-
Date submitted2024-04-09
-
Date accepted2024-06-03
-
Date published2024-07-04
Analysis of the geochemical barriers effectiveness as the basis for the use of nature-like water purification technologies
Nature-like technologies are being introduced into many human activities including mining wastewater treatment. This work is based on long-term studies of the Sibay copper-zinc-pyrite deposit development. It is dedicated to assessment of geochemical barriers effectiveness in Cu, Zn, Cd removal from water of the Karagayly River (receiving quarry and dump drainage water). The research is based on the elements’ content and forms in water and bottom sediments, pH values etc. Four types of hydrogeochemical environment (formed due to changes in the water use over the past 20 years) were distinguished using discriminant analysis. The mechanisms of barriers formation and destruction were described. Statistical modeling of the metals’ precipitation was performed by multivariate regression analysis. Cu is adsorbed by recently formed Fe hydroxides, and, to a lesser extent, precipitates with sulfates as water pH increases. Antagonism to Mn hydroxides has been demonstrated, due to different physicochemical conditions for their precipitation. Zn enters solid phase mainly with sulfates, this element also forms its own mineral phases. The second mechanism is adsorption by recently formed Mn hydroxides, which corresponds to the idea of similar conditions for the precipitation of metal hydroxides. Cd behavior reflects conditions intermediate between these of Cu and Zn. Contribution of both mechanisms (related to Fe hydroxides and aqueous sulfates) is equal. Antagonism to Mn is absent. According to the assessment results using of nature-like technologies in situ in watercourses, canals and other water drainage systems is promising. Developed statistical models can be used for needs of experimental studies and artificial geochemical barriers engineering.
-
Date submitted2022-09-30
-
Date accepted2023-02-13
-
Date published2023-04-25
Hydrogeoecological conditions of technogenic groundwater in waste disposal sites
The specific hydrogeoecological conditions of aquifers of some technogenic formations, mainly iron ore skarn-magnetite and titanium-magnetite formations, are considered. The resulting wastes, which are stored in waste disposal sites during development of deposits, due to the impact of a number of factors (natural and technogenic) form technogenic waters. Waste disposal facilities are complex engineering structures (dumps and sludge storages), which in turn create their own hydrogeoecological conditions, which must be investigated in order to prevent and minimize environmental and economic damage caused by these objects to the aquatic environment. The paper presents long-term field and laboratory studies of the aquatic environment under the influence of a waste disposal facility in the Middle Urals – one of the largest tailings, representing a potential environmental and man-made hazard. This tailing dump contains tens of tons of waste – enrichment tailings and creates specific hydrogeoecological conditions on the territory. Based on many years of monitoring studies, an analysis of these conditions was carried out – the quality of groundwater affected by the tailings was assessed. It is shown that groundwater is of technogenic nature, i.e. are man-made waters that have a significant impact on the surface and underground hydrospheres of the territory.
-
Date submitted2020-10-26
-
Date accepted2021-07-28
-
Date published2021-10-21
Investigation of the influence of the geodynamic position of coal-bearing dumps on their endogenous fire hazard
The paper investigates the hypothesis according to which one of the factors influencing the spontaneous combustion of coal-bearing dumps is its geodynamic position, i.e. its location in the geodynamically dangerous zone (GDZ) at the boundary of the Earth crust blocks. This hypothesis is put forward on the basis of scientific ideas about the block structure of the Earth crust and the available statistical data on the location of burning dumps and is studied using computer modeling. A dump located in the area of Eastern Donbass was chosen as the object of research. The simulation results show that the penetration of air into the dump body from the mine through the GDZ, which crosses the mining zone, is possible at an excess pressure of 1000 Pa created by the main ventilation fans. The fire source appearance in the dump body causes an increase in the temperature of the dump mass and becomes a kind of trigger that "turns on" the aerodynamic connection between the dump and the environment, carried out through the GDZ. It is concluded that the establishment of an aerodynamic connection between the mine workings and the dump through the GDZ can be an important factor contributing to the endogenous fire hazard of coal-bearing dumps. The simulation results can be used in the development of projects for monitoring coal-bearing dumps and measures to combat their spontaneous combustion.
-
Date submitted2019-07-21
-
Date accepted2019-09-20
-
Date published2020-02-25
Assessment of operational reliability of quarry excavator-dump truck complexes
- Authors:
- V. M. Kurganov
- M. V. Gryaznov
- S. V. Kolobanov
The method proposed in the article is based on the mathematical apparatus for quantitative assessment of the reliability of majority schemes of structural redundancy of transport processes, which provide the availability and usage of several backup delivery channels in the transport process in case of any malfunction. The principle of multi-channel haulage is commonly used in quarries for transportation of overburden and minerals from benches by dump trucks, when excavators and dump trucks performing cyclic operations function as a single excavator-dump truck complex. This pattern of work significantly increases the likelihood of fulfilling the daily plan for transporting rock mass due to the redistribution of dump trucks between mining and overburden excavators in the event of failure of one or more units of mining and handling equipment. The reliability of excavator-dump truck complexes is assessed in three stages: initial data collection for mathematical modeling of excavator-dump truck complex performance; solving the problem of optimizing the distribution of dump trucks between excavators, ensuring maximum productivity of the excavator-dump truck complex; assessment of the reliability of its work depending on the probability of fulfilling the daily plan for the transportation of rock mass. The proposed method is implemented as part of a computer program and makes it possible to automate the operational management of the process of transporting rock mass in a quarry using a mobile application. The developed guidelines can be used for any quarries with automobile transport, regardless of the type of mineral extracted, the mining method, the loading pattern, the capacity of the excavation and loading equipment fleet, and the capacity of operated dump trucks.
-
Date submitted2019-05-24
-
Date accepted2019-07-15
-
Date published2019-10-23
Effective Power and Speed of Mining Dump Trucks in Fuel Economy Mode
- Authors:
- V. I. Alexandrov
- M. A. Vasileva
- V. Y. Koptev
Existing methods for determining the effective power, based on the calculation of the average indicator operation of the engine during the piston stroke, do not take into account the change in thermodynamic parameters and the polytropic operation of the engine, the value of which depends on the polytropic efficiency of the duty cycle. This is the reason that the calculation of the effective power leads to some error – the margin of the engine features. The identification of this stock allows us to review the entire line of dump trucks in the direction of increasing their pass- port effective capacity, which will lead to a reduction in capital purchase costs due to the choice of a previously un- derestimated and cheaper option, as well as a reduction in current operating costs due to a decrease in the specific fuel consumption rate. Taking into account the stochastic nature of the transport process and assessing the influence of all external and internal factors when calculating the rational mode of operation of a mining truck can further reduce specific fuel consumption by choosing the rational speed of its movement in loaded and empty directions.
-
Date submitted2019-05-07
-
Date accepted2019-07-13
-
Date published2019-10-23
Improving the Energy Efficiency of the Electromechanical Transmission of an Open-pit Dump Truck
- Authors:
- A. E. Kozyaruk
- A. M. Kamyshyan
The article analyzes the existing systems of electromechanical transmission of mining trucks BelAZ. The influence of the load nature created by the uncontrolled rectifier on the power factor and mass-dimensional indicators of the electromechanical transmission isassessed. Variants of modernization of the AC-electromechanical transmission system are proposed, which provide power factor correction. The influence of the proposed options on the overall dimensions of the electromechanical transmission is considered. Based on the assessment, a modernization option was chosen that provides the required power factor with minimal impact on the overall dimensions of the electromechanical transmission. The results of modeling the operation of the existing electromechanical transmission and the modernized electromechanical transmission system using the most promising modernization option are presented.
-
Date submitted2014-10-20
-
Date accepted2014-12-24
-
Date published2015-08-25
Improving the technology of open-cast mining using surface miners and spreaders
- Authors:
- A. Yu. Cheban
The article is devoted to the issues of improving the efficiency of open-cast mining of solid minerals. Surface miners are effective and promising mining equipment that brought a large number of innovative technological solutions to the mining industry. The flow sheet of mining an overburden bench of high altitude with boom surface miners and the improved spreader is presented. Application of technical and technological improvements will significantly increase the productivity of mining equipment, reduce the cost of doing stripping operations and improve the profitability of the mining industry in the development of deposits of solid minerals, semi-indurated rocks.
-
Date submitted2014-07-20
-
Date accepted2014-09-18
-
Date published2014-12-22
Use оf renewable energy sources in the coal industry
- Authors:
- A. V. Limanskii
- M. A. Vasileva
There are three fundamental basic documents in energy conservation and energy efficiency today: the Energy Strategy in the period up to 2030; the Federal Law «On energy-saving and energy efficiency and in amending particular legislative acts of the Russian Federation»; and the State Energy Conservation and Energy Efficiency Program in the period up to 2020. In recent years, the upward trend in the use of renewable energy sources (RES) is becoming all the more evident. Until recently, the development of energy has seen a clear pattern: the areas of energy which have developed most are those which have a quite fast direct economic effect. The social and environmental impacts associated with these areas were considered only as incidental, and their role in decision-making was negligible. With this approach, we considered RES only as a future energy source, when traditional energy sources have been exhausted, or when obtaining them becomes extremely expensive and timeconsuming. The primary driver behind the intensive development of RES has been public pressure based on environmental concerns, rather than economic calculations about the future. The economic potential of the world’s renewable energy is currently estimated at 20 billion tons of oil equivalent per year, which is twice the annual output of all fossil fuels. This fact shows us the path of energy development in the near future. In this paper, on the basis of the laws of the Russian Federation, renewable energy in the coal industry is considered. We describe the experience and prospects of the use of mine water and burning rock dumps.
-
Date submitted2013-07-26
-
Date accepted2013-09-22
-
Date published2014-03-17
Parameters of removing the overburden for deposits complex structure of carbonate rocks
- Authors:
- V. V. Ivanov
The main features of the development of Open-complex structure of carbonate rocks. The dependence for the determination of dozing on the domestic heap career, moving overburden on bestransportnoy scheme in goaf. Found that the optimum length of excavator block executed by one parking dragline at quarries carbonate rocks is achieved with the minimum total cost of doing the work of overburden and waste associated with the removal of the overburden.
-
Date submitted2010-07-21
-
Date accepted2010-09-23
-
Date published2011-03-21
Engineering-geological substantiation of reshaping wave-built solid masses with partial removal of hydraulic mine dump
- Authors:
- I. V. Kuznetsova
- V. P. Zharikov
Consider the case of partial removal of hydraulic mine dump in the Kuzbass region in connection with the need to retrieve from under him mothballed coal reserves. The results of geotechnical studies alluvial array: the physical and mechanical properties of alluvial rock and measurement of pore pressure in them. The problems of research and some methodological techniques. We settle the question of creating a new sustainable construction is part of the hydraulic mine dump.
-
Date submitted1951-08-26
-
Date accepted1951-10-03
-
Date published1952-04-24
Physical and mechanical properties of clays of the coal-bearing suite of the Lower Carboniferous of the Moscow Basin
- Authors:
- V. D. Lomtadze
In the Moscow Basin, clay deposits occupy a significant part of the section of the sandy-clayey coal-bearing suite of the Lower Carboniferous. This suite is almost continuously distributed throughout the basin (Fig. 1). Throughout its length, it is characterized by the inconsistency of the section in the vertical and horizontal directions. Along the southern wing of the basin, the coal beds are thicker, while to the north, along the western wing, the coal content of the suite gradually decreases, and already in the section of the Tikhvin region only black carbonaceous clays and occasionally thin coal interlayers are observed. At the same time, the saturation of the section with refractory clays is significantly reduced here, the place of which is occupied by bauxite deposits and red sandy clays. The variability of the section of the coal-bearing suite is explained by the coastal-marine and coastal-continental conditions of its accumulation. The change in the structure of the coal-bearing suite along the strike is the result of the facies replacement of coal by carbonaceous clays, and then carbonaceous clays by red sandy clays. A. E. Ulmer believes that the southern part of the western wing and the southern wing of the Moscow Basin are included in the facies zone of accumulation of continental and coastal-marine sediments, and the northern part of the western wing is included in the facies zone characterized by the predominance of continental erosion over accumulation.