Substantiation of pumped volumes of flow angularity compositions in injection wells
About authors
- 1 — post-graduate student Saint Petersburg State Mining Institute (Technical University)
- 2 — Ph.D., Dr.Sci. professor Saint Petersburg State Mining Institute (Technical University)
- 3 — Ph.D. assistant Saint Petersburg State Mining Institute (Technical University)
Abstract
The method of calculation pumped volumes of flow angularity compositions in injection wells, which based on combination of the seepage theory, laboratory investigation and field experience is developed.
Область исследования:
(Archived) Development of oil and gas deposits
Keywords:
flow angularity compositions
filtration
residual flow resistance factor
bulk volume factor of injection
emulsion composition
Funding:
None
References
- Basniev K.S. Reservoir hydromechanics / K.S.Basniev, N.M.Dmitriev, R.D.Kanevskaya. M.-Izhevsk: Computer research institute, 2006. 488 p.
- Basniev K.S. Oil and gas mechanics / K.S. Basniev, N.M. Dmitriev, G.D. Rosenberg. M.-Izhevsk: Computer research institute, 2003. 480 p.
- Rogachev M.K. Prevention of troubles during oil recovery / M.K.Rogachev, K.S.Strizhnev Moscow: Nedra, 2006. 295 p.
- Strizhnev K.S. Well repair and isolation works: Theory and practice. Saint Petersburg:: Nedra, 2010. 560 p.
Similar articles
Usage of simulation modeling for planning and interpretation experimental-filtrational works when prospecting solid mineral product deposit
2011 S. N. Kotlov, K. E. Volodchenko
Basic requirements for shallow seismic field works technique by the reflected waves method for engineering-geological issues solving
2011 A. N. Telegin, A. S. Yakovlev