Submit an Article
Become a reviewer
Vol 230
Pages:
197-203
Download volume:
RUS ENG
Article

Justification of a methodical approach of aerologic evaluation of methane hazard in development workings at mines of Vietnam

Authors:
V. V. Smirnyakov1
Nguen Min' Fen2
About authors
  • 1 — Ph.D. associate professor Saint-Petersburg Mining University
  • 2 — Ph.D. researcher Institute of Mining Science and Technology
Date submitted:
2017-11-22
Date accepted:
2018-01-04
Date published:
2018-04-24

Abstract

The methods of evaluation of the aerological conditions to be performed for the purpose of normalization of mining conditions are provided in the present review; the location of possible accumulations of explosive gases during the drift of the development workings are taken into account. To increase the safety of the development working regarding the gas factor, a complex evaluation of a working was developed with respect to the dynamics of methane emission and air coursing along the working which is strongly affected by the character of the leakages from the ventilation ducting. Thereby, there occurs a necessity of the enhancement of a methodical approach of calculation of ventilation of a working which consists in taking into consideration a total aerodynamic resistance of the booster fan including the local resistances of the zones of the working. An integer simulation of the gas-air flows realized on the basis of a software package FLowVision allows to evaluate a change in the methane concentration in the zones of local accumulations.

Область исследования:
(Archived) Geoecology and occupational health and safety
Keywords:
aerodymanicsofunventilated blindworkings explosiveness local methaneaccumulation methaneconcentration intersection of workings aerodynamic resistance numerical simulation
10.25515/pmi.2018.2.197
Go to volume 230

Similar articles

Peculiarities of formation and growth of nanodispersed intermetallic strengthening inclusions in rapidly-solidified alloys of Al–Mg–Zr–X-system
2018 D. I. Budelovskii, S. Yu. Petrovich, V. A. Lipin
Use of nano-dimensional hydrophobic coatings for obtaining electrets based on silicon dioxide
2018 N. S. Pshchelko
Sulfidization of silver-polymetallic ores of «Goltsovoe» deposit for decreasing loss of silver in mill tailings
2018 L. V. Shumilova, O. S. Kostikova
Improvement of the procedure of recruitment of personnel for hazardous work environment
2018 N. D. Tskhadaya, D. Yu. Zakharov
Innovative technology of large-size products manufacture
2018 S. N. Sanin, N. A. Pelipenko
Theoretical aspects of the technical level estimation of electrical engineering complexes
2018 S. V. Kolesnichenko, O. V. Afanaseva