-
Date submitted2022-05-20
-
Date accepted2023-06-20
-
Date published2024-02-29
Increasing the quality of zeolite-bearing rocks from Eastern Transbaikalia by applying directed energy
This paper presents the use of accelerated electrons to treat zeolite-bearing rocks from Eastern Transbaikalia to increase the efficiency of separating zeolites from rock-forming minerals via electromagnetic separation. The effectiveness of the liberation of zeolite minerals using accelerated electrons was analyzed. The results of dry electromagnetic separation of zeolite-bearing rocks are presented. The dependence of the extraction of iron-bearing minerals from zeolite-bearing rocks by electromagnetic separation on the magnetic field intensity for different particle sizes has been established. The main methods of zeolite-bearing rock enrichment and ore preparation were determined. A technological scheme for processing zeolite-bearing rocks, based on the use of accelerated electron treatment at the ore preparation stage, is presented, significantly improving the zeolite production quality.
-
Date submitted2022-03-22
-
Date accepted2022-11-17
-
Date published2023-02-27
Development of composition and study of sorbent properties based on saponite
The development of a comprehensive approach to preventing the pollution of natural objects is necessary due to the high requirements of environmental legislation for the discharge of industrial wastewater. Adsorbents are used in various industries to extract heavy metals from wastewater. In this study the possibility of using saponite clay as a raw material for the production of sorbent for the extraction of copper ions Cu 2+ from industrial wastewater is considered, a recipe and technology of sorbent production are developed, and its chemical composition is established. It has been established that the optimum temperature for heat treatment of the sorbent and corresponds to 550 ºC, since at this temperature saponite extrudates acquire strength (strength 34.1 kg/mm 2 ) and textural properties (specific surface area of pellets 22.803 m 2 /g), allowing them to be used as sorbents. The kinetics of molecular adsorption was studied using model solutions of copper (II) sulfate. The extraction efficiency of copper (II) ions from the model solutions is 93 %. Extraction efficiency of copper (II) ions from copper plating wastewater reaches 94 %. SEM results confirm the presence of metal on the sorbent surface.
-
Date submitted2022-03-14
-
Date accepted2022-06-20
-
Date published2022-11-10
Model of a walking sampler for research of the bottom surface in the subglacial lake Vostok
Technologies and technical means for investigation of subglacial lakes in Antarctic is a new developing scientific and technical direction, which today has no clearly established methodology. Based on the developed technology of drilling a new access well to lake Vostok and its penetration as well as analysis of existing methods and devices for bottom sediment sampling, a basic model of a sampler with a walking-type mover, capable of moving along different trajectories and operating in a wide technological range, is proposed. The proposed device model is equipped with different actuators for sampling the bottom surface with different physical and mechanical properties. Based on the presented basic model of the walking sampler, a mathematical model of the device was developed, which was based on the theoretical mechanics methods. As a result of conducted research the dependencies were obtained, which allow making a scientifically justified choice of optimal values for geometric and force parameters of the walking sampler. A conceptual design of the walking sampler has been developed, taking into account the mutual location and coupling of its main components, the overall dimensions of the delivery tool, as well as the esthetic component of the device.
-
Date submitted2022-03-17
-
Date accepted2022-10-04
-
Date published2022-11-10
Improving the reliability of 3D modelling of a landslide slope based on engineering geophysics data
Landslides are among the most dangerous geological processes, posing a threat to all engineering structures. In order to assess the stability of slopes, complex engineering surveys are used, the results of which are necessary to perform computations of the stability of soil masses and assess the risks of landslide development. The results of integ-rated geological and geophysical studies of a typical landslide slope in the North-Western Caucasus spurs, composed of clayey soils, are presented. The purpose of the work is to increase the reliability of assessing the stability of a landslide mass by constructing a 3D model of the slope, including its main structural elements, identified using modern methods of engineering geophysics. Accounting for geophysical data in the formation of the computed 3D model of the slope made it possible to identify important structural elements of the landslide, which significantly affected the correct computation of its stability.
-
Date submitted2021-10-08
-
Date accepted2022-01-24
-
Date published2022-04-29
Methodology for thermal desorption treatment of local soil pollution by oil products at the facilities of the mineral resource industry
- Authors:
- Mariya A. Pashkevich
- Marina V. Bykova
The analysis of the main environmental consequences of leaks and local spills of petroleum products at the enterprises of the mineral resource complex is presented. It is established that the problem of soil contamination with petroleum products at the facilities of the mineral resource complex and enterprises of other industries is caused by significant volumes of consumption of the main types of oil products. Based on the results of the author's previous field research, a series of experiments was carried out, consisting in modeling artificial soil pollution with petroleum products such as gasoline, diesel fuel, highly refined oil, motor oil, and transmission oil, followed by their purification by heat treatment at temperatures of 150, 200, and 250 °C. The 250 °C limit of the heating temperature was set due to the need to partially preserve the structure and quality of the soil after heat treatment to preserve its fertility. When the processing temperature rises to 450 °C, all humates are completely burned out and, as a result, productivity is lost. Confirmation is provided by the results of experiments to determine the humus content in uncontaminated soil and soil treated at different temperatures. It was found that at a maximum processing temperature of 250 °C, about 50 % of the initial organic carbon content is preserved. According to the results of the conducted experimental studies, the dependences of the required processing temperature on the concentration of petroleum products to reduce the concentration of petroleum products to an acceptable level have been established. The methodology of thermal desorption cleaning of soils with varying degrees of contamination at enterprises of the mineral resource complex is presented.
-
Date submitted2021-04-23
-
Date accepted2021-09-07
-
Date published2021-12-16
Development of the concept of an innovative laboratory installation for the study of dust-forming surfaces
Currently, the determination of the emission rate of suspended solids from a unit of the surface area of a man-made mass at various parameters of the wind flow is not sufficiently described. The analysis of the world experience of researchers shows that existing laboratory installations have various design features that do not allow to correctly determine the mass of the dust being flapped and wind-blown. Based on the analysis results, the concept of an innovative laboratory installation for the study of dust-forming surfaces has been developed. It takes into account the influence of wind shadows, the deturbulization of an artificially created air flow, the possibility of regulating not only the flow velocity mode, but also the creation of a vacuum or disturbance in the area of sample placement, as well as the formation of a certain angle of wind flow attack relative to the surface. The concept provides for the possibility of determining the volume of dust emissions by the values of the lost dust masses in the sample and by the values of dust concentrations in the outgoing stream. The calculation of the main basic elements of the installation using the ANSYS FLUENT software package was carried out. The model and configuration of the wind tunnel have been developed and calculated, the main geometric parameters and functional elements for the possibility of use in scientific work have been determined. For practical use of the empirical roughness value of the underlying surface, its values are recommended in a wide range – from zero for the water surface to 0.44 for large cities with tall buildings and skyscrapers.
-
Date submitted2018-09-07
-
Date accepted2018-11-08
-
Date published2019-02-22
Assessment of refractory gold-bearing ores based on interpretation of thermal analysis data
- Authors:
- T. N. Aleksandrova
- G. Heide
- A. V. Afanasova
The article presents the results of a study on the possibility to assess refractory gold-bearing ores using thermal analysis data. It studies the flotation concentrates obtained during the enrichment of double refractory sulfide gold-bearing ores. This type of ore is complicated by the fine impregnation of gold in sulphide minerals and the presence of sorption-active scattered carbonaceous matter, which is in close association with sulphides. The results of thermogravimetric and mass spectrometric studies of refractory gold-bearing ores are presented. The obtained fragments for kerogen CH (m/z = 15), C 2 H (m/z = 29) and C 3 H (m/z = 43) indicate the presence of various types of carbonaceous matter in the studied samples. It is justified that the degree of sorption activity of carbonaceous matter depends on the presence of kerogen and bitumen in the ore. High sorption activity of scattered carbonaceous material significantly affects the processing technology of ores and concentrates, both flotation and pyro- and hydrometallurgical methods. Thermogravimetric and mass spectroscopic analyzes can be used to determine the degree of preg-robbing of refractory gold-bearing ores. The obtained results predetermine the direction of creating new methods and technologies in the field of decarburization of refractory gold-bearing ores in the integrated development of solid minerals in the mining regions of Russia.
-
Date submitted2018-09-08
-
Date accepted2018-10-27
-
Date published2019-02-22
Special strategy of treatment of difficulty-profile conical screw surfaces of single-screw compressors working bodies
- Authors:
- A. S. Vasilev
- A. A. Goncharov
The article deals with the problems arising during the shaping of complex profile tapered helical surfaces. These surfaces form the geometry of the working bodies of single-screw miniature compressors, which have great prospects for use in mobile miniature compressor plants, which is especially important for medical and space technology, robotics, oil and gas and mining industries. Due to the fact that the capabilities of existing CAD systems do not allow obtaining three-dimensional models of these surfaces, the problem of preparing a control program for a CNC machine arises, since the calculation of the tool path in CAM systems when processing complex surfaces is impossible without a three-dimensional surface model. To solve the problem, an automated programming system was developed that implements a formalized toolpath calculation in accordance with the proposed special processing strategy for conical helical surfaces. As the initial data for calculating the toolpath, the system needs information about the tool geometry and the helical surface in a parametric form, which makes it possible to abandon the construction of a three-dimensional surface model. The results of processing prototypes for the proposed strategy are given.
-
Date submitted2014-07-12
-
Date accepted2014-08-24
-
Date published2014-12-22
The study of structural features of outburst coal seams
- Authors:
- V. N. Zakharov
- O. N. Malinnikova
A study of the structural features of outburst-dangerous and non-outburst dangerous coal layers was conducted. It was shown that coal taken from a sudden outburst zone has a significantly greater sorption surface than coal from the same layer which was not part of the sudden outburst. The size of the sorption surface of coal is affected by its history up to that point; thus the heating of the coal sample during its preparation enlarges its sorption surface. An electron microscope study of coal surfaces has shown that for coal from outburst-dangerous layers, a disturbed structure with a large quantity of fissures and partings the size of 1 micrometer is typical. Under the same enlargement, a coal structure from safe coal layers is much more uniform. The study of digital images of coal surfaces, taken with the help of an electron microscope, shows that the structural institution of surface elements may be presented by multifractal analysis, with its spectrum of fractal dimensions, which allows us to state quantitative distinctions in coal microstructures for outburst-dangerous layers. Coal from outburst-dangerous layers has a greater set of structural elements, and therefore a spectrum of fractal dimensions that is 1.5-2 times wider than for nonoutburst dangerous layers.
-
Date submitted2009-08-03
-
Date accepted2009-10-30
-
Date published2010-02-01
Geotechnical engineering features of the estimation of stability of heavy constructions of designed cement works in Novorossiysk
- Authors:
- Yu. V. Khaliullina
In the paper possibilities of constructing industrial heavy structures near slopes are described. The influence of tectonics, seismicity, a relief, deposit rocks thicknesses, their physical properties of geotechnical engineering feature are analyzed. The law of marls durability change is established. Positions of the most probable surfaces of sliding in cracked monoclonal deposit thickness are shown. The estimation of stability of the loaded slopes is made. Some recommendations for maintenance of structure stability are given.
-
Date submitted2009-07-20
-
Date accepted2009-09-20
-
Date published2010-04-22
Problematic aspects in rock movement
The paper considers the existing standards in the field of rock movement and protection of engineer constructions from harmful influence of mining operations. It is emphasized the necessity in revision of some standards in compliance with the real mining production.
-
Date submitted2008-10-30
-
Date accepted2008-12-22
-
Date published2009-12-11
Investigations of the mechanism of methane desorption in coal saturation with carbon dioxide
- Authors:
- A. T. Karmansky
The article considers the developed unit for investigations of interaction between coal and gas, and gas outflow from the coal surface by gravimetric method under gas pressure up to 6 MPa. Relationship between the sorption ability and metamorphism stage is explained by the microstructure of coal. The adsorption increment indices of volume V and velocity of changes in pressure P – during adsorption may be used for prediction of outburst-hazard of coal and gas.