-
Date submitted2024-04-09
-
Date accepted2024-06-03
-
Date published2024-07-04
Analysis of the geochemical barriers effectiveness as the basis for the use of nature-like water purification technologies
Nature-like technologies are being introduced into many human activities including mining wastewater treatment. This work is based on long-term studies of the Sibay copper-zinc-pyrite deposit development. It is dedicated to assessment of geochemical barriers effectiveness in Cu, Zn, Cd removal from water of the Karagayly River (receiving quarry and dump drainage water). The research is based on the elements’ content and forms in water and bottom sediments, pH values etc. Four types of hydrogeochemical environment (formed due to changes in the water use over the past 20 years) were distinguished using discriminant analysis. The mechanisms of barriers formation and destruction were described. Statistical modeling of the metals’ precipitation was performed by multivariate regression analysis. Cu is adsorbed by recently formed Fe hydroxides, and, to a lesser extent, precipitates with sulfates as water pH increases. Antagonism to Mn hydroxides has been demonstrated, due to different physicochemical conditions for their precipitation. Zn enters solid phase mainly with sulfates, this element also forms its own mineral phases. The second mechanism is adsorption by recently formed Mn hydroxides, which corresponds to the idea of similar conditions for the precipitation of metal hydroxides. Cd behavior reflects conditions intermediate between these of Cu and Zn. Contribution of both mechanisms (related to Fe hydroxides and aqueous sulfates) is equal. Antagonism to Mn is absent. According to the assessment results using of nature-like technologies in situ in watercourses, canals and other water drainage systems is promising. Developed statistical models can be used for needs of experimental studies and artificial geochemical barriers engineering.
-
Date submitted2024-04-22
-
Date accepted2024-06-13
-
Date published2024-07-04
Comprehensive utilization of urban wastewater sludge with production of technogenic soil
The article presents the analysis of the existing approach to wastewater sludge treatment and justifies the selection of the most promising management technology that allows maximum use of wastewater sludge resource po-tential. To obtain a useful product (biocompost) suitable for use as part of technogenic soil, experimental studies of aerobic stabilization of organic matter of dehydrated urban wastewater sludge with the addition of other waste by using passive composting technology were carried out. The technology is included in the list of best available technologies (BAT). The selection of the most optimal components for the mixture was based on the results of determining the C and N content, humidity and pH of the components used that ensured the composting of organic waste. The results of laboratory studies of the obtained biocompost according to the main agrochemical and sanitary-epidemiological indicators are presented. Testing was carried out according to the criterion of toxicity of the biocompost’s aqueous extract. The assessment of the technogenic soil was performed when using biocompost in its composition for compliance with existing hygienic requirements for soil quality in the Russian Federation. Based on the results of the vegetation experiment, optimal formulations of the technogenic soil were determined, i.e., the ratio of biocompost and sand, under which the most favorable conditions for plant growth are observed according to a combination of factors such as the number of germinated seeds, the maximum height of plants and the amount of biomass. The conducted research makes it possible to increase the proportion of recycled urban wastewater sludge in the future to obtain soils characterized by a high degree of nutrient availability for plants and potentially suitable for use in landscaping, the biological stage of reclamation of technogenically disturbed lands, as well as for growing herbaceous plants in open and protected soil.
-
Date submitted2022-09-30
-
Date accepted2023-02-13
-
Date published2023-04-25
Hydrogeoecological conditions of technogenic groundwater in waste disposal sites
The specific hydrogeoecological conditions of aquifers of some technogenic formations, mainly iron ore skarn-magnetite and titanium-magnetite formations, are considered. The resulting wastes, which are stored in waste disposal sites during development of deposits, due to the impact of a number of factors (natural and technogenic) form technogenic waters. Waste disposal facilities are complex engineering structures (dumps and sludge storages), which in turn create their own hydrogeoecological conditions, which must be investigated in order to prevent and minimize environmental and economic damage caused by these objects to the aquatic environment. The paper presents long-term field and laboratory studies of the aquatic environment under the influence of a waste disposal facility in the Middle Urals – one of the largest tailings, representing a potential environmental and man-made hazard. This tailing dump contains tens of tons of waste – enrichment tailings and creates specific hydrogeoecological conditions on the territory. Based on many years of monitoring studies, an analysis of these conditions was carried out – the quality of groundwater affected by the tailings was assessed. It is shown that groundwater is of technogenic nature, i.e. are man-made waters that have a significant impact on the surface and underground hydrospheres of the territory.
-
Date submitted2020-10-26
-
Date accepted2021-07-28
-
Date published2021-10-21
Investigation of the influence of the geodynamic position of coal-bearing dumps on their endogenous fire hazard
The paper investigates the hypothesis according to which one of the factors influencing the spontaneous combustion of coal-bearing dumps is its geodynamic position, i.e. its location in the geodynamically dangerous zone (GDZ) at the boundary of the Earth crust blocks. This hypothesis is put forward on the basis of scientific ideas about the block structure of the Earth crust and the available statistical data on the location of burning dumps and is studied using computer modeling. A dump located in the area of Eastern Donbass was chosen as the object of research. The simulation results show that the penetration of air into the dump body from the mine through the GDZ, which crosses the mining zone, is possible at an excess pressure of 1000 Pa created by the main ventilation fans. The fire source appearance in the dump body causes an increase in the temperature of the dump mass and becomes a kind of trigger that "turns on" the aerodynamic connection between the dump and the environment, carried out through the GDZ. It is concluded that the establishment of an aerodynamic connection between the mine workings and the dump through the GDZ can be an important factor contributing to the endogenous fire hazard of coal-bearing dumps. The simulation results can be used in the development of projects for monitoring coal-bearing dumps and measures to combat their spontaneous combustion.
-
Date submitted2019-03-11
-
Date accepted2019-05-06
-
Date published2019-08-23
Estimation Method for Vector Field Divergence of Earth Crust Deformations in the Process of Mineral Deposits Development
- Authors:
- B. T. Mazurov
- M. G. Mustafin
- A. A. Panzhin
An essential requirement for effective and safe deposit development is good geomechanical software. Nowadays software packages based on finite element method are used extensively to estimate stress-strain state of the rock mass. Their quality use can only be assured if boundary conditions and integral mechanical properties of the rock mass are known. In mining engineering this objective has always been achieved by means of experimental observations. The main source of information on initial and man-induced stress-strain state of the rock mass is natural measurement of displacement characteristics. Measurement of geodetic data (coordinates, heights, directions) in the period between alteration cycles allows to plot a field of displacement vectors for the points in question. Taken together, displacement vectors provide information on the objective stress-strain state of the Earth crust. Basing on it, strain tensors, displacement components, directions and rates of compression and tension can be calculated in the examined area. However, differential characteristics of any physical vector field – namely, curl and divergence – need to be taken into account. Divergence is a single value (scalar) associated with a single point. Vector field as a whole can be described with divergence scalar field. Divergence indicates the sign (positive or negative) of volume changes in the infinitesimal region of space and characterizes vector flux in the nearest proximity and in all directions from a given point. In the paper authors propose a method to estimate divergence using discrete geodetic observations of displacement occurring on the surface of examined territory. It requires construction of formulas that model vector field for any point of the area. It is proposed to use power polynomials that describe displacement in three directions (x, y, z). These formulas allow to estimate field vectors in any given point, i.e. to form vector tubes. Then areas of input and output cross-section, as well as divergence values are calculated. This increases the quality of geodetic observation and provides opportunities for more precise modeling of the rock mass disrupted by mining operations, using modern software packages.
-
Date submitted2016-09-15
-
Date accepted2016-11-07
-
Date published2017-02-22
Open-pit mining of lignin waste storage
- Authors:
- A. V. Mikhailov
The purpose of this paper is to develop performance criteria for fleet selection in surface mining of lignin as a raw material for factory-made fuel. The East Siberian Biotechnical Plant (ESBP) proposes to close the Lignin Waste Storage (LWS) at Tulun, Irkutsk Region of Russia. The LWS is a 9.6 ha facility used for the long-term storage of hydrolysis lignin and some fly ash. The project provided whole-year open-pit mining of lignin storage with one mining ledge within 3 years. Productivity – 1500 t/day or 447 000 t/year. Excavated lignin will be stockpile on the Pellet Plant territory for later processing. Part of this closure effort would involve constructing an artificial reservoir on the place of LWS. The objectives of this project were as follows: determine equipment needs and develop optimal procedures for the lignin excavation and transportation. Lignin moving may include site preparation, excavation, transportation and road surfacing. Lignin excavation is conduct by using techniques similar to those used for open-pit mining of peat. For this project, the excavator is the most important piece of equipment required for lignin removal and handling. The mining process consist of excavating the lignin (using Kraneks ЕК-270LC) and hauling it to pellet plant via six off-road tractors&semitrailers (John Deere 7730& ISON-8520).
-
Date submitted2014-10-20
-
Date accepted2014-12-24
-
Date published2015-08-25
Improving the technology of open-cast mining using surface miners and spreaders
- Authors:
- A. Yu. Cheban
The article is devoted to the issues of improving the efficiency of open-cast mining of solid minerals. Surface miners are effective and promising mining equipment that brought a large number of innovative technological solutions to the mining industry. The flow sheet of mining an overburden bench of high altitude with boom surface miners and the improved spreader is presented. Application of technical and technological improvements will significantly increase the productivity of mining equipment, reduce the cost of doing stripping operations and improve the profitability of the mining industry in the development of deposits of solid minerals, semi-indurated rocks.
-
Date submitted2014-07-20
-
Date accepted2014-09-18
-
Date published2014-12-22
Use оf renewable energy sources in the coal industry
- Authors:
- A. V. Limanskii
- M. A. Vasileva
There are three fundamental basic documents in energy conservation and energy efficiency today: the Energy Strategy in the period up to 2030; the Federal Law «On energy-saving and energy efficiency and in amending particular legislative acts of the Russian Federation»; and the State Energy Conservation and Energy Efficiency Program in the period up to 2020. In recent years, the upward trend in the use of renewable energy sources (RES) is becoming all the more evident. Until recently, the development of energy has seen a clear pattern: the areas of energy which have developed most are those which have a quite fast direct economic effect. The social and environmental impacts associated with these areas were considered only as incidental, and their role in decision-making was negligible. With this approach, we considered RES only as a future energy source, when traditional energy sources have been exhausted, or when obtaining them becomes extremely expensive and timeconsuming. The primary driver behind the intensive development of RES has been public pressure based on environmental concerns, rather than economic calculations about the future. The economic potential of the world’s renewable energy is currently estimated at 20 billion tons of oil equivalent per year, which is twice the annual output of all fossil fuels. This fact shows us the path of energy development in the near future. In this paper, on the basis of the laws of the Russian Federation, renewable energy in the coal industry is considered. We describe the experience and prospects of the use of mine water and burning rock dumps.
-
Date submitted2013-07-26
-
Date accepted2013-09-22
-
Date published2014-03-17
Parameters of removing the overburden for deposits complex structure of carbonate rocks
- Authors:
- V. V. Ivanov
The main features of the development of Open-complex structure of carbonate rocks. The dependence for the determination of dozing on the domestic heap career, moving overburden on bestransportnoy scheme in goaf. Found that the optimum length of excavator block executed by one parking dragline at quarries carbonate rocks is achieved with the minimum total cost of doing the work of overburden and waste associated with the removal of the overburden.
-
Date submitted2013-07-29
-
Date accepted2013-09-13
-
Date published2014-03-17
Water economic recultivation of sandy opencasts in Leningrad region as the complex way of decision of region’s environmental problems
- Authors:
- S. V. Kovshov
- M. M. Yakubovskii
- V. P. Kovshov
One of the most perspective recultivation directions of the fulfilled sandy open-cast mines is water economic. There of working out of new more simple and economic projects water economic recultivation is required, thus capable in a complex to solve various geoenvironmental problems. The short review of the basic existing recultivation directions the fulfilled sandy open-cast mines is given. The water economic direction in which the special accent becomes on designing of fire reservoirs is in more details analyzed.
-
Date submitted2013-07-01
-
Date accepted2013-09-01
-
Date published2014-03-17
Studying of the overgrowth mechanism dumps overburden breeds in climatic conditions of northern regions
- Authors:
- V. S. Kuznetsov
In this work the mechanism of overgrowth dumps overburden breeds in climatic conditions of northern regions is considered. Conditions influencing formation of «pioneer» vegetable communities in territories broken by open mining operations are analyzed.
-
Date submitted2010-07-21
-
Date accepted2010-09-23
-
Date published2011-03-21
Engineering-geological substantiation of reshaping wave-built solid masses with partial removal of hydraulic mine dump
- Authors:
- I. V. Kuznetsova
- V. P. Zharikov
Consider the case of partial removal of hydraulic mine dump in the Kuzbass region in connection with the need to retrieve from under him mothballed coal reserves. The results of geotechnical studies alluvial array: the physical and mechanical properties of alluvial rock and measurement of pore pressure in them. The problems of research and some methodological techniques. We settle the question of creating a new sustainable construction is part of the hydraulic mine dump.
-
Date submitted2010-07-24
-
Date accepted2010-09-17
-
Date published2011-03-21
Features technology of modelling waste bank phosphite by results to laser-scanning survey
- Authors:
- M. Yu. Vasiliev
Features of a technique of lazer – scanning survey of waste bank and processing of its re- sults are stated. The estimation of accuracy of survey is executed and the constructed three- dimensional model on which define geometrical parameters for an estimation of stability of highwall slope.