-
Date submitted2022-05-12
-
Date accepted2022-11-17
-
Date published2023-04-25
Microbiological remediation of oil-contaminated soils
- Authors:
- Irina D. Sozina
- Aleksandr S. Danilov
Microbiological remediation is a promising technology for the elimination of environmental contamination by oil and petroleum products, based on the use of the metabolic potential of microorganisms. The issue of environmental contamination by crude oil and its refined products is relevant in the Russian Federation since the oil industry is one of the leading sectors of the country. Mechanical and physico-chemical methods of treatment are widely used to clean oil-contaminated soils. However, the methods belonging to these groups have a number of significant drawbacks, which actualizes the development of new methods (mainly biological), since they are more environmentally friendly, cost-effective, less labor-intensive, and do not require the use of technical capacities. Various bio-based products based on strains and consortia of microorganisms have been developed that have proven effectiveness. They include certain genera of bacteria, microscopic fungi, and microalgae, substances or materials acting as sorbents of biological agents and designed to retain them in the soil and increase the efficiency of bioremediation, as well as some nutrients. Statistical data, the most effective methods, and technologies, as well as cases of using microorganisms to restore oil-contaminated soils in various climatic conditions are presented.
-
Date submitted2021-09-16
-
Date accepted2022-02-24
-
Date published2022-04-29
Production of microfluidic chips from polydimethylsiloxane with a milled channeled surface for modeling oil recovery during porous rock waterflooding
Microfluidic chips with porous structures are used to study the flow of oil-containing emulsion in the rock. Such chips can be made from polydimethylsiloxane by casting into a master mold. At the initial stages of research, fast and cheap prototyping of a large number of different master molds is often required. It is proposed to use milling to make a channeled surface on a polymethyl methacrylate plate, from which a negative image should be taken, which is the master mold for casting positive polydimethylsiloxane chips in it. Several epoxy compositions have been tested to make this master mold. The main requirement in the search for the material was the exact replication of the geometry and sufficiently low adhesion to polymethyl methacrylate and polydimethylsiloxane for removing the product with minimal damage to the mold. It was possible to make master molds from all the materials used, but with defects and various degrees of damage. One of the epoxy compositions was found suitable for making a master mold with many elements simulating the grains of a porous medium (height to width ratio 2:3). The developed method makes it possible to use polydimethylsiloxane for prototyping chips simulating the porous structure of an oil rock.
-
Date submitted2021-04-15
-
Date accepted2021-07-27
-
Date published2021-10-21
Analysis of the application and impact of carbon dioxide media on the corrosion state of oil and gas facilities
Products of several currently operated production facilities (Bovanenkovskoye, Urengoyskoye oil and gas condensate fields, etc.) contain an increased amount of corrosive CO 2 . Effect of CO 2 on the corrosion of steel infrastructure facilities is determined by the conditions of its use. Carbon dioxide has a potentially wide range of applications at oil and gas facilities for solving technological problems (during production, transportation, storage, etc.). Each of the aggregate states of CO 2 (gas, liquid and supercritical) is used and affects the corrosion state of oil and gas facilities. Article analyzes the results of simulation tests and evaluates the corrosion effect of CO 2 on typical steels (carbon, low-alloy and alloyed) used at field facilities. The main factors influencing the intensity of carbonic acid corrosion processes in the main conditions of hydrocarbon production with CO 2 , storage and its use for various technological purposes are revealed. Development of carbon dioxide corrosion is accompanied and characterized by the localization of corrosion and the formation of defects (pitting, pits, etc.). Even alloyed steels are not always resistant in the presence of moisture and increased partial pressures of CO 2 , especially in the presence of additional factors of corrosive influence (temperature, aggressive impurities in gas, etc.).
-
Date submitted2020-01-10
-
Date accepted2020-01-14
-
Date published2020-02-25
Biogeochemical assessment of soils and plants in industrial, residential and recreational areas of Saint Petersburg
Soils and plants of Saint Petersburg are under the constant technogenic stress caused by human activity in industrial, residential, and recreational landscapes of the city. To assess the transformed landscapes of various functional zones, we studied utility, housing, and park districts with a total area of over 7,000 hectares in the southern part of the city during the summer seasons of 2016-2018. Throughout the fieldwork period, 796 individual pairs of soil and plant samples were collected.A complex of consequent laboratory studies performed in an accredited laboratory allowed the characterization of key biogeochemical patterns of urban regolith specimens and herbage samples of various grasses. Chemical analyses provided information on the concentrations of polluting metals in soils and plants of different land use zones.Data interpretation and calculation of element accumulation factors revealed areas with the most unfavorable environmental conditions. We believe that a high pollution level in southern city districts has led to a significant degree of physical, chemical, and biological degradation of the soil and vegetation cover. As of today, approximately 10 % of the Technosols in the study area have completely lost the ability to biological self-revitalization, which results in ecosystem malfunction and the urgent need for land remediation.
-
Date submitted2019-01-17
-
Date accepted2019-03-05
-
Date published2019-06-25
Geological and geomechanical model of the Verkhnekamsk potash deposit site
- Authors:
- Yu. A. Kashnikov
- A. O. Ermashov
- A. A. Efimov
Major accidents at OJSC Uralkali raised the question of the need for a detailed study of the geological structure of the Verkhnekamskoye potassium salt deposit, the identification of anomalous complex zones in the oversalt rocks and, above all, in the water-blocking layer (WBL). The article proposes a method for isolating weakened zones in the WBL and potash reservoirs, based on the combined use of geomechanical (laboratory core tests) and geophysical (acoustic broadband logging in wells and surface seismic exploration) studies. It also describes the method of zoning of WBLand potash reservoirs on the physical and mechanical properties to obtain their specific values. This technique will help solve the most urgent problem of ensuring industrial safety in the development of the Verkhnekamskoye potassium salt deposit (the safety of the WBL). The implementation of the proposed method is considered for the Romanovsky site of the Verkhnekamskoye deposits of potassium and magnesium salts. The research included 2D seismic explorations, physical and mechanical properties testing, and finding statistical dependencies between static and dynamic geomechanical parameters. Based on the processing of seismic materials and the obtained dependencies, a geological and geomechanical model of this area was created, and zones with different physicomechanical properties were identified.
-
Date submitted2015-08-17
-
Date accepted2015-10-25
-
Date published2016-04-22
Ecological aspects of vehicle tunnels ventilation in the conditions of megalopolises
- Authors:
- S. G. Gendler
The characteristic of Russia and foreign vehicle tunnels are provided in paper and advantages of their placement in the conditions of the city are noted. It is shown that one of the main factors defining negative impact on environment in the period of tunnels driving is mine equipment, and at operation – vehicles. The analysis of essential differences of features of pollution of atmospheric air at construction of tunnels from its pollution at construction of buildings on a surface is given. The examples illustrating levels of negative impact of the upcast ventilation shaft airflow on atmospheric air are given and the ventilation schemes reducing this influence are offered. It is shown that during operation of road tunnels of pollution of the air environment can extend on considerable distances from tunnel portals. Numerical calculations of concentration of carbon oxides and nitrogen during removal of the upcast ventilation shaft airflow through portals and through the mines built near them are executed. Technical solutions on purifications of tunnel air by means of electrostatic filters are described.
-
Date submitted2015-08-09
-
Date accepted2015-10-05
-
Date published2016-04-22
Inorganic and organic vitreous foam materials and prospect of environmental cleaning from oil and oil products pollutions
- Authors:
- V. E. Kogan
The analysis of own experimental materials which are part of the new scientific direction – complex research of physical and chemical regularities of novel inorganic and organic vitreous sorbents and investigation of the oil and oil products absorption processes by that sorbents developed on department of the General and Physical Chemistry of National Mineral Resources University (Mining University) under the leadership of the author of this paper is provided. In particular, specifics of kinetic curves of oil absorption for sorbents with a vitreous surface are experimentally established and theoretically proved by the conducted researches.
-
Date submitted2015-07-14
-
Date accepted2015-09-09
-
Date published2016-02-24
Engineering and geomechanical forecast for waste disposal in underground caverns including earthquake-prone zones
- Authors:
- O. V. Kovalev
The article aims at obtaining representative scientifically based data to determine parameters of a necessary-safe condition of the rock massif (RM) in underground waste diposal caverns zones, including earthquake-prone zones. The main requirements for underground caverns for hazardous waste disposal and for their construction technology are described. The subject of the research is underground solution caverns in halogen rocks. Data for justification of safe waste disposal conditions in underground salt caverns and its stages are presented. A complex approach to the solution of the research problem is described. The main aspects of dynamic influence of seismic waves on underground caverns stability are considered. Taking into account seismic-risk zoning data on the research region some significant parameters of a possible seismic impact on the experimental cavern are calculated. The article points out the necessity of superincumbent rock and surface displacement assessment for the experimental site zone using the suggested complex approach and including the analysis of surveying data and results of rock mass geomechanical modeling.
-
Date submitted2013-07-13
-
Date accepted2013-09-21
-
Date published2014-03-17
Modern technology of consumption waste management in the mining agglomeration
- Authors:
- M. Sh. Barkan
- A. B. Makhovikov
- E. I. Kabanov
Any industrial agglomeration is a territory, not only with a high concentration of industrial facilities, but also with high population density. This, in turn, is an essential prerequisite to problems associated with the large volume of waste consumption. To solve these problems it is necessary not only to improve the technology for processing different kinds of waste, but also to establish a system by their rapid collection and transport.
-
Date submitted2010-07-23
-
Date accepted2010-09-18
-
Date published2011-03-21
Amplitude-phase correction of additional MT impedance curves for two dimensional structures
- Authors:
- E. Yu. Ermolin
The regularities of the amplitudes and phases connections of MT-impedance tensor components for 2D geoelectrical synthetic models have been considered. The amplitude-phase correction (APC) allows to improve the quality of data processing results both for the main and for the additional impedances. It also gives a possibility to suppress biased data for noise pollution data. Recommendations on accuracy rising of determination of tensor impedance components in the MT-data processing have been defined on the base of found regularities.
-
Date submitted2008-11-23
-
Date accepted2009-01-30
-
Date published2009-12-11
The estimate of the utilization’s efficiency of the production waste products, which appeared as a result of the preservation of the environment measures
- Authors:
- E. M. Pronin
Nowadays the problems of the stable growth of mineral and source of raw materials and fuel and energy complex industries are attached great importance to, since it influences the country social-economic condition. In its turn the development of the mining industry requires opening up new lands, which are especially vulnerable to different kinds of anthropogenous and technogenous factors. The changes in the state of economic system have excluded the lowering expenditure by the economy of the production scale. The typical features of a new economy became the progress of free competition and intensive demonopolization. At the same time for the mining industry it is significant that large-scale enterprises should be the foundation of many cities economies of the Russian Federation. For the way out of a system crisis it is necessary to change the strategy – to alter not only the condition of the system, but its management. The formation of the mining complexes permits to use sources of raw materials of the exploited deposits in the proper way, to process waste products of the basic production into the commodity output, to raise the efficiency and cut costs of the preservation of the environment measures from concentration waste products, exhaust solutions, gases, warm water harmful influence on the environment. The practical use of the production waste products of the mining complexes is unprofitable and makes sense only because of its opportunity partially compensating the aggregate investments for the preservation of the environment. The estimate of the utilization s efficiency of the production waste products has made.