The design of an electrolyzer for electrowinning in dynamic conditions is developed. The dependence of the results of electrowinning of cobalt and manganese from sulfate and sulfate-chloride solutions under dynamic conditions using a titanium cathode and a lead anode with 1 % of silver was studied. It was found that the best extraction results for the current yield and the specific energy consumption were obtained by electrolysis from sulfate solutions at a low concentration of manganese in an electrolyser without a perforated baffle plate separating the cathode and anode spaces.
The dependence of the results of electroextraction cobalt and manganese from aqueous solutions of their sulphate and chloride-sulfate solutions under static conditions was investigated. According to the results of current efficiency and specific energy consumption it has been found that the electrowinning of cobalt from aqueous solutions of cobalt and manganese in static conditions using a titanium cathode should be carried out at low concentration of manganese from sulphate-chloride solution without partitions and from sulphate solutions both without and with the perforated partitions separating the electrolytic cell into cathode and anode space.