Submit an Article
Become a reviewer
Vol 198
Pages:
122
Download volume:

Provision of geodynamic safety in mining the Barentsburg coal deposit

Authors:
M. V. Shvankin1
M. A. Rozenbaum2
Yu. Ya. Minin3
V. P. Stetsenko4
A. V. Bondarev5
About authors
  • 1 — National Mineral Resources University (Mining University)
  • 2 — National Mineral Resources University (Mining University)
  • 3 — National Mineral Resources University (Mining University)
  • 4 — «Saint Petersburg Hyproshakht-XT» Ltd
  • 5 — State Trust «Arcticugol»
Date submitted:
2011-10-05
Date accepted:
2011-12-08
Date published:
2012-04-01

Abstract

The minable seam «Verkhny» within the Barentsburg coal deposit is geodynamically hazardous, its geodynamic phenomena manifest itself in the form of proper rock bursts,  shocks in the marginal zones and dynamic faults of  ground. Due to rockburst-hazardous situation the application of the areal relief of rock mass with transition to technological variants of mining with leaving the extended rib pillars at the boundary with the mined-out space, with their cutting by drivage of additional working is applied. Consideration  is  given  to the recommended  variants of pillar leaving  with  the data  of their assignment and applicability to geological-and-mining conditions of mine field sections. Description is given to the calculation of pillar sizes and parameters used for their calculations. Some examples are given of pillar leaving at different sections of mine field with geometrical parameters as well as the information is given on the seam extraction with prospecting  routes (paths) with leaving the support rib and barrier pillars. The leaving of safety support and barrier pillars with substantiation of their sizes is recommended as the method for providing the safe condition  of mining the «Verkhny» coal seam

Go to volume 198

References

  1. Методическое руководство по выбору геомеханических параметров технологии разработки угольных пластов короткими забоями / ВНИМИ. СПб, 2003. 56 с.
  2. Пат. 2296859 Россия, (51) МПК Е 21 С 41/16. Способ разработки пологих и наклонных удароопасных пластов / Д.В.Яковлев, М.А.Розенбаум и др. № 2005125297/03; Заявлено 10.08.2005; Опубл. 10.04.2007. Бюл. № 10, Приоритет 10.08.2005.
  3. Пат. 2224890 Россия, (51) МПК7 Е 21 С 41/18. Способ разработки пологих и наклонных удароопасных пластов / М.В.Шванкин, А.В.Кузнецов, Ю.Я.Минин. № 2002124540/03; Заявлено 17.09.2002; Опубл. 27.02.2004, Бюл.№ 6. Приоритет 17.09.2002.
  4. Руководство по предупреждению геодинамических явлений при разработке угольных пластов Баренцбургского месторождения / BНИМИ. СПб, 2009. 56 с.

Similar articles

Modern information technologies in designing and planning of mining operation
2012 A. Yu. Zvonar, A. M. Gortsuev
The method of potash salt interchamber pillars stability control
2012 A. A. Baryakh, V. A. Asanov, I. A. Sanfirov
Mechanizатion of steep thick coal seams working
2012 L. F. Kozhukhov, K. V. Struk
The design decision of technology of polymetallic ores enrichment in copper concentrating factory of MDK «Khandiza»
2012 P. I. Kalandrov, B. I. Iskandarov, B. S. Abriev
Feasibility study of optimal parameters of pillars in designing rockburst-hazardous ore deposits development
2012 D. V. Sidorov, T. V. Ponomarenko
Experience in expert systems application for estimation of stress- strain state of rock mass for selection of safe methods of ore deposits mining
2012 A. A. Kozyrev, V. I. Panin, I. E. Semenova