-
Date submitted2022-09-30
-
Date accepted2024-11-07
-
Date published2025-02-25
Carbon dioxide corrosion inhibitors: current state of research and development
Among the methods of corrosion control in the oil and gas production industry the leading place belongs to inhibitor protection, since there is no need for technological and technical changes in the existing equipment. The combination of high variability of inhibitor composition with changing conditions of its application and low capital investments makes it an indispensable reagent at oil and gas fields. The main classes of compounds used as active bases of carbonic acid corrosion inhibitors for the protection of oil and gas equipment are described. Classical organic active bases containing heteroatoms (oxygen, sulfur, nitrogen) are examined. Special attention was paid to alkylimidazolines and other nitrogen-containing compounds as the most frequently used as active bases of carbonic acid corrosion inhibitors in Russia and abroad. A wide range of possibilities to achieve the desired properties of corrosion inhibitors by varying the substitutes has been demonstrated. Nowadays, in addition to the traditional requirements for corrosion inhibitors, their safety for the environment is equally important. The information on prospective research and development aimed at improving the environmental characteristics of the reagents used is given. Plant extracts, synthetic and biological polymers involved in traditional corrosion inhibitors or used as new independent compounds are considered. It is shown that the effectiveness of corrosion inhibitors significantly depends on the pH of the medium, temperature, partial pressure of СО2, flow rate, and other factors.
-
Date submitted2021-12-20
-
Date accepted2024-05-02
-
Date published2024-08-26
A new formula for calculating the required thickness of the frozen wall based on the strength criterion
- Authors:
- Mikhail А. Semin
- Lev Yu. Levin
The study delves into the elastoplastic deformation of a frozen wall (FW) with an unrestricted advance height, initially articulated by S.S.Vyalov. It scrutinizes the stress and displacement fields within the FW induced by external loads across various boundary scenarios, notably focusing on the inception and propagation of a plastic deformation zone throughout the FW's thickness. This delineation of the plastic deformation zone aligns with the FW's state of equilibrium, for which S.S.Vyalov derived a formula for FW thickness based on the strength criterion. These findings serve as a pivotal launchpad for the shift from a one-dimensional (1D) to a two-dimensional (2D) exploration of FW system deformation with finite advance height. The numerical simulation of FW deformation employs FreeFEM++ software, adopting a 2D axisymmetric approach and exploring two design schemes with distinct boundary conditions at the FW cylinder's upper base. The initial scheme fixes both vertical and radial displacements at the upper base, while the latter applies a vertical load equivalent to the weight of overlying soil layers. Building upon the research outcomes, a refined version of S.S.Vyalov's formula emerges, integrating the Mohr – Coulomb strength criterion and introducing a novel parameter – the advance height. The study elucidates conditions across various soil layers wherein the ultimate advance height minimally impacts the calculated FW thickness. This enables the pragmatic utilization of S.S.Vyalov's classical formula for FW thickness computation, predicated on the strength criterion and assuming an unrestricted advance height.
-
Date submitted2022-03-01
-
Date accepted2022-05-25
-
Date published2022-12-29
Study on the rheological properties of barite-free drilling mud with high density
Improved drilling and reservoir penetration efficiency is directly related to the quality of the drilling mud used. The right choice of mud type and its components will preserve formation productivity, stability of the well walls and reduce the probability of other complications. Oil and gas operators use barite, less often siderite or hematite weighting agent as a weighting component in the composition of drilling muds for the conditions of increased pressure. But the use of these additives for the penetration of the productive formation leads to the reduction of filtration characteristics of the reservoir, as it is almost impossible to remove them from the pore channels. Therefore, barite-free drilling mud of increased density based on formic acid salts with the addition of carbonate weighting agent as an acid-soluble bridging agent is proposed. The results of experimental investigations on rheological parameters of barite-free solutions are given and the obtained data are analyzed. Based on the comparison of results it is recommended to use high-density drilling mud on the basis of formic acid salts (sodium and potassium formate) and with the addition of partially hydrolyzed polyacrylamide with molecular mass of 27 million.
-
Date submitted2022-05-17
-
Date accepted2022-09-06
-
Date published2022-11-03
Methodological substantiation of the choice for optimal modes of equipment operation during the stage-wise concentrate removal in iron ores beneficiation
- Authors:
- Alexandr S. Opalev
- Svetlana A. Alekseeva
The urgent task of improving the quality of iron ore concentrates was studied. We propose to use the stage-wise removal of the concentrate by combining fine screening, regrinding, and magnetic-gravity separation. Exemplified by magnetite ore from the Stoilensky GOK, a scientific and methodological approach to the search for optimal separation parameters and modes was substantiated. It includes several stages: studying the particle size distribution and release of useful components in the feed product to select classification parameters; a series of experiments on grinding oversize products to diverse sizes; beneficiation of the obtained products by MG separation. To select the optimal parameters of ore preparation, an analysis of the beneficiation efficiency was used, which is calculated according to the Hancock – Luyken criterion. The results of the research are experimental dependences that connect the process parameters of beneficiation with those of fine vibratory screening. For the studied ferruginous quartzite ore processed at the Stoilensky GOK, the obtained dependences can be described by a second-order polynomial with a high accuracy of approximation. The best performance is achieved with a particle size of 0.1 mm: Fe tot content in the concentrate is 69.7 %, recovery is 85 %, classification efficiency is 80.4 %. The top size of the product in this case is 0.076 mm, which corresponds to 70-73 % grinding size of –0.045 class.
-
Date submitted2022-04-20
-
Date accepted2022-07-21
-
Date published2022-11-03
Iron ore beneficiation technologies in Russia and ways to improve their efficiency
- Authors:
- Aleksei E. Pelevin
Increasing the efficiency of crushing circuits is associated with a decrease in the particle size of finely crushed ore and the use of dry magnetic separation of crushed ore. Reducing grinding costs is achieved by using drum mills jointly with mills of other designs. The use of automation systems, slurry demagnetization, technologies with staged concentrate separation, and beneficiation and fine screening in a closed grinding cycle lead to a reduction in grinding costs. The main industrial technology for improving the quality of concentrate is its additional beneficiation using regrinding, fine screening, flotation, and magnetic-gravity separators. Increasing the integrated use of iron ore raw materials is associated with an increase in the yield of iron concentrate and the production of hematite concentrate during the beneficiation of hematite-magnetite ores and ilmenite concentrate during the beneficiation of titanomagnetite ores. Incremented concentrate yield is possible by using magnetic separators with an increased magnetic induction up to 0.25-0.5 T in the first stages of beneficiation. To obtain hematite and ilmenite concentrates, combined technologies can be used, including fine screening, high-gradient magnetic, gravity, flotation, and electrical separation.
-
Date submitted2022-02-22
-
Date accepted2022-05-11
-
Date published2022-11-03
Scientific substantiation and development of innovative processes for the extraction of zirconium and rare earth elements in the deep and comprehensive treatment of eudialyte concentrate
- Authors:
- Valentin A. Chanturiya
Based on a package of modern analysis methods, the influence of various acids and energy effects on the morphology, elemental composition, structural and chemical transformations of the mineral surface, and the efficiency of eudialyte concentrate leaching was studied. The mechanism and the optimal conditions and specific features of the destruction of eudialyte and rock minerals and the extraction of zirconium and REE under the influence of various acids, powerful nanosecond pulses, dielectric barrier discharge, electrochemical processing, mechanochemical activation and ultrasound were revealed. The mechanism of formation and the optimal conditions for the dispersion of silica gel, depending on the methods and parameters of energy effects, was theoretically and experimentally substantiated. A combined three-stage circuit of nitric acid leaching of eudialyte concentrate with ultrasonic treatment of the suspension, providing 97.1 % extraction of zirconium and 94.5 % REE, were scientifically substantiated and tested. The conditions for the selective deposition of zirconium and REE were theoretically and experimentally substantiated.
-
Date submitted2022-02-22
-
Date accepted2022-09-15
-
Date published2022-11-10
The problem of the genesis of the Mesoarchean aluminosilicate rocks from the Karelian craton and their possible use as a quartz-feldspar raw material
The article presents original data obtained in the study of the chemical and mineral compositions of the Late Archean aluminosilicate rocks (formerly called silicites) from the Koikari and Elmus structures of the Vedlozero-Segozero greenstone belt of the Karelian craton (Central Karelia). A comprehensive study of these formations revealed their complex genesis as a result of the late imposition of hydrothermal and metamorphic alteration on sedimentary and volcanic-sedimentary rocks of feldspar-quartz composition. Due to the superimposed metasomatic (temperature?) impact on feldspar-quartz siltstones, Fe was removed from microinclusions in quartz and feldspar and its oxides were concentrated along the grain boundaries. Minerals such as monazite, parisite, allanite are also located either along the grain boundaries of quartz and feldspars, or together with calcite they fill microfractures, which makes it possible to get rid of them when preparing quartz-feldspar concentrates using various beneficiation technologies. According to most indicators limited by GOSTs, individual samples in their natural form meet the requirements for quartz-feldspar raw materials for use as part of batch in the production of diverse types of glass. Additional beneficiation of the feedstock (grinding, screening into narrow classes and further magnetic separation) leads to a decrease in Fe 2 O 3 content to normalized values. The resulting quartz-feldspar concentrates with various particle sizes can be used in the production of building material and fine ceramics (sanitary and ceramic products, facing and finishing tiles, artistic, household porcelain and faience). The homogeneity of the mineral and chemical composition, the possibility of compact extraction and beneficiation (including in mobile small-sized installations) increase the prospects and competitiveness of this non-traditional feldspar raw material from Central Karelia.
-
Date submitted2022-04-04
-
Date accepted2022-05-13
-
Date published2022-07-13
Distribution of trace elements controlled by sector and growth zonings in zircon from a miaskite pegmatite of the Vishnegorsky massif, the Southern Urals
Data on the content and distribution of trace and rare-earth elements (SIMS method) in sectors and growth zones of a large zircon crystal from miaskite pegmatites of the Vishnegogorsky massif are presented. The morphology of the zircon crystal is a combination of a dipyramid {111} and prism {010}. It has been established that the growth sector of dipyramid {111} is characterized by almost one order of magnitude higher contents of Y, Nb, REE, Th; higher Th/U and Eu/Eu* values; REE distribution spectra are flatter compared to prism {010} growth sector. A regular decrease in the content of trace and rare-earth elements in the direction from the central zone to the marginal zone of crystal growth was revealed. A smooth regression of zircon crystallization temperature of zircon from 960 °C in the central zone to 740 °C in the marginal zone of the dipyramid sector and 700-650 °C in the prism sector has been revealed, which may be a reflection of thermal evolution of the crystallization process. It is assumed that crystallization of the central zone of zircon occurred at early stages from a relatively trace-еlement-rich melt. The crystallization was completed at lower temperatures, probably, simultaneously with the formation of REE-concentrating minerals, which resulted in natural decrease of content of trace and rare-earth elements in the melt and, consequently, in zircon crystallizing from it.
-
Date submitted2021-06-08
-
Date accepted2021-11-30
-
Date published2021-12-27
Management of groundwater resources in transboundary territories (on the example of the Russian Federation and the Republic of Estonia)
Groundwater, as a source of water supply, the most important mineral and geopolitical resource, , is often the only source of high-quality drinking water that is protected from pollution under conditions of increasing deterioration of surface water quality. Transboundary groundwaters are the focus of hydrogeological researchers for a number of reasons, including the reduction and pollution of water resources as a result of economic activities. The increased controversy between states over transboundary water issues has necessitated the development of international legal documents on issues related to water conflict prevention and the sustainable use of fresh water. As part of the analysis of the problem of legal regulation of groundwater extraction from transboundary aquifers and complexes, it is proposed to consider this aspect on the example of Russia. The problems of regulation of rational use and protection of fresh water in the bilateral treaties of the Russian Federation were revealed; a methodology for the management of groundwater extraction in the territory of the transboundary aquifer was developed, the size, parameters, and factors influencing the formation of the transboundary zone have been determined (based on research and analysis of water intake activities in the border areas of the Russian Federation and the Republic of Estonia) were determined.
-
Date submitted2021-03-18
-
Date accepted2021-11-30
-
Date published2021-12-27
Deformations assessment during subway escalator tunnels construction by the method of artificial freezing of soil for the stage of ice wall formation
- Authors:
- Evgenii M. Volokhov
- Diana Z. Mukminova
The work is devoted to the study of the processes of displacement and deformation of the surface during the escalator tunnels construction of the subway by the method of artificial freezing of soils. The features of the construction and freezing technology, the rocks characteristics in which the escalator tunnels made are considered. The data of specially organized, full-scale surveying observations of deformations on the earth surface are presented. The main factors influencing deformation processes in the frozen strata of a layered inhomogeneous rock mass with inclined tunneling are determined, the complexity of the predictive task and the need to simplify the design scheme are shown. The work is focused on the assessment of the least studied geomechanical processes of soil heaving-uplifts and deformations during the periods of active and passive freezing stages. When studying the displacements processes of the earth surface and rock mass, the finite element method and analysis of the obtained data using field observations of displacements were used. A simplified calculation scheme is proposed for modeling, which allows taking into account the uneven influence of frozen rocks of an inhomogeneous layered rock mass with a large inclined tunneling. The satisfactory convergence of the data of field surveying observations on the earth surface and the results of modeling geomechanical processes for the period of active and passive freezing stages is shown. The proposed calculation scheme is recommended for the prediction of deformation at the stages of underground construction, characterized by the development of the most dangerous tensile deformations of buildings and structures on the surface.
-
Date submitted2020-05-16
-
Date accepted2021-03-02
-
Date published2021-04-26
Study of drive currents for lifting bridge cranes of metallurgical enterprises for early diagnosis of load excess weight
The article discusses an approach based on the analysis of the drive motor currents to create an additional means of protection against emergency situations during the operation of bridge cranes associated with lifting a load with a mass exceeding the permissible one . A mathematical model of an overhead crane drive is described, as well as the results of computer simulation. It is shown that in the process of lifting up, before the stage of lifting the load, the stator current of the drive electric motor does not depend of the load mass, but when the load is detached, already for several periods of the mains voltage after the rope is pulled, when the mass of the load is exceeded, a measurable excess of the amplitude value of the current is recorded. This pattern has been confirmed for a number of cranes of various lifting capacities used at metallurgical enterprises. The possibility of diagnosing excess weight of the lifted load with a higher speed than existing mechanical methods of overload control is demonstrated, at the same time it is not required to make changes to the structural elements of overhead cranes.
-
Date submitted2020-01-27
-
Date accepted2020-05-22
-
Date published2020-10-08
Sorption of rare earth coordination compounds
Rare earth elements (REEs) are valuable and strategically important in many high-technology areas, such as laser technology, pharmacy and metallurgy. The main methods of REE recovery are precipitation, extraction and sorption, in particular ion exchange using various sorbents, which allow to perform selective recovery and removal of associated components, as well as to separate rare earth metals with similar chemical properties. The paper examines recovery of ytterbium in the form of coordination compounds with Trilon B on weakly basic anion exchange resin D-403 from nitrate solutions. In order to estimate thermodynamic sorption parameters of ytterbium anionic complexes, ion exchange process was carried out from model solutions under constant ionic strength specified by NaNO 3 , optimal liquid to solid ratio, pH level, temperatures 298 and 343 K by variable concentrations method. Description of thermodynamic equilibrium was made using mass action law formulated for ion exchange equation and mathematically converted to linear form. Values of equilibrium constants, Gibbs free energy, enthalpy and entropy of the sorption process have been calculated. Basing on calculated values of Gibbs energy, a sorption series of complex REE ions with Trilon B was obtained over anion exchange resin D-403 from nitrate solutions at temperature 298 K. Sorption characteristics of anion exchange resin have been estimated: total capacity, limiting sorption of complex ions, total dynamic capacity and breakthrough dynamic capacity.
-
Date submitted2020-05-26
-
Date accepted2020-06-10
-
Date published2020-06-30
Theoretical analysis of frozen wall dynamics during transition to ice holding stage
Series of calculations for the artificial freezing of the rock mass during construction of mineshafts for the conditions of a potash mine in development was carried out. Numerical solution was obtained through the finite element method using ANSYS software package. Numerical dependencies of frozen wall thickness on time in the ice growing stage and ice holding stage are obtained for two layers of the rock mass with different thermophysical properties. External and internal ice wall boundaries were calculated in two ways: by the actual freezing temperature of pore water and by the temperature of –8 °С, at which laboratory measurements of frozen rocks' strength were carried out. Normal operation mode of the freezing station, as well as the emergency mode, associated with the failure of one of the freezing columns, are considered. Dependence of a decrease in frozen wall thickness in the ice holding stage on the duration of the ice growing stage was studied. It was determined that in emergency operation mode of the freezing system, frozen wall thickness by the –8 °C isotherm can decrease by more than 1.5 m. In this case frozen wall thickness by the isotherm of actual freezing of water almost always maintains positive dynamics. It is shown that when analyzing frozen wall thickness using the isotherm of actual freezing of pore water, it is not possible to assess the danger of emergency situations associated with the failure of freezing columns.
-
Date submitted2020-01-09
-
Date accepted2020-01-17
-
Date published2020-02-25
Methodology for Calculating the Stability of the Polymer Operating String in Permafrost
- Authors:
- V. A. Stetukha
- I. I. Zheleznyak
The goal of this paper is to develop a methodology for calculating the stability of an annular cross-section string casing made of polymer material used for the development of mineral deposits by underground leaching in permafrost formations. The aim was to determine the geometric parameters of the casing and to ensure its operational reliability. The relevance of the research is associated with the peculiarities of external influences on the string, for example, a geotechnological well operating in permafrost formation under conditions of additional exposure to ice pressure during freezing of water in the borehole annulus. This effect is usually accompanied by deformation of the casing due to ice pressure, which can lead to string collapse, abnormal operation and the risk of contamination of the geological environment. The proposed calculation method for a polymer casing is based on simulation of objects using the finite element method. We used the spatial finite elements to model the interaction of key elements of the geotechnological natural-technogenic complex: a polymer casing, ice in the annulus space and homogeneous or heterogeneous rock masses adjacent to the well. The results of the study are presented in the form of tables and patterns of displacements, which reflect stresses and strains in the elements of the calculation scheme. The analysis of the obtained results confirms the possibility of using polymer casings of different technological purposes in various conditions of permafrost formation, including extreme ones. The results of the redistribution of pressure created by ice during the freezing of water in the borehole annulus to the rock mass and the string are evaluated. Interdependent deformations of the rock mass and operating string during freezing of water in the borehole annulus are determined. The necessity of considering the properties of the rock mass in determining the pressure on the string is established. The conditions for the collapse of the string with a different combination of its parameters are revealed.
-
Date submitted2019-07-24
-
Date accepted2019-09-13
-
Date published2019-12-24
Integrated mining projects in underdeveloped territories of Russia: substantiation of implementation parameters
- Authors:
- T. V. Ponomarenko
- E. A. Khan-Tsai
- Ch. Bavuu
Complex mining projects, as a rule, have significant economic and social impact on the territory, sometimes entire regions where they are implemented. Consumers of their implementation effects are population, government, buyers, lenders and other stakeholders. Therefore, development of transport infrastructure in integrated projects for development of mineral deposits should have state support, forms of which are very diverse. In Russia parameters of concession agreements for construction of transport infrastructure, carried out in conjunction with projects for development of mineral deposits, are not regulated or justified. Aim of the work is to develop an organizational model and justify parameters of concession agreement for construction of the railway as a key element of transport infrastructure necessary for successful implementation of the project for development of a large coal deposit in a low-developed region. Research methods are: strategic, institutional, investment analysis, modeling and forecasting methods. The article proposes an approach to justification of technical, economic and financial parameters of concession agreement implemented during realization of an integrated mining project. As a result of the study, a concession agreement model was developed for construction of railway section as part of an integrated mining project, including development of a deposit and construction of a mining and concentrating company.
-
Date submitted2019-01-11
-
Date accepted2019-03-17
-
Date published2019-06-25
Improving methods of frozen wall state prediction for mine shafts under construction using distributed temperature measurements in test wells
- Authors:
- L. Yu. Levin
- M. A. Semin
- O. S. Parshakov
Development of mineral deposits under complex geological and hydrogeological conditions is often associated with the need to utilize specific approaches to mine shaft construction. The most reliable and universally applicable method of shaft sinking is artificial rock freezing – creation of a frozen wall around the designed mine shaft. Protected by this artificial construction, further mining operations take place. Notably, mining operations are permitted only after a closed-loop frozen section of specified thickness is formed. Beside that, on-line monitoring over the state of frozen rock mass must be organized. The practice of mine construction under complex hydrogeological conditions by means of artificial freezing demonstrates that modern technologies of point-by-point and distributed temperature measurements in test wells do not detect actual frozen wall parameters. Neither do current theoretical models and calculation methods of rock mass thermal behavior under artificial freezing provide an adequate forecast of frozen wall characteristics, if the input data has poor accuracy. The study proposes a monitoring system, which combines test measurements and theoretical calculations of frozen wall parameters. This approach allows to compare experimentally obtained and theoretically calculated rock mass temperatures in test wells and to assess the difference. Basing on this temperature difference, parameters of the mathematical model get adjusted by stating an inverse Stefan problem, its regularization and subsequent numerical solution.
-
Date submitted2018-08-29
-
Date accepted2018-10-25
-
Date published2019-02-22
The study of the effect of temperature on the ability of metals to accumulate energy during their plastic deformation
The subject of research is the surface layer of highly loaded parts, friction units of mining machines and equipment. The article presents a theoretical analysis of the factors that determine the ability of the material of the surface layer of parts to accumulate energy in the process of plastic deformation. It is suggested that the activation character of the accumulation of energy by metals. Based on the theory of diffusion, it was shown that the mobility of atoms, as well as the accumulated energy, are determined by the ratio of the test temperature to the melting temperature.
-
Date submitted2015-10-18
-
Date accepted2015-12-01
-
Date published2016-08-22
Effect of surface geometry and insolation on temperature profile of green roof in Saint-Petersburg environment
- Authors:
- S. A. Ignatev
- D. S. Kessel
The paper addresses an issue of creating an environment favorable for the life in megacities by planting vegetation on the rooftops. It also provides information about rooftop greening practices adopted in other countries. The issues of ‘green roof’ building in climatic conditions of Saint Petersburg and roof vegetation impact on the urban ecosystem are examined. Vegetation composition quality- and quantity-wise has been proposed for the roof under research and a 3D model of this roof reflecting its geometric properties has been developed. A structure of roof covering and substrate qualitative composition is presented. An effect of rooftop geometry on the substrate temperature is explored. The annual substrate temperature and moisture content in different parts of the roof have been analyzed. Results of thermal imaging monitoring and insolation modelling for different parts of green roof surface are presented.
-
Date submitted2015-10-23
-
Date accepted2015-12-19
-
Date published2016-08-22
Nondestructive techniques to control the quality and quantity of oil flows
- Authors:
- R. M. Proskuryakov
- A. V. Kopteva
The article considers the issue of improving the efficiency of exploiting the acting oil fields and transportation system on the basis of modern hi-tech technologies to control the extracted and transported material. Factors are studied that lower the reliability of oil flow measurements, both qualitatively and quantitatively, the main ambiguities are described of using current systems for metrological account of oil transported through the pipelines. The effect is studied of inclusions in the transported oil flow on measurement efficiency. A technique is suggested for selective measurements of separate phases in the complex multi-phase flows with isotropic radio emission, the principal relationships are presented to describe the intensity of direct and scattered gamma-radiation on flow parameters. Criteria are given for developing a measurement system that would control the actual component composition of the flow with time, hence the amount of oil transported; that would enable organizing a centralized open department to control the quality of oil and transportation conditions, upgrade the level of production and provide high measurement accuracy. Results are presented of testing the technique on an operating oil field; the relative error margin of measuring free gas content was 0.2 %. The range is reviewed of possible applications for the measurement system of multi-phase multi-component flows, developed in the Saint Petersburg Mining University.
-
Date submitted2015-08-23
-
Date accepted2015-10-26
-
Date published2016-04-22
Low-voltage electrical apparatus
- Authors:
- S. M. Apollonskii
- Yu. V. Kuklev
The article describes the main trends in the development of low-voltage electrical appliances and related accessories, as well as issues of efficiency, reliability and safety. According to the authors, the main trends in the development of low-voltage apparatus can be considered: the transition from the use of certain devices to the system devices, unified by the process of installation and running in standard modules and comply with all the functional requirements of control systems; improving the standardization and normalization of the EA on an international scale; unification of constructive elements of the EA; increase the volume of production of complete device management and contactless application logic control systems and specialized computers for management purposes; increase the proportion of contactor relay equipment DC, performs a variety of control functions. Improved security service low voltage, through the use of low voltage (24 V DC, 110 V AC), voltage presence signaling devices; increase the proportion of and the use of combined control and protection devices as well as devices for the automation of recruitment and duty cycles of machines: differentsequencer, track control devices, relays, pulse counting, and so on. n.
-
Date submitted2014-12-29
-
Date accepted2015-02-15
-
Date published2015-12-25
A study of distillates physical and chemical properties and residues after thermodestructive and catalytic processes and their application in the mining industry
- Authors:
- N. K. Kondrasheva
- O. V. Zyrianova
When transporting overburden rocks in a cold season, the lower layer of materials freezes to working surfaces of transport equipment, and at long transportations – congeals under its own weight. As a result, up to 50 % of rock remains in the vehicle, while the unloaded part represents indiscreete frozen mass. It considerably complicates the process of unloading transport and leads to increased labor and financial expenses. A rational and effective remedy for these problems is transport equipment and bulk material processing with chemical agents of oil and petrochemical origin – mixtures of distillate and bottom frations obtained as a result of thermodestructive processes during petroleum feedstock manufacturing. The article presents data on the quality of distillates and residual products of oil recycling, which are used as initial components for producing preventive drugs, which are used to prevent sticking and freezing of overburden rocks during transportation and storage in the cold time of year, as well as drugs used for pit roads treatment in surface mining operations. Optimal component compositions of new petrochemicals are developed, and the physical and chemical properties of the received test samples have been studied.
-
Date submitted2014-11-19
-
Date accepted2015-01-12
-
Date published2015-10-26
Scientific heritage of academician Nikolay Semenovich Kurnakov
- Authors:
- O. A. Dubovikov
Once N.V.Lipin, a professor of mathematics at the Leningrad Mining Institute, told N.S.Kurnakov that M.V.Lomonosov had complained about his lack of familiarity with mathematics. The outstanding scientist replied «That’s absolutely true, and I have already told you about it: we all need mathematics, and the more chemistry develops, the more it needs a mathematical justification». According to one scenario of the international nongovernmental organization, the Club of Rome, there will be a three-fold decrease in the world’s raw materials resources and multifold volume reduction in industrial production by the middle of the 21st century. Another scenario claims that raw materials will reduce only by one third, and the volume of industrial production will remain at the level of the beginning of the century. Not only the first scenario, but also the second one forecasts industrial stagnation. It is unacceptable for dynamic and sustainable development of the technological civilization. Intensively developing economies in China, India, Brazil and Russia defy the forecast of the Club of Rome, as it has not taken into account the possibility of scientific and technological progress in reducing energy consumption and using alternative sources, as well as the increased technological potential of the humanity. Due to depletion of the main sources of energy (oil and gas), many experts link the future of the world’s power industry with the possible use of solid energy resources. From the environmental point of view solid fuel gasification technology is the most preferable. As the calorific value of producer gas is relatively low in comparison with natural gas, some research of possible use of producer gas (as an alternative to natural gas which is available not in all regions) at Russian industrial enterprises has been conducted.
-
Date submitted2014-10-04
-
Date accepted2014-12-26
-
Date published2015-08-25
Conservation of municipal solid waste landfills for landfill gas utilization
- Authors:
- M. A. Pashkevich
- T. A. Petrova
The assessment of existing technologies for storage and utilization of domestic solid waste in Russia and other countries is conducted. The regions of landfill sites for household waste disposal are investigated. The results of field observations of the quality of air, surface water and ground-water are given. The method of effective isolation of a landfill surface using polymer materials is proposed. The technological process of landfill surface covering with the help of a selfpropelled screening machine is described. This method allows organizing centralized biogas utilization from landfills, improves the environmental situation in the regions of their location, reduces air pollution and practically eliminates spontaneous combustion of waste.
-
Date submitted2014-10-15
-
Date accepted2014-12-30
-
Date published2015-08-25
Method of controlling the temperature field on the basis of the Green's function
- Authors:
- Yu. V. Ilyushin
- I. M. Pershin
At the present stage of development of automatic control systems raises the question of maintaining the set temperature objects. The authors developed MetO-wild synthesis of nonlinear regulators to stabilize the temperature field, a uniform object of management on the basis of a given error. We obtained a function of the initial heating and the mathematical modeling of the process, analyzed the results. By creating a regulator there has been designed software and hardware programming language Pascal, which allows to simulate the behavior of temperature fields in an isotropic web. It is a simulation of the temperature of the system in different configurations: with different amounts of pulsed heating sources with relay control principle. Practical results of the research suggest the possibility of constructing silicon carbide heating element made in the form of an isotropic core.
-
Date submitted2013-07-20
-
Date accepted2013-09-20
-
Date published2014-03-17
Interchamber pillars partial working off technology at the floor-and-chamber system of development of the Korobkovsky deposit of KMA
- Authors:
- E. I. Boguslavskii
- M. N. Andreev
Article is devoted to a choice of rational technology of mining of part of stocks interchamber pillars at floor-and-chamber system of development of the Korobkovsky deposit of KMA. Authors carried out calculations and comparison of technical and economic parameters of two offered technologies of mining: horizontal layers with a stowing in an ascending order with application of a portable equipment and horizontal layers with a stowing in an ascending order with a driving of autobiases in interpanel pillars. For a choice of method of development for mining of part of interchamber pillar and determination of its parameters and indicators.