-
Date submitted2023-05-19
-
Date accepted2024-03-05
-
Date published2024-08-26
Development and research of backfill compounds with improved elastic and strength properties for oil and gas well lining
This article describes operations from the well construction cycle where the cement rock behind the casing is subjected to dynamic action (impacts of the drill stem during drilling and normalization of the cement sleeve, secondary drilling operations, hydraulic fracturing, etc.). The developed cement mortar compositions were tested following API 10B-2, API 10B-6, API STD-65-2, and GOST 28985-91 standards. The composition of the cement system without the use of imported components (CM-5) was developed, which improved elastic and strength properties compared to existing industry solutions. An improvement in the elastic and strength features and technological properties of cement rock when using epoxy resins was identified, the optimal composition of the cement-and-epoxy grout was determined, and the internal structure of the formed backfill rock, its permeability, and porosity were studied.
-
Date submitted2022-05-20
-
Date accepted2023-04-03
-
Date published2024-02-29
Impact of carbon dioxide on the main geotechnical quality criteria and preparation cost of cemented paste backfill
There is a global upsurge in the use of cemented paste backfill (CPB) for various mining functions. However, the cost of the Portland cement binder is prohibitive, thus warranting strategies to reduce cement usage without overly diminishing the CPB quality. Since carbon dioxide is used for patented sand moulding processes, this study is premised on that physicochemical ability of CO2 to enhance the curing of consolidated inorganic materials. It evaluated the impact of carbon dioxide on the uniaxial compressive strength UCS and preparation cost of CPB standard samples (ASTM C109). The preparation cost was delimited to the purchase cost of the Portland cement. The backfill material was silica sand tailings with 4.5 wt.% Portland cement binder and a water-cement ratio of 7.6. Distilled water of pH 5.4 was used for the control samples while variable amounts of carbon dioxide were dissolved in distilled water to generate carbonated mixing water with pH values of 3.8; 4 and 4.2. The lower the carbonated water pH, the higher is the CO2 concentration. UCS tests were conducted on the samples after curing for 3, 7, 28, and 90 days. There was an observable increase in the UCSs and reduction in curing time with increasing carbon dioxide. Samples prepared with carbonated water of pH 3.8 had almost double the strength of those prepared with pure distilled water of pH 5.4, implying that more dissolved CO2 corresponds to higher CPB strength. This is supported by the trendline equations for the graphical simulation of strength on curing time. Thus, CPB with much less binder can be expected to attain the requisite UCS if carbon dioxide is incorporated. The average reduction in Portland cement consumption was 0.61 %, which translates to a cost saving of the same percentage points. If calculated over the operational life of a mine, this is a massive saving of millions of dollars.
-
Date submitted2022-10-17
-
Date accepted2023-02-13
-
Date published2023-04-25
Environmental geotechnology for low-grade ore mining with the creation of conditions for the concurrent disposal of mining waste
Due to the constantly deteriorating environmental situation in the regions with mining enterprises, the article considers the topical issue of disposing the maximum possible volume of waste from the mining and processing of low-grade ferrous ores through the creation of an effective underground environmental geotechnology. Traditional procedure with descending mining of reserves with a caving system does not allow waste to be disposed of in a gob. The idea is to use geotechnology based on the ascending order of mining the ore body, room excavation, leaving truncated pillars, and staggered arrangement of adjacent rooms in height, which makes it possible to form containers for waste disposal in the form of a cementless backfill. The main characteristics of the proposed procedure are investigated and compared with the traditional procedure of low-grade iron ores mining. It was established that from the point of view of the complete extraction of reserves and the unit costs for the preparatory-development operations, the processes are comparable, while in terms of the mining quality, the proposed option is much more efficient. Evaluation of environmental geotechnology by the criterion of waste disposal, performed according to the proposed methodology, showed that the combination of these technical solutions ensures the placement in the formed gob from 80 to 140% of all waste generated during the mining and beneficiation of low-grade iron ores.
-
Date submitted2019-07-09
-
Date accepted2019-09-26
-
Date published2020-04-24
Development of mathematical models to control the technological properties of cement slurries
Oil and gas producing enterprises are making increasingly high demands on well casing quality, including the actual process of injection and displacement of cement slurry, taking into account requirements for the annular cement level, eliminating possible hydraulic fracturing, with developing a hydraulic cementing program. It is necessary to prevent deep invasion of cement slurry filtrate into the formation to exclude bridging of productive layers. It is impossible to fulfill all these requirements at the same time without application of modifying additives; complex cement compositions are being developed and applied more often. Furthermore, need to adjust cement slurries recipes appears for almost every particular well. In order to select and justify cement slurries recipes and their prompt adjustment, taking into account requirements of well construction project, as well as geological and technical conditions for cementing casing strings, mathematical models of the main technological properties of cement slurries for cementing production casing strings in the Perm Region were developed. Analysis of the effect of polycarboxylic plasticizer (Pl) and a filtration reducer (fluid loss additive) based on hydroxyethyl cellulose (FR) on plastic viscosity (V), spreadability (S) and filtration (F) of cement slurries is conducted. Development of mathematical models is performed according to more than 90 measurements.
-
Date submitted2019-05-14
-
Date accepted2019-07-05
-
Date published2020-04-24
Development of spacer fluids and cement slurries compositions for lining of wells at high temperatures
Article is devoted to creation of new compositions of process solutions for lining of directional wells at high temperatures. Developed compositions provide high durability characteristics of cement stone. It is shown that with an increase in packing density of cementing slurry components durability characteristics increase and porosity and permeability of cement stone decrease, whereas an increase in temperature and pressure leads to a significant increase in compressive and bending durability, which is associated with presence of quartz in them. It has been established that introduction of special structure-forming additives to the composition of developed cementing solutions allows formation of sedimentation-resistant cement systems that can provide an increase in durability characteristics of cement stone and, in general, quality lining of directional wells. Study of rheological properties of developed cementing compositions showed that the systems have high yield strength at increased temperatures and pressures. Developed compositions of water-based spacer fluids increase the cleansing degree for both casing and rocks surfaces from mud and clay cake residues, which improves the cementing quality of oil and gas wells. Mechanism for increasing the washing ability of spacer fluids and durability characteristics of cement stone, depending on composition and properties of their constituent components, is disclosed.
-
Date submitted2018-11-20
-
Date accepted2019-01-14
-
Date published2019-04-23
Low-density cement compositions for well cementing under abnormally low reservoir pressure conditions
- Authors:
- N. I. Nikolaev
- E. L. Leusheva
The paper considers variants of lightweight cement compositions with additives of various substances, such as clay components, ash systems, silica additives, kerogen, gilsonite, microspheres, as well as the process of cement slurry aeration. Recommendations on the use of compositions in different conditions are presented. A decrease in the density of the solution is achieved not only due to the low density of the materials used, but also as a result of an increase in the water-cement ratio. In such conditions, it is not possible to ensure the formation of a durable and impermeable cement stone in the well, which creates high quality inter-reservoir insulation. The characteristics of the physical and mechanical properties of existing lightening additives are given, which allows determining the most rational conditions for the use of cement slurries for improvement of the well cementing quality.
-
Date submitted2018-05-14
-
Date accepted2018-07-15
-
Date published2018-10-24
Experience of Integrated use of gold-bearing raw material in the production of precious metals
- Authors:
- V. V. Zhmurova
- N. V. Nemchinova
With the depletion of rich gold-bearing ores, the processing started to use polymetallic ores, which, in addition to precious metals, contain other elements that could be valuable after recovery. The problem of using such ores is extremely difficult because of the high cost of recovery of associated valuable components. The paper presents the results of studies on the integrated use of extracted gold-bearing raw materials based on the example of the Berezitovoye deposit (Amurskaya oblast), they have low content of precious metals and many heavy non-ferrous metals (copper, lead). Experimental work was carried out to obtain copper by the method of cementation from solutions formed after the leaching of the impurities of gold-containing cathode deposits with hydrochloric acid. The cementing metal was iron turnings (waste products of the turning shop of the enterprise). Next, it was proposed to use cemented copper as a collector during re-melting of slags – wastes of processing of low-grade polymetallic ores containing precious metals. The authors obtained ingots of alloyed gold with gold weight fraction of 16 %, which meets the requirements of TU 117-2-7-75 on the content of non-ferrous metals. During hydrochloric acid treatment of cathodic deposits silver partially passed into the solution, it was recovered together with cemented copper and, in subsequent melting, passed into alloyed gold. Thus, the method proposed by the authors helps to reduce the content of precious metals in the «incomplete production cycle» of the gold recovery factory. The opportunity of selling the cementation copper at the enterprises specializing on manufacturing of jewels is shown; the expected economic effect at the same time amounted to more than 1.8 million rubles.
-
Date submitted2018-01-15
-
Date accepted2018-02-28
-
Date published2018-06-22
About the role of hydrafed calcium carboaluminates in improving the technology of complex processing of nephelines
- Authors:
- V. M. Sizyakov
- V. N. Brichkin
The scientific justification and development of the method for industrial synthesis of complex aluminates of alkaline earth metals is an innovative solution that determined several directions in the development of technology for complex processing of nepheline raw materials. It ensures the production of high-quality metallurgical alumina, the effective utilization of nepheline sludge and production of new types of multipurpose by-products. The modern development of these technical solutions is associated with ensuring the energy efficiency of the synthesis of hydrafed calcium carboaluminates (HCCA) and increasing the level of purification of aluminate solutions. The conditions for synthesizing HCCA with the use of calcareous materials of natural and technogenic origin have been experimentally determined, which makes it possible to isolate the average particle diameter as one of the determining factors of this process. The effect of the turnover of the hydrogarnet sludge on the removal of kinetic limitations in the process of deep desalination of aluminous solutions is theoretically justified. The conditions of a two-stage dosage of HCCA are experimentally determined. It is shown that the optimum ratio of the amount of the reagent supplied in the first and second stages is about 3: 2. At the same time, the maximum degree of precipitation of silica provides the production of aluminate solutions with a silicon module at the level of 95,000, which is achieved by using a HCCA synthesized based on chemically precipitated calcium carbonate in the processing of wastes from the production of mineral fertilizers.
-
Date submitted2015-08-25
-
Date accepted2015-10-24
-
Date published2016-04-22
The modern technology of drilling and casing of well during the exploration of gas hydrates
- Authors:
- N. I. Nikolaev
- Lyu Tyanle
In the paper, the perspectives of exploration and completion of gas hydrate fields and the drilling problems in the gas hydrates of the northwest china are studied. It has been established, that the main reasons of complications in the Muli field are the secondary hydrate formation on the walls of the well and drilling assembly and ice formation inside the set cement during the well drilling and completion in permafrost. It has been shown, that in the areas with permafrost during the drilling of the layers containing gas hydrates, temperature and pressure changes can lead to the dissociation of hydrates. At the same time, pressure increase in the annular space due to the gas release, can lead to the secondary formation of gas hydrates, drill string stuck, ceasing of drilling fluid circulation, which is the reason of serious trouble in the wellbore. The results of the research on the development of drilling fluids compositions, which lower the drilling troubles of permafrost, are presented. Comparative experiments have been conducted to evaluate the effectiveness of thermodynamic and kinetic inhibitors, which prevent the repeated hydrate formation. It has been established, that the kinetic inhibitors have the clear advantage: they have good inhibiting effects even with low amounts of additives. In the laboratory conditions, the researches have been conducted to evaluate the phase equilibrium of gas hydrates during their reaction with the water solutions, containing kinetic inhibitor PVP. A thin clay drilling mud has been developed on the water base, providing the holding of the temperature in the level of –2 °С and its effectiveness for the gas hydrate fields in the PRC has been shown. Casing effectiveness of unstable rocks during the drilling in the conditions of negative temperatures inside the well largely depends on their physical-mechanical properties, composition and the technical indicators of cement materials. The authors suggest the composition of quick-setting cements based on aluminum binding materials. It has been established, that the analyzed compositions have the ability to considerably improve the results of cementing.
-
Date submitted2015-07-14
-
Date accepted2015-09-27
-
Date published2016-02-24
Chemical and technological mechanisms of a alkaline aluminum silicates sintering and a hydrochemical sinter processing
- Authors:
- V. M. Sizyakov
Complex mineral raw material, as alkali aluminum silicates, is an interest for aluminum industry, chemical industry and for the production of constructional materials. They are well represented in the earth's crust, characterized by the complexity of material composition and variable content of the main components such as alumina, silica and alkalies. They often occur where due to the geological conditions there is no bauxite, for instance, in the United States, Canada, Venezuela, Mexico, Iran, Egypt, Portugal, Spain, Bulgaria and other countries. At the present time for the Russian economy the nephelines from this list are the most valuable and have the great concern for the raw materials balance of the national aluminum industry. Because of limited reserves the bauxites proportion of alumina produced from nephelines by sintering is 40 % and in time this proportion will increase due to the involvement in the production of new deposits of alkali aluminum silicates. Many of foreign companies have also shown interest to the complex processing of ores. The investigation of technology is based on the method of sintering ore with limestone. As a result, the after-sintering mixture consists of alkali metal aluminates and dicalcium silicate; after-sintering mixture is leached by circulating alkaline aluminate solution, alumina, soda and potash are thrown out from the solution. Dicalcium silicate (nepheline sludge) is processed to Portland. For the investigated after-sintering mixture the tendency shows the increasing of optimum sintering temperature with the lowering Al 2 O 3 content. With the increasing of silicate module (SiO 2 / Al 3 O 3 ) of the initial alkali aluminum silicates charges the temperature of after-sintering mixture formation increases. After-sintering mixtures that are on base of alkali aluminum silicates have different microstructure and the degree of crystallization in which b-С 2 S and sodium aluminate is improved with a decrease of the aluminate phase amount. Results of investigations show a very limited solubility of aluminate phase in dicalcium silicate, which theoretically justifies a sufficiently high level of useful components chemical extraction in the processing of different types of alkali aluminum silicates by sintering.
-
Date submitted2009-08-05
-
Date accepted2009-10-26
-
Date published2010-02-01
The influence of change in geotechnical engineering and geoenvironmental conditions during the process of building and operation of constructions of projected Alekseevsky cement factory on their stability (Mordovia Republic)
- Authors:
- K. V. Pankratova
The influence of change engineering-geological and geoenvironmental conditions on stability of cement factory are considered in this paper. Influence of additional humidifying, rise in temperature in the basis of constructions and activization of microbic activity is considered. The specificity of physicomechanical properties of silica rock and upper Jurassic clay is considered. Results of experimental researches of increase in microbic mass in soils at watering and heating are resulted. The estimation influences of temperature on deformation ability soils is given.
-
Date submitted2009-08-06
-
Date accepted2009-10-10
-
Date published2010-02-01
Allocation of tellurium from difficult on structure of sulfuric acid solutions
- Authors:
- S. B. Fokina
As the main source of reception of tellurium serve electrolytic copper refinery slimes. In the conditions of manufacture expansion and transition on technology decopperizing slimes by pressure leaching O 2 -H 2 SO 4 media, the solution (decopperized product) becomes the basic concentrator of tellurium. Extraction of tellurium from a decopperized (pressure-leached) liquid products is considered. The method allows to raise percent of extraction of tellurium from initial raw materials and to enrich pressure-leached solid product with precious metals.