Submit an Article
Become a reviewer
JOURNAL IMPACT FACTOR
2.8
WEB OF SCIENCE
citescore
9.0
scopus

Vol 77

Previous
Vol 76
Article
  • Date submitted
    1977-10-12
  • Date accepted
    1977-12-08
  • Date published
    1978-04-01

Optimal load distribution during the drying of concentrate at concentrating plants

Article preview

In many concentrating plants, for example, during the beneficiation of iron ores, it is possible to regulate the mass flow rate of the cake (load) entering the drying units. The article proposes an algorithm for the optimal distribution of load between the units — rotary drum dryers — for the derivation of which a mathematical model of such drying, obtained earlier, was used.

How to cite: Deitch V.G., Stalsky V.V., Storozhenko S.V. Optimal load distribution during the drying of concentrate at concentrating plants // Journal of Mining Institute. 1978. Vol. 77. p. 3-7.
Article
  • Date submitted
    1977-10-03
  • Date accepted
    1977-12-14
  • Date published
    1978-04-01

On the boundaries of applicability of the searchless method of optimizing beneficiation processes

Article preview

The problem of optimizing the static regime for a number of the most important mineral beneficiation processes can be reduced to a linear programming problem. ...

How to cite: Zlatkin V.I. On the boundaries of applicability of the searchless method of optimizing beneficiation processes // Journal of Mining Institute. 1978. Vol. 77. p. 8-11.
Article
  • Date submitted
    1977-10-05
  • Date accepted
    1977-12-18
  • Date published
    1978-04-01

Self and mutual capacitance of “point” electrodes in the presence of a dielectric layer

Article preview

Let a spherical conductor of radius r be placed at a distance d from a plane-parallel layer of thickness a with dielectric constant ε, or a capacitor consisting of two such conductors located at a distance l from each other. Let us consider the problem of determining the self (first case) and mutual (capacitor) capacitance of such a system (second case).

How to cite: Krichevsky E.S., Deitch V.G., Terekhov V.P. Self and mutual capacitance of “point” electrodes in the presence of a dielectric layer // Journal of Mining Institute. 1978. Vol. 77. p. 12-17.
Article
  • Date submitted
    1977-10-19
  • Date accepted
    1977-12-17
  • Date published
    1978-04-01

Resolving ability of automated thermovacuum moisture meters

Article preview

The thermovacuum method of moisture measurement is based on the temperature change of a thin sample layer in the process of desorption of moisture in a vacuum. A sample of finely dispersed material is spread in a thin layer into a cuvette, the bottom of which serves as a flat thermosensitive element (TSE). ...

How to cite: Volchenko A.G. Resolving ability of automated thermovacuum moisture meters // Journal of Mining Institute. 1978. Vol. 77. p. 18-21.
Article
  • Date submitted
    1977-10-18
  • Date accepted
    1977-12-01
  • Date published
    1978-04-01

On the estimation of the parameters of mathematical models of technological processes

Article preview

One of the most promising classes of mathematical models of production processes of complex structure, for example, the production processes of mineral processing, is structural models represented by systems of nonlinear equations. ...

How to cite: Zlatkin V.I., Ryzhii P.P., Makovsky A.N., Gorelik A.K., Steinman E.E. On the estimation of the parameters of mathematical models of technological processes // Journal of Mining Institute. 1978. Vol. 77. p. 22-23.
Article
  • Date submitted
    1977-10-04
  • Date accepted
    1977-12-11
  • Date published
    1978-04-01

A method for measuring the weight of a load in a dump truck using a built-in weighing device

Article preview

One of the ways to determine the weight of the load directly in the dump truck is a combined measurement of the pressure in the cavities of the rear cylinders of the pneumohydraulic suspension and in the pressure line of the cylinders of the platform-lifting mechanism during unloading of the dump truck. ...

How to cite: Semenov M.A. A method for measuring the weight of a load in a dump truck using a built-in weighing device // Journal of Mining Institute. 1978. Vol. 77. p. 24-29.
Article
  • Date submitted
    1977-10-25
  • Date accepted
    1977-12-24
  • Date published
    1978-04-01

Method of measuring the resistance of the filtering layer of a vacuum filter when studying it as an object of automatic control

Article preview

When creating a mathematical model of the process of filtration in a drum vacuum filter for the purpose of its automation, difficulties arise associated with the lack of methods for the experimental determination of the resistance of the cake and filter partition. ...

How to cite: Tsai A.G. Method of measuring the resistance of the filtering layer of a vacuum filter when studying it as an object of automatic control // Journal of Mining Institute. 1978. Vol. 77. p. 30-34.
Article
  • Date submitted
    1977-10-21
  • Date accepted
    1977-12-27
  • Date published
    1978-04-01

A capacitive-thermal moisture meter for bulk beneficiation products

Article preview

High-frequency moisture meters have been successfully used to measure the moisture content of a number of beneficiation products. However, when measuring the moisture content of bulk materials having low Q-factor (e.g., metal-containing filter cakes), difficulties arise in developing circuits that allow the measurement of the electrical capacitance of the material under low Q-factor conditions. ...

How to cite: Krichevsky E.S., Terekhov V.P. A capacitive-thermal moisture meter for bulk beneficiation products // Journal of Mining Institute. 1978. Vol. 77. p. 35-39.
Article
  • Date submitted
    1977-10-29
  • Date accepted
    1977-12-02
  • Date published
    1978-04-01

On one variant of the thermophysical method of measuring the moisture content of bulk beneficiation products

Article preview

The electrophysical characteristics of beneficiation products entering mining and processing plants from different deposits are, as a rule, heterogeneous. It is obvious that with such a difference in dielectric constant and electrical conductivity of moist charges, high-frequency moisture control is ruled out.

How to cite: Krichevsky E.S., Terekhov V.P., Galushkin S.S. On one variant of the thermophysical method of measuring the moisture content of bulk beneficiation products // Journal of Mining Institute. 1978. Vol. 77. p. 40-44.
Article
  • Date submitted
    1977-10-24
  • Date accepted
    1977-12-20
  • Date published
    1978-04-01

Simulation of an automatic control system for a closed cycle of grinding on an analog computer

Article preview

Despite the large number of works devoted to models of single-stage closed-cycle grinding, there is no model reflecting the relationship between the main grinding parameters and the fineness of the classifier overflow. The conducted studies make it possible to check the stability and quality of control of all parameters of the unit except the fineness of the overflow. However, since the fineness of the classifier overflow is one of the most important grinding parameters, checking the possibility of its control is especially important. This problem can be solved only in an integrated way, since a closed grinding cycle is a multivariable object of automatic control.

How to cite: Zlatkin V.I., Ryzhii P.P., Gorelik A.K., Steinman E.E., Makovsky A.N. Simulation of an automatic control system for a closed cycle of grinding on an analog computer // Journal of Mining Institute. 1978. Vol. 77. p. 45-50.
Article
  • Date submitted
    1977-10-03
  • Date accepted
    1977-12-02
  • Date published
    1978-04-01

Use of a predictive signal for solving the problem of optimal control of a drying drum

Article preview

Previously, the authors proposed a mathematical model of the cake-drying process in a rotating drying drum with longitudinal supply of the drying agent. Based on this model, the problem of optimal control of the drying unit was formulated and solved by methods of classical calculus of variations. ...

How to cite: Deitch V.G., Stalsky V.V. Use of a predictive signal for solving the problem of optimal control of a drying drum // Journal of Mining Institute. 1978. Vol. 77. p. 51-56.
Article
  • Date submitted
    1977-10-02
  • Date accepted
    1977-12-09
  • Date published
    1978-04-01

Mathematical model of heat transfer in multitube systems of heat and water supply for coal mines

Article preview

In the regions of the Far North, the surface method of pipeline laying is becoming increasingly widespread, having a number of advantages compared with laying pipes in perennially frozen ground. To protect pipelines from freezing, cold water pipelines are laid in common insulation with one or more pipelines transporting hot water. Solving the problem of temperature distribution along the length of pipelines placed in common insulation, taking into account their heat exchange with each other and with the environment through the insulation, is of significant interest both for the mining enterprise as a whole and for heat supply organizations.

How to cite: Tretyakov N.M., Tretyakova N.M., Stepanov A.S. Mathematical model of heat transfer in multitube systems of heat and water supply for coal mines // Journal of Mining Institute. 1978. Vol. 77. p. 57-63.
Article
  • Date submitted
    1977-10-01
  • Date accepted
    1977-12-08
  • Date published
    1978-04-01

Primary converters of thermovacuum moisture meters

Article preview

The operation of thermovacuum moisture meters is based on the following phenomenon: if a thin layer of the tested material is placed in a vacuum chamber and air is evacuated from it, the temperature of the material will begin to decrease. Simultaneously, a convective heat flux arises from the walls of the chamber and the surface of the material. The intensification of heat and mass transfer in the primary converters of thermovacuum moisture meters makes it possible to significantly (by 3–4 times) reduce the measurement time, and in some cases also improve the measurement accuracy.

How to cite: Volchenko A.G., Proskuryakov R.M. Primary converters of thermovacuum moisture meters // Journal of Mining Institute. 1978. Vol. 77. p. 64-67.
Article
  • Date submitted
    1977-10-26
  • Date accepted
    1977-12-13
  • Date published
    1978-04-01

A digital weight summator for built-in weighing devices

Article preview

During the automation of the operational accounting of quarry truck operation with the help of built-in weighing devices, there is a need to accumulate information about the weight of the load transported during a work shift. This problem can be solved by means of digital summators. ...

How to cite: Alekseenko Y.A., Gardzish V.A., Semenov M.A. A digital weight summator for built-in weighing devices // Journal of Mining Institute. 1978. Vol. 77. p. 68-71.
Article
  • Date submitted
    1977-10-09
  • Date accepted
    1977-12-10
  • Date published
    1978-04-01

Correction of the nonlinearity of the temperature dependence of thermistor resistance in a bridge circuit

Article preview

Owing to a number of advantages over other types of temperature transducers, thermistors are widely used in various thermal control devices — moisture meters, flow meters, level gauges, etc. In these instruments, in order to eliminate the influence of the initial temperature of the material, a differential connection of two thermistors with identical temperature dependences is usually used in the region of possible variation of the initial temperature of the material. ...

How to cite: Seliverstov A.A. Correction of the nonlinearity of the temperature dependence of thermistor resistance in a bridge circuit // Journal of Mining Institute. 1978. Vol. 77. p. 72-75.
Article
  • Date submitted
    1977-10-24
  • Date accepted
    1977-12-09
  • Date published
    1978-04-01

Physical principles of the construction of primary transducers for monitoring droplets in an air or gas flow

Article preview

When operating technological systems associated with the use of an air or gas flow (for example, systems for the purification of industrial gases, pneumatic transport of bulk materials, artificial reduction of air humidity), there is a possibility of liquid droplets entering the air duct. This phenomenon significantly impairs the operating efficiency of the systems under consideration and leads to premature wear of the equipment used. To avoid an emergency situation, such systems are usually provided with a gas-liquid mixture separation unit. The element of such a device that records the moment of liquid carryover is a primary transducer.

How to cite: Krichevsky E.S., Sabadash N.S., Tyushina I.A. Physical principles of the construction of primary transducers for monitoring droplets in an air or gas flow // Journal of Mining Institute. 1978. Vol. 77. p. 76-80.
Article
  • Date submitted
    1977-10-03
  • Date accepted
    1977-12-17
  • Date published
    1978-04-01

A high-frequency system for rapid control of the moisture content of KSMC concentrates

Article preview

The automated process control system of the Nalchik hydrometallurgical plant requires up-to-date information on the moisture content of the initial intermediate products of KSMP. The currently used thermogravimetric method requires 4 hours to dry the intermediate products at a temperature of 105°C to a constant weight ...

How to cite: Avdeeva A.F., Shipulin A.V. A high-frequency system for rapid control of the moisture content of KSMC concentrates // Journal of Mining Institute. 1978. Vol. 77. p. 81-83.
Article
  • Date submitted
    1977-10-05
  • Date accepted
    1977-12-27
  • Date published
    1978-04-01

Automatic counting of the number of fully loaded dump cars

Article preview

At the Apatit production association, apatite ore is delivered from the mines to the concentrators by railroad dumpcars with a capacity of 100 tons. Loading of the dumpcars is carried out by a hatchman from the ore chutes or the bunkers of loading stations. This article considers a system for the automatic counting of only fully loaded dumpcars, which can be used in an automated load-control system.

How to cite: Kalm E.A., Timofeev P.S. Automatic counting of the number of fully loaded dump cars // Journal of Mining Institute. 1978. Vol. 77. p. 84-87.
Article
  • Date submitted
    1977-10-12
  • Date accepted
    1977-12-23
  • Date published
    1978-04-01

Features of measuring circuits with parametric modulation

Article preview

In monitoring the moisture content of materials with high dielectric losses, circuits that allow measuring the components of the complex impedance of a capacitive transducer are usually used. The greatest sensitivity among them is characteristic of bridge meters. ...

How to cite: Valeev V.G., Avdeeva A.F. Features of measuring circuits with parametric modulation // Journal of Mining Institute. 1978. Vol. 77. p. 88-92.
Article
  • Date submitted
    1977-10-18
  • Date accepted
    1977-12-03
  • Date published
    1978-04-01

Use of the principles of high-frequency moisture control to determine the end point of drying of complex bioproducts in vacuum drums

Article preview

Solving the problem of automatic control of the end point of drying of raw materials in horizontal vacuum kettles will make it possible to increase the output of high-quality products with lower energy consumption, comply with the current standards for shipped products, and achieve a significant economic effect. ...

How to cite: Gvozdev A.V., Sabadash N.S. Use of the principles of high-frequency moisture control to determine the end point of drying of complex bioproducts in vacuum drums // Journal of Mining Institute. 1978. Vol. 77. p. 93-95.
Article
  • Date submitted
    1977-10-22
  • Date accepted
    1977-12-06
  • Date published
    1978-04-01

Investigation of dynamic parameters of the primary transducer of the vacuum filter cake mass flow rate

Article preview

The paper investigates the dynamic properties of the primary transducer of the cake mass flow rate, mounted on the belt conveyor of a drum vacuum filter with an internal filtering surface. The basis of the transducer is a horizontal rectangular movable platform resting at its corner points on elastic membrane elements, which are combined into a common hydraulic system. In order to determine the instantaneous values of the support reactions in the dynamic operating mode of the transducer, due to the insignificance of the curvilinear displacement of the platform with the load, we will limit ourselves to an analysis of its equilibrium conditions in the steady-state regime. ...

How to cite: Tsai A.G. Investigation of dynamic parameters of the primary transducer of the vacuum filter cake mass flow rate // Journal of Mining Institute. 1978. Vol. 77. p. 96-103.
Article
  • Date submitted
    1977-10-27
  • Date accepted
    1977-12-19
  • Date published
    1978-04-01

Frequency mixers for high-frequency capacitance meters made on the scheme of built according to the F-meter circuit

Article preview

For controlling the composition of substances, their molecular state, and moisture content of various materials, the dependence of the dielectric permittivity value on these parameters is widely used in measurement technology. In this case the change of dielectric permittivity of the substance filling the measuring capacitor, which is the primary measuring transducer, leads to a change in its initial electrical capacitance. Continuous capacitance measurement makes it possible to plot a graph reflecting the nature of the variation of the controlled parameter over time. ...

How to cite: Kalm E.A. Frequency mixers for high-frequency capacitance meters made on the scheme of built according to the F-meter circuit // Journal of Mining Institute. 1978. Vol. 77. p. 104-109.
Article
  • Date submitted
    1977-10-06
  • Date accepted
    1977-12-19
  • Date published
    1978-04-01

Sensitivity of the capacitive primary transducer for density

Article preview

Let us consider the principle underlying the measurement of pulp density by the capacitive method in the case of a non-contact two-electrode measuring cell. In the analysis we will use the equation for the imaginary Bp component of the conductivity of the equivalent circuit of the cell. ...

How to cite: Zhilkina E.V. Sensitivity of the capacitive primary transducer for density // Journal of Mining Institute. 1978. Vol. 77. p. 110-112.
Article
  • Date submitted
    1977-10-11
  • Date accepted
    1977-12-07
  • Date published
    1978-04-01

Investigation of the design parameters of the conductometric slurry density transducer

Article preview

The objective of the study was to investigate the potential electric fields of a seven-electrode conductometric transducer in order to find its optimal design parameters. Since the seven-electrode transducer consists of two four-electrode cells connected in series, the simulation was performed for the case of a four-electrode primary transducer. ...

How to cite: Zhilkina E.V. Investigation of the design parameters of the conductometric slurry density transducer // Journal of Mining Institute. 1978. Vol. 77. p. 113-116.
Article
  • Date submitted
    1977-10-06
  • Date accepted
    1977-12-07
  • Date published
    1978-04-01

The influence of the schemes of the executive body drive of a mechanohydraulic harvester on its theoretical productivity

Article preview

Modern mechanohydraulic harvesters with a hydraulic turbine drive, prototypes of which are being industrially tested at hydraulic mines in Kuzbass, are self-propelled machines of selective action with actuators in the form of crown cutters. ...

How to cite: Makhovikov B.S. The influence of the schemes of the executive body drive of a mechanohydraulic harvester on its theoretical productivity // Journal of Mining Institute. 1978. Vol. 77. p. 117-122.
Article
  • Date submitted
    1977-10-25
  • Date accepted
    1977-12-13
  • Date published
    1978-04-01

Statistical characteristics of the Vorkuta-region atmospheric air temperature fluctuations as the main perturbation of the system of automatic control of thermal objects of mines

Article preview

The calculation and adjustment of regulators, as well as the choice of optimal modes of operation of thermotechnical facilities (mine air-heating units, boiler houses, heat and water supply systems of mines, settlements, and cities) are determined by the atmospheric air temperature. ...

How to cite: Tretyakov N.M., Tretyakova N.M., Stepanov A.S. Statistical characteristics of the Vorkuta-region atmospheric air temperature fluctuations as the main perturbation of the system of automatic control of thermal objects of mines // Journal of Mining Institute. 1978. Vol. 77. p. 123-127.
Article
  • Date submitted
    1977-10-18
  • Date accepted
    1977-12-13
  • Date published
    1978-04-01

Pneumohydraulic suspension of heavy-duty dump trucks as a source of measuring information for built-in weighing devices

Article preview

In the development of mineral deposits by open-pit method for transportation of rock mass, road transport is the most promising, and, in particular, heavy-duty dump trucks of the Belarusian Automobile Plant BelAZ-540, BelAZ-548A and BelAZ-549 with carrying capacity of 27, 40 and 75 tons, respectively. Improving the efficiency of the use of quarry dump trucks is hindered by the imperfection of the existing operational control of the mass of the transported cargo and the lack of normalization of loading dump trucks at excavators. The use of built-in automatic weighing devices for rock mass in BelAZ dump trucks will make it possible to eliminate these shortcomings and obtain a substantial economic effect.

How to cite: Gardzish V.A., Semenov M.A. Pneumohydraulic suspension of heavy-duty dump trucks as a source of measuring information for built-in weighing devices // Journal of Mining Institute. 1978. Vol. 77. p. 128-134.
Article
  • Date submitted
    1977-10-16
  • Date accepted
    1977-12-26
  • Date published
    1978-04-01

Improving the accuracy of moisture measurement by the thermovacuum method

Article preview

Experience of application of various methods of measuring the moisture content of complex mineral fertilizers under industrial conditions confirms the promise and workability of thermovacuum moisture measurement. The issues of the relationship between systematic and random errors of TVV-series thermovacuum moisture meters developed at the LGI are considered in sufficient detail.

How to cite: Bychkov A.I., Goldovsky B.I., Proskuryakov R.M. Improving the accuracy of moisture measurement by the thermovacuum method // Journal of Mining Institute. 1978. Vol. 77. p. 135-137.
Article
  • Date submitted
    1977-10-23
  • Date accepted
    1977-12-02
  • Date published
    1978-04-01

Pneumatic control system for a dust-suppressing curtain

Article preview

Intrinsically safe control systems for water dust-suppressing curtains are not produced by the domestic industry. Existing semi-automatic systems of the PB-1 type, developed by the VNIItsvetmet institute, and those similar to them operate on the photoelectric principle and are powered from the AC mains. ...

How to cite: Kersky E.K. Pneumatic control system for a dust-suppressing curtain // Journal of Mining Institute. 1978. Vol. 77. p. 138-140.
Article
  • Date submitted
    1977-10-05
  • Date accepted
    1977-12-22
  • Date published
    1978-04-01

Toward the development of an automatic control system for the thickening process

Article preview

A modern automated system is created as a system of optimal control in the sense that the solutions it generates should be aimed at achieving a certain specified control objective. The formulation and solution of the optimal control problem require a mathematical description of the object, determination of the constraints imposed by the real production process, and selection of the control criterion. ...

How to cite: Nazarov V.P. Toward the development of an automatic control system for the thickening process // Journal of Mining Institute. 1978. Vol. 77. p. 141-143.
Article
  • Date submitted
    1977-10-18
  • Date accepted
    1977-12-14
  • Date published
    1978-04-01

Radio control of a DET-250 bulldozer

Article preview

At the Mukulansky open pit of the Tyrnyauz Mining and Metallurgical Combine, bulldozers are often forced to work in dangerous zones above the worked-out space and on unstable sections of rock dumps during their leveling. The presence of people and machines on the so-called failure prism is very dangerous — a part of the dump surface that even under a slight additional load can lose cohesion with the main mass of the dump rock and, under the action of its own weight, collapse downward together with the bulldozer and people. ...

How to cite: Kersky E.K. Radio control of a DET-250 bulldozer // Journal of Mining Institute. 1978. Vol. 77. p. 144-145.