-
Date submitted2018-11-05
-
Date accepted2019-01-15
-
Date published2019-04-23
Some aspects of antifriction coatings application efficiency by means of finishing nonabrasive antifriction treatment
- Authors:
- M. I. Sidorov
- A. V. Ragutkin
- M. E. Stavrovskij
The article analyzes the effectiveness of anti-friction coatings obtained by finishing anti-friction non-abrasive treatment (FANT), including processing in metal-clad technological media, in order to improve the performance of machine parts. The analysis of the application of coating technologies FANT on materials operating at elevated temperature and at high pressure, as well as with high values of energy fluxes in the environment, was carried out. The results of the application of various compositions of cladding elements and FANT technologies for various engineering products are presented. The results of studies of the use of FANT technologies developed with the participation of the authors confirm their high efficiency for improving the wear resistance of artillery gun barrel materials. Decrease in wear ranging from two to three times compare to regular technology. Field testing of anti-friction anti-wear coatings, carried out by specialists of the FSE SRI «Geodesia», confirmed the prospects of this direction for increasing the survivability of artillery barrels.
-
Date submitted2018-08-30
-
Date accepted2018-10-26
-
Date published2019-02-22
Study of bearing units wear resistance of engines career dump trucks, working in fretting corrosion conditions
- Authors:
- Ju. Olt
- V. V. Maksarov
- V. A. Krasnyy
The occurrence of fretting corrosion on nominally fixed surfaces of high-loaded parts of mining machines and mechanisms is considered. Examples of wear and damage of critical parts, bearing assemblies of engines of dump trucks in fretting conditions are given. The mechanisms of fretting corrosion when using wear-resistant coatings are considered. It is noted that when choosing protective thin-layer coatings that provide an increase in the fretting-resistance of surfaces of tightly contacting parts, it is necessary to take into account both their wear resistance and the ability to resist shear. At the same time, the thickness of such coatings allows preserving, during operation, those provided during the assembly of the tension, without disturbing the maintainability of the nodes. The results of research of fretting wear of a number of coatings on a special installation are given. The mechanisms of wear of a number of thin-layer coatings based on friction-mechanical brazing, polymer fluorocarbon composition, solid lubricant coating using scanning electron microscopy were studied. Recommendations on the use of the studied thin-layer coatings for high-loaded parts of mining machines operating in fretting corrosion conditions have been developed. The aim of the work was to study the effect of a number of thin-layer coatings on the wear of highly loaded connections of the mechanisms of mining machines, in particular bearing assemblies of quarry dump trucks operating under fretting corrosion conditions.
-
Date submitted2018-05-07
-
Date accepted2018-07-06
-
Date published2018-10-24
Hydraulic transportation of thickened tailings of iron ore processing at Kachkanarsky GOK based on results of laboratory and pilot tests of hydrotransport system
- Authors:
- V. I. Aleksandrov
- M. A. Vasileva
The object of study is the system of hydrotransport of iron ore processing tailings at JSC «EVRAZ Kachkanarsky GOK». The aim of the work was to determine the parameters of the hydraulic transport of tailings of the iron ore enrichment at weight concentrations of the solid phase from 30 to 70 % and to develop recommendations for the industrial operation of hydraulic transport systems of highly concentrated slurries of the Tailing Facilities of the Kachkanarsky GOK. Laboratory studies of the parameters of hydrotransport of thickened tail pulps were carried out with the development of a calculation method; pilot tests of the hydrotransport system under the conditions of the Tailing Facilities of the Kachkanarsky GOK. It has been established that using polyurethane coatings on the inner surface of the slurry lines significantly (1.75 times) decrease the specific pressure loss on the hydrotransport of thickened fluids. This allows to significantly increase the range of transportation for placing tailings in the distant parts of the storage zone. The introduction of research results is in the project of reconstruction and development of the tailing facility of the TF of the Kachkanarsky GOK for the period 2018-2020. It is proposed to use the results of work in the project of reconstruction of the hydraulic transport system at the TF of the Kachkanarsky GOK by switching to the hydraulic transport of slurries thickened to weight concentrations of 35-40 % in the slurry pipes with an internal polyurethane coating, which will ensure energy saving in the hydraulic transport process.
-
Date submitted2017-09-11
-
Date accepted2017-10-30
-
Date published2018-02-22
Provision of adhesion strength of gas-thermal coatings on piston rings of quarry transport engines
- Authors:
- Yu. Olt
- V. V. Maksarov
- V. A. Krasnyi
The main trend in the development of modern diesel engine manufacturign is the creation of high-powered, reliable and economical internal combustion engines (ICE), which are widely used in various industries, including mining machinery. The application of the methods of gas-thermal and gas-plasma coating for obtaining wear-resistant layers on piston rings for large internal combustion engines of quarry transport – diesel locomotives and dump trucks- is considered. It is shown that the abrasive-jet machining of base coat is widely used as a preparatory operation before coating process, and the roughness of the working surface of the rings after abrasive-jet machining has a significant impact on the adhesion strength of the coating with the base material. The selection of the surface roughness and the conditions of abrasive-jet machining for increasing the coating adhesion strength to the base coat significantly determines both the thickness of the coating and the reliability of the part itself. The aim of the paper is to investigate the dependence of the adhesion strength of a gas-thermal wear-resistant coating of piston rings of large engines of quarry transport, including dump trucks and diesel locomotives, from the roughness of the working surface after abrasive-jet machining, which in turn depends on its modes (distance to the nozzle exit section, the number of passes, the working air pressure, the shot change rate). The working surface adhesion strength of piston rings with diameter of 210 mm coated with molybdenum and steel wire composition was investigated by the twisting angle at which the coating peeled. It is shown that the roughness providing a twist angle greater than 35° should be more than 22 μm, which does not cause coating peeling off. Modes of abrasive-jet machining providing the specified values of roughness: working air pressure is 0.4 MPa, distance to the nozzle exit section is 110 mm, the number of passes is 2, and the shot changes after processing 40 mandrels.
-
Date submitted2010-07-13
-
Date accepted2010-09-13
-
Date published2011-03-21
Actual ways of increasing the effectiveness of facilities for hydrotransport mountain companies
- Authors:
- A. A. Velnikovskiy
Shown the necessity of improving hydrotransport installations. Built a functional model of the hydrotransport system. As a result of its analysis identified the most relevant ways to improve efficiency of hydrotransport on mining enterprises.