-
Date submitted2024-09-09
-
Date accepted2024-11-05
-
Date published2024-11-12
Acoustic emission criteria for analyzing the process of rock destruction and evaluating the formation of fractured reservoirs at great depths
In order to study the mechanism of destruction of rocks of various genesis and the formation of fractured reservoirs at great depths, laboratory studies of rock samples in the loading conditions of comprehensive pressure with registration of acoustic emission (AE) and parameters of the process of changing the strength and deformation properties of samples were carried out. The spatial distributions of the hypocenters of AE events for each sample were investigated. By the nature of the distributions, the fracture geometry is described, then visually compared with the position of the formed macrofractures in the samples as a result of the tests. The time trends of the amplitude distribution b, set by the Guttenberg – Richter law, were calculated, which were compared with the loading curves and trends of the calculated AE activity. Based on the analysis of the AE process for three types of rocks – igneous (urtites), metamorphic (apatite-nepheline ores), and sedimentary (limestones) – parameterization of acoustic emission was carried out to determine the features of the deformation process and related dilatancy. As a result, three types of destruction of samples were identified, their geometry and changes in strength and seismic criteria were established.
-
Date submitted2022-10-26
-
Date accepted2023-02-13
-
Date published2023-07-19
Determination of the grid impedance in power consumption modes with harmonics
The paper investigates the harmonic impedance determination of the power supply system of a mining enterprise. This parameter is important when calculating modes with voltage distortions, since the determined parameters of harmonic currents and voltages significantly depend on its value, which allow the most accurate modeling of processes in the presence of distortions in voltage and current. The power supply system of subsurface mining is considered, which is characterized by a significant branching of the electrical network and the presence of powerful nonlinear loads leading to a decrease in the power quality at a production site. The modernization of the mining process, the integration of automated electrical drive systems, renewable energy sources, energy-saving technologies lead to an increase in the energy efficiency of production, but also to a decrease in the power quality, in particular, to an increase in the level of voltage harmonics. The problem of determining the grid harmonic impedance is solved in order to improve the quality of design and operation of power supply systems for mining enterprises, taking into account the peculiarities of their workload in the extraction of solid minerals by underground method. The paper considers the possibility of determining the grid impedance based on the measurement of non-characteristic harmonics generated by a special nonlinear load. A thyristor power controller based on phase regulation of the output voltage is considered as such a load. Simulation computer modeling and experimental studies on a laboratory test bench are used to confirm the proposed method. The recommendations for selecting load parameters and measuring device connection nodes have been developed.
-
Date submitted2021-03-16
-
Date accepted2021-07-27
-
Date published2021-10-21
Allocation of a deep-lying brine aquifer in the rocks of a chemogenic section based on the data of geophysical well logging and 2D seismic exploration
Advancement in the production of potassium fertilizers is an important strategic task of Russian agricultural industry. Given annually growing production rates, the reserves of discovered potassium-magnesium salt deposits are noticeably decreasing, which creates the need to ensure stable replenishment of the resource base through both the discovery of new deposits and the exploitation of deep-lying production horizons of the deposits that are already under development. In most cases, deposits of potassium-magnesium salts are developed by underground mining. The main problem for any salt deposit is water. Dry salt workings do not require any additional reinforcement and can easily withstand rock pressure, but with an inflow of water they begin to collapse intensively – hence, special attention is paid to mine waterproofing. Determination of spatial location, physical and mechanical properties of the aquifer and water-blocking stratum in the geological section represent an important stage in the exploration of a salt deposit. The results of these studies allow to validate an optimal system of deposit development that will minimize environmental and economic risks. On the territory of Russia, there is a deposit of potassium-magnesium salts with a unique geological structure – its production horizon lies at a considerable depth and is capped by a regional aquifer, which imposes significant limitations on the development process. To estimate parameters of the studied object, we analyzed the data from CDP seismic reflection survey and a suite of methods of radioactive and acoustic well logging, supplemented with high-frequency induction logging isoparametric sounding (VIKIZ) data. As a result of performed analysis, we identified location of the water-bearing stratum, estimated average thickness of the aquifers and possible water-blocking strata. Based on research results, we proposed methods for increasing operational reliability of the main shaft in the designed mine that will minimize the risks of water breakthrough into the mine shaft.
-
Date submitted2020-05-17
-
Date accepted2020-10-05
-
Date published2020-11-24
Geological structure of the northern part of the Kara Shelf near the Severnaya Zemlya archipelago according to recent studies
Until recently, the North of the Kara Shelf was completely unexplored by seismic methods. Seismic and seismo-acoustic data that have appeared in recent years have made it possible to decipher features of the regional geological structure. This study solves the urgent problem of determining the prospects for the oil and gas potential of the North Kara sedimentary basin. The relevance of the research is associated with determining the prospects of the oil and gas potential of the North Kara sedimentary basin. The aim of the study is to clarify the age of the reflecting horizons using data on the geology of the island, as well as to determine the tectonic position of the sedimentary cover and basement structures in the north of the Kara shelf. The sedimentary cover is divided into three structural levels: Cambrian-Devonian, Middle Carboniferous-Cretaceous, Miocene-Quarter. The Cambrian-Devonian complex fills the deep troughs of the North Kara shelf. The most noticeable discontinuity is the base of Carboniferous-Permian rocks, lying on the eroded surface of folded Silurian-Devonian seismic complexes. The blanket-like plate part of the cover is composed of thin Carbon-Quarter complexes. The authors came to the conclusion that the fold structures of the Taimyr-Severozemelskiy fold belt gradually degenerate towards the Kara sedimentary basin and towards the continental slope of the Eurasian basin of the Arctic Ocean. A chain of narrow uplifts within the seabed relief, which correspond to narrow anticlines is traced to the West of the Severnaya Zemlya islands. Paleozoic rocks have subhorizontal bedding further to the West, within the Kara shelf. Mesozoic folding in the North of the Kara Sea is expressed exclusively in a weak activation of movements along faults. At the neotectonic stage, the shelf near Severnaya Zemlya was raised and the Mesozoic complexes were eroded. The modern seismic activity of the North Zemlya shelf is associated with the ongoing formation of the continental margin.
-
Date submitted2019-03-17
-
Date accepted2019-05-13
-
Date published2019-08-23
Manifestations of Acoustic Emission in Frozen Soils with Simultaneous Influence of Variable Mechanical and Thermal Effects on Them
- Authors:
- E. A. Novikov
- V. I. Shkuratnik
- M. G. Zaytsev
The subject of the research is to establish the fundamental laws of acoustic emission in frozen soils, which allow to create ways to control (monitor) their stability under the influence of variable temperature fields and quasistatic mechanical stress from engineering objects located on these grounds for various purposes. The applied importance of such methods is to increase the speed and reduce the complexity of engineering geological surveys in the northern regions of Russia, carried out with the aim of predicting the loss of stability of the bases of buildings and structures to ensure their safe operation. The study was performed on the original instrumental complex. Its description and characteristics are given. With the use of this complex, thermoacoustic emission effects arising from the repeated alternation of freezing and thawing cycles of the soil during the development of its deformed state, starting from the normal compaction phase and up to the final stage of destruction (the bulging phase), have been studied. It is shown that on the basis of such informative parameters as thermally stimulated activity and duration of acoustic emission pulses, an indicator can be obtained that quantitatively characterizes the stages of the stress-strain state of soils. An experimental dependence of the field of values of this indicator as a function of the mechanical stress and the fractional composition of the test soil is given. The qualitative convergence of this dependence with the classical soil deformation diagram obtained by N.M.Hersevanov is shown, where the stages of compaction, loss of stability (shifts) and destruction are highlighted. Possible physical mechanisms and features of the formation of an acoustic emission response at each of these stages are considered and substantiated. It is noted that the approaches to receiving, processing and interpreting acoustic emission measurement information, which are grounded within the framework of the study, allow to control and monitoring of the carrying capacity and stress-strain state of soils directly in the field.
-
Date submitted2019-01-17
-
Date accepted2019-03-05
-
Date published2019-06-25
Geological and geomechanical model of the Verkhnekamsk potash deposit site
- Authors:
- Yu. A. Kashnikov
- A. O. Ermashov
- A. A. Efimov
Major accidents at OJSC Uralkali raised the question of the need for a detailed study of the geological structure of the Verkhnekamskoye potassium salt deposit, the identification of anomalous complex zones in the oversalt rocks and, above all, in the water-blocking layer (WBL). The article proposes a method for isolating weakened zones in the WBL and potash reservoirs, based on the combined use of geomechanical (laboratory core tests) and geophysical (acoustic broadband logging in wells and surface seismic exploration) studies. It also describes the method of zoning of WBLand potash reservoirs on the physical and mechanical properties to obtain their specific values. This technique will help solve the most urgent problem of ensuring industrial safety in the development of the Verkhnekamskoye potassium salt deposit (the safety of the WBL). The implementation of the proposed method is considered for the Romanovsky site of the Verkhnekamskoye deposits of potassium and magnesium salts. The research included 2D seismic explorations, physical and mechanical properties testing, and finding statistical dependencies between static and dynamic geomechanical parameters. Based on the processing of seismic materials and the obtained dependencies, a geological and geomechanical model of this area was created, and zones with different physicomechanical properties were identified.
-
Date submitted2018-07-18
-
Date accepted2018-08-25
-
Date published2018-12-21
Development of vibroacoustic module for fine filtration of drilling muds
- Authors:
- G. B. Fedorov
- O. L. Dudchenko
- D. S. Kurenkov
The issue of drilling mud multiple use is problematic. To reuse, the solution must be efficiently cleaned from solid particles according to the class of 0.04-0.07 mm. An analysis of existing technologies and equipment has shown that drilling mud regeneration schemes are rather difficult to operate and expensive. In world practice there has been a tendency to create universal equipment, which allows most complete cleaning cycle for a drilling mud in fine grades. The paper proposes an innovative vibroacoustic module for cleaning drilling muds from sludge. The creative element of the proposal is the impact of vibroacoustic oscillations on the drilling mud passing through the mesh element. At the same time, specific effects arise around the mesh, which increase the productivity and efficiency of the process. The design of the vibroacoustic apparatus and the principle of its operation are presented. An important element of the proposal is that the oscillation is created by pistons interconnected by rods and located on opposite sides of the mesh. This dipole system provides the excitation of variable pressures of different polarity before the mesh and after it. The results of industrial tests of the vibroacoustic module when servicing the BU-75-BrE drilling rig are presented. The dependence of the installation performance and efficiency on the amplitude of oscillations was found. The optimal dynamic range of exposure (from 5.5 to 6.5 mm) was determined. Analysis showed that in the composition of the cleaned drilling mud, the maximum particle size of the solid phase did not exceed 0.04 mm. The conducted industrial tests confirmed the possibility of using the vibroacoustic module for cleaning the washing fluid and developing a pit-free drilling technology on its basis.
-
Date submitted2015-07-14
-
Date accepted2015-09-09
-
Date published2016-02-24
Engineering and geomechanical forecast for waste disposal in underground caverns including earthquake-prone zones
- Authors:
- O. V. Kovalev
The article aims at obtaining representative scientifically based data to determine parameters of a necessary-safe condition of the rock massif (RM) in underground waste diposal caverns zones, including earthquake-prone zones. The main requirements for underground caverns for hazardous waste disposal and for their construction technology are described. The subject of the research is underground solution caverns in halogen rocks. Data for justification of safe waste disposal conditions in underground salt caverns and its stages are presented. A complex approach to the solution of the research problem is described. The main aspects of dynamic influence of seismic waves on underground caverns stability are considered. Taking into account seismic-risk zoning data on the research region some significant parameters of a possible seismic impact on the experimental cavern are calculated. The article points out the necessity of superincumbent rock and surface displacement assessment for the experimental site zone using the suggested complex approach and including the analysis of surveying data and results of rock mass geomechanical modeling.
-
Date submitted2014-12-07
-
Date accepted2015-02-23
-
Date published2015-12-25
Bump hazard evaluation of a rock mass area as a result of its seismic acoustic activity registration
- Authors:
- V. V. Nosov
Ore production in deep rock-bump hazardous mines is closely connected with the need to in-crease workers’ safety, which demands heavy costs of taking preventive shockproof actions and applying expensive protection systems against mountain blows. The article considers a resource forecasting technique and a bump hazard evaluation method for a rock mass area, based on a mi-cromechanical model, which registers acoustic emission of heterogeneous materials, and empirical data, obtained as a result of acoustic signals registration with the help of the model, aimed at seis-mic-acoustic activity evaluation at «Taimir» and «Oktyabrsky» rock mass areas, belonging to Norylsk industrial region.
-
Date submitted2010-07-23
-
Date accepted2010-09-18
-
Date published2011-03-21
Amplitude-phase correction of additional MT impedance curves for two dimensional structures
- Authors:
- E. Yu. Ermolin
The regularities of the amplitudes and phases connections of MT-impedance tensor components for 2D geoelectrical synthetic models have been considered. The amplitude-phase correction (APC) allows to improve the quality of data processing results both for the main and for the additional impedances. It also gives a possibility to suppress biased data for noise pollution data. Recommendations on accuracy rising of determination of tensor impedance components in the MT-data processing have been defined on the base of found regularities.
-
Date submitted2010-07-30
-
Date accepted2010-09-10
-
Date published2011-03-21
Definition areas of possible migration gas fromthe reservoir by cross-hole seismic tomography method
- Authors:
- N. A. Poznyakova
Possibilities of cross-hole a seismoacoustic tomography method for studying tightness a tire-cover of a reservoir underground storehouse of gas (USG), created in water-bearing horizont. Research cross-hole spaces for definition zones possible migration and accumulation gas outside of a trap are considered. The system of supervision used at carrying out cross-hole seismoacoustic tomography is proved, the example of revealing zones migration and accumulation gas outside from reservoir is resulted. Prospects application the given method on USG in a monitoring mode are defined.
-
Date submitted2009-10-12
-
Date accepted2009-12-26
-
Date published2010-09-22
Methods and techniques for control of rockburst-hazard in underground mining at ore mines of the Far-East district
An assessment is given to the present-day state of control of dynamic rock pressure manifestations in the rockburst-hazardous ore mines of the Far-East district. Consideration is given to the used methods and facilities for control of rock pressure and the ways for their improvement . Basic foundations of methodical approaches to the assessment of geomechanical state of rock mass by data of geoacoustic control are considered.