Lidar method for remote measurement of oil film thickness on water surface
About authors
- 1 — R&D Institute of Electronics and Laser Technology, Bauman Moscow Technical University
- 2 — R&D Institute of Electronics and Laser Technology, Bauman Moscow Technical University
- 3 — R&D Institute of Electronics and Laser Technology, Bauman Moscow Technical University
- 4 — R&D Institute of Electronics and Laser Technology, Bauman Moscow Technical University
- 5 — R&D Institute of Electronics and Laser Technology, Bauman Moscow Technical University
Abstract
The problem of remote measurement of the thickness of oil films on water surface is considered and the method of remote control of oil pollution, based on the use of wavelength-tunable laser, measurement of the intensity of the reflected signal from the wavelength and application of a special algorithm for processing the results of laser measurements, is developed. It is shown that the developed method of remote control and algorithms of processing the received signals for the laser meter allow to establish the thickness of films of oil products on water surface (including the agitated sea surface) with an acceptable accuracy.
Область исследования:
(Archived) Problems of environmental monitoring and environmental safety
Similar articles
Decontamination of industrial effluents containing aromatic compounds using sound chemistry
2003 A. I. Kiprianov
Determination of the degree of influence of the land surface relief on the stress-strain state of the rock mass and the parameters of mine workings
2003 Yu. A. Borovkov
Condition monitoring and management of environmentally hazardous facilities in mining and mineral processing
2003 M. A. Sereda