-
Date submitted2022-07-10
-
Date accepted2023-06-20
-
Date published2024-02-29
Mathematical modeling of the electric field of an in-line diagnostic probe of a cathode-polarized pipeline
A mathematical model of the in-line control of the insulation resistance state for cathodically polarized main pipelines according to electrometry data is considered. The relevance of the work is caused by the opportunity to create in-line internal isolation defects indicators of the main pipelines for transported liquids that are good conductors and expand the functionality of monitoring and controlling cathodic protection systems of the main pipelines. Features of the mathematical model are: consideration of the electric conductivity of transported liquid influence on electric field distribution; consideration of the influence of external and internal insulating coating resistance; use of the electric field of an in-line diagnostic probe for quality control of internal insulation. Practical significance consists in the development of modeling methods for control subsystems of main pipeline protection against corrosion and the development of special mathematical and algorithmic support systems for monitoring and controlling the operating modes of the cathodic protection station of main pipelines.
-
Date submitted2022-03-25
-
Date accepted2022-09-06
-
Date published2022-12-29
Autoclave modeling of corrosion processes occurring in a gas pipeline during transportation of an unprepared multiphase medium containing CO2
The problem of selecting a method for ensuring the reliability of the unprepared fluid transport facilities of an unprepared fluid in the presence of carbon dioxide is considered. Carbon dioxide corrosion is one of the dangerous types of damage to field and main pipelines. It has been shown that dynamic autoclave tests should be carried out during staged laboratory tests in order to determine the intensity of carbon dioxide corrosion and to select the optimal method of protection. A hypothesis about the imperfection of the existing generally accepted approaches to dynamic corrosion testing has been put forward and confirmed. A test procedure based on the use of an autoclave with an overhead stirrer, developed using elements of mathematical modeling, is proposed. The flows created in the autoclave provide corrosive wear of the sample surface similar to the internal surfaces elements wear of the pipelines piping of gas condensate wells. The autoclave makes it possible to simulate the effect of the organic phase on the flow rate and the nature of corrosion damage to the metal surface, as well as the effect of the stirrer rotation speed and, accordingly, the shear stress of the cross section on the corrosion rate in the presence/absence of a corrosion inhibitor. The given results of staged tests make it possible to judge the high efficiency of the developed test procedure.
-
Date submitted2021-02-20
-
Date accepted2021-10-18
-
Date published2021-12-16
Thermal protection implementation of the contact overheadline based on bay controllers of electric transport traction substations in the mining industry
The article presents the principle of thermal protection of the contact overheadlineand substantiates the possibility of practical implementation of this principle for rail electric transport in the mining industry. The algorithm for the implementation of modern digital protection of the contact overhead line as one of the functions of the controller is described. A mathematical model of thermal protection is proposed, which follows from the solution of the heat balance equation. The model takes into account the coefficient of the electrical networktopology, as well as the coefficient of consumption of the current-carrying core of the cable, which determines the reduction in the conducting section from contact erosion and the growth of oxide films. Corrections for air flows are introduced when receiving data from an external anemometer, via telemechanics protocol. The mathematical model was tested by writing a real thermal protection program in the C programming language for the bay controller, based on the circuitry of which is the STM32F407IGT6 microcontroller for the microcontroller unit. Verification tests were carried out on a serial bay controller in 2020. The graphs for comparing the calculated and actual values of temperatures, with different flow rates of the current-carrying conductor of the DC cable, are given. To obtain data, telemechanics protocols IEC 60870-104 and Modbus TCP, PLC Segnetics SMH4 were used.
-
Date submitted2020-10-05
-
Date accepted2021-03-30
-
Date published2021-06-24
Improving the efficiency of relay protection at a mining and processing plant
The paper presents the results of constructing effective relay protection in the power supply system of a mining and processing plant (MPP). A brief description of the MPP is given, the power supply and substitution circuits used to calculate the short-circuit currents are given. A statistical analysis of failures in the electric network of the MPP has been carried out, which makes it possible to draw conclusions about the nature of failures ranges. Analysis of the registered faults shows that a significant part of them are line-to-earth faults, which in most cases turn into multiphase short circuits, which are interrupted by overcurrent protection. In order to improve the efficiency and reliability of the relay protection, the power supply scheme of the MPP was refined and analyzed. The calculation of the short-circuit currents was made, which made it possible to calculate the settings of the relay protection and give recommendations on the place of its installation and adjustment in order to ensure the normal operation of electricity consumers. To reduce the number of failures to the cable insert on the line leaving the administrative and household complex (AHC), and to increase the reliability of power supply to consumers, it is advisable to divide the capacities of the existing 10 kV line into two parallel ones by laying a second line. It is recommended to install a current cut-off on the line outgoing to the AHC, the feasibility of the installation of which was shown by calculations. This will reduce the chance of failures to the cable gland. Data on the setting currents of overcurrent protection and current cut-off are given on the selectivity card.
-
Date submitted2018-09-04
-
Date accepted2018-11-16
-
Date published2019-02-22
Development of an occupational safety management system based on the process approach
- Authors:
- V. A. Filimonov
- L. N. Gorina
The article discusses the relevance and possibility of using the process approach in the development and implementation of occupational safety management systems based on GOST 12.0.230-2007, which is the main document in this area for all industrial enterprises and organisations of the Russian Federation. The system of occupational safety management in the organisation is considered taking into account all its internal communications and input-output parameters. It is shown that the process approach used in the design of the occupational safety management system in the organisation, allows categorising the list of works (processes), participants, resources (responsible, performers, documents, etc.), the control and correction processes. The methodological substantiation of the process approach to the design of the occupational safety management system in the organisation is given, the basic issues of its applicability are considered. A context diagram of the process of an occupational safety management system is drawn in the IDEF0 graphical notation by means of the SADT structural analysis technology. The decomposition of the context diagram to the required levels of detail is presented and the balance factor of the models is calculated.
-
Date submitted2015-07-30
-
Date accepted2015-09-11
-
Date published2016-02-24
Principles of corporate communications management system development for mineral resources companies
- Authors:
- A. B. Makhovikov
The article shows the benefits of using unified communications for the management of mineral resources companies and discusses some principles of a modern corporate communications system providing the guaranteed encryption of all transmitted information (voice, text and files). The system structure, its operations and technologies, necessary for the creation of such a system, are substantiated. The secure corporate communication system developed at the National Mineral Resources University (Mining University) is described, and its comparison with other domestic and foreign systems is provided.
-
Date submitted2014-11-28
-
Date accepted2015-01-13
-
Date published2015-10-26
Nanobar code as multi-purpose two-dimensional notation with new features
- Authors:
- E. I. Pryakhin
The article gives an analysis of the current standard two-dimensional codes, showing their features and applications. It was concluded that the feasibility of developing a new type of two-dimensional codes, the Nanobar code (NBC), in which information can be open (available) and, if necessary, closed (unavailable) to the user through the use of cryptographic encryption techniques. At the same time the new codes provide a significant increase in the volume of coded information that allows us to recommend using them as a local database, in particular for the issue of electronic technological certificates and product passports, personal dog tags for the military, athletes and others. It is noted as an important characteristic that the Nanobar code is able to encode different types of digital information. Due to its characteristics, the NBC is proposed to use as an identification number and protect legal products against counterfeiting. Two variants of the NBC technology application are proposed – with laser printing and printer. For reading information from the NBC, special software was developed, including mobile applications that allow using a smartphone to read the NBC. The basic scope of the NBC application was suggested.
-
Date submitted2009-10-18
-
Date accepted2009-12-17
-
Date published2010-09-22
Reuse of development workings as an element of providing the effective coal output
- Authors:
- M. A. Ilyashov
The article contains the results of application in a coal mine of a combined way for protection and support of development workings. This method combines a frame support, anchors and a cast support strip erected behind the longwale. The geomechanical substantiation of technological parameters, regulations and the field for efficient use of this method are given. Its introduction has allowed to increase the loads on longwale and to lower labour content and expenses for maintenance of butt entries.
-
Date submitted2008-11-08
-
Date accepted2009-01-26
-
Date published2009-12-11
Principles optimization of expenses for the labour protection of the mining enterprises
Classification of damage from accidents and crashes is given. Procedure optimization expenses for a labour protection and definition of economically sound risk of accidents and crashes is offered. The estimation of economic efficiency of personnel development serving the self-propelled mining equipments on ore mine «Northern» of industrial complex «Pechenga Nikel» is carried out.
-
Date submitted1951-07-10
-
Date accepted1951-09-12
-
Date published1952-03-26
On the issue of protecting structures from the harmful effects of underground mining in coal and shale deposits with an unexplored nature of rock movement
- Authors:
- D. A. Kazakovskii
Until now, at newly developed deposits and at operating deposits with an unexplored nature of rock movement, the calculation of safety pillars in accordance with the recommendation of the "Rules for the Technical Operation of Mines" was carried out by analogy with other more or less studied deposits. However, there were no instructions on the selection of analog deposits, which could not but lead to an incorrect choice of parameters for calculating safety pillars. At present, it seems possible to give some guidelines on the selection of analog deposits based on accumulated factual data. These instructions can be used in calculating pillars during the design of mines and at operating deposits with an unexplored nature of rock movement. They can also be useful in calculating the profile lines of observation stations.