-
Date submitted2022-10-04
-
Date accepted2024-03-05
-
Date published2024-08-26
Localization and involvement in development of residual recoverable reserves of a multilayer oil field
During waterflooding of a multilayer oil field there is a constant deterioration of the structure and composition of residual reserves due to geological and technological reasons. The largest share of residual reserves is localized in pillars, which arise from uneven development of the production facility and are undrained or poorly drained zones. The results of a quantitative assessment of the distribution of residual oil reserves in the Middle and Upper Devonian deposits of the Romashkinskoe oil field of the Republic of Tatarstan are presented. A retrospective method is proposed to identify reserves by analyzing and summarizing historical exploration data and the long history of reservoir development, and a calculation algorithm is proposed to quantify them. It has been established that residual oil reserves are localized in rows of dividing and injection wells, as well as in the central rows of producing wells in a three-line drive, in abandoned and piezometric wells, in the areas adjacent to the zones of reservoir confluence, pinch-out, oil-bearing contours, distribution of reservoirs with deteriorated porosity and permeability properties. Depending on geological conditions, algorithms for selecting geological and technical measures to include localized reserves in development and forecasting production profiles were proposed. According to the proposed method, residual recoverable reserves were identified and a number of wells were recommended for experimental works on their additional recovery: in well 16 (hereinafter in the text, conventional well numbers are used) after isolation of overlying high-water-cut formations, the additional perforation was carried out and oil flow was obtained. Additional perforation in well 6 resulted in oil recovery during development as well. Thus, the developed approaches to identifying residual recoverable reserves and patterns of their spatial distribution can be recommended in other multilayer oil fields with a long history of development.
-
Date submitted2022-05-23
-
Date accepted2022-07-21
-
Date published2023-02-27
Alluvial tin mining by spray-suction borehole method: a case study on remaining alluvial tin reserves in Bangka Belitung, Indonesia
The area of the Bangka Belitung Islands, which is a potential area for alluvial tin deposits in Indonesia, has been affected by the destruction of tin reserves on the mainland due to rampant artisanal mining, which has left remnants of small-dimensional reserves. The remnants of these reserves can no longer be mined using the hydraulic mining of open pit method due to the small dimensions of the deposits. The hypothesis is that such sedimentary conditions can only be mined by the borehole method. This research aimed to design tools and perform test mining using the borehole method with a spray-suction mechanism. This research produced a novelty, namely, a method and parameters for alluvial tin deposits mining using borehole mining methods, such as the excavation capacity, excavation radius, mining recovery, and dilution factor. The benefit of this research is expected to provide an opportunity to increase the amount of onshore alluvial tin reserves to support tin production.
-
Date submitted2021-02-24
-
Date accepted2021-10-18
-
Date published2021-12-16
A probabilistic approach to the dynamic cut-off grade assessment
Cut-off grade is an important conditioning parameter that determines the quantity and quality of recoverable reserves and development efficiency. Today, Russian mining companies operate with certified quality requirements. By setting permanent quality requirements, the government seeks to prevent depletion of reserves, reduced production during periods of falling prices, and decreased budget revenues, expressing the interests of all members of society. But to what extent do the permanent quality requirements protect the interests of the state? The answer to this question is ambiguous and does not lie on the surface. The State Commission for Reserves and domestic researchers are working to find a rational solution to the problem of quality requirements. One solution is dynamic quality requirements. The effectiveness of their application has been proven for individual mining companies, but it is incorrect to transfer these conclusions to the entire mineral resource base of the country. This article presents a new approach to determining the dynamic cut-off grade, which varies depending on the price of minerals. The dynamic cut-off grade is proposed to be determined based on the indicators of constant requirements to the quality of exploration work, using the maximum allowable costs in the region. The approach allows to calculate the effect of the introduction of dynamic cut-off grade in the practice of subsurface use for the state (in the form of the amount of taxes received) and for subsoil users (in the form of the amount of income). For a group of gold-bearing deposits with open-pit mining method, it was established that the development of reserves using dynamic values of the cut-off grade in periods of price changes ensures compliance with the interests of the state and subsoil users.
-
Date submitted2018-05-22
-
Date accepted2018-07-04
-
Date published2018-10-24
Cost assessment of gold ore deposits adjusted for capital investment
- Authors:
- A. Yu. Zaitsev
The paper focuses on the problems of geologic and economic assessment of mineral deposits. Existing methods have certain advantages and disadvantages, but always rely on unified assessment criteria that fail to take into account specific parameters of each deposit. The author proposes a method of quick and simple cost assessment of gold ore deposits based on ore reserves data. Suggested approach allows to evaluate a true price of gold ore deposits that takes into account field preparation and development costs, as well as to calculate threshold (recommended) amount of investment. Besides that, the method permits to assess the contribution that mineral reserves and resources make to the cumulative market price of the mining company. The method is based on the analysis of empirical data from actual purchases of gold ore (and associated metals) deposits made by Polymetal International PLC. The results of statistical research are incorporated in a formula of threshold deposit price taking into account field preparation and development costs. Comparison between deposit prices obtained from actual purchase deals and forecast results demonstrates high convergence rate (R = 0.97). The greatest error in the forecast results is attributed to insufficient attention to the geographical position of deposits, existence of infrastructure and relevant facilities. The method has been tested on three purchases of gold ore assets made by Polymetal International PLC and demonstrated high convergence with actual deal prices.
-
Date submitted2014-06-23
-
Date accepted2014-09-15
-
Date published2014-12-22
Topical issues of the management of extraction of underground waters on the territory of the Russian Federation
- Authors:
- N. V. Pashkevich
- E. I. Golovina
Water is a key component of our environment; it is a renewable, limited and vulnerable natural resource, which provides for the economic, social, and environmental well-being of the population. The modern system of taxation and regulation of subsoil use in the extraction of groundwater is currently imperfect and has definite disadvantages, among them not enough control of natural resources by the state, the commercialization stage of licensing, and the budget deficit, which is passed on to other areas of the national economy. General information about the state of the underground water supply in Russia, and the negative trends of underground water use are presented. The system of licensing underground water intakes in Germany is briefly described; some measures to improve the system of man-agement of Russia’s underground waters fund are suggested.
-
Date submitted2009-10-13
-
Date accepted2009-12-29
-
Date published2010-09-22
Assessment of the level of technological production of coal reserves in mine fields with intensive mining of fiat-lying coal seams
- Authors:
- S. G. Baranov
- M. A. Rozenbaum
The levels of technological production of coal reserves in the stoping faces have been determined depending on the main determining factors, such as suitability of conditions, their preparation and equipment of longwalls.
-
Date submitted2009-07-29
-
Date accepted2009-09-29
-
Date published2010-04-22
State examination of mineral reserves in the system of wise utilization of the earth’s interior
- Authors:
- Yu. A. Podturkin
The major problem of bodies of the government in sphere of regulation of attitudes protection of reserves creation of conditions for rational use of resources. The basic role in its decision is played with examination protection of reserves. Maintenance of effective carrying out of examination demands its constant perfection with reference to market conditions with use of the international criteria regarding both calculation and an estimation of stocks, and drawing up design and the engineering specifications on development of mineral deposits.
-
Date submitted2009-07-03
-
Date accepted2009-09-10
-
Date published2010-04-22
Methods for calculation of methane reserves in coal seams as independent mineral resource
Development of nonconventional resources of natural gas such as coalbed methane (CBM) demands new approaches to reserves’ calculation and economic estimation of coalbed methane fields. Experts of OS «Gazprom promgaz» have developed the method of CBM reserves calculation as independent mineral based on international and russian experience in CBM fields prospecting and production activity of CBM. The article is devoted to basic principles of new technique on an example of Taldinskoe CBM field reserves’ calculation.
-
Date submitted2009-07-02
-
Date accepted2009-09-06
-
Date published2010-04-22
Monitoring of actual reserves as an instrument for higher assessment of cost of mining business under conditions of adaptation of russian assessments of reserves to international standards
- Authors:
- S. V. Shaklein
The international norms and standards, standard terminology in systems of the reporting about a condition of stocks and resources are considered. Methodical подходы to conducting monitoring reliability of stocks are suggested.
-
Date submitted2009-07-12
-
Date accepted2009-09-08
-
Date published2010-04-22
Account and movement of reserves in the information system of Silvinit co.
- Authors:
- A. V. Kataev
- S. N. Kutovoi
- E. M. Efimov
- M. V. Gilev
At ore mines of the Silvinit Co. for accounting and movement of reserves are developed and used special tools, using GIS within the information system. Their use allows to automate accounting and monitoring of status and movement of stocks, including the formation of the reporting tables.
-
Date submitted2008-10-24
-
Date accepted2008-12-01
-
Date published2009-12-11
History and prospects for the development of the karelian isthmus facing stone mineral base
- Authors:
- A. Y. Tutakova
The prerequisites for the development of the deposits, the previous studies and the current state of Karelian Isthmus facing stone sources as well as their comparison with those of other regions of Northwestern Federal Districts of Russia are considered. The objects for top-priority geological prospecting are determined.
-
Date submitted1951-07-01
-
Date accepted1951-09-09
-
Date published1952-03-26
Methodology for assessing the accuracy of mineral reserves calculations
- Authors:
- D. A. Kazakovskii
The currently known methods of calculating reserves cover all cases and specific conditions of various deposits with sufficient completeness. The correct choice of a method from among the existing ones ensures obtaining results with an error, the magnitude of which is determined not so much by the calculation methods as by the detail of exploration. From this point of view, the development of new calculation methods (especially based on preliminary and detailed exploration data) is not a pressing task. It should be borne in mind that from the point of view of accuracy, all calculation methods used in practice are approximately equivalent, with the exception of the arithmetic mean method. Methods for calculating reserves in operational exploration require further development, mainly in the direction of simplifying the calculation technique associated with the use of the numerous data that must be dealt with in these cases. Here, smoothing techniques should be used more widely, as well as methods of mathematical statistics (in particular, correlation theory) to clarify the patterns of mineralization, as well as to delineate ore deposits. Special mining-geometrical graphs should be used more widely, allowing cumbersome calculations to be replaced by comparatively simple graphical operations. In connection with the large number of samples and tested workings, the use of graphs has significantly simplified the calculation of reserves.