-
Date submitted2024-04-12
-
Date accepted2024-09-05
-
Date published2024-11-12
Promising reagents for the extraction of strategic metals from difficult-to-enrich mineral raw materials
The need of the mining and processing industry for new types of directional reagents is due to the deterioration of the material composition of the processed ores. Low Au content (less than 0.5-1.0 g/t), finely dispersed Au inclusions (0.1-10.0 microns) in the ore, similar properties of the separated minerals have an extremely negative effect on flotation performance when using traditional reagents, which leads to significant losses of valuable metal with enrichment tailings. Expanding the range of domestic flotation reagents based on the latest achievements of fundamental research and their targeted application at mining and processing companies will compensate for the negative impact of the mineral composition of raw materials and ensure maximum extraction of strategic metals from difficult-to-enrich ores. The use of modern research methods (scanning electron and laser microscopy, UV spectrophotometry, XRF and chemical analysis) made it possible to visualize the adsorption layer of new reagents-collectors of a number of dithiocarbamates with different structures of a hydrocarbon radical and an organic modifier on the surface of gold-containing sulfides. The amount of adsorbed reagents on the surface of minerals has been experimentally determined. The specific features of the fixation of reagents on minerals of various compositions led to optimal correlations of their consumption in the flotation process. Scientifically based reagent regimes ensured an increase in the gold content in the concentrate and a decrease in the loss of gold with tailings by 5-6 % during flotation enrichment of the refractory ore of the Malinovskoe deposit.
-
Date submitted2024-10-29
-
Date accepted2024-10-29
-
Date published2024-11-12
Study of thermodynamic processes of the Earth from the position of the genesis of hydrocarbons at great depths
In the context of significant depletion of traditional proven oil reserves in the Russian Federation and the inevitability of searching for new directions of study and expansion of the raw material base of hydrocarbon raw materials in hard-to-reach regions and on the Arctic shelf, a scientific search is underway for accumulations in complex geological conditions and in manifestations that differ significantly from traditional ones, which include the processes of oil and gas formation and preservation of oil and gas in low-permeability “shale” strata and in heterogeneous reservoirs at great and super-great depths. Within the oil and gas provinces of the world, drilling of a number of deep and super-deep wells has revealed deposits at great depths, established connections between hydrocarbon deposits and “traces” of hydrocarbon migration left in the core of deep wells, which has made it possible to significantly re-evaluate theoretical ideas on the issue of oil and gas formation conditions and the search for technologies aimed at solving applied problems. Modern geochemical, chromatographic, bituminological, coal petrographic and pyrolytic methods of studying oil and bitumoids extracted from the host rocks of deep well cores give a hope for identifying correlations in the oil-source system, revealing processes that determine the possibility of hydrocarbon formation and accumulation, and defining predictive criteria for oil and gas potential at great depths.
-
Date submitted2023-07-05
-
Date accepted2024-06-03
-
Date published2024-12-25
Complete extraction of conditioned ores from complex-structured blocks due to partial admixture of substandard ores
- Authors:
- Bayan R. Rakishev
The paper presents mining-technological substantiation of complete extraction of conditioned ores from complex-structured blocks of benches by mixing a layer of substandard ores of certain sizes. The relevance of the work consists in the development of innovative methods of establishing the parameters of the substandard layer of ores to be added to the conditioned ores. The main problem is to ensure complete extraction of useful components into concentrate from shipped ore with acceptable deviations from the required ones. A new typification of complex-structured ore blocks of the bench has been carried out. Analytical dependences of mining and geological characteristics of complex-structured ore blocks were obtained. Theoretical dependences for determining the main indicators of mineral processing are derived. Analytical dependences for determination of the content of useful component in shipped ore α' – mixture of conditioned ore with the content of useful component α and admixed layer of substandard ore with the content of useful component α'' are offered. For the first time in mining science, a new approach of complete extraction of conditioned ores from complex-structured blocks of benches by grabbing a certain part of substandard ores during excavation, increasing the volume of extracted ore and expanding the extraction of useful components in the concentrate has been substantiated. The increment of useful components can reach 10-15 % of the total volume of extraction, which allows predicting a significant increase in the completeness of mineral extraction from the Earth's interior.
-
Date submitted2022-05-17
-
Date accepted2023-04-03
-
Date published2024-02-29
Improvement of concentrate quality in flotation of low-rank coal
- Authors:
- Sergei A. Kondratev
- Tatyana A. Khamzina
Percentage of high-rank coal with low content of ash, moisture, and sulfur in total coal production output is low. Most of the produced coal has a low quality (lignite, bituminous coal: long-flame and fiery). Under increasing requirements for ecological cleanness of coal, the efficient use of coal products is only possible after improvement of their processing properties. The authors discuss the enhancement of flotation efficiency of low-rank coal using the mechanism of physisorption of a collecting agent in particle – bubble attachment. It is explained why the yield of concentrate with low ash content increases as a result of combination of collectors having different physical properties. It is shown that the surface activity of a heteropolar agent relative to the gas – liquid interface and the adsorption density of the agent govern its collecting properties. Based on the recovery – surface activity relationship, the correlation is found between the collecting activity of a chemical compound and the structure of its molecules. The combination of the collectors with different surface activity enables adjusting collectability and selectivity of the blend. The physisorption mechanism of collectors can be a framework for developing recommendations on modification of concentrate yield and ash content, and on selection of optimized ratios of surface activities of miscible collectors relative to the gas – liquid interface.
-
Date submitted2022-10-28
-
Date accepted2023-03-02
-
Date published2023-04-25
Assessment of the possibility of using iron-magnesium production waste for wastewater treatment from heavy metals (Cd2+, Zn2+, Co2+, Cu2+)
Relevant problems associated with treatment of industrial wastewater from heavy metal ions are considered. Due to industrial development, the amount of wastewater increases as well as the risks of heavy metals getting into surface and groundwater, accumulating in water bodies and becoming aggressive environmental pollutants, which affect the animal and human organisms. To assess the possibility of extracting metal ions (Cd 2+ , Zn 2+ , Co 2+ , Cu 2+ ) from industrial wastewater and their further treatment, studies were carried out on redistribution of heavy metals in the “wastewater – waste” system using iron-magnesium production waste. Samples of the investigated waste weighing 0.1; 0.2; 0.5; 1; 1.5; 2 g were taken for wastewater volume of 50 ml per each subsample. Contact time varied from 5 to 180 min, waste fraction was 1 mm. The interaction process showed that the waste efficiently removes metal ions (Cd 2+ , Zn 2+ , Co 2+ , Cu 2+ ) from industrial wastewater. The efficiency of removing a pollutant from the solution depends on the weight of the waste subsample, initial concentration of metal ions, and contact time.
-
Date submitted2022-02-22
-
Date accepted2022-05-11
-
Date published2022-11-03
Scientific substantiation and development of innovative processes for the extraction of zirconium and rare earth elements in the deep and comprehensive treatment of eudialyte concentrate
- Authors:
- Valentin A. Chanturiya
Based on a package of modern analysis methods, the influence of various acids and energy effects on the morphology, elemental composition, structural and chemical transformations of the mineral surface, and the efficiency of eudialyte concentrate leaching was studied. The mechanism and the optimal conditions and specific features of the destruction of eudialyte and rock minerals and the extraction of zirconium and REE under the influence of various acids, powerful nanosecond pulses, dielectric barrier discharge, electrochemical processing, mechanochemical activation and ultrasound were revealed. The mechanism of formation and the optimal conditions for the dispersion of silica gel, depending on the methods and parameters of energy effects, was theoretically and experimentally substantiated. A combined three-stage circuit of nitric acid leaching of eudialyte concentrate with ultrasonic treatment of the suspension, providing 97.1 % extraction of zirconium and 94.5 % REE, were scientifically substantiated and tested. The conditions for the selective deposition of zirconium and REE were theoretically and experimentally substantiated.
-
Date submitted2021-06-08
-
Date accepted2021-11-30
-
Date published2021-12-27
Management of groundwater resources in transboundary territories (on the example of the Russian Federation and the Republic of Estonia)
Groundwater, as a source of water supply, the most important mineral and geopolitical resource, , is often the only source of high-quality drinking water that is protected from pollution under conditions of increasing deterioration of surface water quality. Transboundary groundwaters are the focus of hydrogeological researchers for a number of reasons, including the reduction and pollution of water resources as a result of economic activities. The increased controversy between states over transboundary water issues has necessitated the development of international legal documents on issues related to water conflict prevention and the sustainable use of fresh water. As part of the analysis of the problem of legal regulation of groundwater extraction from transboundary aquifers and complexes, it is proposed to consider this aspect on the example of Russia. The problems of regulation of rational use and protection of fresh water in the bilateral treaties of the Russian Federation were revealed; a methodology for the management of groundwater extraction in the territory of the transboundary aquifer was developed, the size, parameters, and factors influencing the formation of the transboundary zone have been determined (based on research and analysis of water intake activities in the border areas of the Russian Federation and the Republic of Estonia) were determined.
-
Date submitted2020-09-15
-
Date accepted2021-11-30
-
Date published2021-12-27
Evaluating the effectiveness of fine gold extraction technologies on the example of titanomagnetite beach placers of the western coast of Kamchatka
- Authors:
- Valentina E. Kungurova
The material on the gold content of coastal-marine deposits of the western coast of Kamchatka is analyzed and the resource potential is briefly characterized. A review of gold technological estimates obtained from the study of gold-bearing samples taken in promising areas of the coastal-marine strip, from the Bolshaya Vorovskaya River in the north to Cape Levashova in the south, is presented. Stock materials supplemented by our studies were used. Gold-bearing deposits with very fine (0.05-0.1 mm) and fine (0.1-1.0 mm) gold amounting to 94.6 % were tested, as well as samples with gold up to 2 mm and more in addition to fine gold The content of freely recoverable gold reached 91.9 %. In the case of significant gold reserves in placers, prospects for their commercial development open up. experiments on the enrichment of gold-bearing coastal-marine deposits of Western Kamchatka indicate the possibility of extraction of free gold and other valuable components from them. Gravity technologies and modern equipment developed by ОАО Irgiredmet and JSC ITOMAK are the most effective for their extraction. enrichment of gold-bearing formations with simultaneous extraction of several useful components from them, which is possible with the use of fluoride technology, can also become economically advantageous.
-
Date submitted2021-06-15
-
Date accepted2021-10-18
-
Date published2021-12-16
Study on hydrometallurgical recovery of copper and rhenium in processing of substandard copper concentrates
- Authors:
- Denis S. Lutskiy
- Aleksander S. Ignatovich
Over the past decade, there has been a steady growth in demand for rare metals, with rhenium being one of the most highly demanded, but also one of the most expensive and difficult to obtain. The high demand for rhenium is due to its use as a key component of metallurgical alloys or as a component of catalysts used in the oil refining industry. The aggregate of facts causes profitability of processing of the rhenium-containing mineral resources, which also are the copper substandard concentrates obtained at processing of the Zhezkazgan sandstones. The study focuses on the processes of extraction of copper and sorption recovery of rhenium from solutions of ammonia leaching of copper substandard concentrates. Model solutions similar in the elemental composition to solutions of ammonia leaching solutions of copper substandard concentrates obtained during the processing of Zhezkazgan sandstones were used as an object of the study. The paper estimates extraction characteristics of copper recovery using LIX 84-I solution in kerosene, as well as sorption characteristics of the rhenium recovery process using the Purolite PPA100 anion exchanger. Based on the obtained characteristics the possibility of hydrometallurgical processing of ammonia leaching solutions of substandard copper-sulfide concentrates, and recovery of the obtained commercial products is shown.
-
Date submitted2020-02-19
-
Date accepted2020-04-17
-
Date published2020-10-08
Decrease in coal losses during mining of contiguous seams in the near-bottom part at Vorkuta deposit
- Authors:
- Oleg I. Kazanin
- Valeriy V. Yaroshenko
The problem of formation of extended zones with high rock pressure (HRP) from safety pillars at the boundaries of extraction pillars formed due to the mine layout of complex geometry is considered at the example of JSC Vorkutaugol mines. A detailed analysis of the remaining reserves of the near-bottom part of the deposit was carried out to estimate losses and the impact of HRP zones from the Chetvertyi protective seam to mining operations on the Troinoi upper seam along with the possibilities for the reduction of sizes of HRP zones at the account of expanding the underworked space. Due to research on the near-bottom part of the Vorkuta deposit, within the framework of the accepted layout, a zone at the Komsomolskaya mine and two zones at the Zapolyarnaya-2 mine were singled out, at which losses at the boundaries of the extraction pillars amount up to 13-22 % of the total resources of the mine field. The high volume of losses in these pillars indicates the relevance of research on the priority extraction impact of protective seams on the efficiency and safety of mining operations in the working area of underworked and HRP zones. Based on the analysis of foreign and Russian experience in the pillar cleaning-up at the boundaries of working areas and the methodical guidelines and instructions, a technological scheme was developed that allows increasing the coal mining recovery factor in the near-bottom part of the Vorkuta deposit from 0.75 to 0.9 without fundamental changing of the ventilation and transport networks and also without purchasing any additional mining equipment. The conducted economic calculations confirmed the effectiveness of implementing the new technological scheme for cleaning-up reserves at the boundaries of extraction districts. The economic effect is from 0.079 to1.381 billion rubles of additional profit from coaxial extraction pillars, depending on the mining and geological conditions and the size of the pillars.
-
Date submitted2019-06-06
-
Date accepted2019-08-09
-
Date published2020-04-24
Studies of enrichment of sulfide and oxidized ores of gold deposits of the Aldan shield
The paper presents the analysis of studies of the enrichment of sulfide and oxidized ores in Yakutia deposits. The ore of the deposit is a mixture of primary, mixed and oxidized ores. The main useful component of the studied ore samples is gold with a content of 1.5 to 2.8 g/t, the silver content is low – 5-17 g/t. Ore minerals are represented by sulfides, among which pyrite predominates. The total sulfide content does not exceed 3-5 %. The presence in the ore of free and associated gold with a grain size from fractions of a micron to 1.5 mm. Gold is represented by nuggets in intergrowth with sulfides and also forms independent inclusions. Ores are classified as easily cyanidable. It was found that the content of amalgamable gold is 10-49, the share of cyanidable gold ranges from 66.67-91, the share of refractory gold is 9.0-33.33 %, which in absolute amount equals to 0.24-0.8 g/t. The extraction of gold in gravitation concentrate varies depending on the gold content in the ore and the yield of concentrate and for ores with a gold content of 1.5-2.8 g/t from 40 to 60 %. The direct cyanidation of all studied ore samples established the possibility of extracting gold into solution up to 86.7-92.9 %, the gold content in cyanidation cakes is 0.2-0.3 g/t. Investigations of the gravitation concentrate by the method of intensive cyanidation showed that with an initial gold content of ~ 500 g/t, up to 98.9 % is extracted into the solution. The gold content in intensive cyanide cakes will be 6-15 g/t. A set of studies carried out by the authors of the article at various institutes showed that it is advisable to process ore from the deposit using cyanidation technology with preliminary gravitational extraction of gold.
-
Date submitted2019-07-11
-
Date accepted2019-09-11
-
Date published2020-04-24
Research of lithium sorption by KU-2-8 cation exchanger from model solutions simulating geothermal fluids in the dynamic mode
- Authors:
- Tatiana P. Belova
- Tatiana I. Ratchina
The extraction of chemical compounds from hydromineral raw materials is currently a promising objective. The geothermal deposits in the Kamchatka Territory should be considered as possible sources of lithium, boron and other chemical compounds. Their economic efficiency is justified by the complexity of the use of resources of geothermal fluids. The article presents data obtained as a result of experimental studies of lithium sorption by KU-2-8 cation exchanger from model solutions that simulate geothermal fluids in the dynamic mode. It was shown that in the first phase of sorption, ion exchange results in the absorption of lithium and sodium ions by the hydrogen form of cation exchanger up to the degree of cation exchanger saturation by 78 %. After that, the displacement of lithium ions by sodium ions is observed. The intermediate solutions were obtained in which the molar ratio of Li/Na is 80 times higher than in the initial solution. To separate sodium and lithium, it is proposed to use the lithium form of cation exchanger obtained using a portion of lithium chloride concentrate. The separation occurs due to the displacement of lithium ions by sodium ions. The effluent has a molar ratio of Li/Na = 10.4. The regeneration is carried out with 1 n hydrochloric acid, while the concentration coefficient of sodium chloride equals three.
-
Date submitted2019-05-26
-
Date accepted2019-07-23
-
Date published2019-10-23
Ensuring Stability of Undermining Inclined Drainage Holes During Intensive Development of Multiple Gas-Bearing Coal Layers
At high rates of production face advance, requirements towards reliable operation of undermining drainage holes get raised. The issue of maintaining high intensity of gaseous seams development under naturally increasing gas content, mining depth and capacity of production equipment poses a problem. The greatest threat comes from the loss of hole stability in the bearing pressure affected zone (in front of the face) and in the intensive shift area of overhanging rock corbels (behind the face). Intensification of air leaks due to deformation of borehole channel leads to impoverishment of removed methane-air mixture and an increasing risk to disturb safe aerogas regime in the mining area. The paper describes a mechanism of how coal-face operations affect the state of underground holes and formation of overhanging rock corbels. A typification of basic kinds of borehole deformations is presented. Authors point out critical disadvantages of the most widely-used technological schemes of gaseous seams development under high load on the production face, which hinder normal operation of a gas drainage system. As a result of research, a dependency of shot hole number, as well as the distance between shot hole axes and the borehole, on the stress state of the borehole outline has been defined more precisely. Basing on that, a formula to calculate drilling parameters of the discharge hole system has been suggested. Implementation of these measures will allow to increase the efficiency of underground gas drainage and to maintain growing intensity of gaseous coal seam development.
-
Date submitted2018-05-16
-
Date accepted2018-07-22
-
Date published2018-10-24
Extraction of copper, cobalt and nickel ions from aqueous solutions by extractant CYANEX 272
- Authors:
- L. A. Voropanova
- V. P. Pukhova
The extractant CYANEX 272, which active component is di(2,4,4-trimethylpentyl)-phosphinic acid (C 8 H 17 ) 2 POOH, is effective for extraction of copper (II), cobalt (II) and nickel (II) ions. The extraction of metal ions using di(2,4,4-trimethylpentyl)-phosphinic acid as an extractant is carried out due to the formation of an organophosphorus complex with wide pH range: copper at pH > 2, cobalt at pH > 3, and nickel at pH > 5. They are extracted with an organic phase: copper at pH = 3-7, cobalt at pH = 4-7, and nickel at pH = 6-9, and precipitate in the organophosphorus compound: copper at pH > 7, cobalt at pH ≥ 8, and nickel at pH ≥ 10. The possibility of separation of copper (II) and cobalt (II) is insignificant, the stripping of copper (II) and nickel (II) happens at pH = 4-6, and the stripping of cobalt (II) and any of nickel (II) – at pH = 5-6. The obtained results of ion extraction of the investigated metals can be used not only for processing of technological solutions, but also for purification of effluents from industrial enterprises and mine waters, heap and underground leaching solutions, etc. from the ions of studied metal ions.
-
Date submitted2017-12-29
-
Date accepted2018-03-26
-
Date published2018-06-22
Methods to enhance oil recovery in the process of complex field development of the Yarega oil and titanium deposit
- Authors:
- I. E. Dolgii
Yarega oil and titanium deposit is a unique facility due to a combination of two mineral resources – oil and titanium ore – in one geologic structure. The paper describes mining and geologic conditions of the field, as well as engineering solutions to enhance oil recovery and the efficiency of heat transfer. The author focuses on the issues of deposit opening and preparation for development, and provides recommendations regarding the exploitation procedure of the oil and titanium parts of the field, which take into account field data on the extraction rates of high viscosity oil and titanium ore from the start of deposit development. The paper contains analysis of existing technological schemes of high viscosity oil extraction and steam heating of the oil bed, as well as assessment of their feasibility. Issues of field preparation for development are reviewed from the position of accumulated practical experience, and recommendations on the feasibility of combined underground and open-pit mining are supported with evidence. The main advantages of the proposed system are explained; key technical and economic indicators are calculated.
-
Date submitted2015-12-22
-
Date accepted2016-02-13
-
Date published2016-12-23
Risk of injuries among coal mine workers and its hysteresis
- Authors:
- Yu. Parkhanski
The paper gives an overview of employment in coal mining, levels of extraction and injuries among the coal mine operators in Poland over a span of time from 1954 through to 2010. The injury indicators, such as the incidence rate, severity and the generalized loss index, have been assessed for a period of coal mining sector restructuring from 1993 to 2010. Diverging trends have been revealed, resulting in a need to extend the time span of the analysis. Analysis of records from 1954 to 2010 has shown a multiple cyclicity of trends of change in the values used to derive coefficients. The definition of the Injury Risk has been justified, along with a new way for its representation and its interpretation as a new method with account of the previous studies. Based on this method the injuries at the coal mines of Poland during a period of their restructuring have been investigated with analyzed database expansion to include records from 1954 to 2010.As a result a new dependency, namely the injury risk hysteresis, has been identified.
-
Date submitted2015-12-19
-
Date accepted2016-02-08
-
Date published2016-12-23
A technique for selective extraction of ions of gold and silver from hydrochloric solutions with tributylphosphate
- Authors:
- L. A. Voropanova
- N. B. Kokoeva
Extraction is studied by tributylphosphate (TBP) of ions of gold and silver from hydrochloric solutions during the portional and single time feed of extractant in dependence of the initial concentration of metal ions, temperature, concentration of hydrochloric acid, the ratio of organic (О) and water W phases О:W. The initial solutions contained soluble complex chlorides of gold and silver. When dissolving metal chlorides in the solution of common salt and hydrochloric acid, water soluble coordinate compound are formed that contain complex anions [AuCl 2 ] – , [AuCl 4 ] – , [AgCl 2 ] – , [AgCl 3 ] 2– , [AgCl 4 ] 3– , et al. As an extractant we used the tri-butyl ether of phosphoric acid (С 4 Н 9 О) 3 РО hat belongs to oxygen containing neutral extractants. The formation of coordinate (complex) compounds of TBP and metal polychlorides may be treated as the process of solvation of the extracted metal salt by the extractant. For selective extraction of ions of gold and silver from their hydrochloric solutions by tributylphosphate it is run feeding the extractant portionally to the solution at the minimal time of contact between the solution and the extractant; it helps extracting gold almost completely with the few first portions of the extractant at concentrations of 2n HCl 240 g/dm 3 NaCl and the temperature t = 60°С. Meanwhile the extraction of silver is kept to a minimum. Silver is extracted almost completely after the extraction of gold is over; it is done with tributylphosphate as well at concentrations of 3n HCl, 240 g/dm 3 NaCl and the temperature t = 20°С.
-
Date submitted2015-10-19
-
Date accepted2015-12-20
-
Date published2016-08-22
Changes in thermal plasticity of low grade coals during selective extraction of metals
- Authors:
- V. Yu. Bazhin
As the world oil market tends to be highly volatile, the coal becomes a primary source of organic raw materials for chemical and metallurgical industries. Fossil coals can accumulate high amounts of elements and mixtures quite often reaching commercially valuable concentrations. Reserves of scandium and other rare elements in coal deposits in Siberia alone are sufficient to satisfy the expected global demand for several decades. This study is intended to solve complex tasks associated with extraction of metal oxides using the developed enrichment method to ensure the required thermal plasticity determining the quality and properties of metallurgical coke. Laboratory experiments have been conducted for the enrichment of high-ash coals containing the highest concentrations of metals. Thermal plasticity values have been determined with the help of Gieseler plastometer . Using modern technologies and equipment individual deposits can be turned into profitable production of enriched coking coals with concurrent extraction of rare metals. It has been proven that the highest commercial potential lies with the extraction of scandium and some other rare metals in the form of oxides from the coal.
-
Date submitted2015-08-14
-
Date accepted2015-10-07
-
Date published2016-04-22
Extraction of ions of silver from hydrochloric acid solutions by tributylphosphate
- Authors:
- L. A. Voropanova
- N. B. Kokoeva
The high results of the silver ions extraction from the hydrochloric acid solutions of tributylphosphate during extractant portional introduction were obtained. The extractant batch inclusion increases silver extraction process and reduces the extractant expenditure. The best extraction results were obtained for the solutions with concentration 3N HCl, 240 NaCl g/dm 3 and temperature t = 20 °C. The principal technological scheme of the silver ions extraction from the hydrochloric acid solutions is presented.
-
Date submitted2015-08-02
-
Date accepted2015-10-04
-
Date published2016-04-22
Development of innovative technologies of dedusting in mining and advance coal mine faces
- Authors:
- G. I. Korshunov
- S. B. Romanchenko
The article describes the results of the implementation of investment projects in the field of complex dedusting implemented in major coal producing companies in Russia. Experimental study of the processes reduce the levels of dust in the workplace in the application of modern systems of irrigation and aspiration systems. The factors that determine the mass and composition of particulate airborne dust at various ways of dust suppression. The results of the analysis of the laser dispersed composition of particles removed from the air of the working area
-
Date submitted2015-08-27
-
Date accepted2015-10-05
-
Date published2016-04-22
Processing of alumina production red mud with recovery of scandium concentrate
The chemical and technological principles of scandium recovery from red mud of alumina production with the use of flue gases from sintering furnaces have been developed. The optimal conditions of hydrochemical processes of successive removal of impurities for the production of scandium concentrate with simultaneous obtaining of titanium-containing product have been worked out on a pilot plant.
-
Date submitted2015-07-27
-
Date accepted2015-09-17
-
Date published2016-02-24
Electroextraction of cobalt from sulfate-chloride and sulfate solutions of cobalt and manganese in static conditions
- Authors:
- L. P. Khomenko
- L. A. Voropanova
The dependence of the results of electroextraction cobalt and manganese from aqueous solutions of their sulphate and chloride-sulfate solutions under static conditions was investigated. According to the results of current efficiency and specific energy consumption it has been found that the electrowinning of cobalt from aqueous solutions of cobalt and manganese in static conditions using a titanium cathode should be carried out at low concentration of manganese from sulphate-chloride solution without partitions and from sulphate solutions both without and with the perforated partitions separating the electrolytic cell into cathode and anode space.
-
Date submitted2014-11-01
-
Date accepted2015-01-02
-
Date published2015-10-26
Development of an environmentally safe gold extraction method from refractory ores using sodium thiosulfate as an extractant
- Authors:
- Yu. V. Sharikov
- Ilkka Turunen
The article presents the results of a mathematical model development for the process of gold leaching from gold-containing ores and concentrates. A mathematical model has been developed by analyzing the chemistry of reactions and mass transfer processes. On the base of a kinetic extraction model and a hydrodynamic complete mixing model a mathematical model of thiosulfate leaching process in various types batch reactors, complete mixing flow process vessels and complete mixing reactor columns with different numbers of vessels in a column has been developed. The effect of the number of reactors in a column has been investigated and optimal segmentation conditions have been found. Based on the investigation of the process using the mathematical model a control system structure has been designed to provide maximum conversion at the exit area of a reactor column.
-
Date submitted2014-10-27
-
Date accepted2014-12-28
-
Date published2015-08-25
Extraction of rare earth metals of di-2-ethylhexyl phosphoric acid from phosphoric solutions
- Authors:
- O. V. Cheremisina
The paper is devoted to solvent extraction of rare earth metals exemplified by Сe, Y from standard test and industrial solutions of wet-process phosphoric acid with di-2-ethylhexyl phosphoric acid used as extractant. The mechanism of rare earth metals extraction with di-2-ethylhexyl phosphoric acid was determined and studied on the basis of calculated thermodynamic characteristics. The paper considers the influence of impurity ions (Fe 3+ , Mg 2+ , ) on extraction of rare earth metals using industrial solutions. It has also been determined that for a stripping process the use of sulfuric acid solutions in concentration of 2 mol/l is the most preferable.
-
Date submitted2014-10-15
-
Date accepted2014-12-23
-
Date published2015-08-25
Nickel electrolyte purification from ferrum (III) and copper (II) impurities by extraction using a mixture of oleic acid and triethanolamine
- Authors:
- L. A. Voropanova
- N. T. Kisiev
The conditions of the selective and joint extraction of copper and ferrum impurities from a nickel electrolyte by extraction using a mixture of oleic acid and trietanolamine in kerosene were determined: extraction Fe (III) at 3 < рН ≤ 4, 1 ≤ В:О ≤ 4 and t = 40 °C; extraction Cu (II) at 5 ≤ рН ≤ 6, 1 < В:О ≤ 4 and t = 40 °C; joint extraction of copper and ferrum at рН = 5-6, 1 ≤ В:О ≤ 4 and t = 40 °C. The process flow sheet of selective extraction of ferrum and copper from a nickel electrolyte by extraction using a mixture of oleic acid and triethanolamine in kerosene is given.