Technology of fabrication in relation to microstructure of Ni-Ti shape memory alloys
About authors
- 1 — VSB-Technical University of Ostrava
- 2 — VSB-Technical University of Ostrava
Abstract
This article deals with the production of shape memory Ni-Ti alloys in a plasma furnace and a vacuum induction furnace. Flattening and drawing were then carried out to produce wires that will be used to measure transformation temperatures.
Область исследования:
Metallurgy
Funding:
None
Similar articles
Analysis of ecological situation in the zone of influence of the large cement plant and technical solution for its improvement
2008 N. N. Safarova, Yu. P. Sorokin
Development and application of 3D-model of the territory for making optimal management decisions
2008 I. V. Ilinykh
Waterproofing compound for limiting water inflow into producing oil wells
2008 I. N. Diyarov, N. Yu. Bashkirtseva, R. R. Agliullin
Investigation of the possibilities of water-gas influence on the reservoir using pump-ejector units
2008 D. I. Popov