-
Date submitted2024-07-28
-
Date accepted2024-11-26
-
Date published2024-12-12
From import substitution to technological leadership: how local content policy accelerates the development of the oil and gas industry
- Authors:
- Oleg V. Zhdaneev
- Ivan R. Ovsyannikov
Achieving technological sovereignty implies accelerating innovation and reducing import dependence. An effective tool for addressing these challenges is local content policy (LCP). The purpose of this study is to assess the impact of LCP on innovation activity in oil and gas companies and to provide recommendations for enhancing the effectiveness of this policy in Russia. The paper analyzes the influence of LCP on innovation levels in the oil and gas sector, drawing on examples from 10 countries. A positive short-term impact of LCP on innovation was identified in Brazil, Malaysia, and Saudi Arabia, with long-term effects observed in China and South Africa. Recommendations for improving the effectiveness of LCP in Russia are supplemented with a methodology for calculating the level of technological sovereignty. A refinement of the method for solving the «responsiveness» problem, incorporating the level of localization, has been proposed.
-
Date submitted2022-10-04
-
Date accepted2024-03-05
-
Date published2024-08-26
Localization and involvement in development of residual recoverable reserves of a multilayer oil field
During waterflooding of a multilayer oil field there is a constant deterioration of the structure and composition of residual reserves due to geological and technological reasons. The largest share of residual reserves is localized in pillars, which arise from uneven development of the production facility and are undrained or poorly drained zones. The results of a quantitative assessment of the distribution of residual oil reserves in the Middle and Upper Devonian deposits of the Romashkinskoe oil field of the Republic of Tatarstan are presented. A retrospective method is proposed to identify reserves by analyzing and summarizing historical exploration data and the long history of reservoir development, and a calculation algorithm is proposed to quantify them. It has been established that residual oil reserves are localized in rows of dividing and injection wells, as well as in the central rows of producing wells in a three-line drive, in abandoned and piezometric wells, in the areas adjacent to the zones of reservoir confluence, pinch-out, oil-bearing contours, distribution of reservoirs with deteriorated porosity and permeability properties. Depending on geological conditions, algorithms for selecting geological and technical measures to include localized reserves in development and forecasting production profiles were proposed. According to the proposed method, residual recoverable reserves were identified and a number of wells were recommended for experimental works on their additional recovery: in well 16 (hereinafter in the text, conventional well numbers are used) after isolation of overlying high-water-cut formations, the additional perforation was carried out and oil flow was obtained. Additional perforation in well 6 resulted in oil recovery during development as well. Thus, the developed approaches to identifying residual recoverable reserves and patterns of their spatial distribution can be recommended in other multilayer oil fields with a long history of development.
-
Date submitted2020-08-03
-
Date accepted2020-12-13
-
Date published2021-06-24
Tectonic and magmatic factors of Li-F granites localization of the East of Russia
- Authors:
- Viktor I. Alekseev
We have investigated tectonic and magmatic factors of Li-F granites localization of the East of Russia. The study is based on the ideas of Far Eastern geologists about the deep structures of intraplate activity. A model of a source structure with mantle heat sources and ore-forming magmatic complexes was used. We carried out a special metallogenic analysis of the East of Russia as applied to the rare metal-tin-bearing formation of subalkaline leucogranites, including Li-F ones. Source structures are the main factor in the tectonic and magmatic development of the East of Russia, localization of ore-forming granites and the formation of rare-metal-tin ore regions. On deep layers of source structures there are areas of the mantle and earth's crust decompaction, heat, magmas and fluids sources, as well as granitoid cryptobatholiths. Relatively large massifs of leucogranites, small intrusions of tin monzonitoids and Li-F granites are concentrated near the modern surface. The source structures correspond to the rank of the ore region. The source structures in the South of the region are: Badzhalskaya, Miao-Chanskaya, Ippato-Merekskaya, Hogdu-Lianchlinskaya, Arminskaya, etc.; in the North: Pevekskaya, Kuiviveem-Pyrkakayskaya, Kuekvun-Ekiatapskaya, Iultinskaya, Telekayskaya, Central Polousnaya, Omsukchanskaya, etc. Three types of ore regions have been identified according to the degree of source structures and Li-F granites erosion. We have also outlined the patterns of source structures evolution and their place in the geological history of ore-bearing granites. A classification of source structures and its comparison with the classifications of regional intrusives and metallogenic subdivisions are proposed. It has been established that, despite the diversity of tectonic, geological and petrological settings in the East of Russia, the intrusions of Li-F granites are regulated by the same tectonic and magmatic factors. The tectonic and magmatic factors of Li-F granites localization in the East of Russia are identified and classified as geophysical, orogenic, geoblock, magmatic, metasomatic and disjunctive.
-
Date submitted2020-06-15
-
Date accepted2020-06-15
-
Date published2020-06-30
Multi-terminal dc grid overall control with modular multilevel converters
This paper presents a control philosophy for multiterminal DC grids, which are embedded in the main AC grid. DC transmission lines maintain higher power flow at longer distances compared with AC lines. The voltage losses are also much lower. DC power transmission is good option for Russian north. Arctic seashore regions of Russia don't have well developed electrical infrastructure therefore power line lengths are significant there. Considering above it is possible to use DC grids for supply mining enterprises in Arctic regions (offshore drilling platforms for example). Three different control layers are presented in an hierarchical way: local, primary and secondary. This whole control strategy is verified in a scaled three-nodes DC grid. In one of these nodes, a modular multilevel converter (MMC) is implemented (five sub-modules per arm). A novel model-based optimization method to control AC and circulating currents is discussed. In the remaining nodes, three-level voltage source converters (VSC) are installed. For their local controllers, a new variant for classical PI controllers are used, which allow to adapt the values of the PI parameters with respect to the measured variables. Concerning the primary control, droop control technique has been chosen. Regarding secondary level, a new power flow technique is suggested. Unbalance conditions are also verified in order to show the robustness of the whole control strategy.
-
Date submitted2019-01-03
-
Date accepted2019-03-23
-
Date published2019-06-25
Normalization of thermal mode of extended blind workings operating at high temperatures based on mobile mine air conditioners
Thermal working conditions in the deep mines of Donbass are the main deterrent to the development of coal mining in the region. Mining is carried out at the lower technical boundaries at a depth of almost 1,400 m with a temperature of rocks of 47.5-50.0 °C. The air temperature in the working faces significantly exceeds the permissible safety standards. The most severe climatic conditions are formed in the faces of blind development workings, where the air temperature is 38-42 °С. It is due to the adopted coal seam mining systems, the large remoteness of the working faces from the main air supply openings, the difficulty in providing blind workings with a calculated amount of air due to the lack of local ventilation fans of the required range. To ensure thermodynamic safety mine n.a. A.F.Zasyadko we accepted the development of a draft of a central cooling system with ground-based absorption refrigerating machines with a total capacity of 9 MW with the implementation of the three types of generation principle (generation of refrigeration, electrical and thermal energy). However, the long terms of design and construction and installation work necessitated the use of mobile air conditioners in blind development faces. The use of such air conditioners does not require significant capital expenditures, and the terms of their commissioning do not exceed several weeks. The use of a mobile air conditioner of the KPSh type with a cooling capacity of 130 kW made it possible to completely normalize the thermal working conditions at the bottom of the blind workings 2200 m long, carried out at a depth of 1220-1377 m at a temperature of host rocks 43.4-47.5 °С. It became possible due to the closest placement of the air conditioner to the face in combination with the use of a high-pressure local ventilation fan and ducts, which ensured the air flow produced by the calculated amount of air. The use of the air conditioner did not allow to fully normalize the thermal conditions along the entire length of the blind face but reduced the urgency of the problem of normalizing the thermal regime and ensured the commissioning of the clearing face.
-
Date submitted2017-11-22
-
Date accepted2018-01-04
-
Date published2018-04-24
Justification of a methodical approach of aerologic evaluation of methane hazard in development workings at mines of Vietnam
- Authors:
- V. V. Smirnyakov
- Nguen Min' Fen
The methods of evaluation of the aerological conditions to be performed for the purpose of normalization of mining conditions are provided in the present review; the location of possible accumulations of explosive gases during the drift of the development workings are taken into account. To increase the safety of the development working regarding the gas factor, a complex evaluation of a working was developed with respect to the dynamics of methane emission and air coursing along the working which is strongly affected by the character of the leakages from the ventilation ducting. Thereby, there occurs a necessity of the enhancement of a methodical approach of calculation of ventilation of a working which consists in taking into consideration a total aerodynamic resistance of the booster fan including the local resistances of the zones of the working. An integer simulation of the gas-air flows realized on the basis of a software package FLowVision allows to evaluate a change in the methane concentration in the zones of local accumulations.
-
Date submitted2010-07-13
-
Date accepted2010-09-16
-
Date published2011-03-21
Database development real estate rural municipalities
- Authors:
- V. G. Gorelikov
- E. Yu. Ionova
For rural settlements in Russia today is characterized by poor living conditions, their ac- complishment should be engaged in local government. However, the system of land registration at the municipality does not perform all assigned to municipal functions. We develop a system of indicators of land records, which is implemented using MS Access.
-
Date submitted2010-07-16
-
Date accepted2010-09-15
-
Date published2011-03-21
Assessment of land in rural settlements
- Authors:
- E. Yu. Ionova
Cadastral valuation of lands held at the state level for all categories of land, but its results are irrelevant for the solution of management tasks by local authorities in rural areas. Some examples of model land evaluation of rural settlements at the level of the municipality using the expert method, the rank correlation test and K-Link-Welles, and add MS Excel «Search solutions».
-
Date submitted2009-09-01
-
Date accepted2009-11-09
-
Date published2010-06-25
Thermal, power and economic parameters of innovative technology of development of nearsurface geothermal deposits
- Authors:
- E. I. Boguslavskiy
Deficiency of organic fuel and necessity of protection of environment cause growth of rates of development practically inexhaustible, everywhere widespread and ecologically pure geothermal resources. For needs of a heat supply especially actively developing innovative technology of development of near-surface geothermal resources has great value. Operative mining of the production schedules containing optimum parametres and indicators PSGT is necessary for designing and building of near-surface systems of a geothermal heat supply (PSGT). The imitating economic-mathematical model is developed, the algorithm and the program of their optimisation are created. Computer calculations for a wide range of natural, power and economic conditions are carried out. Key parametres and indicators PSGT are defined. Their optimum values for a heat supply of local consumers (apartment houses) in the conditions of the Yaroslavl area are recommended.
-
Date submitted2009-07-18
-
Date accepted2009-09-30
-
Date published2010-04-22
Account of stress gradients in rock mass in designing of mining constructions
- Authors:
- S. V. Suknyov
- M. D. Novopashin
Using the gradient approach the criteria of shear and tensile cracking are developed in compression under conditions of stress concentrations near mine workings. Considering the size effect, a function type of local strength is determined, expressions for critical pressure are derived and comparison between analytical and experimental data is performed.