Modern monitoring systems of displacements and deformations at building of underground constructions
About authors
- 1 — Ph.D. associate professor National Mineral Resources University (Mining University)
- 2 — post-graduate student National Mineral Resources University (Mining University)
- 3 — National Mineral Resources University (Mining University)
Abstract
In article the information on the modern systems of monitoring intended for control of a deformation condition of rocks and buildings, being in a zone of influence of mountain works is stated. Principles and features of work of some types of gages and systems are stated. Problems with introduction of such systems in Russia are specified. The urgency of carry- ing out special scientific and applied researches for maintenance of introduction of such systems at realization of actions for protection of buildings and constructions is shown.
Область исследования:
(Archived) Mine survey
Keywords:
monitoring of displacement
monitoring of deformations of the rocks
the automated systems of measurement of deformations
systems in chinks
extensometers
inclinometers
measuring instrument of inclinations
Funding:
None
References
- Manual for design measures for protection of buildings and structures exploited by the influence of mining operations in the construction of the underground in Leningrad / VNIIGalurgia. Leningrad, 1973. 30 p.
- Instruction on surveillance over surface displacements and facilities placed over it underground construction in Moscow (RD 07-166-97) / Gosgortechnadzor of Russia; STS «Industrial safety». Moscow, 1997. 12 p.
Similar articles
The technics of mutual influenced tunnel’s temporary support stress-strain state prediction with allowance for building technology
2012 A. G. Protosenya, N. A. Belyakov
Formation and development of mining-and-geological processes in relation to changes in engineering-geological and hydrogeological conditions on Yakovlevsky mine
2012 R. E. Dashko, E. N. Feller
Application of laser scanning in the analysis of geometrical parameters object surface
2012 Yu. N. Kornilov, V. V. Kulesh