-
Date submitted2022-06-20
-
Date accepted2022-10-07
-
Date published2022-11-03
Evaluation of deformation characteristics of brittle rocks beyond the limit of strength in the mode of uniaxial servohydraulic loading
One of the most reliable methods for assessing the physical and mechanical properties of rocks as a result of their destruction are laboratory tests using hard or servo-driven test presses. They allow to obtain reliable information about changes in these properties beyond the limit of compressive strength. The results of laboratory tests of rich sulfide ore samples are presented, which made it possible to obtain graphs of their extreme deformation. Both monolithic samples and samples with stress concentrators in the form of circular holes with a diameter of 3, 5 and 10 mm were tested. It was revealed that during the destruction of the samples, the modules of elasticity and deformation decrease by 1.5-2 times, and in the zone of residual strength – by 5-7 times.
-
Date submitted2021-12-16
-
Date accepted2022-04-07
-
Date published2022-07-13
The Upper Kotlin clays of the Saint Petersburg region as a foundation and medium for unique facilities: an engineering-geological and geotechnical analysis
- Authors:
- Regina E. Dashko
- Georgiy A. Lokhmatikov
The article reviews the issues concerned with correctness of the engineering-geological and hydrogeological assessment of the Upper Kotlin clays, which serve as the foundation or host medium for facilities of various applications. It is claimed that the Upper Kotlin clays should be regarded as a fissured-block medium and, consequently, their assessment as an absolutely impermeablestratum should be totally excluded. Presence of a high-pressure Vendian aquifer in the lower part of the geological profile of the Vendian sediments causes inflow of these saline waters through the fissured clay strata, which promotes upheaval of tunnels as well as corrosion of their lining. The nature of the corrosion processes is defined not only by the chemical composition and physical and chemical features of these waters, but also by the biochemical factor, i.e. the availability of a rich microbial community. For the first time ever, the effect of saline water inflow into the Vendian complex on negative transformation of the clay blocks was studied. Experimental results revealed a decrease in the clay shear resistance caused by transformation of the structural bonds and microbial activity with the clay’s physical state being unchanged. Typification of the Upper Kotlin clay section has been performed for the region of Saint Petersburg in terms of the complexity of surface and underground building conditions. Fissuring of the bedclays, the possibility of confined groundwater inflow through the fissured strata and the consequent reduction of the block strength as well as the active corrosion of underground load-bearing structures must be taken into account in designing unique and typical surface and underground facilities and have to be incorporated into the normative documents.
-
Date submitted2021-01-20
-
Date accepted2021-03-29
-
Date published2021-09-20
Analysis of the causes of engineering structures deformations at gas industry facilities in the permafrost zone
Construction of oil and gas infrastructure facilities on permafrost soils is the most important task of increasing the raw material base of the entire fuel and energy industry in Russia. Permafrost soil is a complex, multicomponent system, state of which depends on many factors. Buildings and structures built under such conditions, on the one hand, have a complex thermal effect on permafrost soils, and on the other hand, they perceive the consequences of changes in the characteristics of such soils. This situation leads to the fact that buildings and structures on permafrost soil during their life cycle are subject to complex and poorly predictable deformations. Article presents the results of a study for various degradation processes of permafrost soils that can be implemented at construction sites of industrial facilities. Analysis of the deformations causes for engineering structures at the gas industry in the permafrost zone is carried out. Series of reasons causing such deformations have been investigated. Comprehensive criterion for assessing changes in permafrost-geological conditions of industrial sites is proposed. It is suggested to apply the method of calculating the individual characteristics for the temperature regime of the territory to monitor and assess the conditions of heat exchange and predict changes in the geocryological conditions of permafrost soil.
-
Date submitted2019-07-13
-
Date accepted2019-08-31
-
Date published2019-12-24
Method for predicting the stress-strain state of the vertical shaft lining at the drift landing section in saliferous rocks
The article proposes a method for predicting the stress-strain state of the vertical shaft lining in saliferous rocks at the drift landing section. The paper considers the development of geomechanical processes in the saliferous rock in the landing area, the support is viewed as a two-layer medium: the inner layer is concrete, the outer layer is compensation material. With this in view, the paper solves the problem of continuum mechanics in a spatial setting, taking into account the long-term deformation of salts and the compressibility of the compensation layer. Long-term deformation of saliferous rocks is described using the viscoplastic model of salt deformation into the numerical model, and the crushable foam model to simulate the deformation of the compensation layer. This approach considers all stages of the deformation of the compensation layer material and the development of long-term deformations of saliferous rocks, which makes it possible to increase the reliability of the forecast of the stress-strain state of the vertical shaft lining.
-
Date submitted2018-08-29
-
Date accepted2018-10-25
-
Date published2019-02-22
The study of the effect of temperature on the ability of metals to accumulate energy during their plastic deformation
The subject of research is the surface layer of highly loaded parts, friction units of mining machines and equipment. The article presents a theoretical analysis of the factors that determine the ability of the material of the surface layer of parts to accumulate energy in the process of plastic deformation. It is suggested that the activation character of the accumulation of energy by metals. Based on the theory of diffusion, it was shown that the mobility of atoms, as well as the accumulated energy, are determined by the ratio of the test temperature to the melting temperature.
-
Date submitted2010-07-23
-
Date accepted2010-09-28
-
Date published2011-03-21
Sistaining mining in whole different rigidity
- Authors:
- L. K. Gorshkov
- S. G. Kokoev
Studies conducted in the mines «Rostovugol», showed that, for assessing the sustainability of preparatory excavations in the management of sewage treatment works is enough to determine the allowable values of convergence of the roof and ground-level workings and potential energy of elastic deformation of the pillars. These indicators can be used in the coal mines of other basins.
-
Date submitted2009-10-14
-
Date accepted2009-12-28
-
Date published2010-09-22
Geodynamic model of hydrogen sulphide’s formation in natural gas and oil in the process of rocks impulsive compression under conditions оf earthquakes
- Authors:
- A. V. Petukhov
By experiments, conducted on the installation like Bridgeman’s anvil it was determined that under conditions of high pressure, displacement deformations and elastic wave’s effect of short duration, sulphates are reclaimed by hydrocarbons. As a result of this reaction sulphur and hydrogen sulphide are produced.
-
Date submitted2009-07-18
-
Date accepted2009-09-30
-
Date published2010-04-22
Account of stress gradients in rock mass in designing of mining constructions
- Authors:
- S. V. Suknyov
- M. D. Novopashin
Using the gradient approach the criteria of shear and tensile cracking are developed in compression under conditions of stress concentrations near mine workings. Considering the size effect, a function type of local strength is determined, expressions for critical pressure are derived and comparison between analytical and experimental data is performed.
-
Date submitted2009-07-24
-
Date accepted2009-09-20
-
Date published2010-04-22
Investigation of stress-strain state of floor of the dividing mass of deep-lying ore mines at Тalnakh
The paper contains the results and analysis of the formation of stress-strain state in blocky structure enclosing the dividing mass. The regularities were established on the influence of blocky structure undermining on stress state of the floor of dividing mass. Recommendations are given for the safe mining in the dividing rock mass.
-
Date submitted2009-07-09
-
Date accepted2009-09-03
-
Date published2010-04-22
The stress-strain state of the massive of the loose ores in the Yakovlevsky deposit around the minings which were drilled with the combines or with drilling-blast technology
The article presents the consistent patterns of the changes in stress-strain state of the massive by the minings of the first stage of protective overlapping in the Yakovlevsky deposit. The change of the stress-strain condition of the rock massive, which is weaked by the mining was determined by the method of finite elements. The stresses distribution in the massive, the displacement of the contour of the minings, the size of conditional zones of non-linear deformations has been obtained. For stoping passes at the first stage the cutting with combine and application of fastening with the anchors has been suggested.
-
Date submitted2009-07-10
-
Date accepted2009-09-03
-
Date published2010-04-22
Lateral earth pressure in rock mass
- Authors:
- A. G. Olovyanny
The stress state of rock mass is determined by weight of overburden and the lateral earth pressure. It was stated that the stress state of rock mass has been originated with contribution of the lateral earth pressure in which the important role play the viscoelastic properties of rocks was obtained, which gives more precise assessments of stress state in rock mass than the determined ones with account of only elastic behavior.
-
Date submitted2009-07-16
-
Date accepted2009-09-28
-
Date published2010-04-22
Efficient numerical methods for geotechnical problems
- Authors:
- M. A. Karasev
This article give a general overview of methods to solve large scale geotechnical problems, nonlinear high deformation and plastic problems, self contact of strata and application of high performance computing.
-
Date submitted2009-07-09
-
Date accepted2009-09-01
-
Date published2010-04-22
Method of calculation stability of the open pit edges
- Authors:
- A. V. Chebakov
During the opencast mining operations with bating and opening-up of new horizons as a result of the process duration in the near-edge rock mass, fatigue accumulates, which leads to slope deformations in the form of slide rocks, rock falls, roof breaks, and, in some cases, large-scale landslides. Given that the open pit edges are complex engineering structures, on the state of which mining operations effectiveness and safety depend, their stability control is a very urgent problem.