Submit an Article
Become a reviewer
Vol 199
Pages:
379-383
Download volume:
RUS
Article

Influence of magnetic field on the speed metal corrosion tubing rheological properties and product borehole

Authors:
M. K. Rogachev1
M. I. Kuzmin2
N. K. Kondrasheva3
About authors
  • 1 — Ph.D., Dr.Sci. professor National Mineral Resources University (Mining University)
  • 2 — post-graduate student National Mineral Resources University (Mining University)
  • 3 — Ph.D., Dr.Sci. professor National Mineral Resources University (Mining University)
Date submitted:
2011-11-05
Date accepted:
2012-01-22
Date published:
2012-12-29

Abstract

The paper deals with field and laboratory studies of the effect of a magnetic field on the rate of corrosion of metal tubing, and rheological studies to establish the dependence of properties of well production of the magnetic field. The laboratory results showed an increase in the rate of corrosion of the metal with the growth of its residual magnetization with and without inhibition by different amounts. The dependence of the magnetic field effect on the rheological properties of well products Urmanskoye field.

Область исследования:
(Archived) Geotechnology for development of liquid and gas mining fields
Keywords:
Complications during production corrosion well the tubing the magnetization of the metal the magnetic field
Funding:

None

Go to volume 199

References

  1. Alekseev Yu.V. Selection of corrosion resistant tubing to the conditions of deposit LLC «Gazpromneft-Vostok» // Engineering Practice. 2012. N 1.
  2. Bagrintseva K.I., Dmitrievski A.N., Bochco R.A. Atlas of carbonate reservoirs of oil and gas of the East European and Siberian platforms. Moscow, 2003.
  3. Freydlin M.O. Operation of the submersible oilequipment in a corrosive environment wells Urmanskoye deposit // Engineering Practice. 2010. N 6.

Similar articles

The prediction technics of tunnel sets with complex three dimensional configuration stress state with allowance for relative influence and building sequence
2012 A. G. Protosenya, N. A. Belyakov, A. D. Kuranov
Perspectives of further development of technics and technology of shafts building in Russia with consideration of world technologies
2012 V. A. Kurnakov, M. S. Pleshko
Land measuring in lay-out of forest lands
2012 V. F. Kovyazin
Methodology of the complex estimation of influence of tectonic disturbances on stability of the rock mass at mining of rock-bump hazardous ore deposits difficult geologic structure
2012 D. V. Sidorov
Application of laser scanning in the analysis of geometrical parameters object surface
2012 Yu. N. Kornilov, V. V. Kulesh
Rationale for assessing the degree of fracturing rock mass by gpr based on mathematical modeling
2012 V. V. Glazunov, S. M. Danilev