-
Date submitted2023-12-15
-
Date accepted2024-06-13
-
Date published2025-02-25
Development of equipment and improvement of technology for inertial thickening of backfill hydraulic mixtures at the final stages of transportation
The results of the study of the functioning of the developed thickening equipment as part of the stowing complex for the formation of a flow of high-concentration hydromixture are presented. To explain the operation of the hydrotransport system of the stowing complex, equipped with a thickener of the developed design, its basic diagram is presented. A mathematical model has been created that describes the mechanism of inertial sedimentation of a solid component of a hydraulic mixture in a working chamber equipped with hydrodynamic profiles. Interaction with the profile leads to flow stratification due to a change in the trajectory of movement and a decrease in speed. The interval of rational velocity of primary pulp entering the input of the working chamber of the inertial thickener is substantiated. The synthesis of solutions of the thickening process model is performed in the COMSOL Multiphysics and Ansys Fluent programs. This made it possible to eliminate physical contradictions in the operation of the equipment and justify the overall dimensions of its main elements, ensuring the implementation of the mechanism of inertial sedimentation of the slurry. It was found that the concentration of the thickened flow at the outlet branch pipe of the thickener working chamber is determined by the level of the primary hydraulic fluid velocity, the characteristic length of the section of interaction with the deflecting profile, and the ratio of the flow and attack angles. A nomogram of the dynamics of the change in the hydraulic fluid concentration in the section of the outlet branch pipe depending on the ratios of the overall dimensions of the deflecting profile of the working chamber was compiled. The results of the study allowed formulating recommendations for selecting the dimensions of the thickener's deflecting hydrodynamic profile to form a flow of hydraulic mixture with a concentration of about 50 % by weight. The developed equipment can be used in a stowage complex and will increase the range of supply of the stowage mixture. This is due to the fact that a flow of primary slurry with a low concentration, due to lower pressure losses, can be moved in a pipeline system over a greater distance than a flow with a high filler content. The use of a thickener at the final stage of transportation is intended to increase the concentration of the hydraulic mixture immediately before production.
-
Date submitted2021-12-15
-
Date accepted2022-09-12
-
Date published2023-08-28
Substantiation and selection of the design parameters of the hydroficated equipment complex for obtaining backfill mixtures from current enrichment tailings
The issue of the influence of the concentration of the solid phase on the reduction of energy costs and specific energy consumption during pulp transportation is considered. The procedure for preparing slurry from the current enrichment tailings is shown. A scheme is given and the operation of a hydroficated unit for thickening and hydraulic transport of backfill mixtures is described. A diagram of the movement of solid particles in one of the units of the complex – a lamellar thickener is shown. The summary table shows the main design parameters and characteristics of the lamellar thickener. A general view of the laboratory setup used for experimental studies with slurry at various concentrations is given. An example of calculating productivity, density and specific load is presented. The dependence of the shear stress on the velocity gradient was determined for various pulp concentrations. Experimental studies of the process of thickening the production of slurry from the current enrichment tailings have been carried out. It was found that the geometric dimensions of the thickener depend on the concentration of the solid phase in the transported mixture. It is concluded that the flow rate of the slurry and the head loss are functions of the rheological characteristics of the viscoplastic slurry and can be calculated from the derived calculated dependencies.
-
Date submitted2021-07-05
-
Date accepted2022-01-24
-
Date published2022-04-29
Ensuring the excavation workings stability when developing excavation sites of flat-lying coal seams by three workings
- Authors:
- Oleg I. Kazanin
- Andrei A. Ilinets
On the basis of analysis of mining plans and field studies at mines of JSC SUEK-Kuzbass, it is shown that in conditions of increasing the size of excavation columns during the development of flat-lying coal seams the stress-strain state of the rock mass along the workings length changes significantly. The necessity of predicting the stress-strain state at the design stage of the workings timbering standards, as well as subsequent monitoring of the workings roof state and its changes in the mining operations using video endoscopes, is noted. The results of numerical studies of the stress-strain state of the rock mass during the development of excavation sites by three workings for various combinations of width of the pillars between the workings for mining-geological and mining-technical conditions of the “Taldinskaya-Zapadnaya-2” mine are provided. The stresses in the vicinity of the three workings are compared with the values obtained during the development of the excavation sites by double drift. A set of recommendations on the choice of the location of the workings, the width of pillars, timbering standards that ensure the stable condition of the workings throughout the entire service life at the minimal losses of coal in the pillars is presented.
-
Date submitted2018-07-22
-
Date accepted2018-09-07
-
Date published2018-12-21
Game theory model of state in-vestment into territories of advanced development in the regions of mineral resources specialization
- Authors:
- A. V. Kozlov
- A. B. Teslya
- S. A. Chernogorskii
Historically developed and non-compliant with modern conditions, the structure of industry placement and related inequality in economic development of certain territories are additional negative factors that hinder economic development of the country. Hence, the search for new organizational forms and methods of territorial development, facilitation of industrial growth in regions with mineral resources specialization become more and more relevant. Another no less important issue is justification of economic feasibility of using such tools and assessment of critical consequences of their application. Suggested by the authors, game theory model of state investment into territories of advanced development describes the method of limited resources distribution and becomes an instrument to assess the feasibility of investment into creation of advanced development territories under the conditions of insufficient information and actions of specific interest groups. Application of the suggested game theory model of state investment into creation of advanced development territories allows to forecast behavior of program participants, to model consequences of management decisions both for government structures and separate program participants.
-
Date submitted2017-11-09
-
Date accepted2018-01-02
-
Date published2018-04-24
Analyis of government support tools for mining companies in the Russian Arctic zone
The paper focuses on the development of mining companies in the Russian Arctic zone in the context of searching for new ways to improve government control over the development of the Arctic zone. Existing outer restrictions imposed upon Russia and changes in the global financial market not only determined a paradigm shift to regional government control, but also dictated the need to search for new mechanisms of state influence on the regional economy. Primarily it concerns the development of growth zones based on utilizing resource potential, creation and implementation of tools aimed at attracting investments to the Arctic zone and offsetting the factors of northern appreciation for mining companies. With this in mind, government support of specific regional development projects is becoming an urgent issue. The authors analyze new approaches to the development of public management in the Russian Arctic zone, for mining companies in particular, aimed at creating special economic conditions that would stimulate the operation of plants extracting mineral resources. Research methodology is based upon the analysis of factors restricting economic development and growth of the Russian Arctic zone and mining companies in the first place, as well as analysis of possible tools to support mining plants operating in the Arctic territories (advanced development zones, industrial clusters, «supporting zones»). The authors define priority goals and prospects of implementing such operation mode for mining companies in the Arctic zone, and propose a list of possible measures of government support needed to stimulate development of mining companies and the entire Arctic economy of Russia.
-
Date submitted2017-11-22
-
Date accepted2018-01-04
-
Date published2018-04-24
Justification of a methodical approach of aerologic evaluation of methane hazard in development workings at mines of Vietnam
- Authors:
- V. V. Smirnyakov
- Nguen Min' Fen
The methods of evaluation of the aerological conditions to be performed for the purpose of normalization of mining conditions are provided in the present review; the location of possible accumulations of explosive gases during the drift of the development workings are taken into account. To increase the safety of the development working regarding the gas factor, a complex evaluation of a working was developed with respect to the dynamics of methane emission and air coursing along the working which is strongly affected by the character of the leakages from the ventilation ducting. Thereby, there occurs a necessity of the enhancement of a methodical approach of calculation of ventilation of a working which consists in taking into consideration a total aerodynamic resistance of the booster fan including the local resistances of the zones of the working. An integer simulation of the gas-air flows realized on the basis of a software package FLowVision allows to evaluate a change in the methane concentration in the zones of local accumulations.
-
Date submitted2013-07-07
-
Date accepted2013-09-17
-
Date published2014-03-17
Ways of improving waste disposal in the workings of salt mines
- Authors:
- O. V. Kovalev
- S. P. Mozer
Address the major aspects of waste disposal in underground space. Are key problems of isolation of wastes in underground salt deposits? Proposed waste disposal technology, based on the use of waste for immobilization of natural mineral salts.
-
Date submitted2013-07-17
-
Date accepted2013-09-07
-
Date published2014-03-17
Increasing efficiency and mine resource development on the Prokopevsk-Kisilevsky deposit
The security issues of the deep mining of Prokopevsk-Kisilevsky deposit the Kuzbass are considered. The analysis of the existing technologies and systems development are executed. The recommendations to improvement of the technical and economic parameters, reducing accidents and injuries of the working off inventories powerful coal steeply inclined seams and steep coal seams were given.
-
Date submitted2013-07-05
-
Date accepted2013-09-23
-
Date published2014-03-17
Increase of stability of mine workings in the permafrost zone
- Authors:
- A. F. Galkin
Some experimental results of increase of stability of mine workings are presented in this article. The investigated mine workings are located in the permafrost conditions and the increasing of stability is achieved by insulation. Problems of thermal protection of frozen breeds are considered at high temperatures of air in mine workings.
-
Date submitted2009-10-18
-
Date accepted2009-12-17
-
Date published2010-09-22
Reuse of development workings as an element of providing the effective coal output
- Authors:
- M. A. Ilyashov
The article contains the results of application in a coal mine of a combined way for protection and support of development workings. This method combines a frame support, anchors and a cast support strip erected behind the longwale. The geomechanical substantiation of technological parameters, regulations and the field for efficient use of this method are given. Its introduction has allowed to increase the loads on longwale and to lower labour content and expenses for maintenance of butt entries.
-
Date submitted2009-10-14
-
Date accepted2009-12-03
-
Date published2010-09-22
Some geomechanical aspects in the development of calculation methods of rock pressure in permanent mine workings
- Authors:
- A. M. Kozel
The paper deals with the particular features of the stress-strain state and mechanical condition of the rocks surrounding the permanent mine workings; they should be taken into account in the development and updating of standards and calculation methods to ensure the stability of these workings.
-
Date submitted2009-07-24
-
Date accepted2009-09-27
-
Date published2010-04-22
Influence of geomechanical processes in rock mass on the selection of parameters of technological schemes for flat seams mining at the Leninsk-Kuznetsk coal deposit
- Authors:
- E. P. Yutiaev
The article deals with the aspects concerning the influence of geomechanical processes in rock mass on the selection of parameters of technological schemes for flat coal seams mining. Based on the analysis of experience gained under similar conditions at coal mines of the advanced national and foreign countries, the promising trends in the research work and development projects for the SUEK-Kuzbass Co.were suggested.
-
Date submitted2009-07-29
-
Date accepted2009-09-15
-
Date published2010-04-22
Preconditions for application of supports of different types in productive workings of low-thick gently-pitching deposits in tectonically stressed massif (for conditions of the Karnasurt ore mine)
- Authors:
- A. V. Lovchikov
- A. V. Matytsyn
The paper presents the data on the mining-geological conditions for mining and types of stope supports applied at the Karnasurt Mine, the Lovozersky rare-metal deposit. The peculiar feature of mining conditions is the presence of high subhorizontal tectonic stresses in the rock masses, which make the stope roofs more stable, allowing application of non-reinforced types of support.
-
Date submitted2009-07-19
-
Date accepted2009-09-11
-
Date published2010-04-22
Calculation of supports of parallel workings divided with yieldable pillars at anthracite seams
The article presents the methods for calculation of supports of parallel workings divided with yieldable pillars at anthracite seams. Consideration is given to the development of experimental data card for protection and maintenance of paired conveyor entries with using the steelpolymer anchor supports.
-
Date submitted2009-07-25
-
Date accepted2009-09-09
-
Date published2010-04-22
The use of data on stress-strain state of rock mass in solutions of mining-and-technical tasks on the example of the Tishin ore mine
The Permion State Technical University and ASE «VNIItsvetmet» have carried out in situ measurements of stress-strain state at the Tishinsky lead-zinc ore deposit. Measurements and interpretation of deformations and stresses caused by excavation were used. Complex of researches made it possible to solve some important problems for safeguarding effective and secure ore production ore on deep level.
-
Date submitted1951-07-30
-
Date accepted1951-09-09
-
Date published1952-03-26
Forecast of water breakthroughs from the soil of mine workings
- Authors:
- A. I. Morozov
The development of brown coal deposits in the Moscow Basin is associated with serious difficulties caused by the instability of the host rocks and their high water content. Water content is the cause of peculiar phenomena called breakthroughs. A breakthrough is the release of water or quicksand into mine workings. According to their location and origin, breakthroughs can be divided into two types: 1) breakthroughs from the soil and 2) breakthroughs from the roof. The nature and mechanics of the phenomenon of breakthroughs from the soil and roof are different. A breakthrough from the roof can occur in all cases when, during a roof collapse in a development working or a stope, the above-coal aquifer falls into the collapse zone, regardless of whether it is confined or unconfined. The presence of confined water increases the intensity of the breakthrough and makes it more dangerous in its consequences. For a breakthrough from the floor of a mine working to occur, the presence of a subcoal aquifer is necessary, but still not a sufficient condition. A breakthrough can occur only when the subcoal waters have a pressure that exceeds the level of the workings' soil and are separated from the latter by a low-power impermeable layer. The mechanism of a breakthrough from the soil is reduced to the destruction of the subcoal clay layer that blocks the access of the subcoal aquifer waters to the preparatory or treatment workings. The main active force that destroys the thickness of subcoal clays is the hydrostatic pressure of the subcoal waters.
-
Date submitted1950-07-22
-
Date accepted1950-09-14
-
Date published1951-04-30
On the theory of icing of mine workings during their ventilation
- Authors:
- A. S. Ter-Pogosyan
During summer ventilation of some workings with low temperatures (acquired, for example, during the winter cooling period), warm atmospheric air, getting into the working, enters into heat exchange with its walls and, cooling, becomes saturated. Therefore, condensed moisture falls on the walls of the working. Its fallout begins from the place where the air flow temperature becomes equal to the saturation temperature. From the same place of the working, where the flow temperature reaches 0°, icing of moisture occurs, which complicates the operation of the working. It is necessary to calculate: 1) icing and condensation thresholds, 2) the thickness of the icing layer, the distribution of temperature along the working as a function of time, air flow velocity, transverse dimensions of the working, temperature and humidity of the atmospheric air.
-
Date submitted1948-07-11
-
Date accepted1948-09-13
-
Date published1949-11-04
On the influence of the cost of transport on the floor crosscuts on the most advantageous dimensions of the mine field
- Authors:
- O. B. Bokii
This article is devoted to the assessment of the impact of the cost of hauling minerals along floor crosscuts on the most advantageous longwall dimensions of the mine field of a vertical shaft opening a suite of steeply dipping seams, determined by the method of L. D. Shevyakov. The cost of hauling minerals along crosscuts during the development of a suite of steeply dipping seams by a vertical shaft with floor crosscuts increases with the increase in the number of floors in the mine field and decreases the most advantageous number of floors against the values given by L. D. Shevyakov's formulas derived without taking this factor into account. In exceptional cases (location of the mine outside the suite with a small angle of dip of the seams), the number of floors determined without taking into account the cost of transport along floor crosscuts may exceed their most advantageous number by 50% or more.