-
Date submitted2023-10-04
-
Date accepted2024-09-24
-
Date published2025-02-25
Crustal movement model in the ITRF2020 – a case study in Northern Vietnam
- Authors:
- Bui Thi Hong Tham
- Phi Truong Thanh
In the North area of Vietnam, the crustal movement velocity of 38 GNSS points belonging to different international Earth reference frames (ITRF2000, ITRF2005, ITRF2008) is adjusted to the international Earth reference frame ITRF2020. This is the latest frame up to now. Since then, the picture of crustal movement in the North area of Vietnam has been unified in a dynamic coordinate system. In the study area, the rate of crustal movement is about 35 mm/year, and the direction of displacement is from northwest to southeast. To build a model of the crustal movement of the Earth in the northern area of Vietnam, the movement velocity data of 38 stations in ITRF2020 is evaluated with high accuracy. All points are also satisfactory. And then, the crustal movement velocity model is built by using the collocation method in the form of the 3-order Markov function. Within 38 stations, 34 stations are used to build the model and 4 remaining stations are used as checked stations. The obtained results show that the Earth's crust movement velocity model has an accuracy of about 2 mm/year for movement velocity and 2 deg for movement direction. This is the first model of Earth's crust movement in the North of Vietnam that has been built in the latest dynamic coordinate system ITRF2020. These results have important significance in the research and practical application of the movement of the Earth's crust. The steps of building the movement velocity model in this study can be applied to other experimental areas in the territory of Vietnam.
-
Date submitted2023-10-29
-
Date accepted2024-04-08
-
Date published2025-02-25
Evaluation of the impact of the distance determination function on the results of optimization of the geographical placement of renewable energy sources-based generation using a metaheuristic algorithm
- Authors:
- Andrei M. Bramm
- Stanislav A. Eroshenko
Since the United Power System was created electrical supply of remote and hard-to-reach areas remains one of the topical issues for the power industry of Russia. Nowadays, usage of various renewable energy sources to supply electricity at remote areas has become feasible alternative to usage of diesel-based generation. It becomes more suitable with world decarbonization trends, the doctrine of energy security of Russia directives, and equipment cost decreasing for renewable energy sources-based power plants construction. Geological exploration is usually conducted at remote territories, where the centralized electrical supply can not be realized. Placement of large capacity renewable energy sources-based generation at the areas of geological expeditions looks perspective due to development of industrial clusters and residential consumers of electrical energy at those territories later on. Various metaheuristic methods are used to solve the task of optimal renewable energy sources-based generation geographical placement. The efficiency of metaheuristics depends on proper tuning of that methods hyperparameters, and high quality of big amount of meteorological and climatic data. The research of the effects of the calculation methods defining distance between agents of the algorithm on the optimization of renewable generation placement results is presented in this article. Two methods were studied: Euclidean distance and haversine distance. There were two cases considered to evaluate the effects of distance calculation method change. The first one was for a photovoltaic power plant with installed capacity of 45 MW placement at the Vagaiskii district of the Tyumen region. The second one was for a wind power plant with installed capacity of 25 MW at the Tungokochenskii district of the Trans-Baikal territory. The obtained results show low effects of distance calculation method change at average but the importance of its proper choose in case of wind power optimal placement, especially for local optima’s identification.
-
Date submitted2023-03-02
-
Date accepted2023-06-20
-
Date published2023-07-19
Improving the efficiency of autonomous electrical complex with renewable energy sources by means of adaptive regulation of its operating modes
Renewable energy sources are gradually becoming useful in mining industry. They are actively used in remote, sparsely populated areas to power shift settlements, geological and meteorological stations, pipeline equipment, mobile cell towers, helicopter pads lighting, etc. In comparison with diesel generators, systems with renewable sources do not require fuel transportation, have short payback periods and flexible configuration for different categories of electrical loads. The main obstacles to their spread are instability of generation and high cost of produced electricity. One of the possible ways to solve these problems is to develop new technologies, increase power density of generators and energy storage systems. The other way represents energy saving and rational use of affordable resources. The new solutions for implementation of the second method are proposed in this work. The object of the study is autonomous DC electrical complex with photovoltaic and wind power sources. In such systems the generated power from renewable sources is transferred to consumers via intermediate DC bus, the voltage level of which affects the power losses in the process of power transmission. The vast majority of complexes have a problem that their DC bus voltage is constant, while the optimum voltage level with lowest losses varies depending on the generated and consumed power. Therefore, electrical complexes potentially lose a part of the transmitted energy. To avoid this, a special algorithm was added to automatically adjust DC bus voltage to optimum level according to changes in working conditions. An additional contribution to efficiency improvement can be made by dynamic change of operating frequency in power converters depending on their load. The evaluation based on results of computer simulation showed that in a complex with rated power 10 kW active power losses during its lifetime can be reduced by 2-5 %.
-
Date submitted2022-05-12
-
Date accepted2022-09-15
-
Date published2022-12-29
Problem solution analysis on finding the velocity distribution for laminar flow of a non-linear viscous flushing fluid in the annular space of a well
- Authors:
- Vasiliy I. Nikitin
Modern drilling fluids are non-linear viscous media with an initial shear stress. In classical scientific works on hydromechanical modeling of drilling fluids motion in pipes and annular channels the Shvedov – Bingham approximation and Ostwald – de Waale power-law model were used, which did not fully account for behavior of technological fluids in a wide range of shear rates. This article presents a numerical solution for a mathematical model of drilling fluid motion of the three-parameter Herschel – Bulkley rheological model in the annular space of the well. The Herschel – Bulkley model in the rheological equation takes into account the presence of initial shear stress and a tendency for viscosity to change with shear rate, which distinguishes it from the Ostwald – de Waale and Shvedov – Bingham models. The target function in solving the equation of motion is the velocity distribution in the radial direction of the upward flow of the flushing fluid. The analysis of obtained solution is based on the theory of velocity profile influence on quality of cuttings removal during wellbore cleaning. Due to peculiarities of mathematical statement of the task, which supposes necessity of differential equation of motion solution, Wolfram Mathematica computational software has been used as a calculation tool. The analysis of numerical solution allowed to draw conclusions about the possibility of its application in evaluation of velocity profile when drilling fluid moves in annular space of the well. The possibility for application of modified excess coefficient as a relative quantitative parameter for evaluation of velocity profile uniformity was substantiated.
-
Date submitted2021-03-11
-
Date accepted2021-04-12
-
Date published2022-04-29
Operation mode selection algorithm development of a wind-diesel power plant supply complex
- Authors:
- Yaroslav E. Shklyarskiy
- Daria E. Batueva
The power supply system is affected by external disturbances, so it should be stable and operate normally in compliance with power quality standards. The power supply system goes into abnormal modes operation when, after a short-term failure or disturbance, it does not restore normal mode. The electrical complex, which includes a wind power plant, as well as a battery and a diesel generator connected in parallel, is able to provide reliable power supply to consumers which meets the power quality indicators. The article develops an algorithm that is implemented by an automatic control system to select the operating mode depending on climatic factors (wind) and the forecast of energy consumption for the day ahead. Forecast data is selected based on the choice of the methods, which will have the smallest forecast error. It is concluded that if the energy consumption forecast data is added to the automatic control system, then it will be possible to increase the efficiency of the power supply complex. In the developed algorithm the verification of normal and abnormal modes of operation is considered based on the stability theory. The criteria for assessing the normal mode of operation are identified, as well as the indicators of the object’s load schedules for assessing the load of power supply sources and the quality standards for power supply to consumers for ranking the load by priority under critical operating conditions and restoring normal operation are considered.
-
Date submitted2021-04-23
-
Date accepted2021-09-07
-
Date published2021-12-16
Development of the concept of an innovative laboratory installation for the study of dust-forming surfaces
Currently, the determination of the emission rate of suspended solids from a unit of the surface area of a man-made mass at various parameters of the wind flow is not sufficiently described. The analysis of the world experience of researchers shows that existing laboratory installations have various design features that do not allow to correctly determine the mass of the dust being flapped and wind-blown. Based on the analysis results, the concept of an innovative laboratory installation for the study of dust-forming surfaces has been developed. It takes into account the influence of wind shadows, the deturbulization of an artificially created air flow, the possibility of regulating not only the flow velocity mode, but also the creation of a vacuum or disturbance in the area of sample placement, as well as the formation of a certain angle of wind flow attack relative to the surface. The concept provides for the possibility of determining the volume of dust emissions by the values of the lost dust masses in the sample and by the values of dust concentrations in the outgoing stream. The calculation of the main basic elements of the installation using the ANSYS FLUENT software package was carried out. The model and configuration of the wind tunnel have been developed and calculated, the main geometric parameters and functional elements for the possibility of use in scientific work have been determined. For practical use of the empirical roughness value of the underlying surface, its values are recommended in a wide range – from zero for the water surface to 0.44 for large cities with tall buildings and skyscrapers.
-
Date submitted2021-01-25
-
Date accepted2021-02-22
-
Date published2021-04-26
Conducting industrial explosions near gas pipelines
The problem to ensure the safety of objects which are in the area of blasting operations, ensuring the destruction of hard rocks, remains relevant. The article presents the results of a large-scale experiment to determine the safe conditions for conducting drilling and blasting operations near the active gas pipeline. The simplest and most reliable way to ensure the safety of the protected object from seismic impact is to reduce the intensity of the seismic wave, which is achieved by changing the parameters of drilling and blasting operations. This requires research to determine the impact of blasting operations on the parameters of seismic waves and the development of methods for measuring these parameters. The paper presents a detailed analysis of the seismic blast wave impact on the displacement of the ground and the model gas pipeline. The features of seismic monitoring during blasting operations near the active gas pipeline are shown. The seismic coefficients and attenuation coefficient of seismic waves are determined. It is proved that the readings of the seismic receivers on the surface and in the depth of the massive differ by two or more times.
-
Date submitted2020-05-21
-
Date accepted2020-10-05
-
Date published2020-11-24
Method of calculating pneumatic compensators for plunger pumps with submersible drive
- Authors:
- Eduard O. Timashev
One of the most promising ways to improve the efficiency of mechanized oil production is a plunger pump with a submersible drive, which allows obtaining harmonic reciprocating movement of the plunger. In the pumping process of well products by plunger pumps, oscillations in the velocity and pressure of the liquid in the lifting pipes occur, which lead to an increase in cyclic variable loads on the plunger, a decrease in the drive life period and the efficiency of the pumping unit. To eliminate the pulsation characteristics of the plunger pump and increase the reliability indicators of the pumping unit (in particular, the overhaul period), pneumatic compensators can be used. A method for calculating the optimal technological parameters of a system of deep pneumatic compensators for plunger pumping units with a submersible drive, based on mathematical modeling of hydrodynamic processes in pipes, has been developed. Calculations of the forming flow velocity and pressure in the lifting pipes of submersible plunger units equipped with pneumatic compensators (PC) have been carried out. Influence of the PC technological parameters on the efficiency of smoothing the oscillations of velocity and pressure in the pipes has been analyzed. Non-linear influence of the charging pressure and PC total volume on the efficiency of their work has been established. Optimal pressure of PC charging, corresponding to the minimum pressure in the tubing during the pumping cycle for the considered section of the tubing, is substantiated. Two ultimate options of PC system placement along the lifting pipes are considered. In the first option, PC are placed sequentially directly at the outlet of the plunger pump, in the second - evenly along the lift. It is shown that the first option provides the minimum amplitude of pressure oscillations at the lower end of the tubing and, accordingly, variable loads on the pump plunger. Nature of the pressure and flow velocity oscillations in the tubing at the wellhead for both options of PC placement has similar values .
-
Date submitted2020-06-15
-
Date accepted2020-06-15
-
Date published2020-06-30
Non-destructive testing of multilayer medium by the method of velocity of elastic waves hodograph
- Authors:
- Aleksandr I. Potapov
- Artem V. Kondratev
The method of velocity of elastic waves hodograph, aimed at non-destructive testing of structurally heterogeneous composite materials and products based on them, as well as multilayer products and constructions, is considered. The theoretical basis for determining the propagation velocity of elastic waves in a multilayer medium by the hodograph method is given. Based on the studies, recommendations are given for determining the propagation velocity of elastic waves in each individual layer of a multilayer medium, which allows non-destructive testing of the physicomechanical characteristics of each layer of a multilayer medium. It is shown that in addition to simple multiple reflections in a homogeneous medium, in a multilayer medium with parallel interfaces consisting of two or more layers, complex types of multiple reflected waves and mixed waves (reflected-refracted and refracted-reflected) can arise. The main task of applying the low-frequency ultrasonic method is to determine the acoustic parameters of the propagation of elastic waves (velocities, amplitudes, spectra). The main methods for determining the elastic wave velocities are considered, based on the hodograph equation of the indicated reflected waves in a multilayer medium.
-
Date submitted2019-06-29
-
Date accepted2019-08-25
-
Date published2019-12-24
New technical solutions for ventilation in deep quarries
- Authors:
- S. G. Shakhrai
- G. S. Kurchin
- A. G. Sorokin
The paper discusses the issues of ventilating in deep quarries caused by the intensification of blasting operations at great depths, the increased distance of ore truck transportation to the daylight area, constant change in the geometrical parameters of the quarry, its microrelief and direction of mining, and increased isolation of the mined space from the environment. We provide a brief analysis of the current tools for forced airflow in deep quarries, which showed that the use of forced ventilation is often challenging since it leads to high energy consumption, high level of noise exceeding the permissible parameters, and high speeds of forced air flows may blow the dust off the quarry surfaces. The article presents methods and tools developed at the Siberian Federal University for intensifying the natural airflow in deep quarries by changing the air density at the entrance and exit points of the pit, as well as heating the shady areas using mirrors and solar energy, which do not interfere with mining and blasting operations.
-
Date submitted2019-05-07
-
Date accepted2019-07-11
-
Date published2019-10-23
Operation of a Single-phase Autonomous Inverter as a Part of a Low-power Wind Complex
- Authors:
- A. A. Belsky
- V. S. Dobush
- Shaiban Fuad Haikal
The article discusses the experience of operating a wind power complex with a low-power wind power installa- tion (5 kW), the use of which is promising for powering remote oil production facilities, exploration and other types of mining operations. The structure of the studied complex and its characteristics, technical problems that have arisen during operation for 6 years are given. The elements of the wind energy complex – the battery charge regulator and the inverter-converter are considered. The consequences of the mechanical regulator failure of battery charge are con- sidered and recommendations for its replacement are presented. The issues of diagnostics and repair of one of the main elements of the complex – the inverter-converter, its component – DC link are highlighted in detail. Oscil- lograms of the output voltage of the inverter-converter are presented for different capacities of the DC link and the images of the repaired inverter-converter are given. Recommendations are given on choosing an inverter-converter and setting up the operating modes of the wind energycomplex.
-
Date submitted2018-05-22
-
Date accepted2018-07-04
-
Date published2018-10-24
Multivariance of a velocity model for structural plotting based on seismic and borehole data
- Authors:
- A. P. Sysoev
The paper discusses the peculiarities of structural modelling (forecast of the depths of the reflecting horizons) based on the seismic and drilling data system. Seismic data are represented by vertical time values and the stacking velocity of borehole data that are the depth marks of the reflecting horizons. Vertical time and the depth of the reflecting horizons are bound by the equation of average velocity but the average velocity is not determined in a seismic experiment, therefore an issue of choosing a velocity model of a complex natural object arises. The task of structural modelling is solved by the selection of formal expressions containing correlations between the parameters of the underlying model and kinematic parameters of the wave field. The optimal decision on model selection is determined by the minimum discrepancy between the predicted and actual values of the depth of the sample boreholes. A practical example shows possible variants of the interpretation model. An inverse kinematic problem on converting the vertical time of the reflected waves at the depth of horizons is solved in each production report on the results of seismic work and is probably the most common objective of seismic exploration. Considering the variety of research objects and the apparent obviousness of the solution, this topic is underrepresented in scientific literature.
-
Date submitted2015-10-24
-
Date accepted2015-12-17
-
Date published2016-08-22
Spatial distribution of energy release during propagation of fast electron beam in the air
- Authors:
- V. S. Sukhomlinov
- A. S. Mustafaev
The paper focuses on development of the analytical theory to assess spatial distribution of energy released during propagation of the fast electron beam in a gas, in particular in the air at electron energies of 1-100 keV. An approach adopted by authors [2, 3] to study inelastic deceleration of electrons in the air is further developed here. As the inelastic interaction in most cases leads to energy relaxation while elastic interaction causes distribution isotropization over directions, the first task solved in the paper is finding the electron distribution function including only elastic collisions. In the final part of this paper an analytical solution to this task is presented with account of both types of electron deceleration in the air. The calculations show that when elastic collisions are taken into account this leads to increased spatial density of energy release and to narrowing of the primary energy release region of the fast electrons, as compared to calculations accounting for only inelastic deceleration.
-
Date submitted2015-07-14
-
Date accepted2015-09-28
-
Date published2016-02-24
Ion velocity distribution function in arbitrary electric field plasma
- Authors:
- A. S. Mustafaev
- V. S. Sukhomlinov
Experimental investigations of the ion velocity distribution function (IVDF) are of great importance to various kinds of application: plasma nanotechnology, surface treatment, nanoelectronics, etching processes et al. In this paper, we propose a new probe method for diagnostics of anisotropic IVDF. The possibilities of the method have been demonstrated in arbitrary electric field plasma under conditions when an ion acquires a velocity on its mean free path comparable with the average thermal velocity of atoms. The energy and angular dependency of seven IVDF Legendre components for He + in He and Ar + in Ar have been measured and polar diagrams of the ion motion have been plotted. In order to verify the reliability and accuracy of the method the analytic solution of the kinetic Boltzmann equation for ions in plasma of their own gas has been found. Conditions under which resonant charge exchange is the dominant process and the ambipolar field is arbitrary have been considered. For the ambipolar field the dependence of resonant charge cross-section on the relative velocity has been taken into account. It is shown that the form of the IVDF is significantly different from the Maxwellian distribution and defined by two parameters. The results of theoretical and experimental data taking into account the instrumental function of the probe method are in good agreement. Calculations of the drift velocity of Hg + ions in Hg, He + in He, Ar + in Ar, and mobility of N 2 + in N 2 are well matched with known experimental data in wide range of electric field values.
-
Date submitted2014-09-08
-
Date accepted2014-11-04
-
Date published2015-06-26
Justification of kinematic and power parameters of rack and pinion gear for heavyloaded mining machines
- Authors:
- L. V. Lukienko
- K. V. Galchenko
- I. V. Litvinov
The article contains the research findings on the justification of kinematic and power parameters of a rack and pinion system for heavy-loaded mining machines. The article points out that for a designer to find more reasonable constructive solutions it is advisable to carry out wear assessment of the designed gear at a design stage. Application of additional quality parameters of gearing is proposed, i.e. coefficients of acceleration and sliding velocity and the scoring resistance coefficient. Introduction of these parameters will allow choosing geometrical parameters of the designed gearing, which will possess the best kinematic and power character-istics and will be least inclined to wear.
-
Date submitted2013-07-09
-
Date accepted2013-09-04
-
Date published2014-03-17
A new chemical method of dust suppression for the storage of the rock mass
The using of chemically-active reagents is one of the most promising directions in the process of dust suppression. Due to the need to develop new ways of suppression of dust during storage of the rock mass. The paper provides the analysis of the use of calcium carbide as an element of the dust suppression system and the system of permafrost rocks.
-
Date submitted2009-09-06
-
Date accepted2009-11-14
-
Date published2010-06-25
The estimation of mass velocities in a layered roof and dividing pillars of the mining system in the time of influence of shock stress waves
- Authors:
- V. V. Karpenko
- G. A. Kolton
The mass velocity diagrams transformation in the layered border zone of the mining system in the time of tension explosion waves influence is considered. The explosion wave front is suggested to be parallel to the proximate handing roof environs discontinuity. Under the admitted assumption the mass velocity epures transformation is investigated in the layered roof stone of the mining system and in the dividing pillar.