-
Date submitted2022-04-13
-
Date accepted2023-02-15
-
Date published2023-08-28
The impact of secondary mineral formation on Na-K-geothermometer readings: a case study for the Valley of Geysers hydrothermal system (Kronotsky State Nature Biosphere Reserve, Kamchatka)
The temperature in the Valley of Geysers (Kamchatka) geothermal reservoir calculated using the feldspar Na-K-geothermometer has been steadily increasing over the past 10 years on average from 165 to 235 °C, which is close to the temperature values of a hydrothermal explosion of the steam and water mixture. For the analysis of chemical geothermometers, TOUGHREACT-simulation was used, with the help of which the previously known Na-K feldspar geothermometer was reproduced on a single-element model and new formulas were obtained for three Na-K geothermometers: zeolite, smectite, and based on volcanic glass. Data of chemical analysis for the period 1968-2018, in which the chloride ion is considered as an inert tracer of geofiltration processes, indicates that after 2007 a significant inflow of infiltration water (its mass fraction is estimated from 5 to 15 %) into the Geyser reservoir. It is assumed that the Na-K increased values of the feldspar geothermometer are not the result of the temperature increase in the Geyser reservoir, but the effect of smectite water dilution.
-
Date submitted2021-09-17
-
Date accepted2022-04-07
-
Date published2022-12-29
Technique for calculating technological parameters of non-Newtonian liquids injection into oil well during workover
Technique for automated calculation of technological parameters for non-Newtonian liquids injection into a well during workover is presented. At the first stage the algorithm processes initial flow or viscosity curve in order to determine rheological parameters and coefficients included in equations of rheological models of non-Newtonian fluids. At the second stage, based on data from the previous stage, the program calculates well design and pump operation modes, permissible values of liquid flow rate and viscosity, to prevent possible hydraulic fracturing. Based on the results of calculations and dependencies, a decision is made on the necessity of changing the technological parameters of non-Newtonian liquid injection and/or its composition (components content, chemical base) in order to prevent the violation of the technological operation, such as unintentional formation of fractures due to hydraulic fracturing. Fracturing can lead to catastrophic absorptions and, consequently, to increased consumption of technological liquids pumped into the well during workover. Furthermore, there is an increased risk of uncontrolled gas breakthrough through highly conductive channels.
-
Date submitted2021-03-18
-
Date accepted2021-09-10
-
Date published2021-12-16
Development of blocking compositions with a bridging agent for oil well killing in conditions of abnormally low formation pressure and carbonate reservoir rocks
- Authors:
- Dmitrii V. Mardashov
Production well killing before workover operations in late-stage oil and gas-condensate fields can be complicated by abnormally low formation pressure, carbonate type of reservoir rocks, and high gas-oil ratio. These complications lead to the intensive absorption of technological fluids by the formation and gas ingresses, which, in its turn, increases the time of killing wells and putting them on production, reduction of productivity, and additional costs. Therefore, it is crucial to develop a high-performance well-killing composition that would allow improving the efficiency of killing wells in complicated geological, physical, and technological conditions at the expense of reliable overlapping of the perforation interval (or open wellbore) to prevent gas intakes and gas outflow from the formation. To develop blocking compounds, a set of laboratory tests has been carried out, including physical and chemical (determination of density, viscosity, thermal stability, sedimentation stability, etc.) and research of blocking and filtration properties of compositions during simulation of a fractured reservoir. In the course of laboratory tests, the choice of fractional composition and polymer filler concentration was substantiated in the blocking emulsion and polymer compositions to increase the efficiency of their application under the complicated conditions of killing oil wells. As a result of laboratory research and field tests, the emulsion and polymer blocking compositions containing bridging agent (microcalcite) were developed, which increase the oil well killing efficiency by preventing the absorption of technological fluids in the formations and, as a result, preserving its productivity.
-
Date submitted2020-05-29
-
Date accepted2020-09-16
-
Date published2020-11-24
Numerical modeling of a double-walled spherical reservoir
Extensive and important class of multilayer shell structures is three-layer structures. In a three-layer structure, a rigid filler plays an important role, due to which the bearing layers are spaced that gives the layer stack high rigidity and durability with a relatively low weight. By combining the thicknesses of the bearing layers and the filler, the desired properties of a three-layer shell structure can be achieved. Compared with traditional single-walled, three-layer construction has increased rigidity and durability, which allows reducing the thickness and weight of the shells. In order to reduce the metal content of the spherical reservoir for storing liquefied gases, this work considers the design of a double-walled reservoir, in which the inter-wall space is filled with reinforced polyurethane. Numerical modeling made it possible to determine the parameters of the stress-strain state of the structure with an error of no more than 5 %. It has been established on the example of a reservoir with a volume of 4000 m 3 that the spatial structure of the spherical reservoir wall can reduce the metal content up to 19 %. Field of application for the research results is the assessment of the stress-strain state of spherical reservoirs at their designing. Method for building the structure of a double-walled spherical reservoir in the SCAD software has been developed, which allows calculating the stress-strain state (SSS) by the finite element method. Numerical model of a double-walled spherical reservoir has been developed. It was found that to obtain calculation results with an error of P ≤ 5 % the size of the final element should not exceed 300×300×δ mm. Design of a double-walled spherical reservoir was investigated. Design parameters have been established to ensure the operational reliability of the structure with a decrease in metal content in comparison with a single-wall reservoir by 19 %.
-
Date submitted2019-12-20
-
Date accepted2020-09-01
-
Date published2020-10-08
Features of the underground storages construction in depleted oil and gas condensate fields
The paper considers the features of the underground storages (US) construction in depleted oil and gas condensate fields (DOGCFs). The requirements for the structure of the formation, corresponding to the parameters of the object for possible US creation are presented. The influence of geological, hydrogeological, mining and technical rock formation conditions on the reliability and tightness of underground storages, including underground gas storages, has been evaluated. The necessary conditions for the US design are analyzed at the example of the Ach-Su oil and gas condensate field, in the presence of a well-explored trap with acceptable parameters for the construction of an underground storage. An important aspect is the geological conditions that meet the criteria for selecting the object: the required structure, the absence of fracturing faults, high reservoir properties of the formation, a sufficient volume of the deposit for the storage. Geological conditions lay the basis for determining the individual characteristics of the US construction technology at each DOGCF. The refined results for the current gas-saturated pore volume and the rate of pressure drop in the formation are presented, which makes it possible to select improved technological indicators in the course of operation of the created US. In order to select the optimal option for the design and construction of the US, the results of economic and geological scenarios analysis were studied concurrently with the capabilities of the technological operation of the object and transport system, which can ensure the maximum daily production of the storage.
-
Date submitted2020-06-11
-
Date accepted2020-06-11
-
Date published2020-06-30
Mathematical model of the liquefied methane phase transition in the cryogenic tank of a vehicle
In order to increase the efficiency of using vehicles (VEH) in mining and quarrying conditions, it is necessary to improve the components of gas equipment (cryogenic tank, gas nozzles, fuel supply cryogenic tubes, etc.) for supplying liquefied natural gas to the engine, as well as storage of liquid methane in a cryogenic tank with a long service life. For this, it is necessary to consider the process of heat and mass transfer of liquefied natural gas in a two-phase liquid-gas medium, taking into account the phase transition in the closed volume of the cryogenic tank under consideration. The article presents a model of unsteady heat and mass transfer of a two-phase liquefied methane medium in a developed two-tank cryogenic tank using a Cartesian coordinate system with fractional control volumes in space. The experimental data confirm the efficiency of using a cryogenic tank on the VEH platform, in which the run on liquefied methane compared to standard fuels is tripled, the shelf life of liquefied gas in the proposed cryogenic tank is 2-2.5 times longer than in the standard one.
-
Date submitted2020-05-06
-
Date accepted2020-05-24
-
Date published2020-06-30
Revisiting the evolution of deformation zones under platform conditions in the case study of the Kungur Ice Cave (Cis-Urals)
- Authors:
- Nataliya V. Lavrova
Observations in mining tunnels and caves allow to identify composition and development specifics of fault structures under subsurface conditions at various stages of geological history. Basing on the existing formation model of Kungur Ice Cave karst system, author examines the transformations of deformation zones, occurring in the mass of interlaid sulfate and carbonate rocks under platform conditions. Morphologic specifics of vertical structures – organ pipes, developed within one of the gypsum-anhydrite units, are defined by evolution stages of disjunctive faults, penetrating the entire rock mass of the Ice Cave. Point infiltration of surface waters and formation of a single channel, where rock softening and taluses from overlapping deposits gradually occur, are currently considered to be the initiators of pipe formation. At a later stage a sink forms on the surface, increasing the amount of water coming to the karsting mass. However, the size of debris in the talus, incommensurate with the pipe head, rounded arches of separate pipes, fragments of feeder channels, characteristic for artesian conditions of underground water circulation, faceted rock debris from overlapping deposits, specifics of wall structure all define the priority of pipe formation over grottos and cave galleries. Plastic properties of gypsum sediments and processes of their hydration define secondary modifications of pipe walls up to complete filling of the voids and formation of secondary pillars with subsequent renewed formation of vertical channels – significantly smaller in diameter and formed by infiltration waters when subject to corrosion.
-
Date submitted2018-07-21
-
Date accepted2018-09-14
-
Date published2018-12-21
Natural ventilation of gas space in reservoir with internal floating roof
- Authors:
- M. G. Karavaichenko
- N. M. Fathiev
The article deals with safe operation issues of vertical steel reservoirs with an internal floating roof when storing volatile oil products. The purpose of the work is to study the influence of ventilation openings area and wind speed on the duration of explosive state of vertical reservoirs with an internal floating roof. The influence of ventilation pipes' dimensions and the wind speed on the duration of explosive state of the reservoir has been studied. Method for calculating this time is proposed. It is shown that natural ventilation of the reservoir gas space is caused by the effect of two forces, which are formed due to: 1) the density difference between the vapor-air mixture in the reservoir and outside air; 2) wind pressure occurring on the roof of the reservoir. An algorithm for calculating the duration of reservoir being in an explosive state with wind pressure and no wind is obtained. The greater the difference in geodetic marks of the central and peripheral nozzles, the more efficient the ventilation. This distance will be greatest if the lower ventilation pipes are located on the upper belt of the reservoir or the reservoir is equipped with an air drain. Increase in wind speed of more than 10 m/s does not significantly affect the duration of the reservoir being in an explosive state. Increasing the diameter of the central nozzle from 200 to 500 mm can significantly reduce the duration of the reservoir degassing in windless weather.
-
Date submitted2009-08-15
-
Date accepted2009-10-19
-
Date published2010-02-01
Modern magnetic quality monitoring and the forecast of the technical condition of engineering constructions
- Authors:
- A. N. Lyubchik
On terrain of Russia act a system of mains by a general expansion more than 200 thousand km. More than halves oil and gas pipelines are in exploitation 25-35 years, i.e. demand immediate repeated examination and conforming preventive maintenance. Intraube magnetic or the ultrasonic flaw detection for these purposes is not always possible and is dear enough, therefore last years a urgency of application of remote geophysical methods has increased at service oil and gaspipeline of the transport sharply. These methods are express enough and more economic.