-
Date submitted2023-07-04
-
Date accepted2024-05-02
-
Date published2025-02-25
Study of the pore structure in granite and gabbrodolerite crushed stone grains of various sizes
- Authors:
- Elena E. Kameneva
- Viktoriya S. Nikiforova
The results of a study on the pore structure of crushed stone grains of various sizes, obtained through staged disintegration of gabbrodolerite and microcline granite – rocks differing in texture, structure, and mineral composition – are presented. Research conducted using X-ray computed microtomography revealed that disintegration leads to changes in the pore structure of the rocks. The increase in overall porosity and pore concentration in the crushed stone grains is associated with the formation of newly developed pores of various sizes and sphericity. A clear relationship between the porosity of the crushed stone grains and their size is absent, which is due to the textural and structural characteristics as well as the mineral composition of the original rocks. The scale factor is evident only in the case of gabbrodolerite, which is characterized by a fine-grained structure, massive texture, and stable mineral composition. Fine gabbrodolerite grains exhibit lower pore concentration compared to larger grains, which aligns with the statistical theory of rock strength, according to which the probability of defects (pores and microcracks) decreases as the sample size diminishes – the smaller the grain size, the higher its strength. In contrast, for porphyritic granites with an uneven grain size, the trend is reversed – smaller grains are more porous. A study of the porosity of individual rock-forming minerals in granite showed that pores are unevenly distributed in the granite crushed stone grains. The highest concentration of pores is typical for microcline. The presence of brittle and porous microcline inclusions in the granite crushed stone grains leads to the formation of new pores and microcracks, whose number increases with the repeated application of load during staged disintegration.
-
Date submitted2023-06-25
-
Date accepted2024-11-07
-
Date published2025-02-25
Study of wormhole channel formation resulting from hydrochloric acid treatment in complex-type reservoirs using filtration and X-ray computed tomography methods
- Authors:
- Andrei A. Аbrosimov
The primary function of hydrochloric acid treatment (HAT) is to create the maximum number of high-conductivity channels in the near-wellbore zone of the reservoir to restore its permeability and enhance hydraulic connectivity between the undisturbed part of the formation and the well. The objective of this study is to physically model HAT on core samples from the Orenburg oil and gas condensate field and to research the impact of such treatment on the structure of the pore space of rocks related to complex-type reservoirs. The complexity of the rock's pore space and the low permeability of the formations are distinguishing features of the study object. For this reason, HAT is a widely applied method for production intensification, necessitating the verification of acid injection rates, where the success criterion is the formation of high-conductivity filtration channels (wormholes) in the near-wellbore zone. These channels significantly expand the drainage area of wells, thereby bringing additional reservoir sections into development. The study examined the characteristics of filtration channel development resulting from acid treatment. Their structure was characterized and analyzed using X-ray computed tomography. The complex study confirmed the accuracy of the selected injection rate and provided practical recommendations for enhancing the efficiency of HAT.
-
Date submitted2023-07-07
-
Date accepted2023-12-27
-
Date published2024-12-25
A new insight into recording the mineral composition of carbonate reservoirs at well killing: experimental studies
Well killing operation remains an important technological stage before well workover or servicing, during which filtrate penetrates the bottomhole area of the formation. The impact of process fluids and their filtrate on rock has a significant influence on permeability and porosity of carbonate reservoirs, which decrease due to fines migration. There are few known scientific studies of the interaction of killing fluid filtrate with carbonate rock and fines migration. In our experiments, an aqueous phase was used which is the basis for well killing in pure form, for the preparation of blocking agents and is used in reservoir pressure maintenance system. Core samples taken from the pay of the reservoir were used to simulate the well killing process with generation of reservoir thermobaric conditions. Killing fluid filtrate was kept for seven days, which characterizes the average workover time at flowing wells in the fields of the Perm Territory. Using micro-X-ray tomography and scanning electron microscope, images were obtained before and after the experiment, which allowed confirming a decrease in total number of voids due to fines migration and, as a consequence, a decreasing permeability of samples. Measurement of pH and fines concentration in the aqueous phase was performed before and after the experiment and pointed to mineral reactions occurring as a result of rock dissolution. The results of experiments made it possible to record a decrease in permeability of carbonate samples by an average of 50 % due to clogging of void space and migration of fines (clayey and non-clayey).
-
Date submitted2022-10-26
-
Date accepted2023-02-13
-
Date published2023-07-19
Determination of the grid impedance in power consumption modes with harmonics
The paper investigates the harmonic impedance determination of the power supply system of a mining enterprise. This parameter is important when calculating modes with voltage distortions, since the determined parameters of harmonic currents and voltages significantly depend on its value, which allow the most accurate modeling of processes in the presence of distortions in voltage and current. The power supply system of subsurface mining is considered, which is characterized by a significant branching of the electrical network and the presence of powerful nonlinear loads leading to a decrease in the power quality at a production site. The modernization of the mining process, the integration of automated electrical drive systems, renewable energy sources, energy-saving technologies lead to an increase in the energy efficiency of production, but also to a decrease in the power quality, in particular, to an increase in the level of voltage harmonics. The problem of determining the grid harmonic impedance is solved in order to improve the quality of design and operation of power supply systems for mining enterprises, taking into account the peculiarities of their workload in the extraction of solid minerals by underground method. The paper considers the possibility of determining the grid impedance based on the measurement of non-characteristic harmonics generated by a special nonlinear load. A thyristor power controller based on phase regulation of the output voltage is considered as such a load. Simulation computer modeling and experimental studies on a laboratory test bench are used to confirm the proposed method. The recommendations for selecting load parameters and measuring device connection nodes have been developed.
-
Date submitted2022-05-12
-
Date accepted2022-09-06
-
Date published2022-11-03
Morphometric parameters of sulphide ores as a basis for selective ore dressing
To assess the possibility of selective disintegration and reduction of overgrinding of hard-to-reproduce ores, optical microscopic and X-ray microtomographic studies were carried out and quantitative characteristics of morphological parameters of disseminated and rich cuprous ore samples from Norilsk-type Oktyabrsky deposit were identified. Among quantitative morphological parameters the most informative are area, perimeter, edge roughness, sphericity, elongation and average grain spacing for disseminated copper-nickel ores; area, perimeter, edge roughness and elongation for rich cuprous ores. The studied parameters are characterized by increased values and dispersion in ore zones, which is especially important for fine-grained ores, which are difficult to diagnose by optical methods. Three-dimensional modelling of the internal structure of sulphide mineralisation samples was carried out using computed X-ray microtomography, which allows observation of quantitative parameters of grains, aggregates and their distribution in the total rock volume and interrelationship with each other. The evaluation of rock pore space by computer microtomography made it possible to compare the results obtained with the strength characteristics of rocks and ores, including those on different types of crushers. The obtained quantitative characteristics of structural-textural parameters and analysis of grain size distribution of ore minerals allow us to evaluate the possibility of applying selective crushing at various stages of ore preparation
-
Date submitted2022-03-17
-
Date accepted2022-10-04
-
Date published2022-11-10
Improving the reliability of 3D modelling of a landslide slope based on engineering geophysics data
Landslides are among the most dangerous geological processes, posing a threat to all engineering structures. In order to assess the stability of slopes, complex engineering surveys are used, the results of which are necessary to perform computations of the stability of soil masses and assess the risks of landslide development. The results of integ-rated geological and geophysical studies of a typical landslide slope in the North-Western Caucasus spurs, composed of clayey soils, are presented. The purpose of the work is to increase the reliability of assessing the stability of a landslide mass by constructing a 3D model of the slope, including its main structural elements, identified using modern methods of engineering geophysics. Accounting for geophysical data in the formation of the computed 3D model of the slope made it possible to identify important structural elements of the landslide, which significantly affected the correct computation of its stability.
-
Date submitted2021-08-10
-
Date accepted2021-12-10
-
Date published2021-12-27
Possibilities of accounting the fracturing of Kashiro-Vereyskian carbonate objects in planning of proppant hydraulic fracturing
One of the effective methods of oil production intensification for heterogeneous Kashiro-Vereyskian clay-carbonate sediments of the Volga-Ural oil and gas bearing province is proppant hydraulic fracturing. Prospects of realization for this technology are considered in the article on the example of the Vereyskian development object of Moskud’inskoye field. Based on the analysis of rocks samples investigations of Vereyiskian sediments, lithological types of carbonate rocks differing in their structural features are distinguished. Tomographic investigations of rock samples were carried out, as a result of which the rock fracturing for some lithotypes was determined and studieds. Under natural geological conditions, depending on the degree of fracturing progression and technological conditions of development, these intervals may or may not be involved in well operation. When hydraulic fracturing is performed, potentially fractured areas that are not in operation can be successfully added to oil production. Based on analysis of hydrodynamic well investigations, the fracturing of the Vereyskian object of the Moskud’inskoye field was studied on the basis of the Warren-Ruth model. With the help of geological and technological indicators of development, prediction fracturing was obtained, which was used for the construction of the natural fracturing scheme. Areas of both pore and fractured reservoirs development were identified on the deposit area. As a result of statistical analysis, the influence of fracturing on efficiency of proppant hydraulic fracturing was determined. Based on the linear discriminant analysis, a statistical model for predicting the efficiency of proppant fracturing was developed. It was shown that in addition to natural fracturing, the results are most strongly influenced by specific proppant yield, formation pressure, permeability of the remote bottomhole zone and skin effect. Based on the developed model, prospective production wells of the Moskud’inskoye field are identified for proppant hydraulic fracturing.
-
Date submitted2020-05-19
-
Date accepted2021-03-02
-
Date published2021-04-26
Results of Comprehensive Geophysical Studies on the Search for Crypts on the Territory of Suburban Necropolis of Tauric Chersonese in the Karantinnaya Balka
The article presents the results of comprehensive studies carried out by the research team of Saint Petersburg Mining University in cooperation with the specialists from the State Museum-Preserve "Tauric Chersonese" in 2019. The purpose of the work was to discover and map antique and medieval crypts (ancient burial structures) on the territory of suburban necropolis of Tauric Chersonese in the Karantinnaya balka. The complex of geophysical methods included continuous ground penetrating radar sounding at two center frequencies of 350 and 500 MHz and contactless electrical tomography. To minimize spatial errors in the process of studies, topographic and geodetic works were carried out. For the first time wave electromagnetic effects were identified, which indicated the positions of hidden underground crypts. Geological factors were established that are favorable for cutting crypts in the layered thickness of Sarmatian limestones. The obtained results allowed to justify the feasibility of continuing geophysical works at the necropolis in order to study interior space of the discovered crypts and to determine the boundaries of archaeological heritage.
-
Date submitted2019-05-07
-
Date accepted2019-07-11
-
Date published2019-10-23
Operation of a Single-phase Autonomous Inverter as a Part of a Low-power Wind Complex
- Authors:
- A. A. Belsky
- V. S. Dobush
- Shaiban Fuad Haikal
The article discusses the experience of operating a wind power complex with a low-power wind power installa- tion (5 kW), the use of which is promising for powering remote oil production facilities, exploration and other types of mining operations. The structure of the studied complex and its characteristics, technical problems that have arisen during operation for 6 years are given. The elements of the wind energy complex – the battery charge regulator and the inverter-converter are considered. The consequences of the mechanical regulator failure of battery charge are con- sidered and recommendations for its replacement are presented. The issues of diagnostics and repair of one of the main elements of the complex – the inverter-converter, its component – DC link are highlighted in detail. Oscil- lograms of the output voltage of the inverter-converter are presented for different capacities of the DC link and the images of the repaired inverter-converter are given. Recommendations are given on choosing an inverter-converter and setting up the operating modes of the wind energycomplex.
-
Date submitted2018-12-25
-
Date accepted2019-03-02
-
Date published2019-06-25
Non-linear electrical load location identification
- Authors:
- S. Pirog
- Ya. E. Shklyarskiy
- A. N. Skamyin
The article discusses the issues of identifying the location of non-linear loads in electrical networks which makes the main contribution to the distortion of the non-sinusoidal voltage and current in the distribution network of an industrial enterprise, including mining enterprises. The existing methods for determining the location of the source of higher harmonic components in voltage and current are considered, their advantages and disadvantages are revealed. The main disadvantages of the methods used include the low accuracy and incorrectness of their use in existing enterprises. When developing a new method, the authors were faced with the task of simplicity of its use in the conditions of industrial operation of electrical equipment and the absolute correctness of the results obtained. The proposed method of identifying the source of higher harmonics is based on the variation of the parameters of the power system, in particular, the change in resistance of power transformers taking into account their transformation ratio. It is shown that by varying the transformation ratio during regulation under load, the total coefficient of the harmonic components of the voltage changes. Based on the constructed dependencies, the variation of the derivative of this function with different variations of the parameters of sources of higher harmonics is analyzed and a method is developed that allows determining the share contribution of consumers to the total harmonic component of the voltage.
-
Date submitted2018-05-20
-
Date accepted2018-07-07
-
Date published2018-10-24
Justification of representative data volume of porosity and permeability properties for obtaining statistically reliable petrophysical connections
- Authors:
- A. A. Abrosimov
- E. V. Shelyago
- I. V. Yazynina
The article discusses the issues of justifying the data volume for a petrophysical description of an object based on the results of traditional laboratory measurements, as well as X-ray tomography data processing. A new approach to the calculation of porosity and permeability properties of reservoirs with the data of the X-ray tomography method by forming an array of virtual cubes is considered. The issues of required number of allocated cubes for fluid dynamics modeling are discussed. The criteria for the number of laboratory measurements and virtual cubes derived from a digital model for obtaining statistically reliable petrophysical connections are shown. Paper concludes that it is necessary to correctly compare the calculated and laboratory petrophysical connections.
-
Date submitted2017-12-29
-
Date accepted2018-03-06
-
Date published2018-06-22
Evaluation of signal properties when searching for cavities in soil under concrete slabs by radio detection stations of subsurface investigation
- Authors:
- G. V. Rudianov
- E. I. Krapivskii
- S. M. Danilev
A method of localization of concealed cavities on the basis of studying of the reflected electromagnetic impulses is considered in the paper. An issue of early detecting of concealed cavities in engineering facilities is a critical one due to a significant influence on further serviceability of a structure. Problems of localization of concealed cavities in the soil body under the concrete slabs of hydropower stations were studied; the results of ground radar detecting investigations of the cavities, physical simulation of a cavity as well as a mathematical modeling of a reflected signal are presented. Modern subsurface radar detection provides methods which allow to reliably detect concealed cavities in the soil. However, it is possible only in case of a clear boundary between the adjacent layers that conditions a jump of dielectric permeability. In the result of an abrupt change of dielectric permeability a reflected wave occurred; the existence of subsurface heterogeneity is conditioned by the properties of this wave. Moreover, the greater is the difference between the values of dielectric permeability in the adjacent layers, the larger amplitude the reflected wave will have. If the cavity is at the stage of forming, i.e. it is filled with the soil of reduced density, then there is no clear boundary at the border of the layers which will condition a gradual change of dielectric permeability with depth. In this case an amplitude of a reflected wave will be minimal and a formation signal will be masked out by jamming signals reflected from various heterogeneities. In such case to determine a cavity at the stage of forming seems to be impossible. To determine poor signals an analysis of a phase of a reflected signal may be used; phase alters in compliance with the reflection coefficient change pattern. The article contains information about signals reflected from the heterogeneities and a conclusion regarding a possibility of detecting cavities in the soil on the basis of a method of coherent processing of signals is made.
-
Date submitted2017-09-17
-
Date accepted2017-11-06
-
Date published2018-02-22
Collaborative interpretation of the data obtained by resistivity and ground penetrating radar methods for assessing the permeability of sandy clay soils
- Authors:
- D. A. Lalomov
- V. V. Glazunov
A method for estimating the filtration factor of sandy clay soils is considered on the basis of a joint interpretation of the data of a set of methods of engineering electrical exploration, including electrical resistivity tomography and ground penetrating radar studies. The solution of this problem is based on the use of known empirical connections between the imaginary and real parts of the complex dielectric permittivity, specific electrical resistance, and Q factor. An example of the effective joint use of the ground penetrating radar and non-contact electrical resistivity tomography shows how to obtain qualitative and quantitative estimates of a changing filtration factor in a draining road layer. It is necessary to use precise engineering geological information in order to provide the required estimates. The proposed approach makes it possible to describe continuous profiles of a pavement and underlying layers by ground penetrating radar and electrical resistivity tomography, as well as to assess soil properties when conducting an electrical survey from the surface of asphalt concrete pavement. Recommendations for the implementation of the developed methods of complex engineering and geophysical research are given for solving issues of repair work design, supervision, and quality control of road construction.
-
Date submitted2016-09-21
-
Date accepted2016-11-04
-
Date published2017-02-22
Combined 2D inversion of electrotomographic and audio-magnetotellurgic sounding data to solve mining problems
- Authors:
- V. A. Kulikov
- A. E. Kaminskii
- A. G. Yakovlev
Electrical methods of exploration are widely applied in prospecting and estimation of ore mineral resources. It is not always that geoelectrical models obtained in the course of interpretation of different types of electric and electromagnetic sounding are in line with each other. This leads to difficulties in geological interpretation of electrical exploration results. In single cases a geological model can be built that with great precision satisfies data from different electrical explorations, for instance, results of geometric and inductive electromagnetic soundings. For this purpose an algorithm of combined inversion of electrotomographic and audio-megnetotellurgic sounding data has been developed and implemented by A.E.Kaminskii in software ZondRes2D. Advantage of combined inversion has been shown for investigation of sections up till 400-500 m deep on synthetic models and actual field data.
-
Date submitted2014-09-27
-
Date accepted2014-11-11
-
Date published2015-06-26
Electric network equivalenting in the presence of high harmonics
The article deals with equivalenting of complex electrical networks of industrial enterprises. In the article the different methods of averaging equivalenting elements in power systems are compared, specifically, the method of moments, the equivalent section method, and the average value method. The current value of the capacitor bank as part of the electrotechnical complex of the enterprise is the main criterion for determining the equivalenting error of the electric network. The equivalenting in the presence of high harmonics in electrical networks of the enterprise is considered by applying the methods under discussion. Comparison of these equivalenting methods in the presence of high harmonics shows that the error in the calculation of capacitor bank current ranges from 3,8 to 14,7 %. In addition, the most accurate method for determining the capacitor bank overload is the method of moments.
-
Date submitted2010-07-29
-
Date accepted2010-09-27
-
Date published2011-03-21
Efficiency increasing of condenser batteries operation in mining enterprise`s electric circuits
- Authors:
- A. N. Skamin
This work contains the method of effective reactive power compensation at the expense of high harmonics reduction. The decrease of condenser batteries overloading from the high harmonics is based on variation of condenser power depending on current and voltage spectral structure, electric network parameters and load power.
-
Date submitted2010-07-30
-
Date accepted2010-09-10
-
Date published2011-03-21
Definition areas of possible migration gas fromthe reservoir by cross-hole seismic tomography method
- Authors:
- N. A. Poznyakova
Possibilities of cross-hole a seismoacoustic tomography method for studying tightness a tire-cover of a reservoir underground storehouse of gas (USG), created in water-bearing horizont. Research cross-hole spaces for definition zones possible migration and accumulation gas outside of a trap are considered. The system of supervision used at carrying out cross-hole seismoacoustic tomography is proved, the example of revealing zones migration and accumulation gas outside from reservoir is resulted. Prospects application the given method on USG in a monitoring mode are defined.
-
Date submitted2009-10-22
-
Date accepted2009-12-27
-
Date published2010-09-22
Preconditions for prediction of technogenic seismic activity by cycles of objects of the solar system
- Authors:
- B. G. Tarasov
- A. G. Olovianny
- L. V. Bugaenko
The paper contains the statistical rows of rockbursts, sudden outbursts of methane at coal mines and ore mines in Russia for the period from 1954 to 2007, as well as the reflection in them of the eleven-year cycles of the Sun activity. Some results are presented of computer modeling of activation periods of outburst-hazardous state of rock mass at coal mines of the Kuzbass basin. Recommendations are given.
-
Date submitted2009-10-25
-
Date accepted2009-12-19
-
Date published2010-09-22
Principal technologies for prevention of natural dangers at coal mines
- Authors:
- Jozef Dubinsky
Modern mining of mineral resources to be the industry accepted by the society must meet the criteria for sustainable development. Work safety is its important element, which is a particular sphere in underground coal mines in the view of natural hazards occurring numerously, including the catastrophic failures. Among them are gas hazard, fires and rock burst hazard. The selected methodological solutions in terms of their recognition and technologies applicable for the actively combat of these threats, which are featured by high efficiency, have been pointed out.
-
Date submitted2008-10-10
-
Date accepted2008-12-13
-
Date published2009-12-11
Magnetotelluric evidence of deep geodynamic settings at the junction zone of the Southern Tien Shan and Tarim basin
Detailed magnetotelluric and magnetovariation profiling was conducted (40 broadband stations) at the southern 140 km segment of geophysical transect MANAS with the help of MT instruments: MTU-5 (produced by «Phoenix Geophysics Ltd») and MT-24 (produced by EMI Center). MANAS transect extended from south of Kashgar, China, to just south of Bishkek, Kyrgyzstan and crossing the whole Tien Shan orogenic belt in transverse direction of its main ranges strike. We constructed 2D geoelectric model to characterize block-fracture structure at the junction zone of the Southern Tien Shan. There is low resistive inclined zone in the obtained cross-section imaging the underthrusting process of Tarim tectonic sheets under the Tien Shan mountains. Also there are some electrical heterogeneities as indications that young deformations inside Tarim lithospheric block have the whole crust scale.