-
Date submitted2023-05-31
-
Date accepted2023-12-27
-
Date published2024-04-25
Velocity structure of the Earth’s crust and upper mantle in the Pechenga ore region and adjacent areas in the northwestern part of the Lapland-Kola orogen by the receiver function technique
- Authors:
- Andrei G. Goev
The article presents a study of the Earth’s crust and upper mantle in the Pechenga ore region, as well as areas adjacent to it in the northwestern part of the Kola region. Applying the receiver function technique to data acquired by three broadband seismic stations, we obtained one-dimensional seismic velocity distribution models to a depth of 300 km. The stations are located in the northern parts of Finland and Norway, as well as in the Pechenga region of the Russian Federation. Despite the stations being in relatively close proximity (within 100 km of each other), the velocity models turned out to be significantly different, which indicates structural discontinuity within the lithosphere. Thus, Finland station data set revealed a gradient crust-mantle transition, which is not present in the other two models. At depths of about 150 km, a low-velocity zone was discovered, associated with mid-lithospheric discontinuity, which was not found beneath the Pechenga ore region. Furthermore, the crustal structure of the Pechenga region has an anomalously high Vp/Vs ratio to a depth of about 20 km. Considering the fact that the Pechenga (Nikel) seismic station was installed in close proximity to major copper-nickel deposits, this anomaly can be interpreted as a relic of Proterozoic plume activity.
-
Date submitted2018-09-04
-
Date accepted2018-11-16
-
Date published2019-02-22
Development of an occupational safety management system based on the process approach
- Authors:
- V. A. Filimonov
- L. N. Gorina
The article discusses the relevance and possibility of using the process approach in the development and implementation of occupational safety management systems based on GOST 12.0.230-2007, which is the main document in this area for all industrial enterprises and organisations of the Russian Federation. The system of occupational safety management in the organisation is considered taking into account all its internal communications and input-output parameters. It is shown that the process approach used in the design of the occupational safety management system in the organisation, allows categorising the list of works (processes), participants, resources (responsible, performers, documents, etc.), the control and correction processes. The methodological substantiation of the process approach to the design of the occupational safety management system in the organisation is given, the basic issues of its applicability are considered. A context diagram of the process of an occupational safety management system is drawn in the IDEF0 graphical notation by means of the SADT structural analysis technology. The decomposition of the context diagram to the required levels of detail is presented and the balance factor of the models is calculated.
-
Date submitted2017-11-06
-
Date accepted2018-01-12
-
Date published2018-04-24
Improvement of the procedure of recruitment of personnel for hazardous work environment
- Authors:
- N. D. Tskhadaya
- D. Yu. Zakharov
With the purpose of the reduction of the number of the emergency and abnormal situations in the oil mines conditioned by the influence of the «human factor» an opportunity of application of the system of permit to the works with respect to the real functional state of the personnel is considered in the paper. A «human factor» may become a reason not only for the occurrence but also for the development of the emergency situation according to the unfavorable scenario.The arduous labor conditions such as heating environment, low level of lighting, high level of the dust load may result in the multiple increase of the negative influence of the factors of the real functional state on the quality and safety of the operations. Reasoning from this fact, the consideration of the factors of the functional state in the process of getting a permit to works in the oil mines is of vital importance and requires a well-reasoned and integrated assessment.
-
Date submitted2015-12-28
-
Date accepted2016-02-28
-
Date published2016-12-23
Ion distribution function in their own gas plasma
- Authors:
- A. S. Mustafaev
- V. S. Sukhomlinov
Flat one-sided probe was used for the first time to measure the first seven coefficients in the Legendre polynomial expansion of ion energy and angle distribution functions for He + in He and Ar + in Ar under the conditions when the ion velocity gained along its free run distance is comparable to the average thermal energy of atoms. Analytic solution of the Boltzmann kinetic equation is found for ions in their own gas for arbitrary tension of electric field in plasma when the dominating process is resonant charge exchange. The dependence of cross-section of resonant charge exchange on the relative velocity is accounted for. It is demonstrated that the ion velocity distribution function differs significantly from the Maxwell distribution and is defined by two parameters instead of just one. The results of computational and experimental data agree quite well, provided the spread function of measurement technique is taken into account.
-
Date submitted2015-10-24
-
Date accepted2015-12-17
-
Date published2016-08-22
Spatial distribution of energy release during propagation of fast electron beam in the air
- Authors:
- V. S. Sukhomlinov
- A. S. Mustafaev
The paper focuses on development of the analytical theory to assess spatial distribution of energy released during propagation of the fast electron beam in a gas, in particular in the air at electron energies of 1-100 keV. An approach adopted by authors [2, 3] to study inelastic deceleration of electrons in the air is further developed here. As the inelastic interaction in most cases leads to energy relaxation while elastic interaction causes distribution isotropization over directions, the first task solved in the paper is finding the electron distribution function including only elastic collisions. In the final part of this paper an analytical solution to this task is presented with account of both types of electron deceleration in the air. The calculations show that when elastic collisions are taken into account this leads to increased spatial density of energy release and to narrowing of the primary energy release region of the fast electrons, as compared to calculations accounting for only inelastic deceleration.
-
Date submitted2015-07-14
-
Date accepted2015-09-28
-
Date published2016-02-24
Ion velocity distribution function in arbitrary electric field plasma
- Authors:
- A. S. Mustafaev
- V. S. Sukhomlinov
Experimental investigations of the ion velocity distribution function (IVDF) are of great importance to various kinds of application: plasma nanotechnology, surface treatment, nanoelectronics, etching processes et al. In this paper, we propose a new probe method for diagnostics of anisotropic IVDF. The possibilities of the method have been demonstrated in arbitrary electric field plasma under conditions when an ion acquires a velocity on its mean free path comparable with the average thermal velocity of atoms. The energy and angular dependency of seven IVDF Legendre components for He + in He and Ar + in Ar have been measured and polar diagrams of the ion motion have been plotted. In order to verify the reliability and accuracy of the method the analytic solution of the kinetic Boltzmann equation for ions in plasma of their own gas has been found. Conditions under which resonant charge exchange is the dominant process and the ambipolar field is arbitrary have been considered. For the ambipolar field the dependence of resonant charge cross-section on the relative velocity has been taken into account. It is shown that the form of the IVDF is significantly different from the Maxwellian distribution and defined by two parameters. The results of theoretical and experimental data taking into account the instrumental function of the probe method are in good agreement. Calculations of the drift velocity of Hg + ions in Hg, He + in He, Ar + in Ar, and mobility of N 2 + in N 2 are well matched with known experimental data in wide range of electric field values.
-
Date submitted2014-10-15
-
Date accepted2014-12-30
-
Date published2015-08-25
Method of controlling the temperature field on the basis of the Green's function
- Authors:
- Yu. V. Ilyushin
- I. M. Pershin
At the present stage of development of automatic control systems raises the question of maintaining the set temperature objects. The authors developed MetO-wild synthesis of nonlinear regulators to stabilize the temperature field, a uniform object of management on the basis of a given error. We obtained a function of the initial heating and the mathematical modeling of the process, analyzed the results. By creating a regulator there has been designed software and hardware programming language Pascal, which allows to simulate the behavior of temperature fields in an isotropic web. It is a simulation of the temperature of the system in different configurations: with different amounts of pulsed heating sources with relay control principle. Practical results of the research suggest the possibility of constructing silicon carbide heating element made in the form of an isotropic core.
-
Date submitted2010-07-13
-
Date accepted2010-09-13
-
Date published2011-03-21
Actual ways of increasing the effectiveness of facilities for hydrotransport mountain companies
- Authors:
- A. A. Velnikovskiy
Shown the necessity of improving hydrotransport installations. Built a functional model of the hydrotransport system. As a result of its analysis identified the most relevant ways to improve efficiency of hydrotransport on mining enterprises.
-
Date submitted2009-09-06
-
Date accepted2009-11-10
-
Date published2010-06-25
Diagnostic method for measurements of emission parameters of thermoemission cathodes
- Authors:
- A. S. Mustafaev
This article deals with the diagnostic method of emission parameters of thermo emission cathodes by the transverse magnetic field. The knudsen Cs-Ba-diode with the surface ionization are investigated.
-
Date submitted2009-09-17
-
Date accepted2009-11-20
-
Date published2010-06-25
Functional and stylistic, national and temporal features of modern scientific english text building
- Authors:
- S. A. Sveshnikova
The paper presents the analysis of the influence of functional and stylistic, national and cultural and time-of-creation factors on the organization of modern scientific texts in English.
-
Date submitted2009-08-13
-
Date accepted2009-10-29
-
Date published2010-02-01
Analysis of statistical data of lecture of the alloyed steels
- Authors:
- R. V. Kurtenkov
Influence of a chemical compound on the carbon contents in a steel is analysed, in the course of processing of month basic data the mathematical model is received, it is offered optimum significances of source parametres at the carbon contents in a steel.
-
Date submitted2009-07-18
-
Date accepted2009-09-30
-
Date published2010-04-22
Account of stress gradients in rock mass in designing of mining constructions
- Authors:
- S. V. Suknyov
- M. D. Novopashin
Using the gradient approach the criteria of shear and tensile cracking are developed in compression under conditions of stress concentrations near mine workings. Considering the size effect, a function type of local strength is determined, expressions for critical pressure are derived and comparison between analytical and experimental data is performed.
-
Date submitted2009-07-29
-
Date accepted2009-09-29
-
Date published2010-04-22
State examination of mineral reserves in the system of wise utilization of the earth’s interior
- Authors:
- Yu. A. Podturkin
The major problem of bodies of the government in sphere of regulation of attitudes protection of reserves creation of conditions for rational use of resources. The basic role in its decision is played with examination protection of reserves. Maintenance of effective carrying out of examination demands its constant perfection with reference to market conditions with use of the international criteria regarding both calculation and an estimation of stocks, and drawing up design and the engineering specifications on development of mineral deposits.