formation, age, and sources of material of large Timan titanium deposits, which were previously considered ancient buried placers formed along the weathering crusts of the Riphean shales. We discuss an alternative hydrothermal-metamorphic hypothesis about the formation of these deposits and the source of ore material. It is established that the incoming zircon of different ages (570-3200 Ma), as well as two other geochronometers, rutile and monazite, underwent a thermal effect common for all varieties as a result of a hydrothermal process about 600 Ma ago. According to modern concepts, the closing temperature of the U-Pb system in rutile exceeds 500 °С, which suggests high-temperature conditions for the hydrothermal processing of rutile during the formation of the considered deposits in the Riphean.
-
Date submitted2022-01-28
-
Date accepted2022-04-26
-
Date published2022-07-26
On the presence of the postmagmatic stage of diamond formation in kimberlites
- Authors:
- Sergey K. Simakov
- Yuri B. Stegnitskiy
On nowadays multiphase and the facies heterogeneity of the formations are distinguished at the study of kimberlite pipes. Most researchers associate the formation of diamonds only with the mantle source. To date, satellite minerals with specific compositions associated with kimberlite diamonds have been identified as deep mantle diamond association. They are extracted from the concentrate of the kimberlites heavy fraction and may reflect the diamond grade of the pipe. For some minerals in the diamond association, however, they can not be reliable. Some researchers also revealed shallow diamond associations, related to the formation of serpentine, calcite, apatite, and phlogopite. There is recent data on the formation of diamonds in rocks of the oceanic crust. In the last years microdiamonds were identified in chromites of the oceanic crust in association with antigorite formed at 350-650 °C and 0.1-1.6 GPa. As a result, the authors established a postmagmatic kimberlitic stage of diamond formation associated with secondary mineral associations based on the experimental and mineralogical data for the conditions of the shallow upper mantle and crust. Mineralogical and petrographic studies of Angolan kimberlite pipe show that antigorite is the indicator mineral of this stage.
-
Date submitted2021-04-20
-
Date accepted2022-04-26
-
Date published2022-07-13
Prediction of the stress-strain state and stability of the front of tunnel face at the intersection of disturbed zones of the soil mass
The article presents a numerical solution of the spatial elastic-plastic problem of determining the stability of the tunnel face soils at the intersection of disturbed zones of the soil mass. The relevance of the study is related to the need to take into account the zones of disturbed soils when assessing the face stability to calculate the parameters of the support. Based on the finite element method implemented in the PLAXIS 3D software package, the construction of a finite element system "soil mass-disturbance-face support" and modeling of the intersection of the disturbed zones of the soil mass were performed. To assess the condition of soils, deformation and strength criteria are taken. The deformation criterion is expressed by the value of the calculated displacement of the tunnel contour in the face, and the strength criterion - by the safety coefficient until the maximum values of the stress state are reached according to the Coulomb–Mohr criterion. The results of the study are presented in the form of histograms of the safety coefficient dependences on the distance to the disturbance at different bending stiffness of the face support structure, as well as the isofields of deformation development. The parameters of rockfall formation in the face zone at the intersection of zones of disturbed soils were determined. The local decrease in strength and deformation properties in the rock mass along the tunnel track should be taken into account when assessing the stability of the tunnel face and calculating the parameters of the support. Within the framework of the constructed closed system, a qualitative agreement of the simulation results with the case of a collapse in the face during the construction of the Vladimirskaya-2 station of the St. Petersburg Metro was obtained.
-
Date submitted2020-12-11
-
Date accepted2021-03-30
-
Date published2021-06-24
Development of new compositions for dust control in the mining and mineral transportation industry
Dust control in summer and winter periods is a topical problem associated with conducting open pit mining operations; however, at negative temperatures the additional requirements are imposed on dust suppressants. Preventive compositions are proposed, in which light and heavy gas oils, obtained from catalytic cracking and delayed coking, are used as base components. Involvement of heavy fractions allows to increase the flash point, thereby reducing the flammability of dust suppressant, improve its adhesion properties by increasing the content of polyaromatic hydrocarbons and reduce the cost of the final product. In order to improve low-temperature and adsorption properties of developed dust suppressants, heavy oil residues (cracking residue and tar) are included in their composition in various concentrations: 2-10 wt.%. Alternative compositions of dust suppressants, obtained by water emulsification of vinylated alkyd oligomer, are developed; the ability of this dispersion to form strong films on dusty surfaces is examined. The efficiency of using aqueous solution of vinylated alkyd oligomer as a summer dust suppressant is demonstrated. The results of this study include the development of new preventive compositions with improved low-temperature properties and confirmation of the theoretical part of the study by the results of performance tests on a laboratory facility.Alternative compositions of dust suppressors have been developed, which were obtained by emulsifying a vinyl alkyd oligomer (VAO) in water; the ability of this dispersion to form strong films on dusty surfaces has been studied. The efficiency of using an aqueous solution of vinyl alkyd oligomer in the summer period as a dust suppressant is shown. The results of this study are the development of new prophylactic formulations with improved low-temperature properties and confirmation of the theoretical part of the study by the results of tests of operational characteristics in a laboratory facility.
-
Date submitted2020-06-23
-
Date accepted2021-03-02
-
Date published2021-04-26
Automated digitization of radial charts
Radial charts were commonly used in the industry to allow retrospective assessment of technological parameters. Today it is relevant to digitize the obtained data in order to simplify the automation of technological processes. Digitization of radial charts by means of standard methods is carried out with the help of human labor at significant time costs. The article proposes an automated method for digitizing radial charts using software, developed in the LabVIEW programming environment. The results of processing radial charts are displayed on the screen in numerical and graphical form, and can also be exported to a file (for example, to Notepad or MS Excel). The presented technique can be applied to images obtained on a color or black-and-white scanner, which minimizes geometric distortions, associated with the conversion of a paper document into electronic form, and ensures recognition quality of the clear plot line with an average relative error of up to 3 %. In case of ink fading or perspective photos of the diagram, the value of relative error can reach 8 %, as a result of which additional manual correction of the data will be required.
-
Date submitted2020-10-22
-
Date accepted2021-03-02
-
Date published2021-04-26
Dynamic simulation of industrial-scale gibbsite crystallization circuit
- Authors:
- Vladimir O. Golubev
- Tatyana E. Litvinova
Population balance model is crucial for improving the method of aluminum hydroxide massive crystallization and enhancing the quality of control over industrial precipitation trains. This paper presents the updated population balance model, which can be used for simulation of industrial-scale precipitation. Processes of birth-and-spread and particle breakage are considered integral parts of the precipitation process along with secondary nucleation, growth and agglomeration of particles. The conceptual difference of the proposed system of equations is its ability to reproduce the oscillatory process that occurs in precipitation circuits as a result of cyclic changes in the quality of the seed surface. It is demonstrated that self-oscillations can occur in the system without any external influence. The updated model is adjusted and verified using historical industrial data. The simulation of seed-recycle precipitation circuit showed an exact correspondence between the calculated dynamic pattern of changes in particle size distribution of aluminum hydroxide and the actual data.
-
Date submitted2020-06-15
-
Date accepted2020-06-15
-
Date published2020-06-30
Multi-terminal dc grid overall control with modular multilevel converters
This paper presents a control philosophy for multiterminal DC grids, which are embedded in the main AC grid. DC transmission lines maintain higher power flow at longer distances compared with AC lines. The voltage losses are also much lower. DC power transmission is good option for Russian north. Arctic seashore regions of Russia don't have well developed electrical infrastructure therefore power line lengths are significant there. Considering above it is possible to use DC grids for supply mining enterprises in Arctic regions (offshore drilling platforms for example). Three different control layers are presented in an hierarchical way: local, primary and secondary. This whole control strategy is verified in a scaled three-nodes DC grid. In one of these nodes, a modular multilevel converter (MMC) is implemented (five sub-modules per arm). A novel model-based optimization method to control AC and circulating currents is discussed. In the remaining nodes, three-level voltage source converters (VSC) are installed. For their local controllers, a new variant for classical PI controllers are used, which allow to adapt the values of the PI parameters with respect to the measured variables. Concerning the primary control, droop control technique has been chosen. Regarding secondary level, a new power flow technique is suggested. Unbalance conditions are also verified in order to show the robustness of the whole control strategy.
-
Date submitted2019-06-22
-
Date accepted2019-09-11
-
Date published2020-04-24
Effective capacity building by empowerment teaching in the field of occupational safety and health management in mining
The paper is dealing with a developed concept named Empowerment Teaching, which is based on practical teaching experience gained in various mining universities. It is demonstrated that this concept can be used to increase the effectiveness of knowledge transfer to mining countries in the world, as well as to overcome cultural barriers between lecturers and their students. The two models of participatory training, which are proposed to be named “physical” and “emotional” models, are portrayed. The authors are convinced that participatory training methods can be an ideal answer to a challenge associated with workers’ competencies in mining, namely – the potential of highly motivated and well-educated young academics is often diminished by a lack of ability to apply their knowledge. A special emphasis is made on the possible application of empowerment teaching for educational and training activities in the field of occupational safety and health (OSH), which is a matter of utmost importance for the mining industry. Several benchmarking initiatives in the field of OSH (“safety culture”, zero-accident vision) are underlined to be encouraged and promoted by means of new teaching methods. The examples of successful international cooperation among universities are given, as well.
-
Date submitted2019-03-31
-
Date accepted2019-08-25
-
Date published2020-02-25
Cascade frequency converters control features
The structures of systems with high-voltage cascade frequency converters containing multi-winding transformers and low-voltage low-power converters connected in series at each output phase of the load are considered. Low-voltage blocks contain three-phase diode or active rectifiers, DC capacitor filters, single-phase stand-alone voltage inverters and block disconnecting devices in partial modes (in case of failure when part of the blocks are disconnected). The possibilities of operation of cascade converters are determined, equations for correcting tasks to units in partial modes are given, tables of correction of tasks with estimates of achievable load characteristics are proposed. The results of experiments on the model of a powerful installation with a cascade frequency converter are presented, confirming the possibility of ensuring the symmetry of the load currents when disconnecting part of the blocks and the asymmetry of the circuit.
-
Date submitted2019-07-07
-
Date accepted2019-09-13
-
Date published2019-12-24
Installation for experimental research of multiphase electromechanical systems
- Authors:
- V. M. Tereshkin
- D. A. Grishin
- I. A. Makulov
The subject of this study is an installation for experimental research designed to study the characteristics and control algorithms of multiphase motors with the number of working phases from 3 to 8, connected by a star, a triangle, or in another way, allowing phase currents to flow, creating a rotating electromagnetic field. The installation consists of two separate independent units: a controller, or a human-machine control interface, and a power inverter module (converter). The controller is connected to the converter by a two-wire half-duplex interface (RS485) via the Modbus RTU communication protocol. The installation also includes synchronous motors with the number of phases 3, 5, 7. Using the developed installation for experimental research, it is possible to carry out experimental studies of multiphase motors when implementing various control algorithms for a converter that implements pulse-width vector modulation. The time required to implement control algorithms is minimal. According to the results of the experiments, it is possible to carry out a comparative analysis of multiphase motors in terms of energy efficiency, in terms of vibration of electromagnetic origin, in dynamic parameters. An experimental assessment of the load of the converter keys is possible. The created installation is an effective tool for checking the reliability of the results of theoretical studies of electromechanical systems based on multiphase motors.
-
Date submitted2019-03-05
-
Date accepted2019-05-03
-
Date published2019-08-23
Efficiency Estimation of the Single- and Multicomponent Anti-hydrate Reagents
- Authors:
- N. A. Shostak
- E. P. Zaporozhets
Different types of technological and technical problems in the oil, gas and chemical industries are connected with the hydrate formation process and with the using of anti-hydrate chemicals. That is why, it is necessary to estimate thermobaric ranges within which reagents does not let hydrate to grow or is their dissociation. Also, to estimate anti-hydrate influence we need to determine the chemicals’ anti-hydrate efficiency and chose the best one. They make the reagents consisting of several chemical components depending on the purpose of their application – for prevention of formation and (or) elimination of hydrates. It demands calculations of the optimum concentration and expenses and also the intensity (speed) of hydrates dissociation causing with the reagents. The analytical method of the anti-hydrate chemical reagents efficiency determination containing one or several components from different classes of chemical compounds – alcohols, salts, acids, compounds of nitrogen and oxygen – is presented in this paper. With its help it is possible to define decrease in temperature of hydrate formation from reagents influence, to count key parameters of reagents anti-hydrate efficiency depending on component compositions of hydrate gas and a phase condition of a hydrate-gas system, to select types of chemical components and their quantity in multicomponent reagents, i.e., to make new compounds. The method can be used for express assessment of anti-hydrate chemical reagents efficiency on criteria sign for practical application in oil, gas and processing industry.
-
Date submitted2018-07-12
-
Date accepted2018-09-09
-
Date published2018-12-21
Application of the theory of wavelets for compression and filtration of geoinformation
- Authors:
- A. S. Yarmolenko
- O. V. Skobenko
The purpose of the article is to develop a detailed and accessible technology for the application of wavelets in the processing of geo-information, the subject of research is wavelet-based filtering and compression of geo-information. The research methodology is based on the modern theory of wavelets in the light of linear algebra. Research methods involve study and generalization, abstraction, formalization, mathematical modeling using computer programs compiled by the authors. After the introduction and formulation of the problem, the basic positions of linear algebra are presented, on which the content of the article is based when constructing orthonormal bases in one- and two-dimensional cases. First, the application of the general theory to the decomposition of the vector of initial data in the Haar and Shannon bases is given. Further, on the basis of the Haar basis, orthonormal bases of wavelet transforms and filtering information are constructed. The procedure for creating wavelet filters by a sequence of convolutions, the use of MSA analysis for constructing an orthonormal basis of the wavelet transform is considered. Implemented the practical possibility of wavelet filtering based on specific programs for modeling geo-information data fields and images, data compression and filtering. The result of the work is the methods of constructing orthonormal bases by various methods of wavelet transform, based on which algorithms and corresponding computer programs for geoinformation compression are compiled using the example of terrain and photographic images. The efficiency of geoinformation compression and noise filtering using wavelets was investigated. A method has been developed for determining the value of a filter depending on the accuracy of the initial geo-information, illustrated by the example of calculating the filter value for compressing information about the heights of the terrain. The same technique is recommended for image filtering.
-
Date submitted2018-01-14
-
Date accepted2018-03-12
-
Date published2018-06-22
Peculiarities of kinematics of rock mass shear during development of subseismic-scale faults
- Authors:
- A. V. Merzlikin
- L. N. Zakharova
The article describes the mechanism of formation and development of subseismic-scale faults in sedimentary rock mass based on results of physical and mathematical simulation. Physical modelling of layered rock massif was carried out by using sand-gypsum mixture. The results of physical modeling made it possible to visually evaluate the process of formation and development of subseismic-scale faults, to establish the orientation and amplitude of the modeled faults. It was established that faults with higher amplitude had filler material formed because of friction of fault edges/walls. The volume of modelled formation after formation of faults depending on fault amplitudes changed from 2-3 to 10 %. To gain information on stress deformed condition of rock massif and identification of key peculiarities of fault propagation dynamics we used the mathematical modeling based on particle-flow algorithm. The results of mathematical modeling determined that during formation of low amplitude faults the shear field has several rock clusters. Due to interaction of clusters, which have coordinated movement and promote massif loosening, the rock mass accumulates voids, which are the prerequisite for formation of subseismic-scale faults. The gained results enable to specify the complex mechanism of irreversible shears and deformations of rock mass during formation and development of subseismic-scale faults. It contributes to the improvement of the methodology for predicting the SSF parameters, which is of practical importance in terms of reducing mining risks.
-
Date submitted2017-08-26
-
Date accepted2017-11-10
-
Date published2018-02-22
On enhancement of cooperation between universities for implementation of the program «Sustainable development–2030»
- Authors:
- P. Ochirbat
- B. Chinzorig
The article is focused on one of the pressing issues of our time – the international training of qualified personnel in higher education institutions with the aim of developing a stable economic system of the state, the main elements of which are interrelated stages of economic activity (exploration, prospecting, extraction, processing, and use of mineral resources). The question of the contribution and role of universities of different countries cooperating in the sphere of sustainable development of this sector is considered. The necessity of practical solution of this task for the implementation of UNESCO's program «Sustainable Development – 2030» is determined. In this relation, the concept of «sustainable development», its philosophical, scientific-theoretical and cultural aspects are considered, the special significance of the connection between the sustainable development of society and its individual fragments with modern education is emphasized. It is stated that education, in the context of sustainable development, should be anticipating, advancing and open. Given the current trends in higher education, it is possible to mention the work carried out by the Mining Institute of the Mongolian State University of Science and Technology in the direction of international cooperation.
-
Date submitted2016-11-23
-
Date accepted2016-12-28
-
Date published2017-04-14
BIM technology and experience of their introduction into educational process for training bachelor students of major 08.03.01 «Construction»
- Authors:
- L. A. Goldobina
- P. S. Orlov
The article deals with issues of necessity of training and development of working staff for construction industry of Russian Federation for creation of competitive construction industry, meeting the high quality and efficiency standards, working in basis of modern financial and economic, technical and management mechanisms. One of the ways to solve this task of innovative development is modernization of architectural and building design, in particular implementation of BIM technology enabling making efficient decisions at all stages of building and structures life cycle – from investment concept till operation and even demolition. In relation to this the industry demands highly qualified workers and engineers (bachelor students) being able not only to get new knowledge but to use them for solving practical tasks of modern construction industry and market. The article present a concept of designing educational programme for training students with major 08.03.01 «Construction» (bachelor degree) focusing on systematized knowledge, skills and tools for training, in particular, through interconnection and continuity during course and diploma papers based on BIM technology.
-
Date submitted2016-11-07
-
Date accepted2016-12-27
-
Date published2017-04-14
Method of determining characteristics for air heating system in railway tunnels in harsh climatic conditions
- Authors:
- S. G. Gendler
- S. V. Sinyavina
The article describes climatic and mining-technical conditions influencing frost formation process. It was noted that the radical tools for preventing frost formation in winter periods is creation of positive temperature in tunnels by heating the incoming outside air. We formulated tasks, which solution will promote development of engineering calculation method for heating systems parameters. The article provides results of theoretical studies based on mathematical modelling and analytical solutions and data on field instrumental measurements, which were processed with similarity criteria. It compares mathematical modelling results on determining amount of tunnel incoming air flow with portal gates and calculations data from experimentally determined coefficient of local resistance. We proved the energy efficiency of placing the tunnel portal gates and validated the places of preheated air injection points and removal of cool air from this flow, which provides maximal energy effect.
-
Date submitted2015-12-01
-
Date accepted2016-02-29
-
Date published2016-12-23
Simulation of diesel engine energy conversion processes
- Authors:
- A. S. Afanasev
- A. A. Tretyakov
In order to keep diesel engines in good working order the troubleshooting methods shall be improved. For their further improvement by parameters of associated processes a need has arisen to develop a diesel engine troubleshooting method based on time parameters of operating cycle. For such method to be developed a computational experiment involving simulation of diesel engine energy conversion processes has been carried out. The simulation was based on the basic mathematical model of reciprocating internal combustion engines, representing a closed system of equations and relationships. The said model has been supplemented with the engine torque dynamics taking into account the current values of in-cylinder processes with different amounts of fuel injected, including zero feed. The torque values obtained by the in-cylinder pressure conversion does not account for mechanical losses, which is why the base simulation program has been supplemented with calculations for the friction and pumping forces. In order to determine the indicator diagram of idle cylinder a transition to zero fuel feed mode and exclusion of the combustion process from calculation have been provisioned.
-
Date submitted2015-10-11
-
Date accepted2015-12-13
-
Date published2016-08-22
The specifics of operating minor deposits (as given by the examples of gas condensate deposits of the Northern Caucasus)
- Authors:
- R. A. Gasumov
One of the most important directions in upgrading well productivity in the process of mining hydrocarbons consists in fighting with salt formation and salt deposition. Solving that problem becomes especially actual when operating deposits that are in their final stage of exploitation in complex mining and geological conditions accompanied by deposition of salts in the well foot area of oil bed and their sedimentation on the sub-surface and surface equipment. It provokes a drop in well productivity and results in off-schedule repair works. Specifics are considered of exploiting minor gas condensate deposits of the Northern Caucasus that are operated under complicated mining and geological conditions of anomalously high bed pressures, high temperatures, strong depressions on the beds and inflow of mineralized water from water saturated seams. Processes are studied of salt deposition from heavy hydrocarbons in the well foot and the bed area surrounding it. Water sample analyses data from different wells have demonstrated that the main salts carrier is the associated water, and the principal sedimenting agents are corrosion products, as confirmed by the results of microscopic studies. The dynamics is presented of salt deposition in the “well foot – wellhead – separator” system retrieved from the results of studies of reaction products in the well foot zone of oil bed. It is demonstrated that the efficiency of struggling with salt deposition in the course of mining hydrocarbons depends on comprehensive approach to the problem, the principal thrust lying with prevention of such deposition. Possible ways are considered to prevent precipitation of ferric compounds in the course of operating gas condensate wells, a way is suggested to intensify gas inflow.
-
Date submitted2015-08-12
-
Date accepted2015-10-05
-
Date published2016-04-22
Energy efficient electromechanical systems of mining andtransport machines
- Authors:
- A. E. Kozyaruk
The problems of selecting the type and the structure of mining and transport machines elec-tromechanical control system, providing energy efficiency and performance. The conclusion about the most admissibility of variable frequency drives with induction motors and power semiconduc-tor converters was made. The methods and technical means of improving the energy efficiency of asynchronous electric motors due to the choice of increased power characteristics motors, design of special motor control algorithms and applying of semiconductor converters with active rectifi-ers, providing high power factor and improving of the electricity supply quality were reviewed. To improve the operational characteristics prompted use of diagnostic systems and residual life as-sessment of electrical equipment. Implementation of designs tied to the excavator-transport sector. The schemes of the excavator power drive, mining truck and implemented complex picture at coal mine are shown.
-
Date submitted2015-07-25
-
Date accepted2015-09-01
-
Date published2016-02-24
The phenomenon of isothermal transition of metastable aluminate solutions into the labile area and prospects of its industrial use
- Authors:
- V. N. Brichkin
- A. Kraslawski
The paper presents theoretically based requirements for the activation of synthetic gibbsite for maximum solubility of the activated product. The article describes the methodological foundations of gibbsite thermal activation and its effectiveness evaluation in terms of aluminate solutions decomposition. It is shown that to obtain high-saturation aluminate solutions, activation should provide generation of the reagent with highly-developed surface area, which is not identical to the structure of the deposited gibbsite. As a result of high-gradient thermal activation of synthetic gibbsite, it has been found that the targeted product develops predominantly an amorphous structure with a specific surface area up to 256 m2/ g, preserving its primary particle size. Activation products were investigated using modern methods of physical and chemical analysis. The experimental results confirmed the possibility of the activated product dissolution in the aluminate solution with a metastable compound and their spontaneous decomposition with aluminum hydroxide formation, characterized by high dispersion ability. It is shown, that a significant difference in kinetics and decomposition rates of solutions is connected with the use of a seed material with different particle size composition, which leads to the development of competing mechanisms, resulting in seed recrystallization, homogeneous and heterogeneous nucleation.
-
Date submitted2014-11-08
-
Date accepted2015-01-27
-
Date published2015-10-26
Geochemistry of ore-forming hydrothermal fluids of the World ocean
- Authors:
- C. M. Sudarikov
- M. V. Zmievskii
The most complete results of the study of hydrothermal ore-forming solutions geochemistry in the Russian and international expeditions to deep-sea hydrothermal fields of the world ocean are analyzed. Solutions of both high and low salinity with respect to seawater are formed in the discharge zone of fluids. Positive correlation of ore components with the chloride ion and negative one with the pH value may indicate the migration of components in acidic hydrothermal solutions in the form of chloride complexes. Hydrogen sulfide is associated with the significant positive correlation with metals, which indicates reducing conditions forming in ore-bearing hydrothermal solutions. This is confirmed by the close relationship of ore components with hydrogen. The transfer of metals mainly in the form of chloride complexes at high temperatures of the solution is confirmed by the results of our thermodynamic modeling. Methane is characterized by negative dependence on temperature and concentration of ore components, associated with positive dependence on pH and negative one on hydrogen sulfide. Each of the observed dependencies can testify against abiotic theory of income of methane in hydrothermal solutions. The following geochemical indicators are the most promising for the discovery of new ore deposits and the organization of geochemical monitoring during the development of already discovered fields: Eh, pH, Cl, Fe, Mn, H 2 S, CO 2 , H 2 and possibly CH 4 .
-
Date submitted2014-11-22
-
Date accepted2015-01-01
-
Date published2015-10-26
Theoretical and methodological bases of forming a program management system for integrated development of a region
- Authors:
- S. V. Fedoseev
- Sya Chzhan
This article deals with theoretical and methodological bases of forming a program manage-ment system for integrated development of a region. The idea of a program-based management system based on a system of socio-economic transformation is presented. The given bases include monitoring emerging trends in the program management for integrated development of a region of the Russian Federation on basic parameters and involve control of the management process. The concept of forming the mechanism of program management as an integrated system is suggested.
-
Date submitted2014-10-20
-
Date accepted2014-12-24
-
Date published2015-08-25
Improving the technology of open-cast mining using surface miners and spreaders
- Authors:
- A. Yu. Cheban
The article is devoted to the issues of improving the efficiency of open-cast mining of solid minerals. Surface miners are effective and promising mining equipment that brought a large number of innovative technological solutions to the mining industry. The flow sheet of mining an overburden bench of high altitude with boom surface miners and the improved spreader is presented. Application of technical and technological improvements will significantly increase the productivity of mining equipment, reduce the cost of doing stripping operations and improve the profitability of the mining industry in the development of deposits of solid minerals, semi-indurated rocks.