-
Date submitted2021-04-30
-
Date accepted2021-11-30
-
Date published2021-12-27
Methodology for testing pipeline steels for resistance to grooving corrosion
- Authors:
- Viktor I. Bolobov
- Grigoriy G. Popov
The methodology for testing pipeline steels is suggested on the assumption that for the destruction of pipes in field oil pipelines by the mechanism of grooving corrosion the simultaneous fulfillment of such conditions as the occurrence of scratches on the lower generatrix of the pipe, eventually growing into a channel in the form of a groove, emulsion enrichment with oxygen, presence of pipe wall metal in a stressed state, presence of chlorine-ion in the oil-water emulsion is required. Tests are suggested to be carried out in 3 % aqueous solution of NaCl with continuous aeration by air on bent plates 150×15×3 mm, made of the analyzed steel, the middle part of which is under the action of residual stresses σ res , close to the level of maximum equivalent stresses σ eqv in the wall of the oil pipeline, with the presence of a cut on this part on the inner side of the plate as an initiator of additional mechanical stresses. Using the value of the modulus of normal elasticity of the analyzed steel, the degree of residual strain of the elastic-plastic body from this material, corresponding to the value σ res ≈ σ eqv is calculated, based on which the plates are bent to the required deflection angle, after which the cut is applied to them. After keeping the plates in the corrosive medium for each of them the increase in depth of the cut as a result of corrosion of the walls by the corrosive medium is analyzed, from which the rate of steel K by the mechanism of grooving corrosion is calculated taking into account the duration of tests. Corrosion rate values for two pipe steel grades determined by the suggested procedure are given. The comparison of K values obtained leads to the conclusion about the higher resistance to grooving corrosion of 09G2S steel.
-
Date submitted2019-03-18
-
Date accepted2019-04-26
-
Date published2019-08-23
Spatial Models Developed Using Laser Scanning at Gas Condensate Fields in the Northern Construction-Climatic Zone
Wide exploration and industrial exploitation of hydrocarbon fields in Yamal Peninsula pose in front of construction and mining companies critical problems of efficient construction at constantly evolving fields taking into account climatic and geocryological conditions of their location. Yamal Peninsula is characterized by unstable soils, the mobility of which has a substantial impact on the changes in spatial arrangement of field facilities, not only in the direct process of construction, but also during their scale-up and equipment overhaul. The paper examines implementation of 3D spatial arrangement modelling of industrial facilities into the process of construction and installation works at hydrocarbon fields in the northern construction-climatic zone. The purpose of implementing this method combined with 3D spatial modelling of equipment connections lies in reliability and safety enhancement of the facilities throughout their entire lifespan. Authors analyze statement and solution of the problem associated with alignment and installation of prefabricated equipment and pipelines, taking into account advanced technologies of 3D design and modelling. The study examines a 3D spatial model with the elements of equipment connection geometry; the model is related to existing production facilities at the field. Authors perform an analysis and in mathematical terms formulate the problem of optimal spatial arrangement for such models. The paper focuses on typical deviations, occurring in the installation process of constructions and connection facilities, their spatial arrangement is modelled. Possible solutions are offered, as well as an algorithm of their implementation at an operating field.
-
Date submitted2018-01-17
-
Date accepted2018-03-09
-
Date published2018-06-22
Control and regulation of the hydrochloric acid treatment of the bottomhole zone based on field-geological data
- Authors:
- M. K. Rogachev
- V. V. Mukhametshin
The analysis results of the hydrochloric acid treatment of the bottomhole zone efficiency along the deposits of high-viscosity oil in the carbonate reservoirs of the Tournaisian stage are presented in the paper. Based on the use of the non-parametric Kulbak criterion, the most informative geological and technological parameters, which affect most the success of hydrochloric acid treatments, assessed by the criteria of increased oil production and reduced water cut, are revealed. The generalization of the hydrochloric acid treatments experience in the conditions of the high-viscosity oil reservoirs of the Tournaisian Stage allows for efficient forecasting, selection of wells, control and regulation of the treatment process to reduce the number of inefficient operations and improve the technical and economic parameters of fuel and energy enterprises at the investigated sites and the ones with similar field-geological characteristics.
-
Date submitted2009-10-12
-
Date accepted2009-12-29
-
Date published2010-09-22
Types and mechanisms of geodynamic hazard in mineral deposits mining and exploitation of buried and surface engineer constructions
- Authors:
- A. N. Shabarov
It is shown that major emergencies in mineral deposits mining and in exploitation of buried and surface engineer constructions are attributed to active faults. Classification of hazardous zones has been developed. The mechanisms of influence of geodynamic hazard in coal mines and pipeline exploitation were determined. The technology of reduction of geodynamic risk was suggested.
-
Date submitted2009-10-18
-
Date accepted2009-12-05
-
Date published2010-09-22
Assessment of the role of geodynamic factor in the accident rate of pipeline systems
- Authors:
- E. K. Melnikov
- A. N. Shabarov
The authors relate to the geodynamically active faults those faults with continuous up to present time low-amplitude movements which lead to the destructurization both of bedding rocks and of Quarternary deposits. The electrogeochemical processes proceeding in the zones of such faults, promote the metal corrosion that basically is the cause of increasing a few tens of times of specific accident rate at sites of active faults crossing with pipelines.