Submit an Article
Become a reviewer

Search articles for by keywords:
geotechnical engineering feature

Geotechnical Engineering and Engineering Geology
  • Date submitted
    2023-08-02
  • Date accepted
    2023-12-27
  • Date published
    2024-04-25

Justification of the approaches to improve management strategy of the mining system based on the analysis of data on the mining of complex structural rock blocks

Article preview

Long-term activity of mining enterprises causes the necessity to substantiate the strategies of management of the mining and technical system functioning in terms of improvement of ore quality control, which is determined by its change in the course of field development due to the priority development of the main reserves and, as a consequence, forced transition to the mining of complex structural rock blocks with a decrease in the recovery percentage, which is typical in case the ore component meets the requirements of the feasibility study in terms of grade at substandard capacity. In this case, it is possible to identify the recovery percentage and the potential for its increase by analyzing the long-term activity of the mining and industrial enterprise, namely, by analyzing the data of mining complex structural rock blocks with the subsequent establishment of the relationship between the primary data on mining and geological conditions and information on the quality of the mineral obtained from the technological equipment. Therefore, the purpose of the research was to substantiate the necessity of improving the management strategy of the mining-technical system functioning, which consists in the fact that on the basis of analyzing the mining data of complex structural rock blocks it is possible to determine the ore mass losses and their quantity and to lay the basis for the development of decisions on its extraction. For this purpose, the collected data on the mining of complex structural rock blocks, accounting the geological and industrial type of extracted ores, were considered in modeling the conditions and studying the parameters of technological processes, the implementation of which provides additional products. It was revealed that the ore mass from substandard thickness layers is delivered to the dumps, and ore mass losses have been estimated at 25-40 % per year. It is proved that determination of ore mass losses based on the analysis of data on mining of complex structural rock blocks, as well as timely solution of this issue can significantly increase the production efficiency of mining and technical system. Taking into account for the results obtained, the options for optimizing the production of the mining and engineering system were proposed.

How to cite: Tsupkina M.V., Kirkov A.E., Klebanov D.A., Radchenko D.N. Justification of the approaches to improve management strategy of the mining system based on the analysis of data on the mining of complex structural rock blocks // Journal of Mining Institute. 2024. Vol. 266 . p. 316-325. EDN JOLUPJ
Geotechnical Engineering and Engineering Geology
  • Date submitted
    2023-07-04
  • Date accepted
    2023-09-20
  • Date published
    2023-10-27

Structure maintenance experience and the need to control the soils thermal regime in permafrost areas

Article preview

The risks of reducing the stability of buildings and structures are increasing in conditions of climate change and the active development of the territories under the influence of natural and anthropogenic factors. The main causes include: loss of the bearing capacity of frozen soils, various geocryological processes, errors at the stages of design, construction and operation of facilities. Main actual task when conducting research and industrial operations in the cryolithozone is monitoring and, if necessary, managing thermal processes in the permafrost layers interacting with facilities. In this article the obtained positive experience of various technologies applying at various stages of the life cycle of civil and industrial facilities was analyzed. It helps to eliminate or prevent the structure deformation or destruction under the influence of climate change. The methods of permafrost stabilization used in the oil and gas industry in process of industrial infrastructure development of the fields have been studied – freezing (cooling) of foundation soils during construction on heterogeneous foundations. The solution to the problems of minimizing accidents when locating production wells in the permafrost zone of the Yamal Peninsula is considered using the example of an oil and gas condensate field and restoring of the temperature regime of perennial unfrozen soils in areas of valve units of main gas pipelines. An assessment of methods used to maintain the industrial and residential infrastructure within the northern municipalities that ensure the functioning of the fuel and energy complex of the Russian Federation in the Arctic was made. The systems of thermal stabilization in the foundations of buildings and industrial facilities built and operated on permafrost soils allow to fully use the high strength and low deformability of frozen grounds. It ensures the state's long-term plans of the industrial development in the Arctic.

How to cite: Brushkov A.V., Alekseev A.G., Badina S.V., Drozdov D.S., Dubrovin V.A., Zhdaneev O.V., Zheleznyak M.N., Melnikov V.P., Okunev S.N., Osokin A.B., Ostarkov N.A., Sadurtinov M.R., Sergeev D.O., Fedorov R.Y., Frolov K.N. Structure maintenance experience and the need to control the soils thermal regime in permafrost areas // Journal of Mining Institute. 2023. Vol. 263 . p. 742-756. EDN IMQTQY
Geotechnical Engineering and Engineering Geology
  • Date submitted
    2022-04-03
  • Date accepted
    2023-03-02
  • Date published
    2023-12-25

Specifics of geotechnical risk control in the design of underground structures

Article preview

The underground space development is associated with the emergence of complex and dangerous situations, often leading to accidents. The condition for their development is the potential geotechnical risks. High-quality execution and analysis of design work at all the stages of design, starting from the early stages, is one of the effective ways to control risks. Clarification of the characteristics and features of the rock mass adjacent to the projected underground structure makes it possible to identify the potential cause of the occurrence of an adverse event with a certain probability during the construction and operation of an underground structure. The purpose of a qualitative risk analysis is to identify risk factors in underground construction. The value of the total geotechnical risk, expressed by the sum of each of the possible risks, should be numerically estimated at the design stage of a specific underground facility. At the same time, it is extremely important to develop a methodology for managing geotechnical risks, which would make it possible to assess their probability of development at an early stage of project preparation and propose measures to reduce or prevent them. This technique is given in the article. The results of the study conducted in accordance with the presented methodology showed that geotechnical risk control proved an effective method in preventing accidents during underground construction.

How to cite: Kulikova E.Y., Polyankin A.G., Potokina A.M. Specifics of geotechnical risk control in the design of underground structures // Journal of Mining Institute. 2023. Vol. 264 . p. 895-905. EDN DGEAGK
Geotechnical Engineering and Engineering Geology
  • Date submitted
    2021-10-08
  • Date accepted
    2022-01-24
  • Date published
    2022-04-29

Methodology for thermal desorption treatment of local soil pollution by oil products at the facilities of the mineral resource industry

Article preview

The analysis of the main environmental consequences of leaks and local spills of petroleum products at the enterprises of the mineral resource complex is presented. It is established that the problem of soil contamination with petroleum products at the facilities of the mineral resource complex and enterprises of other industries is caused by significant volumes of consumption of the main types of oil products. Based on the results of the author's previous field research, a series of experiments was carried out, consisting in modeling artificial soil pollution with petroleum products such as gasoline, diesel fuel, highly refined oil, motor oil, and transmission oil, followed by their purification by heat treatment at temperatures of 150, 200, and 250 °C. The 250 °C limit of the heating temperature was set due to the need to partially preserve the structure and quality of the soil after heat treatment to preserve its fertility. When the processing temperature rises to 450 °C, all humates are completely burned out and, as a result, productivity is lost. Confirmation is provided by the results of experiments to determine the humus content in uncontaminated soil and soil treated at different temperatures. It was found that at a maximum processing temperature of 250 °C, about 50 % of the initial organic carbon content is preserved. According to the results of the conducted experimental studies, the dependences of the required processing temperature on the concentration of petroleum products to reduce the concentration of petroleum products to an acceptable level have been established. The methodology of thermal desorption cleaning of soils with varying degrees of contamination at enterprises of the mineral resource complex is presented.

How to cite: Pashkevich M.A., Bykova M.V. Methodology for thermal desorption treatment of local soil pollution by oil products at the facilities of the mineral resource industry // Journal of Mining Institute. 2022. Vol. 253 . p. 49-60. DOI: 10.31897/PMI.2022.6
Geoeconomics and Management
  • Date submitted
    2021-02-05
  • Date accepted
    2021-03-30
  • Date published
    2021-04-26

Assessment of negative infrastructural externalities when determining the land value

Article preview

The work forms and substantiates the concept of land value, based on a new institutional theory. The infrastructural component of the cost of land in the presented concept determines, on the one hand, the efficiency of the use of natural resources, properties, demand for land on the market, on the other hand, the costs, which are determined not only by capital investments in construction of engineering infrastructure, but also by losses associated with restrictions on activities within zones with special conditions for territory use, creation of unfavorable conditions for economic activity, small contours, irregularities and others on a specific land plot, which are external negative infrastructural externalities that create losses of rights holders of land plots that are not compensated by the market, falling within the boundaries of these zones. Methods for assessing the impact of such negative infrastructural externalities on the cost of land encumbered by zones in different conditions of land market activity have been developed and tested, based on an expert-analytical approach (depressed market); the ratio of market values of land plots encumbered and unencumbered by a specific zone, and qualimetric modeling (inactive market); modeling by introducing into the model the factor of presence of zones with special conditions for territory use, based on the grouping of zones according to similar regulations for use, or by introducing the parameters of this factor (active market). Methods for taking into account spatial deficiencies and compensating for restrictions and prohibitions on activities on the territory of land plots with an individual market assessment are proposed.

How to cite: Bykova E.N. Assessment of negative infrastructural externalities when determining the land value // Journal of Mining Institute. 2021. Vol. 247 . p. 154-170. DOI: 10.31897/PMI.2021.1.16
Geoeconomics and Management
  • Date submitted
    2019-09-29
  • Date accepted
    2020-02-24
  • Date published
    2020-04-24

Vs sustainable development: scenarios for the future

Article preview

Issues of sustainable development began to concern mankind starting from the 20th century, when mass industrialization and the depletion of natural resource potential contributed to the formulation of environmental issues at one of the leading places in scientific discourse. However, what if the goals of sustainable development would not be achieved to 2030? What other way we can identify for humanity to survive? So, the study is about the problems of studying the understanding of the term “sustainable development”, considering the evolution of the formation of the concept of sustainable development and analyzing the modern goals of sustainable development for attainability. From an analysis of domestic and foreign experience, possible scenarios of the development of mankind are identified (such as 1. Creating an environmental framework, 2. Implementation of sustainable nature management practices in the conditions of natural and man-made objects, 3. Implementation of “geoengineering projects”, 4. Construction of autonomous ecosystems, 5. Space exploration in search of a new planet for life, provided that the goals of sustainable development would not be achieved. It has been established that today probability of achieving all the sustainable development goals by 2030 is too small, and the indicated scenarios require, firstly, the development of science and technology, and secondly, a competent assessment of the value of nature and solving the issue of specifying property rights for natural goods.

How to cite: Yurak V.V., Dushin A.V., Mochalova L.A. Vs sustainable development: scenarios for the future // Journal of Mining Institute. 2020. Vol. 242 . p. 242-247. DOI: 10.31897/PMI.2020.2.242
Mining
  • Date submitted
    2019-03-25
  • Date accepted
    2019-05-23
  • Date published
    2019-08-23

Assessment of Rock-Burst Hazard in Deep Layer Mining at Nikolayevskoye Field

Article preview

The paper presents results of conducted research using regional and local methods of forecast and control over geomechanical state of the rock mass at burst-hazardous Nikolayevskoye field, located in a geodynamically active region. The study subject is the ore mass of Nikolayevskoye field, characterized by man-induced and tectonic disturbances and high geodynamic activity. The aim of research was practical implementation of methods and instruments of forecast and control over geomechanical state of the burst-hazardous rock mass and safety improvement of mining operations. Exploitation practice of burst-hazardous fields demonstrates that forecast accuracy of hazardous rock pressure demands cutting-edge multi-level systems, where local methods and tools complement regional ones. A regional forecast of rock-burst hazard at Nikolayevskoye field was performed by means of seismoacoustic method using automated control system for rock pressure (ACSRP) «Prognoz-АDS». Local forecast was carried out using «Prognoz-L» device, geophysical (sample disking) method and visual observations of dynamic pressure manifestations in the mining tunnels. Quality assessment of stress-strain and burst state of the rock mass was performed using specialized software «PRESS 3D URAL». Integration of engineering and geomechanical data in the process of conducting research guarantees a relevant assessment of rock-burst hazard in various areas of the field at various stages of its development. Practical verification of the system, where local methods and tools complement regional ones, demonstrated satisfactory results at Nikolayevskoye mining plant, which makes it recommendable for other mining facilities extracting ore at great depths under similar conditions of active geodynamic processes.

How to cite: Sidorov D.V., Potapchuk M.I., Sidlyar A.V., Kursakin G.A. Assessment of Rock-Burst Hazard in Deep Layer Mining at Nikolayevskoye Field // Journal of Mining Institute. 2019. Vol. 238 . p. 392-398. DOI: 10.31897/PMI.2019.4.392
Electromechanics and mechanical engineering
  • Date submitted
    2017-10-25
  • Date accepted
    2018-01-17
  • Date published
    2018-04-24

Innovative technology of large-size products manufacture

Article preview

Advantages and prospects for the use of mobile robotic machine-tools in the manufacture of large parts in the mining, cement and nuclear industries are considered, as well as the importance of using welded structures to reduce production costs. Schemes for finishing mechanical machining of welded large-sized parts such as bodies of revolution with the use of mobile robotic machine-tools equipped with a belt-grinding tool, an enlarged description of the technological process for manufacturing a large-sized shell of a welded structure are presented. The conclusion is made that it is necessary to take into consideration the use in the industry of frameless production technology, especially for the machining of large-sized parts, and the use of small mobile robotic machine-tools is a productive approach and has a prospective character. The technological approaches proposed in the article make it possible to remove the restriction on the overall size and mass of the parts being manufactured, which are proposed to be manufactured directly at the site of future operation. The effectiveness of this technology is confirmed both by theoretical research and by practical data of the authors. It was noted that the production by the domestic machine-tool industry of mobile universal and special robotic machine-tools will allow the country's engineering industry to be brought to a new, high-quality world level.

How to cite: Sanin S.N., Pelipenko N.A. Innovative technology of large-size products manufacture // Journal of Mining Institute. 2018. Vol. 230 . p. 185-189. DOI: 10.25515/PMI.2018.2.185
Electromechanics and mechanical engineering
  • Date submitted
    2017-11-17
  • Date accepted
    2018-01-05
  • Date published
    2018-04-24

Estimation of the relation of strength and ultrasound speed in glass-reinforce plastic

Article preview

In mining machinery, details and products made of composite materials are widely used, especially from GRP (glass-reinforce plastic). The work evaluates the relationship between the strength and the speed of ultrasound for nondestructive testing of strength in an article made of composite materials such as GDR with the use of a pulsed ultrasonic method. Methods for estimating the connection, the method of mechanical compression tests and mathematical processing and establishing the relationship between the ultrasonic velocity and the strength of GRP are considered. The results of experimental studies on establishing the relationship between the strength of GRP on compression and the speed of longitudinal ultrasonic waves are presented. As a result of statistical processing of the experimental results, equations of the relationship between the compressive strength and the ultrasonic velocity in fiberglass are obtained.

How to cite: Potapov A.I. Estimation of the relation of strength and ultrasound speed in glass-reinforce plastic // Journal of Mining Institute. 2018. Vol. 230 . p. 176-184. DOI: 10.25515/PMI.2018.2.176
Metallurgy and concentration
  • Date submitted
    2016-10-27
  • Date accepted
    2017-01-02
  • Date published
    2017-04-14

Chemistry as a basis for solving environmental issues

Article preview

The article summarizes over 40 years of authors’ experience in the field of physical chemistry and chemical technology of glassy state of materials. It is shown that environmental issues are caused not by Chemistry as a science but by actions of ecologically illiterate humans using its advances. It is noted that without chemistry humankind cannot live comfortably and solve existing environmental problems. In support these facts we describe several developments made by authors of this article in energy industry, high temperature machinery, glass production technology, glassy phosphate fertilizers, production of non-waste systems and complex research of physical-chemical principles of glassy oil sorbents production of organic and non-organic nature.

How to cite: Kogan V.E., Shakhparonova T.S. Chemistry as a basis for solving environmental issues // Journal of Mining Institute. 2017. Vol. 224 . p. 223-228. DOI: 10.18454/PMI.2017.2.223
Mining
  • Date submitted
    2016-09-22
  • Date accepted
    2016-11-14
  • Date published
    2017-02-22

Technological problems and fundamental principles of methods of engineering-geocryological exploration during construction and exploitation of wells in permafrost rock mass

Article preview

The article describes peculiarities and complicating factors when constructing wells in cryolithic zones. It also presents fundamental principles of methods of pilot parametric drilling for complex exploration of engineering-geocryological conditions of multiple-well gas production platforms. The article describes peculiarities of geophysical examinations within the complex of parametric drilling for clarification and correlation of log sheet, and identifying non-commercial gas reservoirs and interpermafrost head oil-filed water horizons in permafrost rock mass. We defined main ecological issues of parametric drilling and presented potential environment pollutants from well drilling in cryolithic zones. It concludes a list of factors, which should be considered during gas well drilling in northern zones for meeting the «safety – sustainability – low waste» criteria.

How to cite: Cherkai Z.N., Gridina E.B. Technological problems and fundamental principles of methods of engineering-geocryological exploration during construction and exploitation of wells in permafrost rock mass // Journal of Mining Institute. 2017. Vol. 223 . p. 82-85. DOI: 10.18454/PMI.2017.1.82
Electromechanics and mechanical engineering
  • Date submitted
    2015-12-10
  • Date accepted
    2016-02-18
  • Date published
    2016-12-23

Engineering and technical measures to improve reliability of power supply to construction facilities

Article preview

The paper examines an issue of ensuring reliable power supply to construction facilities, proposes ways to reduce losses in distribution networks and improve power supply reliability. The primary focus is on increasing the transmission capability of power distribution networks and improving power supply reliability and safety of single-phase electricity consumers. Engineering and technical proposal belongs to the field of electrical engineering and in particular concerns power supply to single-phase consumers from three-phase networks, including construction industry consumers, and can be used in three-phase three-, four- and five-wives alternating current power distribution networks.

How to cite: Orlov P.S. Engineering and technical measures to improve reliability of power supply to construction facilities // Journal of Mining Institute. 2016. Vol. 222 . p. 845-851. DOI: 10.18454/PMI.2016.6.845
Mining education: traditions and perspectives in the XXI century
  • Date submitted
    2014-12-17
  • Date accepted
    2015-03-01
  • Date published
    2015-12-25

Freiberg mining academy and russia: 250 years of business cooperation

Article preview

The article is dedicated to the 250th anniversary of Freiberg Mining Academy, the oldest European higher technical education institution with the mining specialization. It is an established fact that the roots of cooperation between Russian and German mining en-gineers go back to the time of Peter the Great, and which was later maintained as exemplified by the Demidovs, the dynasty of leading Russian metallurgical works owners. In terms of science, a signifi-cant contribution was made both by leading mining science experts of Freiberg and by their disciple M.V.Lomonosov, a great Russian scientist. The article focuses on the links between the Mining Academy and St Petersburg Mining School, which was founded a little later and became the first higher technical education institution in Russia. It gives numerous examples of professional de-velopment of Russian mining specialists who had practical training in Freiberg. The conclusion reviews the relations between the two education institutions over the last decades and identifies their prospects.

How to cite: Afanasev V.G. Freiberg mining academy and russia: 250 years of business cooperation // Journal of Mining Institute. 2015. Vol. 216 . p. 131-137.
Mining education: traditions and perspectives in the XXI century
  • Date submitted
    2014-12-24
  • Date accepted
    2015-02-11
  • Date published
    2015-12-25

Freiberg mining academy and Mining cadet corps: their place and role in Humboldt´s life and activities

Article preview

The article examines the stages and events of Humboldt s life, associated with the European institutions: Freiberg Mining Academy and the Mining Cadet Corps in St Petersburg. It establishes the fact that his training at the former, in particular, his acquaintance with V.Y.Sojymonov, con-tributed to the beginning of his connection with the Mining Cadet Corps. A notable event in Hum-boldt s life, which helped to establish and further develop those contacts, was his trip to the Urals and Siberia, where he met and worked with alumni and staff of the Mining Cadet Corps – P.P.Anosov, E.K.Hoffman, D.S.Menshenin, and G.P.Gelmersen. A number of Humboldt’s arti-cles, published in a scientific journal of the Corps «The Mining Journal», testify to those meetings. The article provides a conclusion, which is of great current interest, in connection with the anniversaries: 250 th anniversary of Freiberg Mining Academy; 240 th anniversary of the Mining Cadet Corps (nowadays – the National Mineral Resources University «The Mining University»), and 190 th anniversary of «The Mining Journal», - that those two core European educational institu-tions with the mining and geological specialization, in close and productive interaction played a key role in Humboldt’s life and professional activity.

How to cite: Rebeshchenkova I.G. Freiberg mining academy and Mining cadet corps: their place and role in Humboldt´s life and activities // Journal of Mining Institute. 2015. Vol. 216 . p. 138-146.
Geology
  • Date submitted
    2014-11-29
  • Date accepted
    2015-01-09
  • Date published
    2015-10-26

G.V.Bogomolov and his role in development of national hydrogeology

Article preview

In March 2015 the scientific community celebrated the 110th anniversary of the birth of one of the founders of the hydrogeological and engineering-geological school, an honouree of State Award of the USSR and the Byelorussian SSR, Academician Gerasim Vasilyevich Bogomolov. The article is devoted to several important stages of the development of Russian hydrogeology, which are primarily associated with the research conducted by G.V.Bogomolov. His role in the development of hydrogeology in Belarus, i.e. theory and practice of the use of groundwater, is emphasized. This article is about the man who was a brilliant geologist, scholar, lecturer and an outstanding research manager. G.V.Bogomolov founded a school of disciples and followers who continued to develop and put into practice the academician’s ideas in various branches of geological theory and practice.

How to cite: Ustyugov D.L., Norova L.P. G.V.Bogomolov and his role in development of national hydrogeology // Journal of Mining Institute. 2015. Vol. 215 . p. 16-24.
Geology
  • Date submitted
    2014-06-24
  • Date accepted
    2014-08-31
  • Date published
    2014-12-22

Unique engineering and technology for drilling boreholes in Antarctic ice

Article preview

As the result of many years of research into the processes of the transfer of ice as a rock mass on a global scale, concerning the Antarctic ice sheet at the ultra-deep 5G borehole, a discovery has been made that is of international significance in the areas of glaciology and geodynamics. Those who created the theory of thermal and mechanical penetration into ice and loose sediments have developed unique technology and engineering processes in order to drill boreholes using thermal and mechanical methods.

How to cite: Litvinenko V.S. Unique engineering and technology for drilling boreholes in Antarctic ice // Journal of Mining Institute. 2014. Vol. 210 . p. 5-10.
Geology and geophsics
  • Date submitted
    2010-07-06
  • Date accepted
    2010-09-25
  • Date published
    2011-03-21

Engineering-geological characteristics quaternary-neogene deposits coal fields Кuzbass for surface mining

Article preview

Opencast mining in the Kuzbass is carried out using gidromehanizatsionnyh technologies that are the most progressive and effective ways to excavate in arrays composed of Neogene-Quaternary deposits. In addition, hydromechanization a single indissoluble chain processes that integrate development, transportation and stacking of disturbed rocks in special facilities – gidrootvaly. Basic technological processes hydromechanization include: the destruction of rock massifs hydro, dredges and non-pressure streams of water pressure or free-flow hydraulic transport; gidrootvaloobrazovanie.

How to cite: Kuznetsova I.V. Engineering-geological characteristics quaternary-neogene deposits coal fields Кuzbass for surface mining // Journal of Mining Institute. 2011. Vol. 189 . p. 46-49.
Philosophy and history of science, culture and education
  • Date submitted
    2009-09-20
  • Date accepted
    2009-11-29
  • Date published
    2010-06-25

Some facts of history of training and employment of mining engineers during 20-30th years of 20th century

Article preview

The article is dedicated to the problem of training mining engineers during the most difficult Soviet period. The problem was solved with foundation of new educational institution as well as reorganization of functional ones primarily Mining Institute. Reformation of universities was justified sometimes not. Disadvantage of reformation was repression to highly qualified specialists of mining. Personnel problem was solved that allowed to increase coal and oil extraction.

How to cite: Afanasev V.G. Some facts of history of training and employment of mining engineers during 20-30th years of 20th century // Journal of Mining Institute. 2010. Vol. 187 . p. 160-164.
Applied and fundamental research in physics and mathematics
  • Date submitted
    2009-09-05
  • Date accepted
    2009-11-17
  • Date published
    2010-06-25

Photoelectric method of hydrogen detection

Article preview

The new photoelectric method of the detection of hydrogen is proposed, based on strong dependence of the photo induced current on concentration of hydrogen in III-V heterostructures with Pd contact. The given influence at a room temperature is stronger on few orders than influence of hydrogen on electric characteristics of solid-state elements in existing sensors. The original design of portable sensor module was developed on the base of photosensitive element and infrared light-emitting diode that meet demands of hydrogen power engineering.

How to cite: Stoyanova T.V., Salikhov K.M., Kalinina K.V., Stoyanov N.D. Photoelectric method of hydrogen detection // Journal of Mining Institute. 2010. Vol. 187 . p. 132-136.
Philosophy and history of science, culture and education
  • Date submitted
    2009-09-23
  • Date accepted
    2009-11-28
  • Date published
    2010-06-25

The notions of engineering thinking, the technical picture, the worldview of engineer’s

Article preview

The notions of engineering thinking, the technical picture of the world, the engineer’s worldview and their forming in the process of modern education of engineers are studied.

How to cite: Pukshansky B.Y. The notions of engineering thinking, the technical picture, the worldview of engineer’s // Journal of Mining Institute. 2010. Vol. 187 . p. 198-201.
Geology
  • Date submitted
    2009-08-17
  • Date accepted
    2009-10-18
  • Date published
    2010-02-01

Geotechnical engineering and hydrogeological specifics of estimate high-rise buildings construction and operation conditions (in terms of local zone on the right bank of Neva river)

Article preview

In the paper specificity of geotechnical engineering conditions in the local zone of the right river Neva bank are considered. The influence of underground topographies of Pre-Quaternary soils roof formed by paleovalleys on the specificity of engineering geological profile is analyzed. Influence of tectonic faults on physical and mechanical properties of Upper Kotlin clays (Upper Vendian) which it is planned to use as the basis for high-rise constructions is considered. Negative influence of Low Kotlin (Upper Vendian) pressure water-bearing horizon on clay properties in the construction foundation and structural materials is investigated.

How to cite: Zhukova A.M. Geotechnical engineering and hydrogeological specifics of estimate high-rise buildings construction and operation conditions (in terms of local zone on the right bank of Neva river) // Journal of Mining Institute. 2010. Vol. 186 . p. 13-17.
Geology
  • Date submitted
    2009-08-03
  • Date accepted
    2009-10-30
  • Date published
    2010-02-01

Geotechnical engineering features of the estimation of stability of heavy constructions of designed cement works in Novorossiysk

Article preview

In the paper possibilities of constructing industrial heavy structures near slopes are described. The influence of tectonics, seismicity, a relief, deposit rocks thicknesses, their physical properties of geotechnical engineering feature are analyzed. The law of marls durability change is established. Positions of the most probable surfaces of sliding in cracked monoclonal deposit thickness are shown. The estimation of stability of the loaded slopes is made. Some recommendations for maintenance of structure stability are given.

How to cite: Khaliullina Y.V. Geotechnical engineering features of the estimation of stability of heavy constructions of designed cement works in Novorossiysk // Journal of Mining Institute. 2010. Vol. 186 . p. 41-45.
Geology
  • Date submitted
    2009-08-17
  • Date accepted
    2009-10-12
  • Date published
    2010-02-01

Complex geological engineering and geoenvironmental monitoring as a basis for creation of strategy of Saint Petersburg architectural and historical monuments conservation

Article preview

In the paper concept and structural of complex engineering geological and geoenvironmental monitoring of architectural and historical monuments are considered. The specificity of engineering geological and hydrogeological conditions by the example of the Isaac Cathedral, the Kazan Cathedral and the Peter and Paul Cathedral is analyzed. The geoenvironmental condition of architectural and historical monuments underground space is estimated. The factors which influence on monuments deformation due to the high degree of underground space transformation and activity of negative natural and technogenic processes are shown. The system of impact monitoring of the Isaac Cathedral, the Kazan Cathedral and the Peter and Paul Cathedral is proposed.

How to cite: Shidlovskaya A.V. Complex geological engineering and geoenvironmental monitoring as a basis for creation of strategy of Saint Petersburg architectural and historical monuments conservation // Journal of Mining Institute. 2010. Vol. 186 . p. 46-49.
Geology
  • Date submitted
    2009-08-19
  • Date accepted
    2009-10-02
  • Date published
    2010-02-01

The estimation features of vulnerability and desintegration оf subway construction materials in Saint Petersburg

Article preview

In this paper the features of subway construction materials degradation depending on engineering-geological, hydro-geological and geoecological conditions of Saint Petersburg underground space are considered. The basic types of subway construction placing and their destruction specificity depending on influence of water-bearing horizons hydrodynamic and hydro chemical conditions, natural and natural-technogenic gas bio-production and microbial activity are analyzed. The examples of the disintegrated materials and new growths (salt efflorescence, stalactites and others) chemical compound features depending on the content of ground waters basic components affecting on tunnels lining are resulted.

How to cite: Kotyukov P.V. The estimation features of vulnerability and desintegration оf subway construction materials in Saint Petersburg // Journal of Mining Institute. 2010. Vol. 186 . p. 22-26.
Problems in geomechanics of technologeneous rock mass
  • Date submitted
    2009-07-20
  • Date accepted
    2009-09-24
  • Date published
    2010-04-22

Methods for presetting of artificial yielding to anthracite pillars

Article preview

The article contains the results of in situ investigation of influence of yielding pillars on the stability of protected workings with different modes of preset yielding. Graphs of roof movements in the workings protected with yielding pillars, are given.

How to cite: Stradanchenko S.G., Titov N.V., Turuk Y.V. Methods for presetting of artificial yielding to anthracite pillars // Journal of Mining Institute. 2010. Vol. 185 . p. 158-160.