Submit an Article
Become a reviewer
Vol 231
Pages:
225-234
Download volume:
RUS ENG
Article

Special features of a structure of technical operations for peat excavation with stage dewatering

Authors:
E. A. Kremcheev
About authors
  • Ph.D., Dr.Sci. associate professor Saint-Petersburg Mining University ▪ Orcid
Date submitted:
2017-12-28
Date accepted:
2018-03-03
Date published:
2018-06-22

Abstract

A method of development of a technology of peat extraction for intensifying of dewatering which involves drying of peat raw materials in thick layers with a layer-by-layer harvesting into large-sized roll with further delivery to the field storage unit of the enlarged sizes is presented in the paper. Throughout the year storage raw materials may be transported to the customer or to the shopfloor for further processing. Considering dimension and mass characteristics, a crumbed peat of various moisture capacity is a major type of products to be of high demand. On the basis of the results of scientific studies regarding gravity dewatering of peat and its drying in field environment, the ways of intensifying of field dewatering of peat for extraction at shallow-peat lands and fine-limit fields are proposed. The presented results of the experimental performance of a technology of peat drying in thick layers with a layer-by-layer harvesting indicate an increase of seasonal harvesting and a decrease of the influence of unfavorable meteorological factors on the stability of the extraction process. Performed investigations allowed to develop a structure of technical operations for peat excavation with the stage dewatering in spreading and intermediate storage units providing rational state of the extraction process regarding a complex of technical factors. A suggested scheme of a process area for a primary and secondary period of deposit exploitation by a technology of peat excavation is considered.

Область исследования:
Mining
Keywords:
peat dryinglayer excavationtechnology peatdepositexcavation drying time seasonal harvesting
10.25515/pmi.2018.3.225
Go to volume 231

Similar articles

Methods to enhance oil recovery in the process of complex field development of the Yarega oil and titanium deposit
2018 I. E. Dolgii
Designing of well trajectory for efficient drilling by rotary controlled systems
2018 M. V. Dvoinikov
Influence of post-welding processing on continuous corrosion rate and microstructure of welded joints of steel 20 and 30KHGSA
2018 A. M. Shchipachev, S. V. Gorbachev
Noncontact laser control of electric-physical parameters of semiconductor layers
2018 A. B. Fedortsov, A. S. Ivanov
Peculiarities of kinematics of rock mass shear during development of subseismic-scale faults
2018 A. V. Merzlikin, L. N. Zakharova
Extraction of platinum metals during procssing of chromium ores from dunnite deposits
2018 G. V. Petrov, Ya. M. Shneerson, Yu. V. Andreev