-
Date submitted2023-07-25
-
Date accepted2024-05-02
-
Date published2024-08-26
Finite element analysis of slope failure in Ouenza open-pit iron mine, NE Algeria: causes and lessons for stability control
Slope failures in mining engineering pose significant risks to slope stability control, necessitating a thorough investigation into their root causes. This paper focuses on a back analysis of a slope failure in the Zerga section of the Ouenza – Algeria open-pit iron mine. The primary objectives are to identify the causes of slope failure, propose preventive measures, and suggest techniques to enhance stability, thereby providing crucial insights for monitoring slope stability during mining operations. The study commenced with a reconstruction of the slopes in the affected zones, followed by a numerical analysis utilizing the Shear strength reduction method within the Finite element method (SSR-FE). This approach enables the examination of slope stability under both static and dynamic loads. The dynamic load assessment incorporated an evaluation of the vibrations induced by the blasting process during excavation, introducing seismic loading into the finite element analysis. The findings reveal that the primary triggering factor for the landslide was the vibration generated by the blasting process. Furthermore, the slope stability was found to be critically compromised under static loads, highlighting a failure to adhere to exploitation operation norms. The challenging geology, particularly the presence of marl layers where maximum shear strain occurs, contributed to the formation of the landslide surface. The study not only identifies the causes of slope failure but also provides valuable lessons for effective slope stability management in mining operations.
-
Date submitted2020-11-16
-
Date accepted2021-03-02
-
Date published2021-04-26
Determination and verification of the calculated model parameters of salt rocks taking into account softening and plastic flow
The article suggests using a combination of the modified Burgers model and the Mohr – Coulomb model with the degradation of the adhesion coefficient and the increase in the friction coefficient to determine the parameters of salt rocks. A comparative analysis of long-term laboratory tests and field observations in underground mine workings with the results obtained using a calculated model with certain parameters is carried out. The parameters of the Mohr – Coulomb model with the degradation of the adhesion coefficient and the increase in the friction coefficient were obtained from the statistically processed data of laboratory tests, and the parameters of the modified Burgers model were determined. Using numerical methods, virtual (computer) axisymmetric triaxial tests, both instantaneous and long-term, were performed on the basis of the proposed model with selected parameters. A model problem is solved for comparing the behavior of the model with the data of observation stations in underground mine workings obtained from borehole rod extensometers and contour deformation marks. The analytically obtained coefficients of the nonlinear viscous element of the modified Burgers model for all the analyzed salt rocks did not need to be corrected based on the monitoring results. At the same time, optimization was required for the viscoelastic element coefficients for all the considered rocks. The analysis of the model studies showed a satisfactory convergence with the data on the observation stations. The comparative analysis carried out on the models based on laboratory tests and observations in the workings indicates the correct determination of the parameters for salt rocks and the verification of the model in general.
-
Date submitted2019-09-29
-
Date accepted2020-02-24
-
Date published2020-04-24
Vs sustainable development: scenarios for the future
Issues of sustainable development began to concern mankind starting from the 20th century, when mass industrialization and the depletion of natural resource potential contributed to the formulation of environmental issues at one of the leading places in scientific discourse. However, what if the goals of sustainable development would not be achieved to 2030? What other way we can identify for humanity to survive? So, the study is about the problems of studying the understanding of the term “sustainable development”, considering the evolution of the formation of the concept of sustainable development and analyzing the modern goals of sustainable development for attainability. From an analysis of domestic and foreign experience, possible scenarios of the development of mankind are identified (such as 1. Creating an environmental framework, 2. Implementation of sustainable nature management practices in the conditions of natural and man-made objects, 3. Implementation of “geoengineering projects”, 4. Construction of autonomous ecosystems, 5. Space exploration in search of a new planet for life, provided that the goals of sustainable development would not be achieved. It has been established that today probability of achieving all the sustainable development goals by 2030 is too small, and the indicated scenarios require, firstly, the development of science and technology, and secondly, a competent assessment of the value of nature and solving the issue of specifying property rights for natural goods.
-
Date submitted2009-09-29
-
Date accepted2009-11-20
-
Date published2010-06-25
Organization of the closed system of circulating water at high content of phosphates in used water
- Authors:
- R. D. Pavlov
- Yu. V. Sharikov
the method of circulating industrial waters treatment from metallurgical works with high content of phosphates is considered. It includes treatment via reagent precipitation with alkalization and flocculant addition, filtration of residue on a press-filter, further purification of water on a filter with granular loading, purification from residual calcium on an ion-exchange filter, neutralization of softened water and its final desalting in the unit of reverse osmosis.
-
Date submitted2009-08-24
-
Date accepted2009-10-12
-
Date published2010-02-01
Control system for waste treatment of metallurgical works with use of membrane methods
- Authors:
- R. D. Pavlov
In work considered application of baromembrane methods for waste treatment of metallurgical works, basic laws of baromembrane processes. On basis of adduced laws defined basic tasks of control system, mode of working and quality indexes of operation membrane complex.