Determination of optimum degree and economically acceptable limits of iron ore beneficiation and metallization of iron ore pellets
About authors
- 1 — Professor G.V. Plekhanov Saint Petersburg Mining Institute
- 2 — Postgraduate student G.V. Plekhanov Saint Petersburg Mining Institute
Abstract
The research shows an effect of initial raw material’s dressing and metallization on the economics of metallized pellet’s production and utilization. We suggest using criterion, which reflects maximum efficiency per ton of a steel or a cast iron to determine an optimal degree and an economic tolerable limits of iron-ore-dressing and metallization of the iron-ore pellets. The research describes main conditions of optimal and tolerable iron-ore-dressing and metallization of the ironore pellets limit’s displacement.
Similar articles
Dissection and correlation of red-colored strata on the basis of X-ray diffractometric analysis of clay fraction minerals
2007 A. G. Bogatyreva
Reduction of dust load at technological processes of formation of dusty surfaces at quarries by foaming method
2007 Yu. V. Shuvalov, Yu. D. Smirnov
Nano-irregularities in plagioclases. Features of small-angle X-ray scattering from crystalline mineral powders
2007 A. P. Simakov