-
Date submitted2024-01-31
-
Date accepted2024-06-03
-
Date published2024-07-04
Rationale for a possibility of using humic preparations production waste for wastewater purification from metals (Cd2+, Zn2+, Mg2+, Cu2+) aimed at developing efficient measures on environmental rehabilitation
Results of studying optimal conditions and parameters for afterpurification of underspoil waters from metal ions using humic acids production waste are presented with a view to develop the efficient measures on environmental rehabilitation of ecosystems disturbed by the development of copper pyrite deposits. The influence of contact time and waste dosage on the purification process was analysed, changes in the pH of wastewater and its impact on the growth and development of plants were studied. The key factors were identified allowing to achieve the efficiency of the purification process – the optimal contact time in the range from 120 to 180 min and waste dosage of 10 g/l. The study showed that the use of waste resulted in a neutral pH value of 7.03 compared to the initial pH value of 5.95. It was ascertained that the use of iron-magnesium production waste in combination with waste from humic preparations production made it possible to achieve the MPC of commercial fishing importance (with the exception of magnesium). Wastewater after the afterpurification process with high magnesium concentrations did not have a stimulating effect on the growth and development of Lepidium sativum L. plants. From biotesting results it can also be stated that there is no negative impact on the growth and development of Lepidium sativum L. The results obtained indicate a potentiality of using afterpurified wastewater for watering plants in the process of initiating the environmental rehabilitation of the disturbed ecosystems.
-
Date submitted2024-04-09
-
Date accepted2024-06-03
-
Date published2024-07-04
Analysis of the geochemical barriers effectiveness as the basis for the use of nature-like water purification technologies
Nature-like technologies are being introduced into many human activities including mining wastewater treatment. This work is based on long-term studies of the Sibay copper-zinc-pyrite deposit development. It is dedicated to assessment of geochemical barriers effectiveness in Cu, Zn, Cd removal from water of the Karagayly River (receiving quarry and dump drainage water). The research is based on the elements’ content and forms in water and bottom sediments, pH values etc. Four types of hydrogeochemical environment (formed due to changes in the water use over the past 20 years) were distinguished using discriminant analysis. The mechanisms of barriers formation and destruction were described. Statistical modeling of the metals’ precipitation was performed by multivariate regression analysis. Cu is adsorbed by recently formed Fe hydroxides, and, to a lesser extent, precipitates with sulfates as water pH increases. Antagonism to Mn hydroxides has been demonstrated, due to different physicochemical conditions for their precipitation. Zn enters solid phase mainly with sulfates, this element also forms its own mineral phases. The second mechanism is adsorption by recently formed Mn hydroxides, which corresponds to the idea of similar conditions for the precipitation of metal hydroxides. Cd behavior reflects conditions intermediate between these of Cu and Zn. Contribution of both mechanisms (related to Fe hydroxides and aqueous sulfates) is equal. Antagonism to Mn is absent. According to the assessment results using of nature-like technologies in situ in watercourses, canals and other water drainage systems is promising. Developed statistical models can be used for needs of experimental studies and artificial geochemical barriers engineering.
-
Date submitted2024-04-25
-
Date accepted2024-06-13
-
Date published2024-07-11
Evaluation of the effectiveness of neutralization and purification of acidic waters from metals with ash when using alternative fuels from municipal waste
- Authors:
- Polina A. Kharko
- Aleksandr S. Danilov
The problem of pollution of natural water objects with heavy metals is extremely relevant for the areas where industrial enterprises are located. Unauthorized discharge of contaminated wastewater, inefficient operation of sewage treatment plants, as well as leakage of drainage waters from man-made massifs lead to changes in the hydrological system affecting living objects. The article studies the composition of ash from the combustion of alternative fuels from municipal waste, and also considers the possibility of using it to neutralize sulfuric acid drainage waters and extract metal ions (Cu, Cd, Fe, Mn, Zn) from them. It has been established that the efficiency of water purification from metals depends on the pH value achieved during the purification process. The pH value is regulated by the dose of the introduced ash, the contact time and depends on the initial concentration of metal ions and sulfates in the solution. Studies on the neutralization and purification of a model solution of sulfuric acid drainage waters of a tailings farm of known composition have shown that in order to achieve a pH of 8-9, optimal for precipitation of metal hydroxides Cu, Cd, Fe, Mn, Zn and Al washed out of ash, and water purification with an efficiency of 96.60 to 99.99 %, it is necessary to add 15 g/l of ash and stir the suspension continuously for 35 minutes. It was revealed that exposure to ash with sulfuric acid waters leads to the transition of water-soluble forms of metals into insoluble ones and their “cementation” with calcium sulfate. The amount of Zn and Fe ions washed out of the ash decreases by 82 and 77 %, Al, Cd, Cu, Mn – by 25 %. This reduces the toxicity of ash, which is proved by a decrease in the toxic multiplicity of dilution of the water extract by 14 times.
-
Date submitted2022-10-28
-
Date accepted2023-03-02
-
Date published2023-04-25
Assessment of the possibility of using iron-magnesium production waste for wastewater treatment from heavy metals (Cd2+, Zn2+, Co2+, Cu2+)
Relevant problems associated with treatment of industrial wastewater from heavy metal ions are considered. Due to industrial development, the amount of wastewater increases as well as the risks of heavy metals getting into surface and groundwater, accumulating in water bodies and becoming aggressive environmental pollutants, which affect the animal and human organisms. To assess the possibility of extracting metal ions (Cd 2+ , Zn 2+ , Co 2+ , Cu 2+ ) from industrial wastewater and their further treatment, studies were carried out on redistribution of heavy metals in the “wastewater – waste” system using iron-magnesium production waste. Samples of the investigated waste weighing 0.1; 0.2; 0.5; 1; 1.5; 2 g were taken for wastewater volume of 50 ml per each subsample. Contact time varied from 5 to 180 min, waste fraction was 1 mm. The interaction process showed that the waste efficiently removes metal ions (Cd 2+ , Zn 2+ , Co 2+ , Cu 2+ ) from industrial wastewater. The efficiency of removing a pollutant from the solution depends on the weight of the waste subsample, initial concentration of metal ions, and contact time.
-
Date submitted2021-03-05
-
Date accepted2021-09-07
-
Date published2021-12-16
Utilization of sewage sludge as an ameliorant for reclamation of technogenically disturbed lands
- Authors:
- Tatyana A. Petrova
- Edelina Rudzisha
When rehabilitating technogenically disturbed lands of mining facilities, fertilizers and ameliorants are to be applied due to the lack of organic matter and nutrients required for the restoration of the soil and vegetation layer. The use of unconventional fertilizers (ameliorants) based on sewage sludge is one of the actual directions of land reclamation at mining sites. The purpose of the work is to summarize and analyze up-to-date information on the effectiveness of the use of sewage sludge for the reclamation of technogenically disturbed lands of mining and processing industries. The analysis is based on a review of recent studies aimed at assessing the impact of introduced sediment on soils, plant communities, and rehabilitated areas. The introduction of sewage sludge has a positive effect on the physical and chemical parameters of the soil (optimizes density and aggregation), saturates it with nutrients, i.e. N, P, K, Ca, Mg, and Na, thus improving plant growth indicators. However, it may contain a number of heavy metals and pathogens; therefore, studies of each sediment and conditions of reclaimed areas are necessary.
-
Date submitted2020-12-11
-
Date accepted2021-03-30
-
Date published2021-06-24
Development of new compositions for dust control in the mining and mineral transportation industry
Dust control in summer and winter periods is a topical problem associated with conducting open pit mining operations; however, at negative temperatures the additional requirements are imposed on dust suppressants. Preventive compositions are proposed, in which light and heavy gas oils, obtained from catalytic cracking and delayed coking, are used as base components. Involvement of heavy fractions allows to increase the flash point, thereby reducing the flammability of dust suppressant, improve its adhesion properties by increasing the content of polyaromatic hydrocarbons and reduce the cost of the final product. In order to improve low-temperature and adsorption properties of developed dust suppressants, heavy oil residues (cracking residue and tar) are included in their composition in various concentrations: 2-10 wt.%. Alternative compositions of dust suppressants, obtained by water emulsification of vinylated alkyd oligomer, are developed; the ability of this dispersion to form strong films on dusty surfaces is examined. The efficiency of using aqueous solution of vinylated alkyd oligomer as a summer dust suppressant is demonstrated. The results of this study include the development of new preventive compositions with improved low-temperature properties and confirmation of the theoretical part of the study by the results of performance tests on a laboratory facility.Alternative compositions of dust suppressors have been developed, which were obtained by emulsifying a vinyl alkyd oligomer (VAO) in water; the ability of this dispersion to form strong films on dusty surfaces has been studied. The efficiency of using an aqueous solution of vinyl alkyd oligomer in the summer period as a dust suppressant is shown. The results of this study are the development of new prophylactic formulations with improved low-temperature properties and confirmation of the theoretical part of the study by the results of tests of operational characteristics in a laboratory facility.
-
Date submitted2020-06-14
-
Date accepted2020-06-14
-
Date published2020-06-30
Geochemical approach in assessing the technogenic impact on soils
- Authors:
- Galina I. Sarapulova
The soil assessment was carried out in the technogenically-affected area of Irkutsk Oblast with the geochemical approach as a key geoecological method using physical and chemical techniques of analysis and ecodiagnostics. Diagnostic signs of the disturbed natural properties of the soil were revealed up to a depth of 40 cm in the profile based on macro- and micromorphometric parameters. The content of heavy metals (HM) – Pb, Zn, Hg, and Cu with an excess of standards was determined, and empirical HM – pH correlations were obtained by statistical clustering of the data array. The contributions of additional factors affecting the chemical element distribution in the soil layer were investigated. Significant soil contamination with sulfates and the possibility of implementing the ion-exchange of HM andfor element immobilization were revealed. It was shown that reactions with sulfates and the influence of pH, HM exchange processes involving mobile K and P can determine the nature of the described chemical element distribution in the multi-factor-contaminated technogenic soil. However, the effectiveness of such types of interaction is different for each metal and also depends on the quantitative ratio of substances and soil characteristics, even under a minor change in pH. Two-parameter correlations of HM distribution in sulfate-contaminated soils confirmed the different degrees of involvement of chemical elements in these types of interactions. The results obtained and the identified factors are of applied significance and can be used as the basis for geoecological differentiation of the contaminated soil, as well as for determining local geochemical fields in the technogenesis zone. Areas of advanced research are related to three-dimensional modeling for a more complete study of the cause-and-effect relationships of geochemical parameters.
-
Date submitted2018-07-12
-
Date accepted2018-09-16
-
Date published2018-12-21
Environmental Geochemical Assessment of Technogenic Soils
- Authors:
- G. I. Sarapulova
The purpose of this study was to obtain diagnostic features and criteria for the distribution of heavy metals in technogenically altered soils in the area of industrial facilities, depending on their altered geochemical properties, which make it possible to fix chemical elements in landscapes (the formation of geochemical barriers). On the basis of the geoecological assessment, disturbance of the soil buffer properties, which is reflected in the ionic composition change, alkalization, pH increase, and sulfate-chloride salinization have been revealed. This forms the heavy metals alkaline barrier. For example, in case of Cu, Pb, Zn, and N, it contributes to their accumulation and subsequent concentration in the soil layer due to the exchange interactions between chemical elements and Na + , K + , Ca 2+ cations. Soil saturation with sulphates also increases the probability of metals demobilization in the soil layer. It has been shown that intra-sectional soil migration of oil products (one of the most common pollutants of industrial areas) and chemical elements occurs at a depth of 30-50 cm, where the oil products based on a clay sorption layer form a technogenic barrier.
-
Date submitted2009-08-03
-
Date accepted2009-10-30
-
Date published2010-02-01
Geotechnical engineering features of the estimation of stability of heavy constructions of designed cement works in Novorossiysk
- Authors:
- Yu. V. Khaliullina
In the paper possibilities of constructing industrial heavy structures near slopes are described. The influence of tectonics, seismicity, a relief, deposit rocks thicknesses, their physical properties of geotechnical engineering feature are analyzed. The law of marls durability change is established. Positions of the most probable surfaces of sliding in cracked monoclonal deposit thickness are shown. The estimation of stability of the loaded slopes is made. Some recommendations for maintenance of structure stability are given.
-
Date submitted2009-08-22
-
Date accepted2009-10-30
-
Date published2010-02-01
Individual thermosteam bath
- Authors:
- N. A. Kotenkov
In work the developed device – an individual thermosteam bath is presented, allowing to lower risk сooling diseases and other occupational diseases to raise comfort of conditions and labour productivity of miners. Distinctive feature consists that the head of the patient is out of a zone of influence of hot steam. Accordingly there is no loading on vessels of a brain and there is no oxygen lack. In the course of application of the given device vessels extend, blood goes on periphery, releasing all organism from the stagnant blood formed as a result of narrowing of vessels, arterial pressure is normalised, work of all bodies improves. The strengthened movement of blood promotes good thermoregulation, increase of immunity and adaptation of an organism to adverse environmental conditions.
-
Date submitted2009-07-29
-
Date accepted2009-09-15
-
Date published2010-04-22
Preconditions for application of supports of different types in productive workings of low-thick gently-pitching deposits in tectonically stressed massif (for conditions of the Karnasurt ore mine)
- Authors:
- A. V. Lovchikov
- A. V. Matytsyn
The paper presents the data on the mining-geological conditions for mining and types of stope supports applied at the Karnasurt Mine, the Lovozersky rare-metal deposit. The peculiar feature of mining conditions is the presence of high subhorizontal tectonic stresses in the rock masses, which make the stope roofs more stable, allowing application of non-reinforced types of support.
-
Date submitted2009-07-02
-
Date accepted2009-09-30
-
Date published2010-04-22
Improved light-weight support types in mine workings
- Authors:
- V. A. Smirnov
- A. E. Khlusov
- B. N. Samorodov
A wider introduction of the efficient light-weight support types into practice, as compared with heavy support, allows to reduce by several times the material capacitance and labour costs in maintenance of stability of mine workings. New types of supports and their parameters have been considered and their application was substantiated.
-
Date submitted2009-07-19
-
Date accepted2009-09-11
-
Date published2010-04-22
Calculation of supports of parallel workings divided with yieldable pillars at anthracite seams
The article presents the methods for calculation of supports of parallel workings divided with yieldable pillars at anthracite seams. Consideration is given to the development of experimental data card for protection and maintenance of paired conveyor entries with using the steelpolymer anchor supports.