-
Date submitted2023-07-31
-
Date accepted2024-11-07
-
Date published2025-02-25
Environmental assessment of biochar application for remediation of oil-contaminated soils under various economic uses
- Authors:
- Tatiana V. Minnikova
- Sergey I. Kolesnikov
Remediation is an important area of oil-contaminated soil restoration in Russia, since oil refining industry is the major one for Russia and neighbouring countries, and the issues of environmentally effective and economically profitable remediation of oil contamination have not yet been solved. Soils under various economic uses have different surface areas and degrees of soil particles envelopment with oil due to the presence or absence of cultivation, the amount of precipitation and plant litter. The introduction of various substances for remediation into oil-contaminated soils of steppes (arable land), forests, and semi-deserts, considering their differences, gives different results. Biochar is coal obtained by pyrolysis at high temperatures and in the absence of oxygen. The uniqueness of this coal lies in the combination of biostimulating and adsorbing properties. The purpose of the study is to conduct an environmental assessment of biochar application for remediation of oil-contaminated soils under various economic uses. The article compares the environmental assessments of biochar application in oil-contaminated soils with different particle size fraction. The following indicators of soil bioactivity were determined: enzymes, indicators of initial growth and development intensity of radish, microbiological indicators. We found that the most informative bioindicator correlating with residual oil content is the total bacteria count, and the most sensitive ones are the roots length (ordinary chernozem and brown forest soil) and the shoots length (brown semi-desert soil). The use of biochar on arable land and in forest soil (ordinary chernozem and brown forest soil) is less environmentally efficient than in semi-desert soil (brown semi-desert soil). The study results can serve to develop measures and managerial and technical solutions for remediation of oil-contaminated soils under various economic uses.
-
Date submitted2017-09-17
-
Date accepted2017-11-06
-
Date published2018-02-22
Collaborative interpretation of the data obtained by resistivity and ground penetrating radar methods for assessing the permeability of sandy clay soils
- Authors:
- D. A. Lalomov
- V. V. Glazunov
A method for estimating the filtration factor of sandy clay soils is considered on the basis of a joint interpretation of the data of a set of methods of engineering electrical exploration, including electrical resistivity tomography and ground penetrating radar studies. The solution of this problem is based on the use of known empirical connections between the imaginary and real parts of the complex dielectric permittivity, specific electrical resistance, and Q factor. An example of the effective joint use of the ground penetrating radar and non-contact electrical resistivity tomography shows how to obtain qualitative and quantitative estimates of a changing filtration factor in a draining road layer. It is necessary to use precise engineering geological information in order to provide the required estimates. The proposed approach makes it possible to describe continuous profiles of a pavement and underlying layers by ground penetrating radar and electrical resistivity tomography, as well as to assess soil properties when conducting an electrical survey from the surface of asphalt concrete pavement. Recommendations for the implementation of the developed methods of complex engineering and geophysical research are given for solving issues of repair work design, supervision, and quality control of road construction.
-
Date submitted2017-09-03
-
Date accepted2017-11-04
-
Date published2018-02-22
Development of sensorless vector control system for permanent magnet synchronous motor in Matlab Simulink
- Authors:
- V. Ya. Frolov
- R. I. Zhiligotov
In last 20 years segment of electric drives with permanent magnet synchronous motors has increased. This type of motors has better technical characteristics compared to induction motors, but has problems in actual implementation, one of which is the requirement of rotor position data. It is possible to implement with use of sensors or without them by means of motor state observer. The paper describes problems of sensorless vector control system for permanent magnet synchronous motors. The vector control system with state observer for permanent magnet synchronous motors is described. Synthesis of sliding mode observer for rotor speed and position is presented. The algorithm is implemented by development of model in Matlab Simulink environment with support by Texas Instruments processors support blocks. Experimental comparison of results of rotor angle state calculation and the data obtained by rotor position sensors was conducted. Research objective is a development of control algorithm, which has required precision for calculation of rotor start angle, high range of speed regulation and resistance to drift of motor parameters.
-
Date submitted2013-07-20
-
Date accepted2013-09-20
-
Date published2014-03-17
Interchamber pillars partial working off technology at the floor-and-chamber system of development of the Korobkovsky deposit of KMA
- Authors:
- E. I. Boguslavskii
- M. N. Andreev
Article is devoted to a choice of rational technology of mining of part of stocks interchamber pillars at floor-and-chamber system of development of the Korobkovsky deposit of KMA. Authors carried out calculations and comparison of technical and economic parameters of two offered technologies of mining: horizontal layers with a stowing in an ascending order with application of a portable equipment and horizontal layers with a stowing in an ascending order with a driving of autobiases in interpanel pillars. For a choice of method of development for mining of part of interchamber pillar and determination of its parameters and indicators.
-
Date submitted2009-10-21
-
Date accepted2009-12-26
-
Date published2010-09-22
Modeling of geomechanical processes in mining the steeply pitching ore bodies of rockburst-hazardous deposits
The article contains the results of numerical modeling of stress-strain state in constructive elements of mining systems, applied at hazardous and prone to rook bursts deposits of the Far-East. Consideration is given to some stated regularities of forming of teсhnogenic stress field and geomechanical processes proceeding in rock mass of minable deposits which allow to substantiate a сomplex of measures for prevention of dynamic rock pressure manifestations.
-
Date submitted2009-09-22
-
Date accepted2009-11-23
-
Date published2010-06-25
Scientific-technical progress and innovation development in sociological science history
- Authors:
- V. N. Zavrazhin
The paper is dedicated to the consideration of interrelation of scientific-technical progress and social progress as one of the most important subjects of sociological science. Some classical and modern macrosociological theories are in the centre of attention, that develop progressive approach in understanding the place and role of scientific-technical progress and innovation development in the life of society. The emphasis is made on the actualization of macrosociological analysis of the problems stated in the paper in the current global economic crisis context.
-
Date submitted2009-09-08
-
Date accepted2009-11-05
-
Date published2010-06-25
Some peculiarities of written translation
- Authors:
- M. A. Ivanova
The paper studies some difficulties and peculiarities of training skills of written translation. An attempt is made to classify these difficulties according to psychological mechanisms and translating activity.
-
Date submitted2009-09-28
-
Date accepted2009-11-07
-
Date published2010-06-25
Particularities of interpretation and written translation of technical mining articles
- Authors:
- Y. E. Murzo
- L. G. Kirakozova
The paper gives the definition of interpretation and written translation into the foreign language, linguistic and grammar particularities as well as difficulties in translation of technical mining articles. Explanatory examples are given.
-
Date submitted2009-09-15
-
Date accepted2009-11-15
-
Date published2010-06-25
Innovative changes in scientific text comprehension as a foundation of information source
- Authors:
- I. V. Maltsev
The article analyzes variants of innovative text understanding approach. Any text is not just a new portion of some concrete information encoded with a help of certain language means (lexical, grammar, syntactical), but also a complete mental-language situation. Possibility of its complex understanding becomes real only when a multisided approach is applied. Such approach must be based on all data specter alongside with such fields of knowledge as the humanity pertaining semiotics, philological hermeneutics and theory of text inclusion. Problems appearing when understanding of structural, compositional, stylistic and other text peculiarities is being taken place are revised.
-
Date submitted2009-08-13
-
Date accepted2009-10-30
-
Date published2010-02-01
Reducing losses ore between whole chamber for the design of lower layers mine by Gubkin of open joint-stock company «Industrial complex KMAruda»
- Authors:
- E. I. Boguslavskiy
- P. V. Korzhavykh
Technological decisions on decrease in losses of ore in between chamber walls are considered at designing of the bottom horizons of mine of Gubkin. It is offered two variants of decrease in losses of the ore technologically compatible with each other for their simultaneous use. Results of calculation of losses of ore and economic consequences are resulted. The basic actions which are necessary for carrying out, before introduction of technological decisions in manufacture are described.
-
Date submitted2009-08-13
-
Date accepted2009-10-29
-
Date published2010-02-01
Analysis of statistical data of lecture of the alloyed steels
- Authors:
- R. V. Kurtenkov
Influence of a chemical compound on the carbon contents in a steel is analysed, in the course of processing of month basic data the mathematical model is received, it is offered optimum significances of source parametres at the carbon contents in a steel.
-
Date submitted2009-07-04
-
Date accepted2009-09-10
-
Date published2010-04-22
Provision of safe coal mining with due account оf cleanup works at adjacent seams
- Authors:
- M. A. Ilyashov
During planning of mining works with coal series it is important to take into consideration mining conditions of each mine layer, to determine presence of natural and technogenic abnormal areas at its place and to appreciate their potential level of influence on the increase of rock pressure manifestations in the development and productive workings. In comparable conditions the most negative manifestations of rock pressure can be observed in roadways of neighboring low layer, when they are disposed in range of mutual action of abnormal areas of natural and technogenic origins.
-
Date submitted2009-07-20
-
Date accepted2009-09-24
-
Date published2010-04-22
Methods for presetting of artificial yielding to anthracite pillars
- Authors:
- S. G. Stradanchenko
- N. V. Titov
- Yu. V. Turuk
The article contains the results of in situ investigation of influence of yielding pillars on the stability of protected workings with different modes of preset yielding. Graphs of roof movements in the workings protected with yielding pillars, are given.
-
Date submitted2008-10-30
-
Date accepted2008-12-10
-
Date published2009-12-11
Electrical fields structure characteristics in tardanskii gold mineralization zone (the Republic of Tyva)
- Authors:
- A. N. Orekhov
The study of golden ore deposits is rather complicated problem. The main ways to rise effectiveness of these studies are improving methods of analyzing physical fields’ structure and finding connections between their morphology, zoning and golden ore bearing. The materials of studying of Tardanskoe golden ore cluster using electroprospecting methods, analysis of these investigations and conclusions, based on the results of this analysis are presented in this article.