Method for estimating the spectrum density of the resistance moment on the working body of a peat milling unit
- Tver State Technical University
Abstract
The main source of dynamic loads in the drive elements and the design of the peat milling unit is the working body. The forces of external resistance arising in the process of performing a technological operation are sharply variable, random in nature. The article proposes a model of formation of the moment of resistance on the mill when interacting with peat. The case when there are several cutting planes with the same radius at the ends of the cutting elements is considered. When developing the model, it was taken into account that the operating conditions of the knives, determined by the type of cutting (blocked, semi-blocked, etc.), their width and type in each cutting plane can vary. Factors that determine the nature of loading, such as the frequency of interaction of the cutting elements with the fallow and the randomness of the operating conditions of the unit, lead to the presentation of the loads in the form of a sequence of pulses with random parameters. Expressions are obtained for determining the spectral density of the moment of resistance on the mill at the design stage, taking into account its design, operating modes, physico-mechanical properties of peat and their probabilistic characteristics. To illustrate the application of the developed approaches, a technique is presented for determining the spectral density of the moment on the working body of deep milling machines and in their drive elements based on a linear model. An example of calculation is given, and the obtained expressions are verified on the basis of experimental data. The probabilistic characteristics of the loads on the mill serve as initial information for the dynamic analysis of the drive system and the design of the unit, its strength analysis, the selection of optimal parameters and operating modes.
References
- Venttsel E.S., Ovcharov L.A. Theory of random processes and its engineering applications. Мoscow: Vysshaya shkola, 2000, p. 383 (in Russian).
- Gorlov I.V., Rakhutin M.G. The effect of stumpiness deposits on the reliability of peat machines. Gornyi informatsionno-analiticheskii byulleten. 2017. N 12, p. 139-145 (in Russian).
- Dokukin A.V., Krasnikov Yu.D., Khurgin Z.Ya. Statistical dynamics of mining machines. Мoscow: Mashinostroenie, 1978, p. 238 (in Russian).
- Krasnikov Yu.D. Simulation of the destruction of coal by cutting tools. Мoscow: Nauka, 1981, p. 181 (in Russian).
- Kopenkin V.D., Kopenkina L.V., Samsonov L.N. The development of milling machines in peat production (analysis, prospects). Gornyi informatsionno-analiticheskii byulleten. 2003. N 10, p. 204-207 (in Russian).
- Levin B.R. Theoretical Foundations of Statistical Radio Engineering. Мoscow: Radio i svyaz, 1989, p. 656 (in Russian).
- Panov V.V., Misnikov O.S. Peat production trends in Russia. Gornyi zhurnal. 2015. N 7, p. 108-112 (in Russian).
- Samsonov L.N., Kochedykov A.K., Fomin K.V. Load analysis in the drive elements of the milling unit MP-20. Tekhnologiya i kompleksnaya mekhanizatsiya torfyanogo proizvodstva: Sb. nauch. tr. Tverskoi gosudarstvennyi tekhnicheskii universitet. Tver, 2000. Iss. 11, p. 120-123 (in Russian).
- Samsonov L.N., Fomin K.V. Determination of the probabilistic characteristics of the loading moment on the working body of the peat milling unit. Izvestiya vysshikh uchebnykh zavedenii. Gornyi zhurnal. 2003. N 3, p. 106-112 (in Russian).
- Samsonov L.N., Fomin K.V. Elements of the statistical dynamics of peat milling aggregates. Tverskoi gosudarstvennyi tekhnicheskii universitet. Tver, 2005, p. 168 (in Russian).
- Samsonov L.N. Peat deposit milling. Мoscow: Nedra, 1985, p. 211 (in Russian).
- Svetlitskii V.A. Statistical mechanics and reliability theory. Мoscow: Izdatelstvo MGTU im Baumana, 2002, p. 504
- (in Russian).
- Tikhonov V.I. Statistical Radio Engineering. Мoscow: Radio i svyaz, 1982, p. 625 (in Russian).
- Zyuzin B.F., Misnikov O.S., Panov V.V., Kopenkina L.V. Russian peat industry: Results of the past, view into the future. Gornyi zhurnal. 2013. N 5, p. 73-76 (in Russian).
- Fomin K.V. Modeling and analysis of the moment of loading on the working body of the peat milling unit. Gornyi informatsionno-analiticheskii byulleten. 2000. Vol. 2, p. 222-226 (in Russian).
- Fomin K.V., Krylov K.S., Kharlamov V.E. Modeling and analysis of the moment of loading on the working body of the machine for deep milling in the interaction with wood inclusions. Trudy INSTORFA. 2017. N 15 (68), p. 38-44 (in Russian).
- Kochedykov A.K., Komarov Yu.S., Konstantinov E.A., Fedunov I.A., Popovich V.M. Milling machine for the preparation and repair of production facilities MP-20. Torfyanaya promyshlennost. 1989. N 8, p. 7-8 (in Russian).
- Loren d. Lutes, Shahram Sarkani. Random vibrations: analysis of structural and Mechanical systems. Butterworth – Heinemann. 2004, p. 650.