-
Date submitted2022-07-10
-
Date accepted2023-06-20
-
Date published2024-02-29
Mathematical modeling of the electric field of an in-line diagnostic probe of a cathode-polarized pipeline
A mathematical model of the in-line control of the insulation resistance state for cathodically polarized main pipelines according to electrometry data is considered. The relevance of the work is caused by the opportunity to create in-line internal isolation defects indicators of the main pipelines for transported liquids that are good conductors and expand the functionality of monitoring and controlling cathodic protection systems of the main pipelines. Features of the mathematical model are: consideration of the electric conductivity of transported liquid influence on electric field distribution; consideration of the influence of external and internal insulating coating resistance; use of the electric field of an in-line diagnostic probe for quality control of internal insulation. Practical significance consists in the development of modeling methods for control subsystems of main pipeline protection against corrosion and the development of special mathematical and algorithmic support systems for monitoring and controlling the operating modes of the cathodic protection station of main pipelines.
-
Date submitted2022-05-12
-
Date accepted2022-11-17
-
Date published2023-04-25
Microbiological remediation of oil-contaminated soils
- Authors:
- Irina D. Sozina
- Aleksandr S. Danilov
Microbiological remediation is a promising technology for the elimination of environmental contamination by oil and petroleum products, based on the use of the metabolic potential of microorganisms. The issue of environmental contamination by crude oil and its refined products is relevant in the Russian Federation since the oil industry is one of the leading sectors of the country. Mechanical and physico-chemical methods of treatment are widely used to clean oil-contaminated soils. However, the methods belonging to these groups have a number of significant drawbacks, which actualizes the development of new methods (mainly biological), since they are more environmentally friendly, cost-effective, less labor-intensive, and do not require the use of technical capacities. Various bio-based products based on strains and consortia of microorganisms have been developed that have proven effectiveness. They include certain genera of bacteria, microscopic fungi, and microalgae, substances or materials acting as sorbents of biological agents and designed to retain them in the soil and increase the efficiency of bioremediation, as well as some nutrients. Statistical data, the most effective methods, and technologies, as well as cases of using microorganisms to restore oil-contaminated soils in various climatic conditions are presented.
-
Date submitted2022-03-25
-
Date accepted2022-09-06
-
Date published2022-12-29
Autoclave modeling of corrosion processes occurring in a gas pipeline during transportation of an unprepared multiphase medium containing CO2
The problem of selecting a method for ensuring the reliability of the unprepared fluid transport facilities of an unprepared fluid in the presence of carbon dioxide is considered. Carbon dioxide corrosion is one of the dangerous types of damage to field and main pipelines. It has been shown that dynamic autoclave tests should be carried out during staged laboratory tests in order to determine the intensity of carbon dioxide corrosion and to select the optimal method of protection. A hypothesis about the imperfection of the existing generally accepted approaches to dynamic corrosion testing has been put forward and confirmed. A test procedure based on the use of an autoclave with an overhead stirrer, developed using elements of mathematical modeling, is proposed. The flows created in the autoclave provide corrosive wear of the sample surface similar to the internal surfaces elements wear of the pipelines piping of gas condensate wells. The autoclave makes it possible to simulate the effect of the organic phase on the flow rate and the nature of corrosion damage to the metal surface, as well as the effect of the stirrer rotation speed and, accordingly, the shear stress of the cross section on the corrosion rate in the presence/absence of a corrosion inhibitor. The given results of staged tests make it possible to judge the high efficiency of the developed test procedure.
-
Date submitted2021-09-16
-
Date accepted2022-02-24
-
Date published2022-04-29
Production of microfluidic chips from polydimethylsiloxane with a milled channeled surface for modeling oil recovery during porous rock waterflooding
Microfluidic chips with porous structures are used to study the flow of oil-containing emulsion in the rock. Such chips can be made from polydimethylsiloxane by casting into a master mold. At the initial stages of research, fast and cheap prototyping of a large number of different master molds is often required. It is proposed to use milling to make a channeled surface on a polymethyl methacrylate plate, from which a negative image should be taken, which is the master mold for casting positive polydimethylsiloxane chips in it. Several epoxy compositions have been tested to make this master mold. The main requirement in the search for the material was the exact replication of the geometry and sufficiently low adhesion to polymethyl methacrylate and polydimethylsiloxane for removing the product with minimal damage to the mold. It was possible to make master molds from all the materials used, but with defects and various degrees of damage. One of the epoxy compositions was found suitable for making a master mold with many elements simulating the grains of a porous medium (height to width ratio 2:3). The developed method makes it possible to use polydimethylsiloxane for prototyping chips simulating the porous structure of an oil rock.
-
Date submitted2021-02-20
-
Date accepted2021-10-18
-
Date published2021-12-16
Thermal protection implementation of the contact overheadline based on bay controllers of electric transport traction substations in the mining industry
The article presents the principle of thermal protection of the contact overheadlineand substantiates the possibility of practical implementation of this principle for rail electric transport in the mining industry. The algorithm for the implementation of modern digital protection of the contact overhead line as one of the functions of the controller is described. A mathematical model of thermal protection is proposed, which follows from the solution of the heat balance equation. The model takes into account the coefficient of the electrical networktopology, as well as the coefficient of consumption of the current-carrying core of the cable, which determines the reduction in the conducting section from contact erosion and the growth of oxide films. Corrections for air flows are introduced when receiving data from an external anemometer, via telemechanics protocol. The mathematical model was tested by writing a real thermal protection program in the C programming language for the bay controller, based on the circuitry of which is the STM32F407IGT6 microcontroller for the microcontroller unit. Verification tests were carried out on a serial bay controller in 2020. The graphs for comparing the calculated and actual values of temperatures, with different flow rates of the current-carrying conductor of the DC cable, are given. To obtain data, telemechanics protocols IEC 60870-104 and Modbus TCP, PLC Segnetics SMH4 were used.
-
Date submitted2021-04-15
-
Date accepted2021-07-27
-
Date published2021-10-21
Analysis of the application and impact of carbon dioxide media on the corrosion state of oil and gas facilities
Products of several currently operated production facilities (Bovanenkovskoye, Urengoyskoye oil and gas condensate fields, etc.) contain an increased amount of corrosive CO 2 . Effect of CO 2 on the corrosion of steel infrastructure facilities is determined by the conditions of its use. Carbon dioxide has a potentially wide range of applications at oil and gas facilities for solving technological problems (during production, transportation, storage, etc.). Each of the aggregate states of CO 2 (gas, liquid and supercritical) is used and affects the corrosion state of oil and gas facilities. Article analyzes the results of simulation tests and evaluates the corrosion effect of CO 2 on typical steels (carbon, low-alloy and alloyed) used at field facilities. The main factors influencing the intensity of carbonic acid corrosion processes in the main conditions of hydrocarbon production with CO 2 , storage and its use for various technological purposes are revealed. Development of carbon dioxide corrosion is accompanied and characterized by the localization of corrosion and the formation of defects (pitting, pits, etc.). Even alloyed steels are not always resistant in the presence of moisture and increased partial pressures of CO 2 , especially in the presence of additional factors of corrosive influence (temperature, aggressive impurities in gas, etc.).
-
Date submitted2020-10-05
-
Date accepted2021-03-30
-
Date published2021-06-24
Improving the efficiency of relay protection at a mining and processing plant
The paper presents the results of constructing effective relay protection in the power supply system of a mining and processing plant (MPP). A brief description of the MPP is given, the power supply and substitution circuits used to calculate the short-circuit currents are given. A statistical analysis of failures in the electric network of the MPP has been carried out, which makes it possible to draw conclusions about the nature of failures ranges. Analysis of the registered faults shows that a significant part of them are line-to-earth faults, which in most cases turn into multiphase short circuits, which are interrupted by overcurrent protection. In order to improve the efficiency and reliability of the relay protection, the power supply scheme of the MPP was refined and analyzed. The calculation of the short-circuit currents was made, which made it possible to calculate the settings of the relay protection and give recommendations on the place of its installation and adjustment in order to ensure the normal operation of electricity consumers. To reduce the number of failures to the cable insert on the line leaving the administrative and household complex (AHC), and to increase the reliability of power supply to consumers, it is advisable to divide the capacities of the existing 10 kV line into two parallel ones by laying a second line. It is recommended to install a current cut-off on the line outgoing to the AHC, the feasibility of the installation of which was shown by calculations. This will reduce the chance of failures to the cable gland. Data on the setting currents of overcurrent protection and current cut-off are given on the selectivity card.
-
Date submitted2020-01-10
-
Date accepted2020-01-14
-
Date published2020-02-25
Biogeochemical assessment of soils and plants in industrial, residential and recreational areas of Saint Petersburg
Soils and plants of Saint Petersburg are under the constant technogenic stress caused by human activity in industrial, residential, and recreational landscapes of the city. To assess the transformed landscapes of various functional zones, we studied utility, housing, and park districts with a total area of over 7,000 hectares in the southern part of the city during the summer seasons of 2016-2018. Throughout the fieldwork period, 796 individual pairs of soil and plant samples were collected.A complex of consequent laboratory studies performed in an accredited laboratory allowed the characterization of key biogeochemical patterns of urban regolith specimens and herbage samples of various grasses. Chemical analyses provided information on the concentrations of polluting metals in soils and plants of different land use zones.Data interpretation and calculation of element accumulation factors revealed areas with the most unfavorable environmental conditions. We believe that a high pollution level in southern city districts has led to a significant degree of physical, chemical, and biological degradation of the soil and vegetation cover. As of today, approximately 10 % of the Technosols in the study area have completely lost the ability to biological self-revitalization, which results in ecosystem malfunction and the urgent need for land remediation.
-
Date submitted2015-08-17
-
Date accepted2015-10-25
-
Date published2016-04-22
Ecological aspects of vehicle tunnels ventilation in the conditions of megalopolises
- Authors:
- S. G. Gendler
The characteristic of Russia and foreign vehicle tunnels are provided in paper and advantages of their placement in the conditions of the city are noted. It is shown that one of the main factors defining negative impact on environment in the period of tunnels driving is mine equipment, and at operation – vehicles. The analysis of essential differences of features of pollution of atmospheric air at construction of tunnels from its pollution at construction of buildings on a surface is given. The examples illustrating levels of negative impact of the upcast ventilation shaft airflow on atmospheric air are given and the ventilation schemes reducing this influence are offered. It is shown that during operation of road tunnels of pollution of the air environment can extend on considerable distances from tunnel portals. Numerical calculations of concentration of carbon oxides and nitrogen during removal of the upcast ventilation shaft airflow through portals and through the mines built near them are executed. Technical solutions on purifications of tunnel air by means of electrostatic filters are described.
-
Date submitted2015-08-09
-
Date accepted2015-10-05
-
Date published2016-04-22
Inorganic and organic vitreous foam materials and prospect of environmental cleaning from oil and oil products pollutions
- Authors:
- V. E. Kogan
The analysis of own experimental materials which are part of the new scientific direction – complex research of physical and chemical regularities of novel inorganic and organic vitreous sorbents and investigation of the oil and oil products absorption processes by that sorbents developed on department of the General and Physical Chemistry of National Mineral Resources University (Mining University) under the leadership of the author of this paper is provided. In particular, specifics of kinetic curves of oil absorption for sorbents with a vitreous surface are experimentally established and theoretically proved by the conducted researches.
-
Date submitted2015-07-30
-
Date accepted2015-09-11
-
Date published2016-02-24
Principles of corporate communications management system development for mineral resources companies
- Authors:
- A. B. Makhovikov
The article shows the benefits of using unified communications for the management of mineral resources companies and discusses some principles of a modern corporate communications system providing the guaranteed encryption of all transmitted information (voice, text and files). The system structure, its operations and technologies, necessary for the creation of such a system, are substantiated. The secure corporate communication system developed at the National Mineral Resources University (Mining University) is described, and its comparison with other domestic and foreign systems is provided.
-
Date submitted2015-07-14
-
Date accepted2015-09-09
-
Date published2016-02-24
Engineering and geomechanical forecast for waste disposal in underground caverns including earthquake-prone zones
- Authors:
- O. V. Kovalev
The article aims at obtaining representative scientifically based data to determine parameters of a necessary-safe condition of the rock massif (RM) in underground waste diposal caverns zones, including earthquake-prone zones. The main requirements for underground caverns for hazardous waste disposal and for their construction technology are described. The subject of the research is underground solution caverns in halogen rocks. Data for justification of safe waste disposal conditions in underground salt caverns and its stages are presented. A complex approach to the solution of the research problem is described. The main aspects of dynamic influence of seismic waves on underground caverns stability are considered. Taking into account seismic-risk zoning data on the research region some significant parameters of a possible seismic impact on the experimental cavern are calculated. The article points out the necessity of superincumbent rock and surface displacement assessment for the experimental site zone using the suggested complex approach and including the analysis of surveying data and results of rock mass geomechanical modeling.
-
Date submitted2014-11-28
-
Date accepted2015-01-13
-
Date published2015-10-26
Nanobar code as multi-purpose two-dimensional notation with new features
- Authors:
- E. I. Pryakhin
The article gives an analysis of the current standard two-dimensional codes, showing their features and applications. It was concluded that the feasibility of developing a new type of two-dimensional codes, the Nanobar code (NBC), in which information can be open (available) and, if necessary, closed (unavailable) to the user through the use of cryptographic encryption techniques. At the same time the new codes provide a significant increase in the volume of coded information that allows us to recommend using them as a local database, in particular for the issue of electronic technological certificates and product passports, personal dog tags for the military, athletes and others. It is noted as an important characteristic that the Nanobar code is able to encode different types of digital information. Due to its characteristics, the NBC is proposed to use as an identification number and protect legal products against counterfeiting. Two variants of the NBC technology application are proposed – with laser printing and printer. For reading information from the NBC, special software was developed, including mobile applications that allow using a smartphone to read the NBC. The basic scope of the NBC application was suggested.
-
Date submitted2013-07-05
-
Date accepted2013-09-23
-
Date published2014-03-17
Increase of stability of mine workings in the permafrost zone
- Authors:
- A. F. Galkin
Some experimental results of increase of stability of mine workings are presented in this article. The investigated mine workings are located in the permafrost conditions and the increasing of stability is achieved by insulation. Problems of thermal protection of frozen breeds are considered at high temperatures of air in mine workings.
-
Date submitted2013-07-13
-
Date accepted2013-09-21
-
Date published2014-03-17
Modern technology of consumption waste management in the mining agglomeration
- Authors:
- M. Sh. Barkan
- A. B. Makhovikov
- E. I. Kabanov
Any industrial agglomeration is a territory, not only with a high concentration of industrial facilities, but also with high population density. This, in turn, is an essential prerequisite to problems associated with the large volume of waste consumption. To solve these problems it is necessary not only to improve the technology for processing different kinds of waste, but also to establish a system by their rapid collection and transport.
-
Date submitted2008-11-23
-
Date accepted2009-01-30
-
Date published2009-12-11
The estimate of the utilization’s efficiency of the production waste products, which appeared as a result of the preservation of the environment measures
- Authors:
- E. M. Pronin
Nowadays the problems of the stable growth of mineral and source of raw materials and fuel and energy complex industries are attached great importance to, since it influences the country social-economic condition. In its turn the development of the mining industry requires opening up new lands, which are especially vulnerable to different kinds of anthropogenous and technogenous factors. The changes in the state of economic system have excluded the lowering expenditure by the economy of the production scale. The typical features of a new economy became the progress of free competition and intensive demonopolization. At the same time for the mining industry it is significant that large-scale enterprises should be the foundation of many cities economies of the Russian Federation. For the way out of a system crisis it is necessary to change the strategy – to alter not only the condition of the system, but its management. The formation of the mining complexes permits to use sources of raw materials of the exploited deposits in the proper way, to process waste products of the basic production into the commodity output, to raise the efficiency and cut costs of the preservation of the environment measures from concentration waste products, exhaust solutions, gases, warm water harmful influence on the environment. The practical use of the production waste products of the mining complexes is unprofitable and makes sense only because of its opportunity partially compensating the aggregate investments for the preservation of the environment. The estimate of the utilization s efficiency of the production waste products has made.