-
Date submitted2022-09-05
-
Date accepted2023-09-20
-
Date published2024-04-25
Modeling the efficiency of seasonal cooling devices when changing the statistical distribution of weather conditions
The climatic factor of warming, which is evidenced by a significant number of scientists and research teams in Russia and the world, has a significant impact on the cryogenic state of permafrost soil, the preservation of which is one of the most common principles of construction in the North. The influence of projected climatic changes in planning up to 2050 on the efficiency of seasonal cooling devices, the principle of operation of which is based on seasonal soil freezing, is considered. The conducted modeling has shown that in a situation of stable climate, the preservation of the cryogenic state of permafrost soil is realized without the use of additional measures. With warming with a trend of 0.1 °C per year, seasonal cooling devices do not ensure the preservation of the current level of the cryogenic state of the soil and additional measures are required to increase their efficiency in the summer. In the case of more extreme warming with a rate of 0.25 °C per year, the modeling results show that seasonal cooling devices do not significantly affect the rate of soil thawing and the solution to the problem should be its complete replacement with systems with year-round action.
-
Date submitted2023-03-10
-
Date accepted2023-06-20
-
Date published2023-07-19
Enhancement of energy efficiency of the vacuum oil distillation unit using pinch analysis
- Authors:
- Еkaterina А. Yushkova
- Vladimir A. Lebedev
The actual task of the state is to increase the energy efficiency of the oil refinery. The object of research is a vacuum distillation unit, including a preheating unit for raw materials and a furnace for heating fuel oil before the column. Pinch analysis allows to analyze and optimize a large number of heat flows. In this study the analysis and enhancement of efficiency of the research object is carried out by enthalpy pinch analysis. In order to reduce the heat load of the furnaces, the additional flows were introduced into the heat exchange system of the oil heating unit. Parametric optimization of the new heat exchange system was carried out. The minimum needs of the heat exchange system in external energy carriers are determined. An enthalpy cascade of the heat exchange system has been constructed, which clearly shows the distribution of heat between each heat flow of the system. In the analysis of the energy efficiency of a furnace, an important point is the determination of the optimal heat capacity of the combustion products. In this work, we have determined the optimal flow heat capacity, at which the heat loss with the exhaust gases is minimal. As a result of the studies carried out, the efficiency of the fuel oil preheating unit has been increased by maximizing heat recovery, and the cost of external energy carriers has been minimized. By reducing heat loss with flue gases, it was possible to increase the efficiency of the furnace.
-
Date submitted2022-11-11
-
Date accepted2023-01-19
-
Date published2023-12-25
Evaluation of the efficiency of sorbents for accidental oil spill response in the Arctic waters
The development and operation of new oil fields on the Arctic shelf increases the risks of oil spills, which require the use of oil spill response tools and materials that are efficient in harsh climatic conditions. The question of actual efficiency of sorbents for reducing the level of oil pollution in the conditions of the Arctic and subarctic waters is relevant. The work is aimed at a comparative study of the efficiency of sorbents of mineral and organic origin used by coastal enterprises in the Kola Bay as well as a sorbent based on chitin in model systems simulating real conditions in sea waters. The characteristics of sorption agents were determined applying ASTM F716-18 procedure. Sorption capacity was evaluated in respect of ARCO grade oil, diesel fuel and marine oil. The efficiency of sorbents was estimated in model systems “sea water – oil” at water temperature corresponding to the average annual surface temperature in the Barents Sea. Actual data on sorption capacity of commercial sorbents “Lessorb”, “Novosorb”, a sorbent based on vermiculite and chitin sorbent in relation to potential pollutants of waters were obtained. The dynamics of sea water saturation with oil products at –0.5 (±1) and 10 (±1) °С was determined. It is shown that at higher temperature the concentration of oil products in sea water column (in the presence of an oil film on the surface) is on average four times higher than at low temperature. Kinetic dependences were obtained that describe the content of oil products in water column and near-surface layer of sea water in the presence of the studied sorbents at 5 (±1) °C, corresponding to the average annual temperature in the Kola Bay of the Barents Sea. A method is proposed for evaluating the efficiency of sorbents from the values of regression coefficients characterizing the dependence of oil products content in sea water on the character of sorbent and duration of its action.
-
Date submitted2022-06-09
-
Date accepted2022-11-17
-
Date published2022-12-29
Drilling of deep and ultra-deep wells for prospecting and exploration of new raw mineral fields
Scientific and technological progress over the last century has led to an enormous increase in the consumption of minerals, including energy resources. Most of the exploited oil and gas fields are already considerably depleted, so it is necessary to search for new hydrocarbon resources, particularly at great depths. Deep drilling plays a special role in solving this problem. The article considers the world and Russian experience of ultra-deep wells drilling. The methods and technologies used in the construction of wells, as well as complications and accidents occurring during their drilling were analyzed. The analysis revealed that the existing limitations for drilling parameters of deep and ultra-deep wells are caused by the technical characteristics of surface and bottomhole drilling equipment, which do not meet the extreme drilling conditions. The directions for development of deep and ultra-deep well drilling machinery and technologies are suggested. The notion of extreme rock and geological drilling conditions is introduced, which describes drilling in conditions of hydrostatic pressure of flushing fluid column and high bottomhole temperature both at stable and unstable wellbore conditions, coming close to the upper limit of operating technical characteristics of bottomhole assembly, the drill string and flushing fluid.
-
Date submitted2018-11-13
-
Date accepted2019-01-23
-
Date published2019-04-23
Application of automation systems for monitoring and energy efficiency accounting indicators of mining enterprises compressor facility operation
- Authors:
- A. V. Ugolnikov
- N. V. Makarov
The balance of electricity consumption a significant part is occupied by the production of compressed air at the mining enterprises. Many compressor stations of enterprises are equipped with automated parameter management systems that allow reliable, uninterrupted and safe operation of the compressor facilities. But the majority of automation systems at compressor stations do not perform the function of monitoring the energy efficiency indicators of the operation of a compressor station. The article discusses the issue of including compressed air flow sensors (flow meters) in an automated control system of a compressor station, which allows you to control the production of compressed air and the consumption of electrical energy for its production. Monitoring and recording of these parameters makes it possible, using microprocessor technology, to control one of the main indicators of energy efficiency – the specific energy consumption for producing one cubic meter of compressed air, determine how efficiently the compressor station works, and take appropriate measures to reduce specific energy consumption in time. . The use of additional functions of automated control and monitoring systems will allow the development and application of energy-saving measures aimed at improving the energy efficiency of the enterprise, which will lead to a reduction in the cost of finished products and increase their competitiveness
-
Date submitted2018-01-15
-
Date accepted2018-02-28
-
Date published2018-06-22
About the role of hydrafed calcium carboaluminates in improving the technology of complex processing of nephelines
- Authors:
- V. M. Sizyakov
- V. N. Brichkin
The scientific justification and development of the method for industrial synthesis of complex aluminates of alkaline earth metals is an innovative solution that determined several directions in the development of technology for complex processing of nepheline raw materials. It ensures the production of high-quality metallurgical alumina, the effective utilization of nepheline sludge and production of new types of multipurpose by-products. The modern development of these technical solutions is associated with ensuring the energy efficiency of the synthesis of hydrafed calcium carboaluminates (HCCA) and increasing the level of purification of aluminate solutions. The conditions for synthesizing HCCA with the use of calcareous materials of natural and technogenic origin have been experimentally determined, which makes it possible to isolate the average particle diameter as one of the determining factors of this process. The effect of the turnover of the hydrogarnet sludge on the removal of kinetic limitations in the process of deep desalination of aluminous solutions is theoretically justified. The conditions of a two-stage dosage of HCCA are experimentally determined. It is shown that the optimum ratio of the amount of the reagent supplied in the first and second stages is about 3: 2. At the same time, the maximum degree of precipitation of silica provides the production of aluminate solutions with a silicon module at the level of 95,000, which is achieved by using a HCCA synthesized based on chemically precipitated calcium carbonate in the processing of wastes from the production of mineral fertilizers.
-
Date submitted2017-09-22
-
Date accepted2017-11-17
-
Date published2018-02-22
The problem of cadastral appraisal of forest lands taking into account the infrastructure of the forestry fund
- Authors:
- V. F. Kovyazin
- A. Yu. Romanchikov
Forest lands are the main means of production in the forest sector. For the most territories in the Russian Federation there are established methods of cadastral appraisal, but not for the forest regions taking up 2/3 of the country’s area. In 2002 Russian Government made an attempt to solve this problem and recommended a method of cadastral appraisal for the lands of the forestry fund. However, the method did not find practical application and was dismissed in 2010, and no substitution followed. In each subject of the Russian Federation private appraisers offer their own options of forest land valuation, but their results differ significantly even for the lands with comparable species of wood, productivity, site quality and age composition of the stand. Moreover, valuation organizations do not take into account forest infrastructure. Authors propose a universal method suitable for the entire territory of the country, which will allow to calculate specific cadastral value of the forest lands taking into account taxation indices of the wood stands growing there. The method is suitable not only for the objective cadastral valuation of the forest lands – reasonable rental payments will provide an opportunity to develop transport infrastructure in the forestry fund, especially forest roads and bridges, and to make timely arrangements for plant maintenance, forest protection and reproduction, which will have a significant influence on social and economic development of forest regions in Russia.
-
Date submitted2015-12-22
-
Date accepted2016-02-13
-
Date published2016-12-23
Risk of injuries among coal mine workers and its hysteresis
- Authors:
- Yu. Parkhanski
The paper gives an overview of employment in coal mining, levels of extraction and injuries among the coal mine operators in Poland over a span of time from 1954 through to 2010. The injury indicators, such as the incidence rate, severity and the generalized loss index, have been assessed for a period of coal mining sector restructuring from 1993 to 2010. Diverging trends have been revealed, resulting in a need to extend the time span of the analysis. Analysis of records from 1954 to 2010 has shown a multiple cyclicity of trends of change in the values used to derive coefficients. The definition of the Injury Risk has been justified, along with a new way for its representation and its interpretation as a new method with account of the previous studies. Based on this method the injuries at the coal mines of Poland during a period of their restructuring have been investigated with analyzed database expansion to include records from 1954 to 2010.As a result a new dependency, namely the injury risk hysteresis, has been identified.
-
Date submitted2015-12-01
-
Date accepted2016-02-29
-
Date published2016-12-23
Simulation of diesel engine energy conversion processes
- Authors:
- A. S. Afanasev
- A. A. Tretyakov
In order to keep diesel engines in good working order the troubleshooting methods shall be improved. For their further improvement by parameters of associated processes a need has arisen to develop a diesel engine troubleshooting method based on time parameters of operating cycle. For such method to be developed a computational experiment involving simulation of diesel engine energy conversion processes has been carried out. The simulation was based on the basic mathematical model of reciprocating internal combustion engines, representing a closed system of equations and relationships. The said model has been supplemented with the engine torque dynamics taking into account the current values of in-cylinder processes with different amounts of fuel injected, including zero feed. The torque values obtained by the in-cylinder pressure conversion does not account for mechanical losses, which is why the base simulation program has been supplemented with calculations for the friction and pumping forces. In order to determine the indicator diagram of idle cylinder a transition to zero fuel feed mode and exclusion of the combustion process from calculation have been provisioned.
-
Date submitted2014-11-15
-
Date accepted2015-01-11
-
Date published2015-10-26
On the necessity of taking into consideration the increment of the growing stock in cadastral valuation of lands of forest fund
- Authors:
- V. F. Kovyazin
Currently there are no methods of cadastral valuation of forest land although the area covers 2/3 of the territory of the Russian Federation. In 2002, the Federal Land Inventory Service of Russia proposed a method but it failed to find practical use due to the complicated calculation of the cadastral value according to the Faustmann formula and lack of open access to some information about the forest fund and was totally abolished seven years later. There were several reasons for abolishing the method and the main reason was lack of methods to predict a supply of wood to the age of maturity when the cadastral assessment was carried out in the plantations under the age of main felling. The author proposes to take into account the current growth rate of the growing stock per year on one hectare of land in the cadastral evaluation of forest fund lands. Based on the increment of the growing stock it is possible to construct a mathematical model of changes in the forest reserve to the age of maturity. The author suggests using the existing forest inventory materials to build the model. By updating existing data you can obtain any inventory indices including the growing stock in different age plantations. The resulting inventory of plantations at the age of maturity is recommended for cadastral valuation of the forest fund lands. The calculation of the cadastral value of forest land for one taxation quarter with and without current increment of the growing stock is given and the difference is 37 %.
-
Date submitted2013-07-17
-
Date accepted2013-09-07
-
Date published2014-03-17
Increasing efficiency and mine resource development on the Prokopevsk-Kisilevsky deposit
The security issues of the deep mining of Prokopevsk-Kisilevsky deposit the Kuzbass are considered. The analysis of the existing technologies and systems development are executed. The recommendations to improvement of the technical and economic parameters, reducing accidents and injuries of the working off inventories powerful coal steeply inclined seams and steep coal seams were given.
-
Date submitted2010-07-01
-
Date accepted2010-09-23
-
Date published2011-03-21
Improving the efficiency of system of deleting waste on Udachny GOK
- Authors:
- V. P. Dokukin
- A. A. Velnikovskiy
Examined ways to improve the efficiency of hydrotransport systems. A method for determining the most advantageous modes of GTP. The calculation of basic characteristics of the flow of pulp when the grain size, density and quantity released to the enrichment of solid material to installation hydrotransport concentrator.
-
Date submitted2010-07-13
-
Date accepted2010-09-13
-
Date published2011-03-21
Actual ways of increasing the effectiveness of facilities for hydrotransport mountain companies
- Authors:
- A. A. Velnikovskiy
Shown the necessity of improving hydrotransport installations. Built a functional model of the hydrotransport system. As a result of its analysis identified the most relevant ways to improve efficiency of hydrotransport on mining enterprises.
-
Date submitted2010-07-28
-
Date accepted2010-09-30
-
Date published2011-03-21
Ingineering geological problems of high-rise construction with underground space development in Saint-Petersburg
- Authors:
- R. E. Dashko
- A. M. Zhukova
The history of high-rise construction is considered summarily. The main features of high-rise buildings and difficulties connected with theirs engineering and construction especially with underground space development and deep excavations in soft water saturated soils are characterized. Territorial construction guides «Residential and social high-rise buildings» prevail in Saint-Petersburg are analyzed in the context of recommendations for reliable basement choice. Brief description of Pre-Quanernary clays (Upper Vendian clays and Lower Cambrian clays) as basement for high-rise constructions are given. It is placed emphasis that the main feature of Pre-Quaternary clays is zone sequence of physical and mechanical properties and fissuring in depth. Physical and mechanical properties of Upper Vendian clays, Lower Cambrian clays and glacial clays are given. In addition, it is confirmed that glacial soils is not recommended to use as a basement for high-rise buildings.
-
Date submitted2009-08-06
-
Date accepted2009-10-29
-
Date published2010-02-01
Trends in using technology to improve pipeline hydrotransport
- Authors:
- N. V. Golovachev
This paper is devoted to reviewing the most promising directions of development of hydrotransport in the current time. The further improvements of proposals hydrotransport are considered hereinafter. An analysis of technology and means to ensure the effective functioning of hydrotransport systems have been carried out. An algorithm of selection new research in the field hydrotransport is proposed.
-
Date submitted2009-07-25
-
Date accepted2009-09-09
-
Date published2010-04-22
The use of data on stress-strain state of rock mass in solutions of mining-and-technical tasks on the example of the Tishin ore mine
The Permion State Technical University and ASE «VNIItsvetmet» have carried out in situ measurements of stress-strain state at the Tishinsky lead-zinc ore deposit. Measurements and interpretation of deformations and stresses caused by excavation were used. Complex of researches made it possible to solve some important problems for safeguarding effective and secure ore production ore on deep level.
-
Date submitted2008-11-09
-
Date accepted2009-01-13
-
Date published2009-12-11
Industrial potential of oil and gas production enterprise and it`s valuation
- Authors:
- I. V. Burenina
- D. A. Gamilova
Methodically the question about definition of industrial potential and it`s valuation doesn`t develop exactly. In this matter it was marked principal specifics of industrial potential valuation in oil and gas production enterprise. Based on this author defined a concept of potential, its valuation structure, basic sub-aggregates of valuation and its characteristics.
-
Date submitted2008-11-08
-
Date accepted2009-01-26
-
Date published2009-12-11
Principles optimization of expenses for the labour protection of the mining enterprises
Classification of damage from accidents and crashes is given. Procedure optimization expenses for a labour protection and definition of economically sound risk of accidents and crashes is offered. The estimation of economic efficiency of personnel development serving the self-propelled mining equipments on ore mine «Northern» of industrial complex «Pechenga Nikel» is carried out.
-
Date submitted2008-11-19
-
Date accepted2009-01-04
-
Date published2009-12-11
Complex modernisation of manufacture on Open Society «Severstal»
- Authors:
- V. M. Vasiltsova
- O. A. Popova
- S. N. Vinogradov
The metallurgical complex is a part of the manufactures making a basis of industrial and defensive potential of Russia. For increase in volume and production improvement of quality are defined internal possibilities of manufacture on the basis of its modernisation. Attempt of actualisation of the term «modernisation» at the expense of the complex approach to its treatment and workings out of the mechanism of acceptance of corresponding organizational and administrative decisions is undertaken. The technique is specified and the estimation of a technical condition of the equipment is carried out, the technical and economic analysis of modernisation on Open Society «Severstal» is carried out. Ways of perfection of a control system by updating of industrial potential of the metallurgical enterprise taking into account the requirement of the complex approach are defined.