-
Date submitted2021-01-25
-
Date accepted2021-02-22
-
Date published2021-04-26
Conducting industrial explosions near gas pipelines
The problem to ensure the safety of objects which are in the area of blasting operations, ensuring the destruction of hard rocks, remains relevant. The article presents the results of a large-scale experiment to determine the safe conditions for conducting drilling and blasting operations near the active gas pipeline. The simplest and most reliable way to ensure the safety of the protected object from seismic impact is to reduce the intensity of the seismic wave, which is achieved by changing the parameters of drilling and blasting operations. This requires research to determine the impact of blasting operations on the parameters of seismic waves and the development of methods for measuring these parameters. The paper presents a detailed analysis of the seismic blast wave impact on the displacement of the ground and the model gas pipeline. The features of seismic monitoring during blasting operations near the active gas pipeline are shown. The seismic coefficients and attenuation coefficient of seismic waves are determined. It is proved that the readings of the seismic receivers on the surface and in the depth of the massive differ by two or more times.
-
Date submitted2020-05-24
-
Date accepted2020-07-23
-
Date published2020-11-24
Estimation of ore contour movements after the blast using the BMM system
Measurement of ore movements by blast is one of the key components of the quality control system at any mining enterprise, which allows to obtain the accuracy necessary for determining the location of ore contours. About 15 years ago, a monitoring system was developed in Australia that allows mine personnel to make three-dimensional measurements of ore blocks movement at each blast. Studies have shown that ore blocks movement is extremely variable, and it characterized by a complete absence of a deterministic component. The consequence is that modeling ore contour movements during the blast will be inaccurate, and the best results for the mining enterprise can only be achieved by directly measuring the movement. The technology of measuring ore contours movements considered in the article is based on three-dimensional movement vectors obtained in different parts of the blasted block, characterized by different movements. It is obvious that the accuracy of determining the ore contours position after the blast is proportional to the number of measurements made on the block. Currently, the movement control technology based on the BMM system is actively used by global mining companies, its use reduces losses and dilution of ore. In 2017, the pilot implementation of the BMM system was started at the Olympiadinsky GOK, and the system is being implemented in several Russian mining companies.
-
Date submitted2018-05-14
-
Date accepted2018-07-01
-
Date published2018-10-24
Method for forecast of surface deformation during excavation operations in restraint urban conditions using the slurry trench technique
- Authors:
- P. A. Demenkov
- L. A. Goldobina
- O. V. Trushko
The article suggests the method for forecast of surface deformation during excavation operations in restraint urban conditions using the slurry trench technique based on FEM simulation. The results of numerical simulation of the construction of a semi-underground structure with slurry trench technique are given. The regularities of the change in the stress-strain state are determined depending on the trench parameters and the physical-mechanical properties of the soils. The work presents the troughs of surface subsidence during the construction of an excavation using the slurry trench technique, the diagrams of bending moments, transverse and longitudinal forces arising in the trench. Numerical experiments in Plaxis 2D and 3D were performed to estimate the discrepancy between modeling results in a plane and volumetric formulation of the problem.
-
Date submitted2015-12-29
-
Date accepted2016-02-21
-
Date published2016-12-23
Poorly studied phenomena in geoelectrics
- Authors:
- V. S. Mogilatov
Undoubtedly, modern geoelectric technologies emerge in the result of the development of traditional approaches and techniques. However of more interest is the appearance of completely new technologies based on new effects and new models of interaction of geological medium and electromagnetic field. The author does not commit to indicate principally new directions, but only wants to discuss some poorly known facts from the theory and practice of geoelectrics. The outcome of this study could be considered attracting the attention of experts to non-traditional signals in geoelectrics. The reviewed phenomena of interest, not fully implemented in practice in the author’s opinion, are field split into two polarizations: transverse electric (the ТЕ-field) and transverse magnetic (the ТМ-field), then some poorly known properties of ТМ-field, the role of bias currents, the anisotropy of horizontal resistances, the role of geomagnetic field in geoelectric sounding, the unique resolution of CSEM (Controlled Source Electro-Magnetic) techniques at sea.
-
Date submitted2009-10-04
-
Date accepted2009-12-19
-
Date published2010-09-22
Modeling of the volumetric stress-strain condition of the rock massive in the near mine which are crossing zone of weakening
- Authors:
- A. G. Protosenya
- D. N. Petrov
- M. G. Popov
According to geological data which was received at the Yakovlevsky deposit, the volumetric model was developed. This model taking into consideration the driving of the mine through zone of weakening. During the analysis of the stress-strain condition near the mine the character of distribution and numerical results of tangential and longitudinal stresses have been revealed. The zone of weakening affects to the distribution of stresses and displacements around the mine. To select the parameters of the lining support it is necessary to take into consideration weakenings and contacts in the ore massive and the distance for these zones.
-
Date submitted2009-10-13
-
Date accepted2009-12-14
-
Date published2010-09-22
The evaluation of geodynamic consequences оf long-term exploration of lower cretaceous sediments at the Yamburg oil-gas condensate field with join of additional wells
Within the framework of the engineering design of the join up of additional wells of Lower Cretaceous sediments at the Yamburg oil-gas condensate field the evaluation of geodynamic consequences of long-term exploitation of the mentioned field was performed, as well as the hazardous geodynamic process permanent survey program was developed.
-
Date submitted2009-10-20
-
Date accepted2009-12-11
-
Date published2010-09-22
Monitoring of deformation processes of the earth surface with methods of differential interferometric treatment of radar data
- Authors:
- A. A. Krivenko
- Yu. A. Kashnikov
The Differential Interferometry SAR (DInSAR) has recently become one of the most popular methods to reveal and analyze the subsidence of the ground. This method is considered by researchers to be well suited to solve a problem of small relative ground shifts survey applying the short (centimeter) radio waves.
-
Date submitted2009-07-21
-
Date accepted2009-09-28
-
Date published2010-04-22
The determination of the volume stress-strain conditions of the rock massive with the circular outline mining ensrined with the anchors
- Authors:
- A. G. Protosenya
- N. A. Belyakov
In the article the analysis of consolidating effect from application of the anchor fastening, which using at driving of transport tunnels in the conditions of North Caucasus is produced. The change of the stress-strain condition of the rock massive, which is weaked by the mining of the circular outline is certain with the finite-elements method. On the basis of the executed design the row of graphic dependences, which describes changing of the sizes of limitary areas depending on strength and deformational properties of the rocks. Due to results of the conducted work the direction of further researches is seted.
-
Date submitted2009-07-09
-
Date accepted2009-09-03
-
Date published2010-04-22
The stress-strain state of the massive of the loose ores in the Yakovlevsky deposit around the minings which were drilled with the combines or with drilling-blast technology
The article presents the consistent patterns of the changes in stress-strain state of the massive by the minings of the first stage of protective overlapping in the Yakovlevsky deposit. The change of the stress-strain condition of the rock massive, which is weaked by the mining was determined by the method of finite elements. The stresses distribution in the massive, the displacement of the contour of the minings, the size of conditional zones of non-linear deformations has been obtained. For stoping passes at the first stage the cutting with combine and application of fastening with the anchors has been suggested.