-
Date submitted2021-04-19
-
Date accepted2021-10-18
-
Date published2021-12-16
Mutual spectral densities calculation of the moments of resistance on the peat milling unit working bodies
- Authors:
- Konstantin V. Fomin
When performing technological operations in the peat industry, various units with milling-type working bodies are used. They differ in design, layout, number and type of cutting elements, operating modes, and may have one or more working bodies. During operation, random forces and moments act on the cutters, which have a dramatically variable nature, which is associated with the periodic interaction of the knives with the peat deposit, its structural heterogeneity, variations in the milling depth, physical and mechanical properties of peat, the rotational speed of the cutter and the movement speed of the machine. In this case, significant dynamic loads arise in the structural elements, which leads to a decrease in their reliability, deterioration of the energy characteristics of the engine operation and technical and economic indicators of use. In the dynamic analysis of drive elements, when using machines with several working bodies, it is necessary to know both spectral and mutual spectral load densities. For their calculation, expressions were obtained that take into account the physical and mechanical properties of peat, the operating modes of the unit and their probabilistic characteristics, as well as the design features of the working body. The expressions are obtained for the case when there are several working bodies with the same diameters and the number of knives in the cutting plane. In this case, the number of planes, width, type of cutting element and type of cutting (locked, semi-locked, etc.) may differ. As an example of using the developed approaches, the calculation of spectral and mutual spectral densities of moments on cutters and loads in the drive elements of the machine for surface-layer milling MTF-14 is presented.
-
Date submitted2021-02-20
-
Date accepted2021-05-21
-
Date published2021-09-20
Analysis of the screw press mouthpiece parameters for 3D extrusion of peat pieces of tubular type
The results of theoretical and experimental studies on the creation of a screw press composite mouthpiece screw press for 3D-forming of peat pieces of a tubular type in the field for intensifying the process of field drying of material in a complex mechanized pit are presented. The main purpose of the study was to substantiate the geometric and design parameters of the screw press composite mouthpiece of the spread machine for the production of peat-agglomerated products of the tubular type. The parameters of the mouthpiece are selected based on the geometric characteristics of the peat pieces. An increase in moisture loss during drying of peat-agglomerated products is provided by forming a peat piece in the form of a thick-walled pipe made of a peat raw materials composed of low and high decomposition degrees in a ratio of 1:3. Additive production of polymer-fiber peat composites by extrusion allows to produce products with improved mechanical properties in comparison with non-reinforced raw materials. The vertical arrangement of the peat tubular piece on the drying field allows to increase the loading of the field area by 10 %, increase the convective heat supply to the piece and reduce the contact coefficient of the piece with the field by three times in comparison with the peat spreading of the pieces in the form of a horizontal tape. Based on the analysis of the shape and size of the agglomerated products, the design of a screw press composite mouthpiece consisting of two conditional molding zones of various configurations has been developed. The article presents a parametric analysis of the volumetric productivity of a screw press with a composite mouthpiece of a tubular type, the energy intensity of mechanical processing is determined, the degree of mechanical processing of peat raw materials is estimated with the optimization of the screw parameters for the production of agglomerated products of a tubular type.
-
Date submitted2019-06-19
-
Date accepted2019-09-11
-
Date published2020-02-25
Method for estimating the spectrum density of the resistance moment on the working body of a peat milling unit
- Authors:
- K. V. Fomin
The main source of dynamic loads in the drive elements and the design of the peat milling unit is the working body. The forces of external resistance arising in the process of performing a technological operation are sharply variable, random in nature. The article proposes a model of formation of the moment of resistance on the mill when interacting with peat. The case when there are several cutting planes with the same radius at the ends of the cutting elements is considered. When developing the model, it was taken into account that the operating conditions of the knives, determined by the type of cutting (blocked, semi-blocked, etc.), their width and type in each cutting plane can vary. Factors that determine the nature of loading, such as the frequency of interaction of the cutting elements with the fallow and the randomness of the operating conditions of the unit, lead to the presentation of the loads in the form of a sequence of pulses with random parameters. Expressions are obtained for determining the spectral density of the moment of resistance on the mill at the design stage, taking into account its design, operating modes, physico-mechanical properties of peat and their probabilistic characteristics. To illustrate the application of the developed approaches, a technique is presented for determining the spectral density of the moment on the working body of deep milling machines and in their drive elements based on a linear model. An example of calculation is given, and the obtained expressions are verified on the basis of experimental data. The probabilistic characteristics of the loads on the mill serve as initial information for the dynamic analysis of the drive system and the design of the unit, its strength analysis, the selection of optimal parameters and operating modes.
-
Date submitted2017-12-28
-
Date accepted2018-03-03
-
Date published2018-06-22
Special features of a structure of technical operations for peat excavation with stage dewatering
- Authors:
- E. A. Kremcheev
A method of development of a technology of peat extraction for intensifying of dewatering which involves drying of peat raw materials in thick layers with a layer-by-layer harvesting into large-sized roll with further delivery to the field storage unit of the enlarged sizes is presented in the paper. Throughout the year storage raw materials may be transported to the customer or to the shopfloor for further processing. Considering dimension and mass characteristics, a crumbed peat of various moisture capacity is a major type of products to be of high demand. On the basis of the results of scientific studies regarding gravity dewatering of peat and its drying in field environment, the ways of intensifying of field dewatering of peat for extraction at shallow-peat lands and fine-limit fields are proposed. The presented results of the experimental performance of a technology of peat drying in thick layers with a layer-by-layer harvesting indicate an increase of seasonal harvesting and a decrease of the influence of unfavorable meteorological factors on the stability of the extraction process. Performed investigations allowed to develop a structure of technical operations for peat excavation with the stage dewatering in spreading and intermediate storage units providing rational state of the extraction process regarding a complex of technical factors. A suggested scheme of a process area for a primary and secondary period of deposit exploitation by a technology of peat excavation is considered.
-
Date submitted2015-10-05
-
Date accepted2015-12-14
-
Date published2016-08-22
Coal-peat compositions for co-combustion in local boilers
- Authors:
- A. V. Mikhailov
In article results of experiments on creation of coal and peat fuel compositions for burning in solid-fuel boilers are described. The main objective of research consisted in development of combination of coal dust and natural peat without binding additives. The role of peat consists that it increases efficiency of process of granulation, being natural binding. The method of granulation allows to utilize waste of the coal industry. Joint burning of two types of fuel – coal dust and peat reduces emission of sulfur dioxides. The cost of peat raw materials is lower, than artificial binding, applied to briquetting of coal dust. The composition of mix of coal dust and peat varied in the ratio 2:1, 1:1 and 1:2 in volume ratio at humidity of mix before extrusion of 65 %. In the course of preparatory operations of coal raw materials its crushing and sifting through sieve of 24 mesh (0,707 mm) was carried out. Procedure of hashing of samples of coal and peat was carried out before receiving homogeneous mixture. After hashing mix was located in piston press for receiving granules. Coal dust and wet peat pass semifixed extrusion on piston press with formation of cylindrical granules with a diameter of 16 mm. After extrusion of granule are dried to operational humidity of 25 %. Coal and peat fuel granules showed sufficient mechanical strength for transportation and power feed in solid-fuel boilers. Burning of coal and peat fuel granules in vitro at temperature of 800 °C does not lead to ashes agglomeration. The conducted preliminary researches showed prospects of utilization of coal waste by granulation method in mix with natural peat.
-
Date submitted2010-07-07
-
Date accepted2010-09-05
-
Date published2011-03-21
Choice of optimal parameters for transportation of frozen peat screw conveyor
- Authors:
- E. Yu. Stepuk
Peat for fuel and agriculture have long been mined in 23 countries. In order to improve the performance proposed to use the screw with the optimal angles rise to transport a frozen peat.
-
Date submitted2010-07-08
-
Date accepted2010-09-01
-
Date published2011-03-21
Stand for evaluating the efficiency of transport of peat
- Authors:
- E. Yu. Stepuk
- S. L. Ivanov
To reduce the use of manual labor in mining peat from deposits with the decrease of anthropogenic impacts on the environment has been developed the device with rational parameters allowing to produce therapeutic peat. In order to improve the performance proposed to use the screw with the optimal angles rise to transport both frozen and thawed peat.
-
Date submitted2009-09-22
-
Date accepted2009-11-08
-
Date published2010-06-25
Auger machine for year-round peat production
- Authors:
- P. G. Talalai
- E. Yu. Stepuk
Russian Federation can solve problems of local power and ecology, increasing of soil quality, rising of peat export by the developing of peat industry. To change over the peat plants to the year-round production cycle the auger machine is proposed.