SOME ASPECTS OF ANTIFRICTION COATINGS APPLICATION EFFICIENCY BY MEANS OF FINISHING NONABRASIVE ANTIFRICTION TREATMENT
- 1 — MIREA – Russian Technological University
- 2 — MIREA – Russian Technological University
- 3 — SRI «Center for Environmental Industrial Policy»
Abstract
The article analyzes the effectiveness of anti-friction coatings obtained by finishing anti-friction non-abrasive treatment (FANT), including processing in metal-clad technological media, in order to improve the performance of machine parts. The analysis of the application of coating technologies FANT on materials operating at elevated temperature and at high pressure, as well as with high values of energy fluxes in the environment, was carried out. The results of the application of various compositions of cladding elements and FANT technologies for various engineering products are presented. The results of studies of the use of FANT technologies developed with the participation of the authors confirm their high efficiency for improving the wear resistance of artillery gun barrel materials. Decrease in wear ranging from two to three times compare to regular technology. Field testing of anti-friction anti-wear coatings, carried out by specialists of the FSE SRI «Geodesia», confirmed the prospects of this direction for increasing the survivability of artillery barrels.
References
- Prokopenko A.K., S.I.Golina, D.N.Garkunov et al. A.s. 1203126 SSSR. Composition for coating. Publ. 07.01.1986. Bul. N 1 (in Russian).
- Prokopenko A.K., Voronin E.A., Yudin M.M. et al. A.s. 1686033 SSSR. The method of applying antifriction coatings on parts of friction units. Publ. 23.10.1991. Bul. N 39 (in Russian).
- Prokopenko A.K., Bystrov V.N., Garkunov D.N. et al. A.s. 1282860 SSSR. The method of running-in mating friction surfaces. Publ. 15.01.1987. Bul. N 2 (in Russian).
- Prokopenko A.K., Yudin V.M. A.s. 1622671 SSSR. Composition for running-in parts of friction units. Publ. 23.01.1991. Bul. N 3 (in Russian).
- Garkunov D.N. Scientific discoveries in the tribological technique. The effect of wearlessness in friction. Hydrogen Wear Metals. MSKhA. Мoscow, 2004, p. 384 (in Russian).
- Zelenko V.K. Increasing the survivability of the trunks of small arms through the use of anti-wear tribological structures. Izvestiya TulGU. Tekhnicheskie nauki. 2011. N 1, p. 252-260 (in Russian).
- Karyukin S.P. S, Mitrokhin O.V. Approach to ensuring the survivability of artillery barrels. Voennaya mysl'. 2012. N 1, p. 72-78 (in Russian).
- Emel'yanov S.G., Lukashev E.A., Oleinik A.V., Stavpovskii M.E., Fpolov V.A., Puzryakov A.F. The complex of technologies for applying multifunctional coatings to improve the efficiency of machine parts. Tekhnologiya mashinostroeniya. 2009. N 9, p. 33-35 (in Russian).
- Lukashev E.A., Stavrovskii M.E., Oleinik A.V., Emel'yanov S.G., Yudin V.M. Methods of tribochemical research. Kursk. tekhnicheskii un-t. Kursk, 2006, p. 282 (in Russian).
- Burumkulov F.Kh., Belyakov A.V., Kremeshnyi V.M., Lel'chuk L.M. Patent 2119552 RF. The method of processing the surface of the friction unit and the device for its implementation. Publ.27.09.1998 (in Russian).
- Pol'tser G. Fundamentals of friction coating in selective transmission conditions. Remont, vosstanovlenie, modernizatsiya. 2010. N 10, p. 23-28 (in Russian).
- Strel'tsov V.V. Acceleration of running-in parts during bench running-in of repaired internal combustion engines (on the example of 3M3-53 and ZIL-130): The author ... Doctor of Engineering Sciences. MGAU. Мoscow, 1993, p. 41 (in Russian).
- Terkhunov A.G. Method of finishing antifriction non-abrasive treatment (FANT) of cylinders and crankshafts of internal combustion engines. Trenie, iznos i smazochnye materialy: Trudy Mezhd. nauch. konf. Tashkent: Izd-vo AN Uzbekskoi SSR. 1985. Vol. 5, p. 3-4 (in Russian).
- Emel'yanov S.G., Lukashev E.A., Oleinik A.V., Stavpovskii M.E., Frolov V.A., Puzryakov A.F. Technologies for applying multifunctional coatings on machine parts. Svarochnoe proizvodstvo. 2010. N 8, p. 47-49 (in Russian).
- Turchkov E.V. Finishing antifriction non-abrasive treatment of friction surfaces. Friktsionnoe vzaimodeistvie tverdykh tel s uchetom sredy. Ivanovskii gosudarstvennyi universitet. Ivanovo, 1982, p. 135-138 (in Russian).
- Pol'tser G., Firkovskii A., Lande I. et al. Finishing antifriction non-abrasive treatment (FANT) and selective transfer. Dolgovechnost' trushchikhsya detalei mashin: Sb. statei. Iss. 5. Мoscow: Mashinostroenie. 1990, p. 86-122 (in Russian).
- Strel'tsov V.V., Prikhod'ko I.L., Nekrasov S.S. et al. Finishing antifriction non-abrasive treatment (FANT) of parts. ONTI PNTs RAN. Pushchino, 1996, p. 107 (in Russian).