-
Date submitted2024-05-28
-
Date accepted2024-11-07
-
Date published2024-12-25
Methods of intensification of pipeline transportation of hydraulic mixtures when backfilling mined-out spaces
The paper presents an analysis of the advantages and limitations of additional measures to intensify the transportation of the backfill hydraulic mixture flow. The results of the analysis of the conditions for using pumping equipment to move flows with different rheological properties are shown. Generalizations of the methods for influencing the internal resistance of backfill hydraulic mixtures by means of mechanical activation, as well as increasing fluidity due to the use of chemical additives are given. The article presents the results of studies confirming the feasibility of using pipes with polymer lining, which has proven its efficiency in pumping flows of hydraulic mixtures with different filler concentrations. An analytical model of hydraulic mixture movement in the pipeline of the stowage complex has been developed. The trends in pressure change required to ensure the movement of hydraulic mixture in pipelines of different diameters are exponential, provided that the flow properties are constant. The effect of particle size on the motion mode of the formed heterogeneous flow, as well as on the distribution of flow density over the cross-section, characterizing the stratification and change in the rheological properties of the backfill hydraulic mixture, is assessed. An analytical model of centralized migration of the dispersed phase of the hydraulic mixture flow is formulated, describing the effect of turbulent mixing of the flow on the behavior of solid particles. An assessment of the secondary dispersion of the solid fraction of the hydraulic mixture, which causes a change in the consistency of the flow, was performed. The studies of the influence of the coefficient of consistency of the flow revealed that overgrinding of the fractions of the filler of the hydraulic mixture contributes to an increase in the required pressure in the pipeline system.
-
Date submitted2023-08-02
-
Date accepted2023-12-27
-
Date published2024-04-25
Justification of the approaches to improve management strategy of the mining system based on the analysis of data on the mining of complex structural rock blocks
Long-term activity of mining enterprises causes the necessity to substantiate the strategies of management of the mining and technical system functioning in terms of improvement of ore quality control, which is determined by its change in the course of field development due to the priority development of the main reserves and, as a consequence, forced transition to the mining of complex structural rock blocks with a decrease in the recovery percentage, which is typical in case the ore component meets the requirements of the feasibility study in terms of grade at substandard capacity. In this case, it is possible to identify the recovery percentage and the potential for its increase by analyzing the long-term activity of the mining and industrial enterprise, namely, by analyzing the data of mining complex structural rock blocks with the subsequent establishment of the relationship between the primary data on mining and geological conditions and information on the quality of the mineral obtained from the technological equipment. Therefore, the purpose of the research was to substantiate the necessity of improving the management strategy of the mining-technical system functioning, which consists in the fact that on the basis of analyzing the mining data of complex structural rock blocks it is possible to determine the ore mass losses and their quantity and to lay the basis for the development of decisions on its extraction. For this purpose, the collected data on the mining of complex structural rock blocks, accounting the geological and industrial type of extracted ores, were considered in modeling the conditions and studying the parameters of technological processes, the implementation of which provides additional products. It was revealed that the ore mass from substandard thickness layers is delivered to the dumps, and ore mass losses have been estimated at 25-40 % per year. It is proved that determination of ore mass losses based on the analysis of data on mining of complex structural rock blocks, as well as timely solution of this issue can significantly increase the production efficiency of mining and technical system. Taking into account for the results obtained, the options for optimizing the production of the mining and engineering system were proposed.
-
Date submitted2021-10-14
-
Date accepted2022-04-07
-
Date published2022-04-29
The influence of the shape and size of dust fractions on their distribution and accumulation in mine workings when changing the structure of air flow
The results of the analysis of statistical data on accidents at Russian mines caused by explosions in the workings space have shown that explosions of methane-dust-air mixtures at underground coal mines are the most severe accidents in terms of consequences. A detailed analysis of literature sources showed that in the total number of explosions prevails total share of hybrid mixtures, i.e. with the simultaneous participation of gas (methane) and coal dust, as well as explosions with the possible or partial involvement of coal dust. The main causes contributing to the occurrence and development of dust-air mixture explosions, including irregular monitoring of by mine engineers and technicians of the schedule of dust explosion protective measures; unreliable assessment of the dust situation, etc., are given. The main problem in this case was the difficulty of determining the location and volume of dust deposition zones in not extinguished and difficult to access for instrumental control workings. Determination of the class-shape of coal dust particles is a necessary condition for constructing a model of the dust situation reflecting the aerosol distribution in the workings space. The morphological composition of coal mine dust fractions with dispersion less than 0.1 has been studied. Particle studies conducted using an LEICA DM 4000 optical microscope and IMAGE SCOPE M software made it possible to establish the different class-shapes of dust particles found in operating mines. It was found that the coal dust particles presented in the samples correspond to the parallelepiped shape to the greatest extent. The mathematical model based on the specialized ANSYS FLUENT complex, in which this class-form is incorporated, is used for predicting the distribution of explosive and combustible coal dust in the workings space. The use of the obtained model in production conditions will allow to determine the possible places of dust deposition and to develop measures to prevent the transition of coal dust from the aerogel state to the aerosol state and thereby prevent the formation of an explosive dust-air mixture.
-
Date submitted2020-06-15
-
Date accepted2020-06-15
-
Date published2020-06-30
Description of steady inflow of fluid to wells with different configurations and various partial drilling-in
- Authors:
- Valery A. Iktissanov
There are many equations of steady inflow of fluid to the wells depending on the type of well, presence or absence of artificial or natural fractures passing through the well, different degrees of drilling-in of the wellbores. For some complex cases, analytical solutions describing the inflow of fluid to the well have not yet been obtained. An alternative to many equations is the use of numerical methods, but this approach has a significant disadvantage – a considerable counting time. In this regard, it is important to develop a more general analytical approach to describe different types of wells with different formation drilling-in and presence or absence of fractures. Creation of this method is possible during modeling of fractures by a set of nodes-vertical wells passing from a roof to floor, and modeling of a wellbore (wellbores, perforation) by a set of nodes – spheres close to each other. As a result, based on this approach, a calculation algorithm was developed and widely tested, in which total inflow to the well consists of the flow rate of each node taking into account the interference between the nodes and considering the impermeable roof and floor of the formation. Performed modeling confirmed a number of known patterns for horizontal wells, perforation, partial drilling-in of a formation, and also allowed solving a number of problems.
-
Date submitted2020-06-15
-
Date accepted2020-06-15
-
Date published2020-06-30
Multi-terminal dc grid overall control with modular multilevel converters
This paper presents a control philosophy for multiterminal DC grids, which are embedded in the main AC grid. DC transmission lines maintain higher power flow at longer distances compared with AC lines. The voltage losses are also much lower. DC power transmission is good option for Russian north. Arctic seashore regions of Russia don't have well developed electrical infrastructure therefore power line lengths are significant there. Considering above it is possible to use DC grids for supply mining enterprises in Arctic regions (offshore drilling platforms for example). Three different control layers are presented in an hierarchical way: local, primary and secondary. This whole control strategy is verified in a scaled three-nodes DC grid. In one of these nodes, a modular multilevel converter (MMC) is implemented (five sub-modules per arm). A novel model-based optimization method to control AC and circulating currents is discussed. In the remaining nodes, three-level voltage source converters (VSC) are installed. For their local controllers, a new variant for classical PI controllers are used, which allow to adapt the values of the PI parameters with respect to the measured variables. Concerning the primary control, droop control technique has been chosen. Regarding secondary level, a new power flow technique is suggested. Unbalance conditions are also verified in order to show the robustness of the whole control strategy.
-
Date submitted2019-06-29
-
Date accepted2019-08-25
-
Date published2019-12-24
New technical solutions for ventilation in deep quarries
- Authors:
- S. G. Shakhrai
- G. S. Kurchin
- A. G. Sorokin
The paper discusses the issues of ventilating in deep quarries caused by the intensification of blasting operations at great depths, the increased distance of ore truck transportation to the daylight area, constant change in the geometrical parameters of the quarry, its microrelief and direction of mining, and increased isolation of the mined space from the environment. We provide a brief analysis of the current tools for forced airflow in deep quarries, which showed that the use of forced ventilation is often challenging since it leads to high energy consumption, high level of noise exceeding the permissible parameters, and high speeds of forced air flows may blow the dust off the quarry surfaces. The article presents methods and tools developed at the Siberian Federal University for intensifying the natural airflow in deep quarries by changing the air density at the entrance and exit points of the pit, as well as heating the shady areas using mirrors and solar energy, which do not interfere with mining and blasting operations.
-
Date submitted2017-12-27
-
Date accepted2018-03-22
-
Date published2018-06-22
Mathematical model of heat exchange processes for heat ptotective cooling suit of a rescuer
- Authors:
- V. R. Alabev
- G. V. Zavyalov
Fires are followed by the range of factors hazardous for human health; a radiant thermal stream accompanied by the high temperature of the environment is one of these factors. For protection of firemen special protective clothing from heat impact and the insulation type clothing are used. The paper demonstrates that the concept of action of such clothing is based on the passive heat protection owing to the use of materials with low conducting capacity or high specific heat. The time of effective protection of a suit is not considerable which reduces the duration of work under the unfavorable climatic conditions drastically, increases the work labor input, leads to the hyperthermia. One of the ways focused on the improvement of the heat protective clothing is a design of suits with cooling, which is stated in the paper. The paper shows that the developed heat protective suits on the basis of water-ice cooling elements are not widely used due to considerable costs. A more reasonable idea refers to the design of heat protective suits with cooling by using running water as the most available coolant circulating along polyvinylchloride pipes arranged between the layers of a suit.
-
Date submitted2016-09-14
-
Date accepted2016-10-28
-
Date published2017-02-22
Formation and development of theoretical principles for mineral resources logistics
- Authors:
- B. K. Plotkin
- M. M. Khaikin
Market transformations in Russia became foundations for formation and development of a new scientific and practical field in economics – logistics. Out of more than 30 existing definitions of logistics the authors according to their opinion have chosen the most appropriate. Logistics of mineral resources should be attributed to production (industrial) logistics. It is a proven fact that processes of supply chain management in mining industry and its infrastructure in the framework of mineral resources chain have some fundamental distinctions. Importance of material resources recycling in theory and practice of mineral resources logistics has been highlighted. Special features of merchandise assortment and classifications in the mining industry have been examined in conjunction with substantial contents of material flow. Special consideration has been given to relevant issues in the field of price formation for mining produce, in the view of specific relations between its costs and logistic procurement of the industry. Moreover, questions of inventory control in the mining industry, activity of commodity exchanges, management of mining logistics system have been addressed.
-
Date submitted2016-09-08
-
Date accepted2016-11-18
-
Date published2017-02-22
Plume tectonics – myth or reality?
- Authors:
- Yu. I. Daragan-Sushchov
The paper is dedicated to the role of mantle plumes in the formation of large igneous provinces. From different regions of the world facts are mentioned that contradict key points of plume tectonics. Closer attention is paid to classical volcanic provinces on Hawaiian islands and in Iceland, as well as to Siberian and Deccan Traps, oceanic plateau Ontong Java, Central Atlantic magmatic province, Alfa and Mendeleev Ridges in the Arctic Ocean. A conclusion is drawn that plumes are a special case of mantle-lithospheric flows, which according to deep geophysics are often located horizontally which leaves out their plume origin. Heated masses of mantle substance under young volcanic regions or rift zones of mid-ocean ridges do not emerge from the depth in the form of a straight column, but rather have arbitrary shapes, skewing to the sides and having outgrowths, offshoots, spherical bulges. Vertically rising flows of hot magma (plumes) are not a cause, but an effect of a lithospheric split and rise of magmatic substance due to decompression. A conclusion is made that it is unproductive to exaggerate the shapes and sizes of plumes and use them to explain all the diversity of endogenous processes.
-
Date submitted2015-10-23
-
Date accepted2015-12-19
-
Date published2016-08-22
Nondestructive techniques to control the quality and quantity of oil flows
- Authors:
- R. M. Proskuryakov
- A. V. Kopteva
The article considers the issue of improving the efficiency of exploiting the acting oil fields and transportation system on the basis of modern hi-tech technologies to control the extracted and transported material. Factors are studied that lower the reliability of oil flow measurements, both qualitatively and quantitatively, the main ambiguities are described of using current systems for metrological account of oil transported through the pipelines. The effect is studied of inclusions in the transported oil flow on measurement efficiency. A technique is suggested for selective measurements of separate phases in the complex multi-phase flows with isotropic radio emission, the principal relationships are presented to describe the intensity of direct and scattered gamma-radiation on flow parameters. Criteria are given for developing a measurement system that would control the actual component composition of the flow with time, hence the amount of oil transported; that would enable organizing a centralized open department to control the quality of oil and transportation conditions, upgrade the level of production and provide high measurement accuracy. Results are presented of testing the technique on an operating oil field; the relative error margin of measuring free gas content was 0.2 %. The range is reviewed of possible applications for the measurement system of multi-phase multi-component flows, developed in the Saint Petersburg Mining University.
-
Date submitted2015-10-24
-
Date accepted2015-12-17
-
Date published2016-08-22
Spatial distribution of energy release during propagation of fast electron beam in the air
- Authors:
- V. S. Sukhomlinov
- A. S. Mustafaev
The paper focuses on development of the analytical theory to assess spatial distribution of energy released during propagation of the fast electron beam in a gas, in particular in the air at electron energies of 1-100 keV. An approach adopted by authors [2, 3] to study inelastic deceleration of electrons in the air is further developed here. As the inelastic interaction in most cases leads to energy relaxation while elastic interaction causes distribution isotropization over directions, the first task solved in the paper is finding the electron distribution function including only elastic collisions. In the final part of this paper an analytical solution to this task is presented with account of both types of electron deceleration in the air. The calculations show that when elastic collisions are taken into account this leads to increased spatial density of energy release and to narrowing of the primary energy release region of the fast electrons, as compared to calculations accounting for only inelastic deceleration.
-
Date submitted2015-10-19
-
Date accepted2015-12-27
-
Date published2016-08-22
Key directions in processing carbonaceous rocks
- Authors:
- T. N. Aleksandrova
Mathematical statistics techniques and the data from laboratory mineral and technological studies of samples were used to identify the most common natural and technological associations of microelements in carbonaceous rocks which could be of industrial value if extracted in the form of commercial products. The discovered structures of spheroidal and ring ferrocarbonaceous clusters are respective formations of the class of metal fullerens with expressed magnetic properties. Such clusters may serve as construction blocks for new magnetic structures since each of them is a separate magnetic domain. Extracting such structures and their practical use opens the way to future technologies. It is expected to employ such results in the future in the course of designing new techniques and technologies for benefication of carbonaceous raw materials while developing comprehensively solid mineral resources in the mining industry regions of Russia.
-
Date submitted2015-08-19
-
Date accepted2015-10-17
-
Date published2016-04-22
Development of institute of financial control in construction
- Authors:
- V. P. Grakhov
- O. L. Chazova
The article is devoted to the complex research of development of Institute of financial control in construction. Based on the analysis of approaches of researchers to definition of concept «financial control», sets out its objectives and importance. Identifies and describes the characteristic features of state and non-state financial control. To examine the existing mechanisms of financial control system in construction in General, to prevent violations and to create the basis for the adoption of specific management decisions, it is proposed to study three main areas. Special attention is paid to the analysis of the current legislation in the field of formation of financial control in the construction and practice of its application. Presents substantial changes in the legal regulation of the contract system in the sphere of procurement for state and municipal needs, including the adjustment of the scheme of carrying out of competitive procedures by the customer. In this regard, an important role plays the method of calculation of the final rating of participants of procurement procedures, allowing to determine the winner in accordance with predetermined criteria and their weighting factors. This area is also complemented by the consideration of issues related to the establishment of the procedure for the implementation of banking support contracts, allowing to provide the customer more effective control over the observance of contractual obligations with suppliers (contractors, performers). The conducted researches allow to draw a conclusion about the need to rethink and address issues related to efficiency of use of budget investments in objects of capital construction. In this regard, the main priorities of improving financial control in the construction industry to achieve the desired rates of economic development.
-
Date submitted2014-11-01
-
Date accepted2015-01-22
-
Date published2015-10-26
Project finance for strategic investment projects of mining corporations
- Authors:
- T. V. Ponomarenko
- N. A. Belitskaya
A strategic project realization in large companies leads to long-term competitive benefits, but is very costly, has high risks and complicated structural arrangement. Long payback period, high debt and risk burden result in the necessity to use project finance facilities. The research aims to find out conditions and justify the possibility of the use of project finance in Russian mining companies in terms of the new legal framework. Characteristics of projects requiring the use of project finance are determined. The article clarifies the principles and definition of project finance. Specific risks and realization problems of project finance in the Russian context are analyzed. A comparison between the Russian legal framework of project finance and regulation in foreign countries is made; examples and problems in the Russian project finance practice are shown. The results can be used by mining companies for justification of the optimal financial strategy for major investment projects realization.
-
Date submitted2010-07-14
-
Date accepted2010-09-07
-
Date published2011-03-21
Substantiation of pumped volumes of flow angularity compositions in injection wells
- Authors:
- A. R. Mavliev
- M. K. Rogachev
- D. V. Mardashov
The method of calculation pumped volumes of flow angularity compositions in injection wells, which based on combination of the seepage theory, laboratory investigation and field experience is developed.
-
Date submitted2009-09-26
-
Date accepted2009-11-21
-
Date published2010-06-25
The measurements of emission parameters of tungsten thermo cathodes in plasma energetic equipments
Emission parameters and coefficients of reflection of heat electrons from tungsten thermo cathodes were investigated under nontraditional for emission electronic conditions, when the surface contacts with highly ionized plasma. For measurements plasma diode electron current-magnetic field strength relations were used. Parameter Dj, which characterizes cathode heterogeneity by work function, and coefficient of reflection for policrystallic tungsten and for face 110 tungsten single crystal were measured. Proportion entering in effective reflection coefficient of electrons, reflected immediately from the surface and from potential barrier of spots field was determinate.
-
Date submitted2009-09-06
-
Date accepted2009-11-10
-
Date published2010-06-25
Diagnostic method for measurements of emission parameters of thermoemission cathodes
- Authors:
- A. S. Mustafaev
This article deals with the diagnostic method of emission parameters of thermo emission cathodes by the transverse magnetic field. The knudsen Cs-Ba-diode with the surface ionization are investigated.
-
Date submitted2009-09-19
-
Date accepted2009-11-15
-
Date published2010-06-25
Potassium chloride content in ore and products оf recycling automatic control system
- Authors:
- S. S. Galushkin
- B. A. Vishnyak
- V. N. Smirnov
Potassium chloride percentage in continuous transported ore flows and products of potassium plants recycling automatic control system is offered and described. It differs fundamentally from used before ones at bulk solids containing natural radio-activity elements effective constituents producing and recycling plants. Sensing device is used in this information-measuring system (IMS). It allows to realize automatic control in flows for that instantaneous productivity fluidity in wide limits is resided. Using such IMS gives considerable economic effect by measurements error lowering and their quickness increase.
-
Date submitted2009-09-26
-
Date accepted2009-11-14
-
Date published2010-06-25
Automatic bulk solids moisture in stream control system
- Authors:
- S. S. Galushkin
- B. A. Vishniak
- V. N. Smirnov
Automatic moisture in fine-dyspersated stream control system based on microwave frequency method is presented. Minimizing means of interrupting factors peculiar to this method of measurement are produced and systematically proved.
-
Date submitted2009-08-07
-
Date accepted2009-10-14
-
Date published2010-02-01
Calculation of material streams of the pirometallurgical cycle of processing of copper sulphidic raw materials
- Authors:
- N. V. Danilova
The technology pirometallurgical a cycle of processing of copper sulphidic materials is considered. The technology includes autogenous fusion in furnaces Vanjukova, converting copper steins and copper refinement. The primary goals of drawing up of model and the accepted assumptions are described. The equations of system of model are balance expressions for each of material streams. Expressions for calculation of material streams pirometallurgical a cycle of processing of copper sulphidic raw materials are found.