Determination of optimum degree and economically acceptable limits of iron ore beneficiation and metallization of iron ore pellets
About authors
- 1 — Professor G.V. Plekhanov Saint Petersburg Mining Institute
- 2 — Postgraduate student G.V. Plekhanov Saint Petersburg Mining Institute
Abstract
The research shows an effect of initial raw material’s dressing and metallization on the economics of metallized pellet’s production and utilization. We suggest using criterion, which reflects maximum efficiency per ton of a steel or a cast iron to determine an optimal degree and an economic tolerable limits of iron-ore-dressing and metallization of the iron-ore pellets. The research describes main conditions of optimal and tolerable iron-ore-dressing and metallization of the ironore pellets limit’s displacement.
Область исследования:
(Archived) Economics and management
Funding:
None
Similar articles
Resource-saving technologies of heat energy production on the basis of solid combustible carbon containing waste processing
2007 Yu. V. Shuvalov, A. N. Nikulin
Dissection and correlation of red-colored strata on the basis of X-ray diffractometric analysis of clay fraction minerals
2007 A. G. Bogatyreva