Development of sealing and lubrication systems for bearings of high-speed roller bits
Authors:
About authors
- 1 — Ufa State Oil Technical University, OAO Uralburmach
- 2 — Ufa State Oil Technical University, OAO Uralburmach
- 3 — Ufa State Oil Technical University, OAO Uralburmach
- 4 — Ufa State Oil Technical University, OAO Uralburmach
- 5 — Ufa State Oil Technical University, OAO Uralburmach
- 6 — Ufa State Oil Technical University, OAO Uralburmach
Abstract
Unprecedentedly difficult operating conditions of roller cone bit bearings, leading in many cases to their failure at the initial stage of operation, require not only a detailed study of operation and wear of individual elements of the bearings, but also further search for ways to improve them.
Область исследования:
(Archived) Without section
Funding:
None
Similar articles
Expert method of reducing uncertainty in seismic safety calculations of blasting operations
2001 V. A. Belin, D. K. Potresov, N. I. Bukhanova
Assessment of the level of acoustic effect from an open pit explosion
2001 M. G. Egorov, V. A. Artemov, V. A. Mikhailov
Determination of strength and abrasiveness of rocks by the spectrum of acoustic noise during drilling and cutting
2001 A. G. Arkhipov
Development of technical means to improve the safety of blasting operations in mines, hazardous in gas and dust
2001 Yu. V. Gorlov